Shift of biofilm and suspended bacterial communities with changes in anode potential in a microbial electrolysis cell treating primary sludge

Direct interspecies electron transfer enables anaerobic oxidation of sulfide to elemental sulfur coupled with CO2-reducing methanogenesis

Electric syntrophy between fatty acid oxidizers and methanogens through direct interspecies electron transfer (DIET) is essential for balancing acidogenesis and methanogenesis in anaerobic digestion. Promoting DIET using electrically conductive additives proved effective in enhancing methanogenesis; however, its possibility to affect other microbial redox reactions in methanogenic systems has been little studied. This study provides the first confirmation of the electro-syntrophic coupling of sulfide oxidation to S0 with CO2-reducing methanogenesis in sulfur-rich methanogenic cultures supplemented with conductive magnetite (100-700-nm particle size). The H2S content in biogas, initially exceeding 5000 ppmv, decreased to below 1 ppmv along with an accumulation of extracellular S0 (60-70 mg/L; initially <1 mg/L) at a magnetite dose of 20 mM Fe, while there were no significant changes in methane yield. A comprehensive polyphasic approach demonstrated that the S0 formation occurs through electro-syntrophic oxidation of sulfide coupled with CO2-reducing methanogenesis, involving Methanothrix as the dominant methanogen.

Dark fermentation: Production and utilization of volatile fatty acid from different wastes- A review

Volatile fatty acids (VFAs) are the building blocks of the chemical industry, and they are the primary contributors to the planet's organic carbon cycle. VFA production from fossil fuels (mostly petroleum) is unsustainable, pollutes the environment, and generates greenhouse gases. As a result of these issues, there is a pressing need to develop alternate sources for the long-term generation of VFAs via anaerobic digestion. The accessible feedstocks for its sustainable production, as well as the influencing parameters, are discussed in this review. The use of VFAs as a raw material to make a variety of consumer products is reviewed in order to find a solution. It also bridges the gap between traditional and advanced VFA production and utilization methods from a variety of solid and liquid waste sources for economical stability.

Significance of different mixing conditions on performance and microbial communities in anaerobic digester amended with granular and powdered activated carbon

Conductive materials amendment in anaerobic digestion (AD) is a promising strategy for boosting the methanogenesis process. Despite mixing is a critical parameter, the behavior of digesters amended with conductive additives upon different mixing conditions has rarely been investigated. This study investigated continuous mixing, intermittent mixing (10 min in every 12 h), and non-mixing conditions for digesters amended with granular activated carbon (GAC) and powdered activated carbon (PAC). The non-mixed GAC digester provided the highest methane yield (318 ± 28 mL/g COD) from synthetic blackwater, while intermittently mixed GAC and control exhibited similar methane yields (290-294 mL/g COD). For non-mixed systems, microbial richness and diversity increased with GAC and PAC amendment. In contrast, continuous and intermittent mixing increased microbial diversity and richness in control reactors while reduced the same in GAC and PAC amended reactors. Overall, various mixing conditions distinctly changed the degree of enrichment/retention of microbes and consequently influenced methane recovery.

A review of recent advances in electrode materials for emerging bioelectrochemical systems: From biofilm-bearing anodes to specialized cathodes

Bioelectrochemical systems (BES), mainly microbial fuel cells (MEC) and microbial electrolysis cells (MFC), are unique biosystems that use electroactive bacteria (EAB) to produce electrons in the form of electric energy for different applications. BES have attracted increasing attention as a sustainable, low-cost, and neutral-carbon option for energy production, wastewater treatment, and biosynthesis. Complex interactions between EAB and the electrode materials play a crucial role in system performance and scalability. The electron transfer processes from the EAB to the anode surface or from the cathode surface to the EAB have been the object of numerous investigations in BES, and the development of new materials to maximize energy production and overall performance has been a hot topic in the last years. The present review paper discusses the advances on innovative electrode materials for emerging BES, which include MEC coupled to anaerobic digestion (MEC-AD), Microbial Desalination Cells (MDC), plant-MFC (P-MFC), constructed wetlands-MFC (CW-MFC), and microbial electro-Fenton (BEF). Detailed insights on innovative electrode modification strategies to improve the electrode transfer kinetics on each emerging BES are provided. The effect of materials on microbial population is also discussed in this review. Furthermore, the challenges and opportunities for materials scientists and engineers working in BES are presented at the end of this work aiming at scaling up and industrialization of such versatile systems.

Damage of anodic biofilms by high salinity deteriorates PAHs degradation in single-chamber microbial electrolysis cell reactor

The anaerobic biodegradation of polycyclic aromatic hydrocarbons (PAHs) in high salinity wastewater is rather hard due to the inhibition of microorganisms by complex and high dosage of salts. Microbial electrolysis cell (MEC), with its excellent characteristic of anodic biofilms, can be an effective way to enhance the PAHs biodegradation. This work evaluated the impact of NaCl concentrations (0 g/L, 10 g/L, 30 g/L, and 60 g/L) on naphthalene biodegradation and analyzed the damage protection mechanism of anodic biofilms in batching MECs. Compared with the open circuit, the degradation efficiency of naphthalene under the closed circuit with 10 g/L NaCl concentration reached the maximum of 95.17% within 5 days. Even when NaCl concentration reached 60 g/L, the degradation efficiency only decreased by 10.02%, compared with the MEC without additional NaCl. Confocal scanning laser microscope (CSLM) proved the superiority of the biofilm states of MEC anode under high salinity in terms of thicker biofilms and higher proportion of live/dead bacteria cells. The highest dehydrogenase activity (DHA) was found in the MEC with 10 g/L NaCl concentration. Moreover, microbial diversity analysis demonstrated the classical electroactive microorganisms Geobacter and Pseudomonas were found on the anodic biofilms of MECs, which have both PAHs degradability and the electrochemical activity. Therefore, this study proved that high salinity had adverse effects on the anodic biofilms, but MEC alleviated the damage caused by high salinity.

High-rate blackwater anaerobic digestion under septic tank conditions with the amendment of biosolids-derived biochar synthesized at different temperatures

Septic tanks have been widely used for blackwater treatment in developing countries, while high-rate septic tanks with improved methane recovery are yet to be achieved. This study investigated biosolids-derived biochar (synthesized at 300℃, 425℃, and 550℃) as an additive for developing high-rate septic tanks. The experiments were conducted with anaerobic bioreactors operated with synthetic blackwater under septic tank conditions. All biochar amended reactors demonstrated a steady increase in daily methane production for increasing OLR from 0.08 to 3 g COD/L/d. The control reactor showed significant process disturbances at OLRs ≥ 2 g COD/L/d with an accumulation of volatile fatty acids followed by pH drop. At OLR of 3 g COD/L/d, the daily methane production from biochar amended reactors was ~ 4.3 times higher than the control (300 vs. 70 mL per day). Biochar addition established a robust microbiome consisted of a higher abundance of hydrogenotrophic and acetoclastic methanogens and hydrogen-producing fermentative bacteria.

Characterization and significance of extracellular polymeric substances, reactive oxygen species, and extracellular electron transfer in methanogenic biocathode

The microbial electrolysis cell assisted anaerobic digestion holds great promises over conventional anaerobic digestion. This article reports an experimental investigation of extracellular polymeric substances (EPS), reactive oxygen species (ROS), and the expression of genes associated with extracellular electron transfer (EET) in methanogenic biocathodes. The MEC-AD systems were examined using two cathode materials: carbon fibers and stainless-steel mesh. A higher abundance of hydrogenotrophic Methanobacterium sp. and homoacetogenic Acetobacterium sp. appeared to play a major role in superior methanogenesis from stainless steel biocathode than carbon fibers. Moreover, the higher secretion of EPS accompanied by the lower ROS level in stainless steel biocathode indicated that higher EPS perhaps protected cells from harsh metabolic conditions (possibly unfavorable local pH) induced by faster catalysis of hydrogen evolution reaction. In contrast, EET-associated gene expression patterns were comparable in both biocathodes. Thus, these results indicated hydrogenotrophic methanogenesis is the key mechanism, while cathodic EET has a trivial role in distinguishing performances between two cathode electrodes. These results provide new insights into the efficient methanogenic biocathode development.

A comparative review on clean hydrogen production from wastewaters

This paper provides a unique review of hydrogen production methods with wastewater treatment to depict a clean and sustainable approach. Various methods for hydrogen production from wastewaters are identified and discussed with recent details by discussing the critical challenges, opportunities, and future directions. Five main performance sectors are considered in detail for each hydrogen production method of the recent case studies, including economic, environmental, social, technical, and reliability. Eight hydrogen production methods are reviewed, including anaerobic method, photo fermentation, dark fermentation, electrolysis, electrodialysis, photocatalysis, photoelectrochemical methods, and super water gasification. A comparative assessment of six reviewed methods for hydrogen production, including environmental, economic, energetic, and exergetic impacts, is evaluated. The comparative assessment results indicate that dark fermentation technology is the most economical method, and it is followed by microbial electrolysis and photofermentation. The most environmentally friendly method for the lowest global warming potential (GWP) is the microbial electrolysis method, and it is followed by photocatalysis and photoelectrochemical methods. Furthermore, the highest energy and exergy efficiencies have been recorded for the microbial electrolysis to be 68% and 64.7%, respectively.

An intermittent power supply scheme to minimize electrical energy input in a microbial electrolysis cell assisted anaerobic digester

From the perspective of energy saving in the operation of microbial electrolysis cell assisted anaerobic digester (MEC-AD), this study focused on developing an intermittent power supply scheme. The applied potential was switched off for 12 and 6 hours/day during the operation of a laboratory-scale MEC-AD system fed with glucose. The results from the operation under continuous applied potential served as the control. The overall biomethane generation and net energy income from the process were unaffected when the applied potential turned off for 6 hours/day. Both quantitative and qualitative analyses of microbial communities suggested that a balanced microbiome could be maintained under short-term switching-off the applied potential. However, performance substantially deteriorated when the applied potential turned off for 12 hours/day. Overall, the results of this study suggest that MEC-AD operation does not need a continuous power supply, and higher energy efficiency can be effectively achieved by intermittently powering the reactor.

Development and application of aerobic, chemically defined media for Dysgonomonas

Members of Dysgonomonas are Gram-stain-negative, non-motile, facultatively anaerobic coccobacilli originally described in relation to their isolation from stool and wounds of human patients (CDC group DF-3). More recently, Dysgonomonas have been found to be widely distributed in terrestrial environments and are particularly enriched in insect systems. Their prevalence in xylophagous insects such as termites and wood-feeding cockroaches, as well as in soil-fed microbial fuel cells, elicit interest in lignocellulose degradation and biofuel production, respectively. Their occurrence in mosquito and fruit fly have implications relating to symbiosis, host immunology and developmental biology. Additionally, their presence in termite, mosquito and nematode present novel opportunities for pest and vector control. Currently, the absolute growth requirements of Dysgonomonas are unknown, and they are commonly cultured under anaerobic conditions on complex media containing blood, peptones, tryptones, and yeast, plant or meat extracts. Restrictive and undefined culturing conditions preclude physiological and genetic studies, and thus further understanding of their metabolic potential. Here we describe the requirements for growth of termite-derived Dysgonomonas isolates and create parallel complex, defined and minimal media that permit vigorous and reliable aerobic growth. Furthermore, we show that these media can be used to easily enrich for Dysgonomonas isolates from densely-colonized and microbially-diverse environmental samples.

Changes in syntrophic microbial communities, EPS matrix, and gene-expression patterns in biofilm anode in response to silver nanoparticles exposure

Understanding the toxic effect of silver nanoparticles (AgNPs) on various biological wastewater treatment systems is of significant interest to researchers. In recent years, microbial electrochemical technologies have opened up new opportunities for bioenergy and chemicals production from organic wastewater. However, the effects of AgNPs on microbial electrochemical systems are yet to be understood fully. Notably, no studies have investigated the impact of AgNPs on a microbial electrochemical system fed with a complex fermentable substrate. Here, we investigated the impact of AgNPs (50 mg/L) exposure to a biofilm anode in a microbial electrolysis cell (MEC) fed with glucose. The volumetric current density was 29 ± 2.0 A/m³ before the AgNPs exposure, which decreased to 20 ± 2.2 A/m³ after AgNPs exposure. The biofilms produced more extracellular polymeric substances (EPS) to cope with the AgNPs exposure, while carbohydrate to protein ratio in EPS considerably increased from 0.4 to 0.7. Scanning electron microscope (SEM) imaging also confirmed the marked excretion of EPS, forming a thick layer covering the anode biofilms after AgNPs injection. Transmission electron microscope (TEM) imaging showed that AgNPs still penetrated some microbial cells, which could explain the deterioration of MEC performance after AgNPs exposure. The relative expression level of the quorum signalling gene (LuxR) increased by 30%. Microbial community analyses suggested that various fermentative bacterial species (e.g., Bacteroides, Synergistaceae_vadinCA02, Dysgonomonas, etc.) were susceptible to AgNPs toxicity, which led to the disruption of their syntrophic partnership with electroactive bacteria. The abundance of some specific electroactive bacteria (e.g., Geobacter species) also decreased. Moreover, decreased relative expressions of various extracellular electron transfer associated genes (omcB, omcC, omcE, omcZ, omcS, and pilA) were observed. However, the members of family Enterobacteriaceae, known to perform a dual function of fermentation and anodic respiration, became dominant after biofilm anode exposed to AgNPs. Thus, EPS extraction provided partial protection against AgNPs exposure.

Degradation of 2-mercaptobenzothizaole in microbial electrolysis cells: Intermediates, toxicity, and microbial communities

The compound 2-mercaptobenzothizaole (MBT) has been frequently detected in wastewater and surface water and is a potential threat to both aquatic organisms and human health (its mutagenic potential has been demonstrated). This study investigated the degradation routes of MBT in the anode of a microbial electrolysis cell (MEC) and the involved microbial communities. The results indicated that graphene-modified anodes promoted the presence of more enriched, developed, and specific communities compared to bare anodes. Moreover, consecutive additions of the OH substituent to the benzene ring of MBT were only detected in the reactor equipped with the graphene-treated electrode. Both phenomena, together with the application of an external voltage, may be related to the larger reduction of biotoxicity observed in the MEC equipped with graphene-modified anodes (46.2 eqtox∙m^-3 to 27.9 eqtox∙m^-3).

Electrodes bioaugmentation promotes the removal of antibiotics from concentrated sludge in microbial electrolysis cells

Microbial electrolysis cells (MECs) had a potential to improve antibiotics removal from wastewater. However, research on antibiotics removal from concentrated sludge using MECs is still very limited. In this study, antibiotics removal and microbial responses in MECs treating concentrated sludge under different applied voltages (0.3 V-1.5 V) were investigated. Results showed that antibiotics removal efficiencies at 0.6 V and 1.0 V were 16.7%-26.6% higher than other applied voltages. The applied voltages had no obvious effects on the viability, activity and composition of microorganisms in the suspended sludge even up to 1.5 V. Bioelectrodes exhibited higher bioelectrocatalytic activity and denser microbial aggregation at 0.6 V and 1.0 V, under which higher antibiotics removal was also achieved. The enhanced removal of antibiotics at the optimal applied voltages was mainly contributed by the bioaugmentation of electrodes, but was irrelative with the electrochemical reaction and the microbial responses in suspended sludge.