An advanced sol-gel strategy for enhancing interfacial reactivity of iron oxide nanoparticles on rosin biochar substrate to remove Cr(VI)

Effect of different production methods on physicochemical properties and adsorption capacities of biochar from sewage sludge and kitchen waste: Mechanism and correlation analysis

Different pyrolysis methods, parameters and feedstocks result in biochars with different properties, structures and removal capacities for heavy metals. However, the role of each property on adsorption capacity and corresponding causal relationships remain unclear. Here, we investigated various physicochemical properties of biochar produced via three different methods and two different feedstocks to clarify influences of biomass sources and pyrolysis processes on biochar properties and its heavy metal adsorption performance. Experimental results showed biochars were more aromatic and contained more functional groups after hydrothermal carbonization, while they had developed pores and higher surface areas produced by anaerobic pyrolysis. The inclusion of oxygen resulted in more complete carbonization and higher CEC biochar. Different biochar properties resulted in different adsorption capacities. Biochar produced by aerobic calcination showed higher adsorption efficiency for Cu and Pb. Correlation analysis proved that pH, cation exchange capacity and degree of carbonization positively affected adsorption, while organic matter content and aromaticity were unfavorable for adsorption. Microstructure and components determined biochar macroscopic properties and ultimate adsorption efficiency for metal ions. This study identifies the degree of correlation and pathways of each property on adsorption, which provides guidance for targeted modification of biochar to enhance its performance in heavy metal removal.

Hydrophilic Copolymers with Hydroxamic Acid Groups as a Protective Biocompatible Coating of Maghemite Nanoparticles: Synthesis, Physico-Chemical Characterization and MRI Biodistribution Study

Superparamagnetic iron oxide nanoparticles (SPION) with a "non-fouling" surface represent a versatile group of biocompatible nanomaterials valuable for medical diagnostics, including oncology. In our study we present a synthesis of novel maghemite (γ-Fe₂O₃) nanoparticles with positive and negative overall surface charge and their coating by copolymer P(HPMA-co-HAO) prepared by RAFT (reversible addition-fragmentation chain-transfer) copolymerization of N-(2-hydroxypropyl)methacrylamide (HPMA) with N-[2-(hydroxyamino)-2-oxo-ethyl]-2-methyl-prop-2-enamide (HAO). Coating was realized via hydroxamic acid groups of the HAO comonomer units with a strong affinity to maghemite. Dynamic light scattering (DLS) demonstrated high colloidal stability of the coated particles in a wide pH range, high ionic strength, and the presence of phosphate buffer (PBS) and serum albumin (BSE). Transmission electron microscopy (TEM) images show a narrow size distribution and spheroid shape. Alternative coatings were prepared by copolymerization of HPMA with methyl 2-(2-methylprop-2-enoylamino)acetate (MMA) and further post-polymerization modification with hydroxamic acid groups, carboxylic acid and primary-amino functionalities. Nevertheless, their colloidal stability was worse in comparison with P(HPMA-co-HAO). Additionally, P(HPMA-co-HAO)-coated nanoparticles were subjected to a bio-distribution study in mice. They were cleared from the blood stream by the liver relatively slowly, and their half-life in the liver depended on their charge; nevertheless, both cationic and anionic particles revealed a much shorter metabolic clearance rate than that of commercially available ferucarbotran.

The Adsorption Potential of Cr from Water by ZnO Nanoparticles Synthesized by Azolla pinnata

Aqueous solutions containing toxic elements (TEs) (such as hexavalent chromium (Cr (VI)) can be toxic to humans even at trace levels. Thus, removing TEs from the aqueous environment is essential for the protection of biodiversity, hydrosphere ecosystems, and humans. For plant fabrication of zinc oxide nanoparticles (PF-ZnONPs), Azolla pinnata plants were used, and X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), SEM, and FTIR techniques were used for the identification of PF-ZnONPs and ZnONPs, which were used to remove Cr (VI) from aqueous solution. A number of adsorption parameters were studied, including pH, dose, concentration of metal ions, and contact time. The removal efficiency of PF-ZnONPs for Cr (VI) has been found to be 96% at a time (60 min), 69.02% at pH 4, and 70.43% at a dose (10 mg·L⁻¹). It was found that the pseudo-second-order model best described the adsorption of Cr (VI) onto PF-ZnONPs, indicating a fast initial adsorption via diffusion. The experimental data were also highly consistent with the Langmuir isotherm model calculations.

Formation and mechanisms of nano-metal oxide-biochar composites for pollutants removal: A review

Biochar, a carbon-rich material, has been widely used to adsorb a range of pollutants because of its low cost, large specific surface area (SSA), and high ion exchange capacity. The adsorption capacity of biochar, however, is limited by its small porosity and low content of surface functional groups. Nano-metal oxides have a large SSA and high surface energy but tend to aggregate and passivate because of their fine-grained nature. In combining the positive qualities of both biochar and nano-metal oxides, nano-metal oxide-biochar composites (NMOBCs) have emerged as a group of effective and novel adsorbents. NMOBCs improve the dispersity and stability of nano-metal oxides, rich in adsorption sites and surface functional groups, maximize the adsorption capacity of biochar and nano-metal oxides respectively. Since the adsorption capacity and mechanisms of NMOBCs vary greatly amongst different preparations and application conditions, there is a need for a review of NMOBCs. Herein we firstly summarize the recent methods of preparing NMOBCs, the factors influencing their efficacy in the removal of several pollutants, mechanisms underlying the adsorption of different pollutants, and their potential applications for pollution control. Recommendations and suggestions for future studies on NMOBCs are also proposed.

Nano-FeS incorporated into stable lignin hydrogel: A novel strategy for cadmium removal from soil

Strategies for reducing cadmium (Cd) content in polluted farmland soils are currently limited. A type of composite with nanoparticles incorporated into a hydrogel have been developed to efficiently remove heavy metals from sewage, but their application in soils faces challenges, such as organic hydrogel degradation due to oxygen exposure and slow Cd²⁺ release from soil constituents. To overcome these challenges, a composite with superior stability for long-term application in soil is required. In this study, ferrous sulfide (FeS) nanoparticle@lignin hydrogel composites were developed. The lignin-based hydrogels inherited lignin's natural mechanical and environmental stability and the FeS nanoparticles efficiently adsorbed Cd²⁺ and enhanced Cd²⁺ desorption from soils by producing H⁺. The high sorption capacity (833.3 g kg^-1) of the composite was attributed to four proposed mechanisms, including cadmium sulfide (CdS) precipitation via chemical reaction (84.06%), lignin complexation (13.19%), hydrogel swelling (0.61%), and nanoparticle sorption (2.15%). In addition, Fe²⁺ displaced from the composite was gradually oxidized to form solid iron oxide hydroxide, which increased Cd²⁺ sorption. The composite significantly reduced the total, surfactant-soluble, and fixed Cd in heavily and lightly polluted paddy soils by 22.4-49.6%, 13.5-68.6%, and 40.1-16.6%, respectively, in 7 days.

Removal of trace Cr(VI) from aqueous solution by porous activated carbon balls supported by nanoscale zero-valent iron composites

In this study, porous activated carbon balls supported by nanoscale zero-valent iron composites (Fe@PACB-700) were used for the first time for the removal of trace Cr(VI) from aqueous solutions. The Fe@PACB-700 composites were prepared by a facile carbothermal reduction method and then characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS). The results show that nZVI particles have been successfully loaded onto PACBs. Fe@PACB-700 shows an excellent Cr(VI) removal efficiency of 91.2%. The maximum adsorption capacity of Fe@PACB-700 for Cr(VI) is 22.24 mg/g, which is 4.36 times that of PACB. The residual Cr(VI) concentration is below 20 ppb with the use of 0.15 g of Fe@PACB-700, which is much lower than the allowable concentration for Cr(VI) in drinking water (0.05 mg/L). The adsorption of Cr(VI) can be well described by the Langmuir isotherm model and pseudo-second-order kinetic model. Fe@PACB-700 still has a high removal efficiency of 80% after five cycles. Thus, Fe@PACB-700 has a great potential for Cr(VI) removal from aqueous solution. Graphical abstract.

The synergistic effect of ultrasound power and magnetite incorporation on the sorption/desorption behavior of Cr(VI) and As(V) oxoanions in an aqueous system

Though abundant studies have targeted the sorption of Cr(VI) and As(V) anions by organic polymers or magnetic metal oxides, there is no research literature on the sorption characteristics of Cr(VI) and As(V) by thiourea-formaldehyde resin (TF) and its magnetic derivative (MTF). TF resin is a strong chelating agent, which has several practical applications. This paper reports on the removal of Cr(VI) and As(V) oxoanions by TF and MTF sorbents. The sorbents were characterized by Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) spectroscopy, elemental analysis, zetametry, Brunauer-Emmett-Teller (BET) analysis, and differential light scattering (DLS). The synergistic influence of magnetite incorporation and ultrasonic power on sorption kinetics, isotherms, and oxoanion desorption were investigated, including the analysis of the uncertainty in the study results. The relationship between kinetic and equilibrium constants of the two sorbents under normal shaking and ultrasound shaking was analysed. Ultrasound power improved the mass transfer and makes the sorption ultra-fast while magnetite enhanced the sorption capacity. The MTF particles sorbed 4.28 and 1.97 mmol g^-1 of Cr(VI) and As(V), respectively, under optimum conditions. Further, desorption kinetics and efficiency of Cr(VI) and As(V) were estimated using normal shaking and ultrasonic agitation. Ultrasound power reduced the time and the concentration of NaCl required for the stabilization of desorption efficiency.