Comparison of coagulative colloidal microbubbles with monomeric and polymeric inorganic coagulants for tertiary treatment of distillery wastewater

Microbiome recognition of virulence-factor-governed interfacial mechanisms in antibiotic resistance and pathogenicity removal by functionalized microbubbles

The frequent occurrence of epidemics around the world gives rise to increasing concerns of the pollution of pathogens and antibiotic resistant bacteria in water. This study investigated the impacts of virulence factors (VFs) on the removal of antibiotic resistant and pathogenic bacteria from municipal wastewater by ozone-free or ozone-encapsulated Fe(III)-coagulant-modified colloidal microbubbles (O3_free-CCMBs or O3-CCMBs). The highly interface-dependent process was initiated with cell-capture on the microbubble surface where the as-collected cells could be further inactivated with the bubble-released ozone and oxidative species if O3-CCMBs were used. The microbiome sequencing analyses denote that the O3_free-CCMB performance of antibiotic resistant and pathogenic bacteria removal was dependent on the virulence phenotypes related to cell-surface properties or structures. The adhesion-related VFs facilitated the effective attachment between cells and the coagulant-modified bubble-surface, which further enhanced cell inactivation by bubble-released ozone. On the contrary, the motility-related VFs might help cells to escape from the bubble capture by locomotion; however, this could be overcome by O3-CCMB-induced oxidative demolition of the movement structures. Besides, the microbubble performance was also impacted with the cell-membrane structure related to antibiotic resistance (i.e., efflux pumps) and the dissolved organic matter through promoting the surface-capture and decreasing the oxidation efficacy. The ozone-encapsulated microbubbles with surface functionalization are robust and promising tools in hampering antibiotic resistance and pathogenicity dissemination from wastewater to surface water environment; and awareness should be raised for the influence of virulence signatures on its performance.

Enhanced Biodesulfurization with a Microbubble Strategy in an Airlift Bioreactor with Haloalkaliphilic Bacterium Thioalkalivibrio versutus D306

Biodesulfurization under haloalkaline conditions requires limiting oxygen and additional energy in the system to deliver high mixing quality control. This study considers biodesulfurization in an airlift bioreactor with uniform microbubbles generated by a fluidic oscillation aeration system to enhance the biological desulfurization process and its hydrodynamics. Fluidic oscillation aeration in an airlift bioreactor requires minimal energy input for microbubble generation. This aeration system produced 81.87% smaller average microbubble size than the direct aeration system in a bubble column bioreactor. The biodesulfurization phase achieved a yield of 94.94% biological sulfur, 84.91% biological sulfur selectivity, and 5.06% sulfur oxidation performance in the airlift bioreactor with the microbubble strategy. The biodesulfurization conditions of thiosulfate via Thioalkalivibrio versutus D306 are revealed in this study. The biodesulfurization conditions in the airlift bioreactor with the fluidic oscillation aeration system resulted in the complete conversion of thiosulfate with 27.64% less sulfate production and 10.34% more biological sulfur production than in the bubble column bioreactor. Therefore, pleasant hydrodynamics via an airlift bioreactor mechanism with microbubbles is favored for biodesulfurization under haloalkaline conditions.

Insights into capture-inactivation/oxidation of antibiotic resistance bacteria and cell-free antibiotic resistance genes from waters using flexibly-functionalized microbubbles

The spread of antibiotic resistance in the aquatic environment severely threatens the public health and ecological security. This study investigated simultaneously capturing and inactivating/oxidizing the antibiotic resistant bacteria (ARB) and cell-free antibiotic resistance genes (ARGs) in waters by flexibly-functionalized microbubbles. The microbubbles were obtained by surface-modifying the bubbles with coagulant (named as coagulative colloidal gas aphrons, CCGAs) and further encapsulating ozone in the gas core (named as coagulative colloidal ozone aphrons, CCOAs). CCGAs removed 92.4-97.5% of the sulfamethoxazole-resistant bacteria in the presence of dissolved organic matter (DOM), and the log reduction of cell-free ARGs (particularly, those encoded in plasmid) reached 1.86-3.30. The ozone release from CCOAs led to efficient in-situ oxidation: 91.2% of ARB were membrane-damaged and inactivated. In the municipal wastewater matrix, the removal of ARB increased whilst that of cell-free ARGs decreased by CCGAs with the DOM content increasing. The ozone encapsulation into CCGAs reinforced the bubble performance. The predominant capture mechanism should be electrostatic attraction between bubbles and ARB (or cell-free ARGs), and DOM enhanced the sweeping and bridging effect. The functionalized microbubble technology can be a promising and effective barrier for ARB and cell-free ARGs with shortened retention time, lessened chemical doses and simplified treatment unit.

Research Progress on Typical Quaternary Ammonium Salt Polymers

Quaternary ammonium salt polymers, a kind of polyelectrolyte with a quaternary ammonium group, are widely used in traditional and emerging industries due to their good water-solubility, adjustable cationicity and molecular weight, high efficiency and nontoxicity. In this paper, firstly, the properties and several synthesis methods of typical quaternary ammonium salt monomers were introduced. Secondly, the research progress on the synthesis of polymers was summarized from the perspective of obtaining products with high molecular weight, narrow molecular weight distribution and high monomer conversion, and special functional polymers. Thirdly, the relationships between the structures and properties of the polymer were analyzed from the perspectives of molecular weight, charge density, structural stability, and microstructural regulation of the polymer chain unit. Fourthly, typical examples of quaternary ammonium salt polymers in the application fields of water treatment, daily chemicals, petroleum exploitation, papermaking, and textile printing and dyeing were listed. Finally, constructive suggestions were put forward on developing quaternary ammonium salt polymers with high molecular weights, strengthening the research on the relationships between the structures and their properties and pinpointing relevant application fields.

Impacts of aluminum- and iron-based coagulants on municipal sludge anaerobic digestibility, dewaterability, and odor emission

Although aluminum- and iron-based chemicals have been broadly used as the two most common types of coagulants for wastewater treatment, their impacts on the performance of downstream sludge management can be quite different and have not been well understood. This work reviewed and analyzed their similarities and differences in the context of the anaerobic digestion performance, dewaterability of digested sludge, and odor emission from dewatered biosolids. In short, iron-based coagulants tend to show less negative impact than aluminum-based coagulants. This can be attributed to the reduction of ferric to ferrous ions in the course of anaerobic digestion, which leads to a suite of changes in protein bioavailability, alkalinity and hydrogen sulfide levels, and in turn the sludge dewaterability and odor potential. Whether these observations still hold true in the context of thermally hydrolyzed sludge management remains to be studied. PRACTITIONER POINTS: The impacts of aluminum-/iron-based coagulant addition on municipal sludge anaerobic digestibility, dewaterability, and odor emission are reviewed. Iron-based coagulants show less negative impact on the sludge digestibility than aluminum-based coagulants. Conclusions may aid practitioners in selecting coagulants in practice and better understanding the mechanisms behind the phenomena.

The suitability of titanium salts in coagulation removal of micropollutants and in alleviation of membrane fouling

Coagulation is a conventional method in water treatment. In recent decades, with the rapid development of membrane filtration, the use of coagulation is facing some new challenges. How to minimize the membrane fouling became a leading-edge topic in the study of coagulation. Here, the performances of three types of titanium coagulants were evaluated in terms of both the coagulation removal of toxic micropollutants and the alleviation of membrane fouling. Three oxysalts and two antibiotics were taken as representatives of inorganic and organic micropollutants. As compared with titanium tetrachloride (TiCl₄) and polytitanium chloride (PTC), titanium xerogel (TXC) with a higher polymerization degree showed much better performances in direct coagulation removal of oxysalts and antibiotics and in pre-coagulation for mitigating membrane fouling in both coagulation-sedimentation-ultrafiltration (CSUF) and in-line coagulation-ultrafiltration (CUF) processes. In the CSUF system, the membrane permeate flux with TXC pre-coagulation (89.5%) was much higher than those of TiCl₄ (56.1%) and PTC (57.4%). After a 5 day continuous operation, the transmembrane pressure in the CUF system with TXC coagulation was increased only to 4.9 kPa, while those of PTC and TiCl₄ were 12.2 and 18.5 kPa, respectively. The results here demonstrate that TXC is a promising coagulant for pollutant removal and membrane fouling alleviation, due to the following merits: better floc properties, weaker pH-dependence, and higher resistance to coordination with organic pollutants. The observation shed new lights on the fabrication and application of coagulants in a wide variety of scenarios.

Current trends for distillery wastewater management and its emerging applications for sustainable environment

Ethanol distillation generates a huge volume of unwanted chemical liquid known as distillery wastewater. Distillery wastewater is acidic, dark brown having high biological oxygen demand, chemical oxygen demand, contains various salt contents, and heavy metals. Inadequate and indiscriminate disposal of distillery wastewater deteriorates the quality of the soil, water, and ultimately groundwater. Its direct exposure via food web shows toxic, carcinogenic, and mutagenic effects on aquatic-terrestrial organisms including humans. So, there is an urgent need for its proper management. For this purpose, a group of researchers applied distillery wastewater for fertigation while others focused on its physico-chemical, biological treatment approaches. But until now no cutting-edge technology has been proposed for its effective management. So, it becomes imperative to comprehend its toxicity, treatment methods, and implication for environmental sustainability. This paper reviews the last decade's research data on advanced physico-chemical, biological, and combined (physico-chemical and biological) methods to treat distillery wastewater and its reuse aspects. Finally, it revealed that the combined methods along with the production of value-added products are one of the best options for distillery wastewater management.

Removal of micron-scale microplastic particles from different waters with efficient tool of surface-functionalized microbubbles

Microplastic (MP) contamination in water has garnered significantly global concerns. The MP removal particularly challenges when the particle size decreases to several microns and other contaminants co-exist. This study used the coagulative colloidal gas aphrons (CCGAs) to simultaneously remove the micron-scale MP particles (~5 µm in diameter) and dissolved organic matter (DOM). Carboxyl-modified poly-(methyl methacrylate) (PMMA) and unsurface-coated polystyrene (PS) were chosen as target MPs. Over 94% of PS particles and almost 100% of color were simultaneously removed with lower CCGA consumption than the scenarios with either contaminant in water. The PMMA removal was not as high as the PS removal since the HA polyanions could compete with the negatively-charged PMMA for CCGAs. High salinity reduced the removal of HA by changing its interfacial behaviors without impacting the MP separation. In river water or influent of wastewater treatment plant, the MP particles were almost completely eliminated whereas the DOM (tyrosine-like or tryptophan-like) was partially removed. The fluorescence quenching titration revealed that CCGAs preferably captured the free DOM and the DOM-coated MP particles through complexation interaction. The study denoted that the CCGA system could be a robust tool for efficiently and synergistically removing micron-scale MPs and DOM from different water matrixes.

Lability-specific enrichment of typical engineered metal (oxide) nanoparticles by surface-functionalized microbubbles from waters

Enrichment of metallic engineered nanoparticles (MENPs) from environmental waters is a prerequisite for their removal, reliable analyses, and environmental process interpretations. This work investigated the enrichment of typical MENPs with different degrees of lability using surface-functionalized microbbubles. During the process, the transformation/dissolution characteristics of MENPs were considered, and the impact of surfactant or coagulant dose, pH of MENP suspensions, and water matrix was systematically investigated. Results show that the colloidal gas aphrons (CGAs) were capable of enriching over 90.0% of ionic Ag(I) which ended up as AgBr and Ag₂CO₃ in floats when the pH of suspension was 6.0. The polyaluminum chloride-modified CGAs with positive surface charges were good at capturing the particulate ZnO-NPs (~84.8%) but failed to collect the ionic species. It should be noted that the total MENP enrichment efficiency closely related to the content proportions of different species. In the river water, both of the dissolved natural organic matter (fulvic acids) and the electrolytes might influence the enrichment process by affecting the species transformation of Ag-NPs and ZnO-NPs. For the stable TiO₂-NPs, 97.1% of the nanoparticles were captured by CGAs. FAs apparently reinforced the enrichment performance since the molecules acted as bridge and facilitated the attachment between TiO₂-NP and CGAs. This work contributes to establishing the robust microbubble-induced enrichment method considering the characteristics of MENP contaminants.