Solid base Mg-doped ZnO for heterogeneous catalytic ozonation of isoniazid: Performance and mechanism

Hydrothermally improved natural manganese-containing catalytic materials to degrade 4-chlorophenol

Natural manganese-containing mineral (NMM) was used as a catalyst in heterogeneous catalytic ozonation for 4-chlorophenol (4-CP) degradation. The surface and structural properties of NMM were modified by the hydrothermal aging process and called H-NMM. The catalytic activity of NMM and H-NMM were evaluated for the catalytic ozonation process (COP). The synergistic effect of NMM and H-NMM in ozonation processes for 4-CP degradation under optimal conditions (pH of 7, 1 g/L of NMM and H-NMM, 0.85 mg/min of O₃, and 15 min of reaction time) was measured by 3.04 and 4.34, respectively. During the hydrothermal process, Mn⁴⁺ and Fe²⁺ were converted to Mn²⁺ and Fe³⁺, which caused better performance of the H-NMM than the NMM. During the catalytic ozonation process, Mn²⁺ is completely oxidized, which increases the production of Hydroxyl radical (•OH). The reactive oxygen species (ROS) generated in the system were identified using radical scavenging experiments. •OH, superoxide radical (•O₂^-), and singlet oxygen (¹O₂) represented the dominant reactive species for 4-CP degradation. The O₃/H-NMM process indicated a powerful ability in the mineralization of 4-CP (66.31% of TOC degradation). H-NMM exhibited excellent stability and reusability in consecutive catalytic cycles, and the NMM exhibited desirable performance. This study offers NMM and H-NMM as effective, stable, and competitive catalysts for hastening and enhancing the ozonation process to mitigate environmentally related pollutants of high concern.

Facilitated catalytic ozonation of atrazine over highly stabilized Zn-Al layered double oxides composites: efficacy and mechanism

A series of Zn-Al Layered Double Oxides (ZnAl-LDO) composites were prepared by the hydrothermal and calcination method via employing the Zn-Al Layered Double Hydroxide (ZnAl-LDH) as the precursors in the present study. The structural properties and the catalytic ozonation activity of Zn_rAl-T composites synthesized with different Zn/Al molar ratios and calcination temperatures were systematically investigated. Diversified characterizations were applied to analyze the phase structure and chemical composition of Zn_rAl-T composites. As the calcination temperature increased, the layered ZnAl-LDH structure could be entirely destroyed and the crystallinity gradually improved. With the Zn/Al mole ratio of 4.0 and calcination temperature of 500°C, the Zn4Al-500 composite obtained the outstanding catalytic ozonation performance for atrazine (ATZ) degradation with the pseudo-first-order constant of 0.5080 min^-1, which was 5 times more than that in O₃ alone. Meanwhile, the ATZ degradation efficiency was gradually enhanced from 44.1% to 99.9% within 3.0 min when the solution pH ranged from 3.0 to 10.0. Besides, the Zn₄Al-500 composite exhibited splendid stability over multiple reaction cycles. In addition, the radical scavenging test and electron spin resonance measurement demonstrated that superoxide radical and hydroxyl radical are the dominant reactive species in O₃/Zn₄Al-500 process. Moreover, nineteen and ten transformation products were detected in O₃ alone and O₃/Zn₄Al-500 process, and possible degradation pathways of ATZ were further elucidated. Overall, the Zn₄Al-500 composite would provide a potential alternative for pollutants removal due to its high catalytic ozonation efficiency, stability, and reusability.

A comprehensive review on metal based active sites and their interaction with O3 during heterogeneous catalytic ozonation process: Types, regulation and authentication

Heterogeneous catalytic ozonation (HCO) was a promising water purification technology. Designing novel metal-based catalysts and exploring their structural-activity relationship continued to be a hot topic in HCO. Herein, we reviewed the recent development of metal-based catalysts (including monometallic and polymetallic catalysts) in HCO. Regulation of metal based active sites (surface hydroxyl groups, Lewis acid sites, metal redox cycle and surface defect) and their key roles in activating O₃ were explored. Advantage and disadvantage of conventional characterization techniques on monitoring metal active sites were claimed. In situ electrochemical characterization and DFT simulation were recommended as supplement to reveal the metal active species. Though the ambiguous interfacial behaviors of O₃ at these active sites, the existence of interfacial electron migration was beyond doubt. The reported metal-based catalysts mainly served as electron donator for O₃, which resulted in the accumulation of oxidized metal and reduced their activity. Design of polymetallic catalysts could accelerate the interfacial electron migration, but they still faced with the dilemma of sluggish Me^(n+m)+/Meⁿ⁺ redox cycle. Alternative strategies like coupling active metal species with mesoporous silicon materials, regulating surface hydrophobic/hydrophilic properties, polaring surface electron distribution, coupling HCO process with photocatalysis and H₂O₂ were proposed for future research.

State of Art and Perspectives in Catalytic Ozonation for Removal of Organic Pollutants in Water: Influence of Process and Operational Parameters

The number of organic pollutants detected in water and wastewater is continuously increasing thus causing additional concerns about their impact on public and environmental health. Therefore, catalytic processes have gained interest as they can produce radicals able to degrade recalcitrant micropollutants. Specifically, catalytic ozonation has received considerable attention due to its ability to achieve advanced treatment performances at reduced ozone doses. This study surveys and summarizes the application of catalytic ozonation in water and wastewater treatment, paying attention to both homogeneous and heterogeneous catalysts. This review integrates bibliometric analysis using VOS viewer with systematic paper reviews, to obtain detailed summary tables where process and operational parameters relevant to catalytic ozonation are reported. New insights emerging from heterogeneous and homogenous catalytic ozonation applied to water and wastewater treatment for the removal of organic pollutants in water have emerged and are discussed in this paper. Finally, the activities of a variety of heterogeneous catalysts have been assessed using their chemical–physical parameters such as point of zero charge (PZC), pKa, and pH, which can determine the effect of the catalysts (positive or negative) on catalytic ozonation processes.

Highly efficient catalytic ozonation for ammonium in water upon γ-Al2O3@Fe/Mg with acidic-basic sites and oxygen vacancies

Catalytic ozonation has prospects in the advanced treatment of nitrogen removal, and solid base MgO can efficiently catalyze the ozonation of ammonium nitrogen. However, it is necessary to improve the problem of easy loss, difficult recovery, and low percentage of gaseous products. Here, MgO, amorphous Fe₂O₃, and γ-Al₂O₃ were selected as doping components and supports, respectively, to prepare γ-Al₂O₃@Fe/Mg composite catalysts with abundant acidic-basic sites and oxygen vacancies. The results show that γ-Al₂O₃@Fe/Mg₅ can efficiently catalyze the ozonation of ammonium nitrogen (98.73%) with 67.82% gaseous product selectivity under the conditions of initial pH = 7, catalyst dosage of 112.88 g/L, and ozone dosage of 2.4 mg/min. The doping of Fe₂O₃ and MgO with a weaker lattice oxygen binding energy improves the gaseous product selectivity. The mechanism of ammonium nitrogen removal for γ-Al₂O₃@Fe/Mg₅ is revealed, especially the intrinsic contribution of acidic-basic sites and oxygen vacancies. The pH and active sites play different roles in ozone decomposition for NH₄⁺ removal. Surface hydroxyl protonation on basic sites and oxygen vacancies and electron transfer on acidic sites are responsible for ozone decomposition to hydroxyl radicals. Moreover, γ-Al₂O₃@Fe/Mg₅ exhibits good stability, few leaching ions, and can be settled in water for easy recovery. This study suggests that γ-Al₂O₃@Fe/Mg₅ is a good candidate for the catalytic ozonation of ammonium nitrogen.

Fluidized ZnO@BCFPs Particle Electrodes for Efficient Degradation and Detoxification of Metronidazole in 3D Electro-Peroxone Process

A novel material of self-shaped ZnO-embedded biomass carbon foam pellets (ZnO@BCFPs) was successfully synthesized and used as fluidized particle electrodes in three-dimensional (3D) electro-peroxone systems for metronidazole degradation. Compared with 3D and 2D + O₃ systems, the energy consumption was greatly reduced and the removal efficiencies of metronidazole were improved in the 3D + O₃ system. The degradation rate constants increased from 0.0369 min^-1 and 0.0337 min^-1 to 0.0553 min^-1, respectively. The removal efficiencies of metronidazole and total organic carbon reached 100% and 50.5% within 60 min under optimal conditions. It indicated that adding ZnO@BCFPs particle electrodes was beneficial to simultaneous adsorption and degradation of metronidazole due to improving mass transfer of metronidazole and forming numerous tiny electrolytic cells. In addition, the process of metronidazole degradation in 3D electro-peroxone systems involved hydroxyethyl cleavage, hydroxylation, nitro-reduction, N-denitrification and ring-opening. The active species of ·OH and ·O₂^- played an important role. Furthermore, the acute toxicity LD₅₀ and the bioconcentration factor of intermediate products decreased with the increasing reaction time.

Low-Temperature O3 Decomposition over Pd-TiO2 Hybrid Catalysts

In aircraft and spacecraft, outside air is not directly fed to the passenger because it contains ozone at elevated altitudes. The decomposition of low concentration ozone in the air was carried out at 25 °C by catalytic oxidation on Pd-based catalysts supported on a high surface area hybrid TiO2. The use of these hybrid catalysts has shown a beneficial effect, both on the catalytic activity and on the catalyst stability. Kinetic studies showed that the most promising catalytic phase (Pd/TiO2_100) was the one obtained from the TiO2 support containing the lowest content of citrate ligands and leading to small Pd particles (around 4 nm). The effect of catalyst synthesis on the decomposition of O3 gas (15 ppm) in a dry and humid (HR = 10%) stream in a closed environment such as aircraft or spacecraft was also investigated in this study and further elucidated by detailed characterizations. It was shown that the system could be used as an effective treatment for air coming from outside.

Advanced catalytic ozonation for degradation of pharmaceutical pollutants-A review

Various chemical treatment techniques are involved in removing refractory organic compounds from water and wastewater using the oxidation reaction of hydroxyl radicals (^•OH). The use of catalysts in advanced catalytic ozonation is likely to improve the decomposition of molecular ozone to generate highly active free radicals that facilitate the rapid and efficient mineralization and degradation of numerous organics. For the degradation of toxic organic pollutants in wastewater, the advanced catalytic ozonation process has been widely applied in recent years. Low utilization efficiency of ozone and ineffective mineralization of organic contaminants by ozone can be remedied with advanced catalytic ozonation. Advanced catalytic ozonation has gained popularity because of these merits. However, homogeneous catalytic ozonation has the disadvantage of producing secondary contaminants from the addition of metallic ions. Heterogeneous catalytic ozonation can overcome this drawback by utilizing metals, metallic oxides, and carbon materials as a catalyst of efficacy and stability. This review discusses various aspects of catalytic ozonation in wastewater treatment of pharmaceutical pollutants, application of catalytic ozonation process in typical wastewater, and prospects in advancing the techniques in heterogeneous catalytic ozonation.

Magnetic cotton textile wastes pyrolyzed by ferric cerium oxide for degradation of p-nitrophenol by catalytic ozonation

In this paper, magnetic cotton textile wastes pyrolyzed by ferric cerium oxide (Fe_xCe_y oxide/PC) were synthesized for degradation of p-nitrophenol by catalytic ozonation, and the optimal Fe-Ce ratio was 10:1. Compared to Fe₁₀Ce₁ oxide, the Fe₁₀Ce₁ oxide/PC not only greatly improved the degradation efficiency of PNP, but also reduced the dosage of catalyst. Through the BET test, the Fe₁₀Ce₁ oxide/PC has a high specific surface area to absorb part of the pollutants. VSM test shows that the material is magnetic and easy to recycle. Response surface methodology (RSM) was applied to optimize the experimental condition, and the optimal removal rate was 90% when the initial pH was 9, the catalyst dosage was 0.4 g/L, and the ozone addition was 1.77 L/min (5.9 mg/L). Finally, the mechanism of PNP degradation was explored utilizing inhibitor and ESR free radical detection. The adsorption capacity of the material and electron-absorbing property of PNP jointly determined the high catalytic efficiency with Fe₁₀Ce₁ oxide/PC in catalytic ozonation.

Regeneration of [Bmim]BF4 ionic liquid by ozonation: hydrogen bond roles, synergistic effect, and DFT calculation

Ionic liquids (ILs) are a kind of promising extractants for removing undesirable organics from industrial wastewater and crude oil, etc. Herein, IL regeneration by ozonation was proposed for its recycling. 1-Butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄) and phenol were used as the representative IL and organic matter, respectively. The regeneration performance, stability of [Bmim]BF₄, and roles of hydrogen bonds between O₃ and [Bmim]BF₄ in the phenol removal were studied. The experimental results showed that 90.2% of phenol was degraded in [Bmim]BF₄ after ozonation treatment for 30 min with the O₃ concentration of 1.2 mg/L. The nonvolatility of [Bmim]BF₄-made phenol was adequately degraded, while the concentration of phenol increased during ozone treatment in the conventional extractants (ethanol, ethyl acetate, and dichloromethane) due to their high volatility. The reuse experiments, spectra of Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy indicated that [Bmim]BF₄ was steady under the ozonation process. Density functional theory simulation confirmed that hydrogen bonds between [Bmim]⁺ and O₃ could be formed, and calculational results of Hirshfeld charges indicated that the nucleophilicity of O₃ was enhanced by the hydrogen bonds. The enhanced nucleophilicity resulted in the increase of phenol degradation efficiency by ozonation, and the synergistic effect between O₃ and ILs was proportional to the hydrogen bond donor ability of ILs.

Ternary catalyst Mn-Fe-Ce/Al2O3 for the ozonation of phenol pollutant: performance and mechanism

In this study, a novel ternary catalyst Mn-Fe-Ce/Al2O3 was synthesized by co-impregnation method, and was characterized by XRD, SEM, XPS, and FTIR. The catalytic performance of this ternary catalyst was evaluated in the heterogeneous catalytic ozonation of phenol pollutants and it improved the removal rate and mineralization degree of phenol pollutants. The changes of dissolved ozone in water and the TBA experiment proved that the ternary catalyst could accelerate the decomposition of ozone into hydroxyl radicals, thus accelerating the oxidation of phenol. Phosphate experiments and surface hydroxyl density measurements proved that surface hydroxyl was the active site of the catalyst. XPS analysis showed that the ternary catalysts accelerated electron transfer through the redox cycles of Mn2+-Mn3+-Mn4+, Fe2+-Fe3+, and Ce3+-Ce4+, which also contributed to the high catalytic activity. Moreover, the catalyst maintained high catalytic activity after five cycles of use. Therefore, the ternary catalyst was considered an efficient and promising catalyst for catalytic ozonation system.