Benzotriazoles and benzothiazoles prevail in indoor dust from an E-waste dismantling area in South China: Elevated concentrations and implication for human exposure

Identification of hazardous organic compounds in e-waste plastic using non-target and suspect screening approaches

End-of-life electric and electronic devices stand as one of the fastest growing wastes in the world and, therefore, a rapidly escalating global concern. A relevant fraction of these wastes corresponds to polymeric materials containing a plethora of chemical additives. Some of those additives fall within the category of hazardous organic compounds (HOCs). Despite the significant advances in the capabilities of analytical methods, the comprehensive characterization of WEEE plastic remains as a challenge. This research strives to identify the primary additives within WEEE polymers by implementing a non-target and suspect screening approach. Gas chromatography coupled to time-of-flight mass spectrometry (GC-QTOF-MS), using electron ionization (EI), was applied for the detection and identification of more than 300 substances in this matrix. A preliminary comparison was carried out with nominal resolution EI-MS spectra contained in the NIST17 library. BPA, flame retardants, UV-filters, PAHs, and preservatives were among the compounds detected. Fifty-one out of 300 compounds were confirmed by comparison with authentic standards. The study establishes a comprehensive database containing m/z ratios and accurate mass spectra of characteristic compounds, encompassing HOCs. Semi-quantification of the predominant additives was conducted across 48 WEEE samples collected from handling and dismantling facilities in Galicia. ABS plastic demonstrated the highest median concentrations, ranging from 0.154 to 4456 μg g-1, being brominated flame retardants and UV filters, the families presenting the highest concentrations. Internet router devices revealed the highest concentrations, containing a myriad of HOCs, such as tetrabromobisphenol A (TBBPA), tribromophenol (TBrP), triphenylphosphate (TPhP), tinuvin P and bisphenol A (BPA), most of which are restricted in Europe.

Comprehensive Identification and Ubiquitous Occurrence of Eight Classes of Rubber-Derived Vulcanization Accelerators in Urban Dusts

Vulcanization accelerators (VAs) serve as crucial additives in synthetic rubber on a global scale. Despite their widespread use, the environmental presence, distribution, and associated exposure risks of VAs remain poorly understood. This study compiled a target list and conducted a screening for eight classes encompassing 42 VAs in diverse urban dust samples from South China. A total of 40 of the 42 target VAs were detectable across all four studied regions, among which 30 were identified for the first time in the environment. Among the eight structure-classified VA classes, xanthates exhibited the highest concentrations (median: 3810-81,300 ng/g), followed by thiazoles, guanidines, sulfenamides, dithiocarbamates, thiurams, thioureas, and others. The median total concentrations of all target VAs (∑VAs) were determined to be 5060 ng/g in road dust, 5730 ng/g in parking lot dust, 29,200 ng/g in vehicle repair plant dust, and 84,300 ng/g in household dust, indicating the widespread presence of numerous rubber-derived VAs in various urban environments. This study marked the first systematic effort to identify a wide range of emerging rubber-derived VAs prevalent in urban environments. The findings call for increased attention to these widely utilized but less well-evaluated chemicals in future research and environmental management efforts.

Occurrence of high production volume chemicals and polycyclic aromatic hydrocarbons in urban sites close to industrial areas. Human exposure and risk assessment

Evaluating the occurrence of high production volume chemicals (HPVCs) and polycyclic aromatic hydrocarbons (PAHs) in the air is important because they carry a carcinogenic risk and can lead to respiratory or endocrine problems. Examples of HPVCs are organophosphate esters, benzosulfonamides, benzothiazoles, phthalate esters (PAEs), phenolic antioxidants and ultraviolet stabilizers. In this paper we develop a multi-residue method for determining HPVCs and PAHs in air samples via pressurized liquid extraction followed by gas chromatography-mass spectrometry. Air samples were collected by active sampling with high volume samplers using quartz fiber filter for the particulate matter (PM10) and polyurethane foams for gas phase. The compounds found at the highest concentrations were PAEs, with a concentration of up to 24 ng m-3 of DEHP in gas phase and up to 109 ng m-3 of DEHA in PM10. Non-carcinogenic risk assessment results ranged from 9.7E-05 to 9.5E-03 for most of the compounds studied. On the other hand, the results for carcinogenic risk showed that PAHs made the highest contribution.

First Evidence of Hindered Amine Light Stabilizers As Abundant, Ubiquitous, Emerging Pollutants in Dust and Air Particles: A New Concern for Human Health

Hindered amine light stabilizers (HALSs) represent a crucial class of polymer additives that are extensively used in plastics and other polymeric materials. However, their environmental presence and related exposure risks have until now remained unexplored. This study addressed this critical knowledge by examining dust and air particles collected in South China, utilizing a comprehensive analytical approach to identify and quantify nine monomeric HALSs. A total of seven of the nine studied HALSs were detected in the samples, with bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate (Tinuvin 770) and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate (HS-508) identified as the most abundant and widespread pollutants. Median total concentrations of HALSs ranged from 417 to 8,830 ng/g in urban dust samples and from 28.6 to 70.9 pg/m3 in urban air particles. Notably, dust concentrations of HALSs significantly exceeded those of traditional well-known light stabilizers such as UV absorbers. Human exposure assessment indicated that in contrast to air inhalation dust ingestion represented a more substantial exposure pathway owing to the relatively low volatility of these newly identified chemicals. Predictive modeling suggests that many of the examined HALSs exhibited characteristics of persistence, high toxicity, or strong potential for long-range transport, underscoring their hazardous nature. This study represents the first comprehensive investigation into the prevalence of HALSs as a class of emerging pollutants widespread in the environment, necessitating heightened attention and further research in the future.

Bisphenol and analogues in indoor dust from E-waste recycling sites, neighboring residential homes, and urban residential homes: Implications for human exposure

The compound 4-hydroxyphenyl 4-isoprooxyphenylsulfone (BPSIP) has recently emerged as a novel alternative to bisphenol A (BPA) and has been found in various paper products. However, there is limited information available regarding the identification of BPSIP as a novel contaminant in the e-waste dismantling area. In our research, we conducted a comprehensive analysis of 16 bisphenol analogues (BPs), including BPSIP, within indoor dust samples obtained from a representative e-waste recycling facility, neighboring rural communities, and control urban communities. Out of the 16 target BPs, ten were found in both e-waste and local household dust, while only six BPs were identified in the control urban household dust. Bisphenol A (BPA) remained the predominant compound, followed by bisphenol F (BPF), bisphenol S (BPS), BPSIP and bisphenol AF (BPAF). The total concentrations of BPs in e-waste dust were notably higher compared to both local and urban household dust (p < 0.01), with BPA and BPF, in particular, exhibiting significantly elevated levels. Importantly, BPSIP was first identified in e-waste dust, and its concentration significantly exceeded that of the commonly used BPA alternative, BPAF, which justifiably merits increasing concern. Correlation analysis indicated that BPs were commonly used in the production of electronic products, and e-waste dismantling activities contributed significantly to their widespread emission. The daily intakes of BP through dust ingestion for these three population groups exceeded the recently established tolerable daily intake for BPA, especially among e-waste dismantling workers. This represents the first report indicating that e-waste recycling is causing substantial emissions of multiple bisphenol analogues, including a novel contaminant.

HBM4EU e-waste study: Occupational exposure of electronic waste workers to phthalates and DINCH in Europe

Workers involved in the processing of electronic waste (e-waste) are potentially exposed to toxic chemicals, including phthalates and alternative plasticizers (APs). Dismantling and shredding of e-waste may lead to the production of dust that contains these plasticizers. The aim of this study, which was part of the European Human Biomonitoring Initiative (HBM4EU), was to assess the exposure to phthalates (e.g. di-(2-ethylhexyl) phthalate (DEHP), diethyl phthalate (DEP), di-butyl phthalate (DBP), butyl-benzyl phthalate (BBzP), di-isononyl phthalate (DiNP), di-isodecyl phthalate (DiDP) and cyclohexane-1,2-dicarboxylic di-isononyl ester (DINCH) in e-waste workers from ten European companies. This was achieved by (i) analysing urine samples from 106 e-waste workers collected at the beginning and at the end of the work week, (ii) comparing these with urine samples from 63 non-occupationally exposed controls, and (iii) analysing settled floor dust collected in e-waste premises. Significantly higher urinary concentrations of seven out of thirteen phthalates and DINCH metabolites were found in the e-waste workers compared to the control population. However, no significant differences were found between pre- and post-shift concentrations in the e-waste workers. Concentrations of DBP, DEHP and DiDP in dust were weakly to moderately positively correlated with their corresponding urinary metabolite concentrations in the e-waste workers (Spearman's ρ = 0.4, 0.3 and 0.2, respectively). Additionally, significantly lower urinary concentrations of nine phthalates and DINCH metabolites were found in e-waste workers using respiratory protective equipment (RPE) during their work activities, reflecting the potential benefits of RPE to prevent occupational exposure to phthalates and DINCH. The estimated daily intake (EDI) values obtained in this study were lower than the corresponding tolerable daily intake (TDI) adopted by the European Food Safety Authority (EFSA) for the general population, suggesting that the risk for negative health consequences in this population of e-waste workers from exposure to phthalates and DINCH is expected to be low. This was confirmed by the urinary metabolite concentrations of all workers being lower than the HBM4EU guidance values derived for the occupational exposed and general population. This study is one of the first to address the occupational exposure to phthalates and DINCH in Europe in e-waste dismantling workers, combining a human biomonitoring approach with analysis of settled indoor dust.

Selective determination of 2-aminobenzothiazole in environmental water and organic extracts from fish and dust samples

In the present study, a homemade mixed-mode ion-exchange sorbent based on silica with embedded graphene microparticles is applied for the selective extraction of 2-aminobenzothiazole (NH2BT) followed by determination through liquid chromatography coupled to high-resolution mass spectrometry. The sorbent was evaluated for the solid-phase extraction of NH2BT from environmental water samples (river, effluent wastewater, and influent wastewater), and NH2BT was strongly retained through the selective cation-exchange interactions. Therefore, the inclusion of a clean-up step of 7 mL of methanol provided good selectivity for the extraction of NH2BT. The apparent recoveries obtained for environmental water samples ranged from 62 to 69% and the matrix effect from -1 to -14%. The sorbent was also evaluated in the clean-up step of the organic extract for the extraction of NH2BT from organic extracts of indoor dust samples (10 mL of ethyl acetate from pressurized liquid extraction) and fish (10 mL of acetonitrile from QuEChERS extraction). The organic extracts were acidified (adding a 0.1% of formic acid) to promote the cation-exchange interactions between the sorbent and the analyte. The apparent recoveries for fish samples ranged from 22 to 36% depending on the species. In the case of indoor dust samples, the recovery was 41%. It should be highlighted the low matrix effect encountered in such complex samples, with values ranging from -7 to 5% for fish and dust samples. Finally, various samples were analyzed. The concentration in river samples ranged from 31 to 136 ng/L; in effluent wastewater samples, from 55 to 191 ng/L; in influent wastewater samples, from 131 to 549 ng/L; in fish samples, from 14 to 57 ng/g dried weight; and in indoor dust samples, from  Collapse

Key Words

• Clean-up
• Complex water samples
• Dust
• Fish
• Homemade mixed-mode ion-exchange sorbent
• Selective solid-phase extraction

Collapse

MESH Headings

• Animals
• Tandem Mass Spectrometry/methods
• Wastewater
• Water/analysis
• Dust/analysis
• Water Pollutants, Chemical/analysis
• Solid Phase Extraction/methods
• Fishes
• Cations/analysis

Collapse

Grants

• 2020PMF-PIPF-33 Universitat Rovira i Virgili
• PID2020-114587GB-I00 Ministerio de Ciencia e Innovación

Collapse

Affiliation(s)

Alberto Moral Department of Analytical Chemistry and Organic Chemistry, Universitat Rovira i Virgili, Sescelades Campus, Marcel·lí Domingo 1, 43007, Tarragona, Spain
Francesc Borrull Department of Analytical Chemistry and Organic Chemistry, Universitat Rovira i Virgili, Sescelades Campus, Marcel·lí Domingo 1, 43007, Tarragona, Spain
Kenneth G Furton Department of Chemistry and Biochemistry, Florida International University, International Forensic Research Institute, Miami, FL, 33199, USA
Abuzar Kabir Department of Chemistry and Biochemistry, Florida International University, International Forensic Research Institute, Miami, FL, 33199, USA
Núria Fontanals Department of Analytical Chemistry and Organic Chemistry, Universitat Rovira i Virgili, Sescelades Campus, Marcel·lí Domingo 1, 43007, Tarragona, Spain.
Rosa Maria Marcé Department of Analytical Chemistry and Organic Chemistry, Universitat Rovira i Virgili, Sescelades Campus, Marcel·lí Domingo 1, 43007, Tarragona, Spain

Collapse

Organic ultraviolet absorbents in soils and typical plants from an industrial metropolis in China: Concentrations, profiles and environmental implications

There is accumulating evidence of the toxicity of organic ultraviolet absorbers (OUVAs); however, limited information is available regarding the presence of OUVAs in terrestrial environments and organisms. Therefore, this study was conducted to investigate the occurrence of 11 OUVAs in soils and typical plant species from an industrial metropolis in China. Total OUVA concentrations in soils ranged from 1.30 to 80.3 ng g-1 DW. Based on comparison with previously reported data, OUVA contamination in soil was not severe. Benzophenone and octocrylene were the dominant OUVAs in soils, with median contributions to total concentrations of 25% and 15%, respectively. Source assessment revealed that the observed OUVA contamination primarily originated from industrial activities and the use of personal care products. The concentration of 11 OUVAs in plants ranged from 159 to 4470 ng g-1 DW, at high levels. Our findings imply that great attention should be given to the presence of these chemicals in plants because of the risk they could pose as well as the potential for biomagnification as plants are eaten by insects and birds. Our results also indicate the necessity to further study the geochemical behavior of these chemicals in urban ecosystems in order to better manage the harmfulness to terrestrial ecological health caused by their exposure through the food chains.

Extraction of selected benzothiazoles, benzotriazoles and benzenesulfonamides from environmental water samples using a home-made sol-gel silica-based mixed-mode zwitterionic sorbent modified with graphene

A novel sol-gel silica-based mixed-mode zwitterionic sorbent modified with graphene microparticles was synthesized. Thanks to the inclusion of multiple functional groups and graphene microparticles to exert a wide range of intermolecular/interionic interactions including dipole-dipole interactions, ion-exchange interactions and π-π interactions, the sorbent showed high retention in the solid-phase extraction (SPE) of benzothiazoles, benzotriazoles and benzenesulfonamides. The SPE protocol was optimized in terms of pH, sample loading volume and elution conditions using liquid chromatography coupled to high resolution mass spectrometry (LC-HRMS). The method based on SPE followed by LC-HRMS was validated. Apparent recoveries at two levels of concentration were in the range from 48 to 85% (in most cases) in matrices such as influent wastewater, matrix effect was lower than ±30% in most cases, method detection and quantification limits being lower than 20 ng/L and repeatability and reproducibility between days were lower than 18% (n = 4). River, effluent and influent wastewaters samples were analyzed, obtaining concentrations ranging from 3 to 175 ng/L in river samples, from 12 to 499 ng/L in effluent samples and from 15 to 632 ng/L in influent samples, when the compounds were above the method quantification limits.

Prenatal exposure to benzotriazoles and benzothiazoles and child neurodevelopment: A longitudinal study

Benzotriazoles (BTRs) and benzothiazoles (BTHs) are emerging benzo-heterocyclic compounds that may induce neurotoxicity. However, the effect of prenatal exposure to BTs (BTRs and BTHs) on child neurodevelopment has not been elucidated. We aimed to explore the associations between maternal urinary concentrations of BTs in single or in mixture with child neurodevelopment at the age of two. This study recruited 513 mother-child pairs based on a birth cohort from 2014 to 2015 in Wuhan. Maternal urinary concentrations of eight BTs (four BTRs and four BTHs) in the first, second, and third trimesters were measured. The mental development index (MDI) and psychomotor development index (PDI) of children, as two indexes of neurodevelopment, were assessed at two years old by the Bayley Scales. In the analyses of single BTs, prenatal average tolyltriazole (TTR) exposure level was associated with decreased boys' MDI scores (β = -2.84, 95 % CI: -5.11, -0.57) and prenatal average 1-H-benzotriazole (1-H-BTR) exposure level was associated with decreased boys' PDI scores (β = -1.44, 95 % CI: -2.70, -0.17), respectively. Maternal urinary concentrations of benzothiazole (BTH) in the 1^st trimester (β = -1.79, 95 % CI: -2.78, -0.80), 2^nd trimester (β = -1.14, 95 % CI: -2.19, -0.09), and the prenatal average exposure (β = -2.15, 95 % CI: -3.69, -0.61) were also negatively associated with boys' PDI scores. However, no significantly negative association was observed among girls. In the further mixture analysis, the quantile g-computation model found a significant negative association between prenatal average concentrations of BTs in mixture and boys' PDI scores [β = -4.80 (95 % CI: -9.08, -0.52)], and BTH weighted the highest in the negative association. As far as we know, this is the first research to estimate the effect of prenatal exposure to BTs on child neurodevelopment. The findings showed that prenatal exposure to BTs was negatively associated with neurodevelopment among boys, suggesting that the associations may be modified by infant sex.

Multiresidue analytical method for high production volume chemicals in dust samples, occurrence and human exposure assessment

A multiresidue analytical method based on pressurised liquid extraction and gas-chromatography mass spectrometry was developed to determine 22 compounds belonging to different chemical families in indoor dust.: Seven organophosphate esters, six phthalate esters, three benzotriazoles, five benzothiazoles and four benzenesulfonamides were included in the present study, all of them belonging to the category of high production volume chemicals (HPVCs). Apparent recoveries ranged between 45% and 123% and method quantification limits ranged from 0.03 μg/g to 3.8 μg/g. The occurrence of the selected HPVCs was evaluated in indoor dust from different locations in the Tarragona (Catalonia, Spain) region. Two benzenesulfonamides, ortho-toluenesulfonamide and para-toluenesulfonamide, were detected in dust samples for the first time. Phthalate esters and organophosphate esters were the most abundant compounds found, and di-(2-ethylhexyl) phthalate (DEHP) was determined at the highest concentrations. With the data obtained, human exposure was assessed by calculating the estimated daily intakes (EDI) via ingestion and dermal contact. Non-carcinogenic and carcinogenic risk assessments found no risks in any of the scenarios tested, which included two age classes (children and adults) and two possible exposure scenarios (median and worst-case scenario), except for the evaluation of carcinogen risk due to ingestion of DEHP in the worst-case scenario.

Exploring the adsorption behavior of benzotriazoles and benzothiazoles on polyvinyl chloride microplastics in the water environment

As a kind of emerging pollutant, microplastics (MPs) play an important role as a carrier for pollutant migration in the water environment. Carried by the MPs, benzotriazoles, and benzothiazoles (collectively referred to as BTs)¹ are ubiquitous water contaminants. In this paper, the adsorption behavior of BTs on polyvinyl chloride (PVC) MPs was first studied systematically to explain the adsorptive mechanisms and the consequential pollution caused by the absorption-desorption process. The studies on kinetics, isotherms, and thermodynamics revealed that the adsorption of BTs on PVC MPs was a multi-rate, heterogeneous multi-layer, and exothermic process, which was affected by external diffusion, intra-particle diffusion, and dynamic equilibrium. The factors including pH, salinity, and particle size also influenced the adsorption process. In the multi-solute system, competitive adsorption would occur between different BTs. The desorption of BTs from PVC MPs was positively associated with the increase of adsorption amount. Based on the results, the adsorption mechanisms of PVC MPs were clarified, involving hydrophobic interaction, electrostatic force, and non-covalent bonds. It was demonstrated that BTs in the water environment could most probably be accumulated and migrated through MPs, and eventually carried into organisms, posing an increased risk to the ecological environment.

Pollution characteristics, exposure assessment and potential cardiotoxicities of PM2.5-bound benzotriazole and its derivatives in typical Chinese cities

Benzotriazole and its derivatives (BTRs), classified as high-volume production chemicals, have been widely detected in various environmental media, including the atmosphere, water, soil and dust, as well as organisms. However, studies on the pollution characteristics and health impact of PM_2.5 related BTRs are so far limited. This study is the first to demonstrate the regional scale distribution of PM_2.5-bound BTRs and their potential cardiotoxicities. Optimized methods of extraction, purification and GC-EI-MS/MS were applied to characterize and analyze PM_2.5-bound BTRs from three cities in China during the winter of 2018. The concentration of ∑BTRs in Taiyuan (6.28 ng·m^-3) was more than three times that in Shanghai (1.53 ng·m^-3) and Guangzhou (1.99 ng·m^-3). Benzotriazole (BTR) and 5-methyl-1H-benzotriazole (5TTR) contributed more than 80% of ∑BTRs concentration as the major pollutants among three cities. The correlation analysis indicated that there was a positive correlation between temperature and concentration of BTR and a negative correlation between temperature and concentration of 5TTR. In addition, the risk of BTRs exposure to toddlers should be paid more attention in Taiyuan by the human exposure assessment. Furthermore, toxicity screening by experimental methods indicated that 4-methyl-1H-benzotriazole (4TTR) was the most harmful to cardiomyocytes. The western blot assay showed a ROS-mediated mitochondrial apoptosis signaling pathway was activated after exposure to 4TTR in neonatal rat cardiomyocytes (NRCMs). On the other hand, metabolomics revealed that exposure of 4TTR to NRCMs disturbed mitochondrial energy metabolism by disturbing pantothenate and coenzyme A synthesis pathway. Our study not only clarifies the contamination profiles of PM_2.5-bound BTRs in typical Chinese cities but also reveals their cardiotoxicities associated with mitochondrial dysfunction.