1
|
Zhu J, Cheng Y, Wang Z, Zhang J, Yue Y, Qian G. Low-energy production of a monolithic catalyst with MnCu-synergetic enhancement for catalytic oxidation of volatile organic compounds. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2023; 336:117688. [PMID: 36907063 DOI: 10.1016/j.jenvman.2023.117688] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/20/2022] [Revised: 02/21/2023] [Accepted: 03/06/2023] [Indexed: 06/18/2023]
Abstract
Producing a low-cost catalyst by a low-cost method is one of the hottest topics in the field of catalytic oxidization of volatile organic compounds (VOCs). In this work, a catalyst formula with a low-energy requirement was optimized in the powdered state, and verified in the monolithic state. An effective MnCu catalyst was synthesized at a temperature as low as 200 °C. Removals were all bigger than 88% for toluene, ethyl acetate, hexane, formaldehyde, and cyclohexanone at a low temperature of 240 °C. The MnCu catalyst was then loaded on a honeycomb cordierite, which was also effective for toluene removal at 240 °C. After characterizations, active phases were Mn3O4/CuMn2O4 in both the powdered and monolithic catalysts. The enhanced activity was attributed to balanced distributions of low-valence Mn and Cu, as well as abundant surface oxygen vacancies. The obtained catalyst is produced by low energy and effective at low temperature, which suggests a perspective application.
Collapse
Affiliation(s)
- Jun Zhu
- SHU Center of Green Urban Mining & Industry Ecology, School of Environmental and Chemical Engineering, Shanghai University, No. 381 Nanchen Road, Shanghai, 200444, PR China
| | - Yu Cheng
- SHU Center of Green Urban Mining & Industry Ecology, School of Environmental and Chemical Engineering, Shanghai University, No. 381 Nanchen Road, Shanghai, 200444, PR China
| | - Zongfang Wang
- SHU Center of Green Urban Mining & Industry Ecology, School of Environmental and Chemical Engineering, Shanghai University, No. 381 Nanchen Road, Shanghai, 200444, PR China
| | - Jia Zhang
- SHU Center of Green Urban Mining & Industry Ecology, School of Environmental and Chemical Engineering, Shanghai University, No. 381 Nanchen Road, Shanghai, 200444, PR China.
| | - Yang Yue
- MGI of Shanghai University, Xiapu Town, Xiangdong District, Pingxiang City, Jiangxi, 337022, PR China.
| | - Guangren Qian
- MGI of Shanghai University, Xiapu Town, Xiangdong District, Pingxiang City, Jiangxi, 337022, PR China
| |
Collapse
|
2
|
He Y, Shen J, Alharbi NS, Chen C. Volatile organic compounds degradation by nonthermal plasma: a review. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:32123-32152. [PMID: 36710313 DOI: 10.1007/s11356-023-25524-5] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/08/2022] [Accepted: 01/19/2023] [Indexed: 06/18/2023]
Abstract
Volatile organic compounds (VOCs) have posed a severe threat on both ecosystem and human health which thus have gained much attention in recent years. Nonthermal plasma (NTP) as an alternative to traditional methods has been employed to degrade VOC in the atmosphere and wastewater for its high removal efficiency (up to 100%), mild operating conditions, and environmental friendliness. This review outlined the principles of NTP production and the applications on VOC removal in different kinds of reactors, like single/double dielectric barrier discharge, surface discharge, and gliding arc discharge reactors. The combination of NTP with catalysts/oxidants was also applied for VOC degradation to further promote the energy efficiency. Further, detailed explanations were given of the effect of various important factors including input/reactor/external conditions on VOC degradation performance. The reactive species (e.g., high-energy electrons, HO·, O·, N2+, Ar+, O3, H2O2) generated in NTP discharge process have played crucial roles in decomposing VOC molecules; therefore, their variation under different parameter conditions along with the reaction mechanisms involved in these NTP technologies was emphatically explained. Finally, a conclusion of the NTP technologies was presented, and special attention was paid to future challenges for NTP technologies in VOC treatment to stimulate the advances in this topic.
Collapse
Affiliation(s)
- Yuan He
- Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, P.O. Box 1126, Hefei, 230031, People's Republic of China
- University of Science and Technology of China, Hefei, 230000, People's Republic of China
| | - Jie Shen
- Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, P.O. Box 1126, Hefei, 230031, People's Republic of China
| | - Njud S Alharbi
- Department of Biological Sciences, Faculty of Science, King Abdulaziz University, Jeddah, 21589, Saudi Arabia
| | - Changlun Chen
- Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, P.O. Box 1126, Hefei, 230031, People's Republic of China.
| |
Collapse
|
3
|
Ursueguía D, Daniel C, Collomb C, Cardenas C, Farrusseng D, Díaz E, Ordóñez S. Evaluation of HKUST-1 as Volatile Organic Compound Adsorbents for Respiratory Filters. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:14465-14474. [PMID: 36383640 DOI: 10.1021/acs.langmuir.2c02332] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Cyclohexane is a representative of volatile organic compounds (VOCs). VOCs can cause serious health problems in case of continuous exposure; therefore, it is essential to develop efficient personal protective equipment. Historically, activated carbons are used as VOC adsorbents. However, the emergence of promising novel adsorbents, such as metal-organic frameworks, has pushed the research to study their behavior under the same conditions. In this work, the use of the well-known HKUST-1 MOF of different particle sizes (20 μm, 300-600 μm, and 1-1.18 mm) for the adsorption of low-grade (5000 ppm) cyclohexane combined with different water concentrations (dry, 27 and 80% RH) in a fixed bed is proposed. The results were compared under the same conditions for a typically used activated carbon, PICACTIF TA 60. HKUST-1 has higher affinity to cyclohexane than PICACTIF for the whole pressure range studied, especially at low partial pressures. It begins to adsorb much earlier (0.0025 kPa) than the activated carbon (0.01 kPa). However, a different adsorption behavior is evidenced for both materials in the presence of water vapor since HKUST-1 is very hydrophilic in the zone near to the copper open metal sites, whereas PICACTIF is hydrophobic. After three consecutive cycles, good stability results were obtained for the MOF, comparable to activated carbon, even in the presence of water. As the main finding, although the unstability of HKUST-1 is well established under high humid conditions, the kinetic of degradation has not been established so far. Here, it is shown that the time usage of HKUST-1 as the adsorbent for respiratory mask (single pass) is not affected by the degradation of the structure, which may occur on a longer time scale. Finally, shaping by tableting provides good results since it is possible to increase the MOF density by around 69% with minor loss of adsorption capacity. The best fraction is 300-600 μm, reaching cyclohexane breakthrough times around 85 min/cm3 at 80% RH, comparable with PICACTIF-activated carbon and promising for practical applications.
Collapse
Affiliation(s)
- D Ursueguía
- Univ. Lyon, Université Claude Bernard Lyon 1, CNRS, IRCELYON, Villeurbanne F-69626, France
- Catalysis, Reactors and Control Research Group (CRC), Department of Chemical Engineering and Environmental Technology, University of Oviedo, Julián Clavería s/n, Oviedo 33006, Spain
| | - C Daniel
- Univ. Lyon, Université Claude Bernard Lyon 1, CNRS, IRCELYON, Villeurbanne F-69626, France
| | - C Collomb
- Univ. Lyon, Université Claude Bernard Lyon 1, CNRS, IRCELYON, Villeurbanne F-69626, France
| | - C Cardenas
- Univ. Lyon, Université Claude Bernard Lyon 1, CNRS, IRCELYON, Villeurbanne F-69626, France
| | - D Farrusseng
- Univ. Lyon, Université Claude Bernard Lyon 1, CNRS, IRCELYON, Villeurbanne F-69626, France
| | - E Díaz
- Catalysis, Reactors and Control Research Group (CRC), Department of Chemical Engineering and Environmental Technology, University of Oviedo, Julián Clavería s/n, Oviedo 33006, Spain
| | - S Ordóñez
- Catalysis, Reactors and Control Research Group (CRC), Department of Chemical Engineering and Environmental Technology, University of Oviedo, Julián Clavería s/n, Oviedo 33006, Spain
| |
Collapse
|
4
|
Zhang J, Zou J, Xu X, Li Z, Zeng Z, Li L. Nitrogen-Doped Porous Carbon from Biomass with Efficient Toluene Adsorption and Superior Catalytic Performance. MATERIALS (BASEL, SWITZERLAND) 2022; 15:8115. [PMID: 36431602 PMCID: PMC9698617 DOI: 10.3390/ma15228115] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/08/2022] [Revised: 11/04/2022] [Accepted: 11/14/2022] [Indexed: 06/16/2023]
Abstract
The chemical composition and surface groups of the carbon support affect the adsorption capacity of toluene. To investigate the effect of catalyst substrate on the catalytic performance, two different plant biomasses, banana peel and sugarcane peel, were used as carbon precursors to prepare porous carbon catalyst supports (Cba, Csu, respectively) by a chemical activation method. After decorating PtCo3 nanoparticles onto both carbon supports (Cba, Csu), the PtCo3-su catalyst demonstrated better catalytic performance for toluene oxidation (T100 = 237 °C) at a high space velocity of 12,000 h-1. The Csu support possessed a stronger adsorption capacity of toluene (542 mg g-1), resulting from the synergistic effect of micropore volume and nitrogen-containing functional groups, which led to the PtCo3-su catalyst exhibiting a better catalytic performance. Moreover, the PtCo3-su catalyst also showed excellent stability, good water resistance properties, and high recyclability, which can be used as a promising candidate for practical toluene catalytic combustion.
Collapse
Affiliation(s)
- Jing Zhang
- School of Energy Science and Engineering, Central South University, Changsha 410083, China
| | - Jianwu Zou
- School of Energy Science and Engineering, Central South University, Changsha 410083, China
| | - Xiang Xu
- School of Energy Science and Engineering, Central South University, Changsha 410083, China
| | - Zhuang Li
- Hunan Ecological and Environmental Affairs Center, Changsha 410014, China
| | - Zheng Zeng
- School of Energy Science and Engineering, Central South University, Changsha 410083, China
| | - Liqing Li
- School of Energy Science and Engineering, Central South University, Changsha 410083, China
| |
Collapse
|
5
|
Zheng Y, Huang W, Chen W, Li X, Wang X, Zhang Z, Wu C, Fu L. Effect analysis of initial water content and temperature on the adsorption of VOCs by activated carbon based on molecular simulation. Mol Phys 2022. [DOI: 10.1080/00268976.2022.2137066] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
Affiliation(s)
- Yongyin Zheng
- Jiangsu Provincial Key Laboratory of Oil-Gas Storage and Transportation Technology, Engineering Technology Research Centre for Oil Vapor Recovery, Changzhou University, Changzhou, People’s Republic of China
| | - Weiqiu Huang
- Jiangsu Provincial Key Laboratory of Oil-Gas Storage and Transportation Technology, Engineering Technology Research Centre for Oil Vapor Recovery, Changzhou University, Changzhou, People’s Republic of China
| | - Weihua Chen
- Jiangsu Provincial Key Laboratory of Oil-Gas Storage and Transportation Technology, Engineering Technology Research Centre for Oil Vapor Recovery, Changzhou University, Changzhou, People’s Republic of China
| | - Xufei Li
- Jiangsu Provincial Key Laboratory of Oil-Gas Storage and Transportation Technology, Engineering Technology Research Centre for Oil Vapor Recovery, Changzhou University, Changzhou, People’s Republic of China
- School of Materials Science and Engineering, Changzhou University, Changzhou, People’s Republic of China
| | - Xinya Wang
- Jiangsu Provincial Key Laboratory of Oil-Gas Storage and Transportation Technology, Engineering Technology Research Centre for Oil Vapor Recovery, Changzhou University, Changzhou, People’s Republic of China
- School of Materials Science and Engineering, Changzhou University, Changzhou, People’s Republic of China
| | - Zhen Zhang
- Jiangsu Provincial Key Laboratory of Oil-Gas Storage and Transportation Technology, Engineering Technology Research Centre for Oil Vapor Recovery, Changzhou University, Changzhou, People’s Republic of China
| | - Chunyan Wu
- Jiangsu Provincial Key Laboratory of Oil-Gas Storage and Transportation Technology, Engineering Technology Research Centre for Oil Vapor Recovery, Changzhou University, Changzhou, People’s Republic of China
| | - Lipei Fu
- Jiangsu Provincial Key Laboratory of Oil-Gas Storage and Transportation Technology, Engineering Technology Research Centre for Oil Vapor Recovery, Changzhou University, Changzhou, People’s Republic of China
| |
Collapse
|
6
|
Indoor Air Photocatalytic Decontamination by UV–Vis Activated CuS/SnO2/WO3 Heterostructure. Catalysts 2022. [DOI: 10.3390/catal12070728] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2023] Open
Abstract
A titania-free heterostructure based on CuS/SnO2/WO3 was obtained by a three-step sol–gel method followed by spray deposition on the glass substrate. The samples exhibit crystalline structures and homogenous composition. The WO3 single-component sample morphology consists of fibers that serve as the substrate for SnO2 development. The CuS/SnO2/WO3 heterostructure is characterized by a dense granular morphology. Photocatalytic activity was evaluated under UV–Vis radiation and indicates that the WO3 single-component sample is able to remove 41.1% of acetaldehyde (64.9 ppm) and 52.5% of formaldehyde (81.4 ppm). However, the CuS/SnO2/WO3 exhibits a superior photocatalytic activity due to a larger light spectrum absorption and lower charge carrier recombination rate, allowing the removal of 69.2% of acetaldehyde and 78.5% of formaldehyde. The reusability tests indicate that the samples have a stable photocatalytic activity after three cycle (12 h/cycle) assessments. During light irradiation, the heterostructure acted as a Z-scheme mechanism using the redox ability of the CuS conduction band electrons and the SnO2/WO3 valence band holes to generate the oxidative species required for VOC removal.
Collapse
|
7
|
Ma X, Yang L, Hou Y, Zhou L. Adsorption/desorption characteristics of low-concentration semi-volatile organic compounds in vapor phase on activated carbon. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2022; 305:114360. [PMID: 34954680 DOI: 10.1016/j.jenvman.2021.114360] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/13/2021] [Revised: 11/23/2021] [Accepted: 12/18/2021] [Indexed: 06/14/2023]
Abstract
The adsorption/desorption behaviors of semi-volatile organic compounds (SVOCs: 1,2,3,4-tetrachlorobenzene (TCB) and phenol) in vapor phase by activated carbon (AC) were investigated by the experiments and density functional theory calculation. Investigations showed that at 100-160 °C, the adsorption capacities of TCB and phenol on AC were in the range of 176.6-342.0 mg/g and 24.0-66.4 mg/g, respectively. Increasing the temperature inhibited the SVOCs adsorption. TCB tended to be adsorbed on AC surface by monolayer, whereas the phenol was multilayer adsorption. The stronger interaction between SVOCs and active sites resulted in a higher desorption temperature (TCB: 255-689 °C; phenol: 200-369 °C). The SVOCs adsorption on AC was fitted well by the pseudo-first-order kinetic model, their lower concentration and larger molecular structure influenced the AC external mass transfer and intraparticle diffusion. TCB and phenol were adsorbed on graphite layer by a parallel manner, their highest adsorption energies were -75.59 kJ/mol and -55.00 kJ/mol, respectively. Oxygen-containing groups altered the charge distribution of the atoms at the edge of the graphite layer, which improved the SVOCs adsorption through enhancement of electrostatic interactions and formation of hydrogen bonds. The carboxyl and lactone groups played a critical role in improving the TCB adsorption capacity, while the carboxyl was important for phenol adsorption.
Collapse
Affiliation(s)
- Xiuwei Ma
- Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, 210096, China
| | - Linjun Yang
- Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, 210096, China.
| | - Yong Hou
- Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, 210096, China
| | - Lei Zhou
- National-Local Joint Engineering Research Center of Heavy Metals Pollutants Control and Resource Utilization, Nanchang Hangkong University, Nanchang, 330063, China
| |
Collapse
|
8
|
Ma X, Wang W, Sun C, Li H, Sun J, Liu X. Adsorption performance and kinetic study of hierarchical porous Fe-based MOFs for toluene removal. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 793:148622. [PMID: 34328958 DOI: 10.1016/j.scitotenv.2021.148622] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/21/2021] [Revised: 06/17/2021] [Accepted: 06/19/2021] [Indexed: 06/13/2023]
Abstract
In light of the promising merits of large surface area, uniform pore size, and tunable functional groups, metal-organic frameworks (MOFs) have great potential to be utilized for adsorbing volatile organic compounds (VOCs). In this study, three Fe-based MOFs, MIL-100(Fe), MIL-101(Fe), and MIL-53(Fe), were synthesized systematically and used to adsorb a typical VOC, toluene. Static adsorption, dynamic breakthrough curves, and adsorption kinetics were conducted to assess the adsorption performance. Additionally, the surface functional groups, pore structure, and morphology were systematically characterized by means of XRD, SEM, XPS, FTIR and N2 adsorption-desorption analyses to reveal the cause of the difference in adsorption of these Fe-based MOFs. The results revealed that the maximum equilibrium adsorption capacity of 663 mg/g was achieved by MIL-100(Fe) with the highest specific surface area and pore volume. The dynamic adsorption of toluene on MIL-100(Fe) was in accordance with the pseudo-first order kinetic model and the Langmuir isothermal model. The formed π-π stacking interaction between organic ligands and the benzene ring in the MIL-100(Fe) cluster is the primary adsorption mechanism based on XPS analysis. Moreover, MIL-100(Fe) was easily regenerated via microwave irradiation with a negligible adsorption capacity decrease after three cycles. This work highlights the feasibility of hierarchical porous Fe-based MOFs as toluene adsorbents and promotes the application of MOFs in the field of pollution control.
Collapse
Affiliation(s)
- Xiaoling Ma
- National Engineering Laboratory for Reducing Emissions from Coal Combustion, Engineering Research Center of Environmental Thermal Technology of Ministry of Education, Shandong Key Laboratory of Energy Carbon Reduction and Resource Utilization, School of Energy and Power Engineering, Shandong University, Jinan, Shandong 250061, PR China
| | - Wenlong Wang
- National Engineering Laboratory for Reducing Emissions from Coal Combustion, Engineering Research Center of Environmental Thermal Technology of Ministry of Education, Shandong Key Laboratory of Energy Carbon Reduction and Resource Utilization, School of Energy and Power Engineering, Shandong University, Jinan, Shandong 250061, PR China.
| | - Chenggong Sun
- Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, UK.
| | - Hui Li
- School of Thermal Engineering, Shandong Jianzhu University, Jinan 250101, PR China
| | - Jing Sun
- National Engineering Laboratory for Reducing Emissions from Coal Combustion, Engineering Research Center of Environmental Thermal Technology of Ministry of Education, Shandong Key Laboratory of Energy Carbon Reduction and Resource Utilization, School of Energy and Power Engineering, Shandong University, Jinan, Shandong 250061, PR China
| | - Xin Liu
- Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, UK
| |
Collapse
|
9
|
Li Z, Jin Y, Chen T, Tang F, Cai J, Ma J. Trimethylchlorosilane modified activated carbon for the adsorption of VOCs at high humidity. Sep Purif Technol 2021. [DOI: 10.1016/j.seppur.2021.118659] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
10
|
Jeon J, Kim HI, Park JH, Wi S, Kim S. Evaluation of thermal properties and acetaldehyde adsorption performance of sustainable composites using waste wood and biochar. ENVIRONMENTAL RESEARCH 2021; 196:110910. [PMID: 33639144 DOI: 10.1016/j.envres.2021.110910] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Revised: 02/03/2021] [Accepted: 02/17/2021] [Indexed: 06/12/2023]
Abstract
In order to vitalize the use of wood, which is a sustainable resource, increase the utilization of resources through the recycling of wood waste, and reduce environmental pollution in the waste disposal process, biocomposite was manufactured by using biochar which can be produced with wood waste and is effective in carbon isolation. The thermal characteristics and acetaldehyde adsorption performance of the prepared biocomposite were evaluated based on the pore characteristics, surface functional groups, crystal structure, and elemental analysis results of the biochar. As a result of the experiment, as the content of biochar increased, the thermal conductivity of the biocomposite decreased and the specific heat was not affected. The acetaldehyde concentration tended to decrease as the content of biochar increased, adsorbed up to 4.4685 ppm of acetaldehyde more than the reference. From these results, it is judged that the biocomposite produced in this study can function as a sustainable composite that uses waste wood to improve indoor air quality and satisfies the performance as a building material.
Collapse
Affiliation(s)
- Jisoo Jeon
- Department of Architecture and Architectural Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Hyoung-Il Kim
- Department of Civil and Environmental Engineering, Yonsei University, Seoul, 03722, Republic of Korea
| | - Ji Hun Park
- Department of Architecture and Architectural Engineering, Yonsei University, Seoul 03722, Republic of Korea; Department of Building, Civil and Environmental Engineering, Concordia University, 1455 De Maisonneuve Blvd., Montreal, QC, H3G 1M8, Canada
| | - Seunghwan Wi
- Department of Architecture and Architectural Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Sumin Kim
- Department of Architecture and Architectural Engineering, Yonsei University, Seoul 03722, Republic of Korea.
| |
Collapse
|
11
|
Jareteg A, Maggiolo D, Larsson A, Thunman H, Sasic S, Ström H. Industrial-Scale Benzene Adsorption: Assessment of a Baseline One-Dimensional Temperature Swing Model against Online Industrial Data. Ind Eng Chem Res 2020. [DOI: 10.1021/acs.iecr.0c01590] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Adam Jareteg
- Division of Fluid Dynamics, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 412 96 Gothenburg, Sweden
| | - Dario Maggiolo
- Division of Fluid Dynamics, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 412 96 Gothenburg, Sweden
| | | | - Henrik Thunman
- Division of Energy Technology, Department of Space, Earth & Environment, Chalmers University of Technology, 412 96 Gothenburg, Sweden
| | - Srdjan Sasic
- Division of Fluid Dynamics, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 412 96 Gothenburg, Sweden
| | - Henrik Ström
- Division of Fluid Dynamics, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 412 96 Gothenburg, Sweden
- Division of Energy Technology, Department of Space, Earth & Environment, Chalmers University of Technology, 412 96 Gothenburg, Sweden
| |
Collapse
|