Removal of pharmaceuticals by fouled forward osmosis membranes: Impact of DOM fractions, Ca2+ and real water

Optimization and prediction of lead removal from aqueous solution using FO-MD hybrid process: Statistical and artificial intelligence analysis

Heavy metals (HMs) has become one of the most serious pollutants that are harmful to the environment and ecology. This paper focused on the removal of lead contaminant from wastewater by forward osmosis-membrane distillation (FO-MD) hybrid process using seawater as draw solution. Modeling, optimization, and prediction of FO performance are developed using complementary approach based on response surface methodology (RSM) and an artificial neural network (ANN). FO process optimization using RSM revealed that under initial lead concentration of 60 mg/L, feed velocity of 11.57 cm/s and draw velocity of 7.66 cm/s, FO process achieved highest water flux of 6.75 LMH, lowest reverse salt flux of 2.78 gMH and highest lead removal efficiency of 87.07%. Fitness of all models was evaluated based on determination coefficient (R²) and mean square error (MSE). Results showed highest R² value up to 0.9906 and lowest RMSE value up to 0.0102. ANN modeling generates the highest prediction accuracy for water flux and reverse salt flux, while RSM produces the highest prediction accuracy for lead removal efficiency. Subsequently, FO optimal conditions are applied on FO-MD hybrid process using seawater as draw solution and evaluate their performance to simultaneously remove lead contaminant and desalination of seawater. Results displays that FO-MD process shows a highly efficient solution to produce fresh water with almost free heavy metals and very low conductivity.

Environmental concerns and bioaccumulation of psychiatric drugs in water bodies - Conventional versus biocatalytic systems of mitigation

The COVID-19 pandemic has brought increments in market sales and prescription of medicines commonly used to treat mental health disorders, such as depression, anxiety, stress, and related problems. The increasing use of these drugs, named psychiatric drugs, has led to their persistence in aquatic systems (bioaccumulation), since they are recalcitrant to conventional physical and chemical treatments typically used in wastewater treatment plants. An emerging environmental concern caused by the bioaccumulation of psychiatric drugs has been attributed to the potential ecological and toxicological risk that these medicines might have over human health, animals, and plants. Thus, by the application of biocatalysis-assisted techniques, it is possible to efficiently remove psychiatric drugs from water. Biocatalysis, is a widely employed and highly efficient process implemented in the biotransformation of a wide range of contaminants, since it has important differences in terms of catalytic behavior, compared to common treatment techniques, including photodegradation, Fenton, and thermal treatments, among others. Moreover, it is noticed the importance to monitor transformation products of degradation and biodegradation, since according to the applied removal technique, different toxic transformation products have been reported to appear after the application of physical and chemical procedures. In addition, this work deals with the discussion of differences existing between high- and low-income countries, according to their environmental regulations regarding waste management policies, especially waste of the drug industry.

Insights into the characteristics, adsorption and desorption behaviors of microplastics aged with or without fulvic acid

Many aging experiments on microplastics (MPs) have been carried out using UV radiation or strong oxidants. Little attention has been paid to the role of water environmental factors such as dissolved organic matter (DOM). In this study, the role of fulvic acid (FA), the main component of DOM, in the UV-aging process of MPs was explored. MPs aged under UV, and UV along with 0.5 mg/L and 2 mg/L FA, were selected as subjects. The results showed that (1) FA accelerated the aging process of polyethylene (PE). PE aged with FA had a larger specific area (S_BET), with more holes and cracks on the surface. (2) FA enhanced the adsorption capacity of PE. The TC adsorption quantities of 0, 0.5, and 2 mg/L FA-aged PE were 1.100, 1.447, and 1.812 mg/L, respectively. (3) The quantity of TC desorbed by PE increased, whereas the desorption rate decreased as the FA concentration increased. The desorption rates of TC at 0, 0.5, and 2 mg/L FA-aged PE were 25.16%, 22.05%, and 19.52% in water, and 72.10%, 70.36%, and 59.51% in simulated intestinal fluid. This study explored the role of FA in the aging process of MPs. Moreover, research on the aging mechanism of MPs is enriched.

A novel conductive carbon-based forward osmosis membrane for dye wastewater treatment

Forward osmosis (FO) membrane fouling is one of the main reasons that hinder the further application of FO technology in the treatment of dye wastewater. To alleviate membrane fouling, a conductive coal carbon-based substrate and polydopamine nanoparticles (PDA NPs) interlayer composite FO membrane (CPFO) was prepared by interfacial polymerization (IP). CPFO-10 membrane prepared by depositing 10 mL of PDA NPs solution exhibited an optimum performance with water flux of 7.56 L/(m²h) for FO mode and 10.75 L/(m²h) for pressure retarded osmosis (PRO) mode, respectively. For rhodamine B and chrome black T dye wastewater treatment, the water flux losses were reduced by 21.6%, and 14.5% under the voltages of +1.5 V, and -1.5 V, respectively, compared with no voltage applied after the device was operated for 8 h. The applied voltage had little effect on the fouling mitigation performance of the CPFO membrane for neutral charged cresol red. After the device was operated for 4 cycles, the rejection rates of dyes wastewater treated by the CPFO membranes with applied voltage were close to 100%. The flux decline rate and flux recovery rate of CPFO membrane for rhodamine B and chrome black T wastewater treatment under application of +1.5 V and -1.5 V voltage after 4 cycles were 11.6%, 99.2%, and 16.7%, 98.9%, respectively. Therefore, the voltage-applied CPFO membrane still maintained good rejection and antifouling performance in long-term operation. This study provides a new insight into the preparation of conductive FO membranes for dye wastewater treatment and membrane fouling control.

Rejection of trace organic compounds by membrane processes: mechanisms, challenges, and opportunities

This work critically reviews the application of various membrane separation processes (MSPs) in treating water polluted with trace organic compounds (TOrCs) paying attention to nanofiltration (NF), reverse osmosis (RO), membrane bioreactor (MBR), forward osmosis (FO), and membrane distillation (MD). Furthermore, the focus is on loopholes that exist when investigating mechanisms through which membranes reject/retain TOrCs, with the emphasis on the characteristics of the model TOrCs which would facilitate the identification of all the potential mechanisms of rejection. An explanation is also given as to why it is important to investigate rejection using real water samples, especially when aiming for industrial application of membranes with novel materials. MSPs such as NF and RO are prone to fouling which often leads to lower permeate flux and solute rejection, presumably due to cake-enhanced concentration polarisation (CECP) effects. This review demonstrates why CECP effects are not always the reason behind the observed decline in the rejection of TOrCs by fouled membranes. To mitigate for fouling, researchers have often modified the membrane surfaces by incorporating nanoparticles. This review also attempts to explain why nano-engineered membranes have not seen a breakthrough at industrial scale. Finally, insight is provided into the possibility of harnessing solar and wind energy to drive energy intensive MSPs. Focus is also paid into how low-grade energy could be stored and applied to recover diluted draw solutions in FO mode.

A review on pharmaceuticals removal from waters by single and combined biological, membrane filtration and ultrasound systems

Contaminants of emerging concern (CEC) such as pharmaceuticals commonly found in urban and industrial wastewater are a potential threat to human health and have negative environmental impact. Most wastewater treatment plants cannot efficiently remove these compounds and therefore, many pharmaceuticals end up in aquatic ecosystems, inducing problems such as toxicity and antibiotic-resistance. This review reports the extent of pharmaceutical removal by individual processes such as bioreactors, advanced oxidation processes and membrane filtration systems, all of which are not 100% efficient and can lead to the direct discharge of pharmaceuticals into water bodies. Also, the importance of understanding biotransformation of pharmaceutical compounds during biological and ultrasound treatment, and its impact on treatment efficacy will be reviewed. Different combinations of the processes above, either as an integrated configuration or in series, will be discussed in terms of their degradation efficiency and scale-up capabilities. The trace quantities of pharmaceutical compounds in wastewater and scale-up issues of ultrasound highlight the importance of membrane filtration as a concentration and volume reduction treatment step for wastewater, which could subsequently be treated by ultrasound.

Accurate Quantification of Nervous System Drugs in Aqueous Samples at Trace Levels by Binary Solvent Dispersive Liquid-Liquid Microextraction-Gas Chromatography Mass Spectrometry

Pharmaceutical products are widely consumed globally and are commonly found in wastewaters as a result of constant excretion and disposal into sewers. The present study proposes an efficient binary solvent dispersive liquid-liquid microextraction (BS-DLLME) method that was developed for preconcentration of 7 nervous system drug active compounds from aqueous media for their determination at trace levels by gas chromatography-mass spectrometry. The drug analytes included 3 antidepressants, 2 antipsychotics, 1 antiepileptic, and 1 antidementia. Optimum conditions of the BS-DLLME method were acquired by univariate optimization of parameters including type of binary solvents, ratio of binary solvents, type of disperser solvent, volume of binary solvents, and volume of disperser solvent. Detection and quantification limits were calculated in the range of 0.28 to 6.5 µg/L. Municipal wastewater, medical wastewater, synthetic domestic wastewater, and lake water were utilized as real samples in spike recovery experiments; and the results (94-106%) indicated the method's applicability and accuracy at quantifying the analytes in complex matrices. Environ Toxicol Chem 2021;40:1570-1575. © 2021 SETAC.

Thin film nanocomposite membrane with triple-layer structure for enhanced water flux and antibacterial capacity

Triple-layered thin film composite (TFC) forward osmosis (FO) membranes prepared on interlayer-based supports have overcome the limitations of conventional porous substrates due to the formation of ultrathin and highly selective polyamide (PA) layers. However, mitigating the internal concentration polarization (ICP) and biofouling of TFC membranes remain a great challenge. Herein, we designed a novel triple-layered thin film nanocomposite (TFN) FO membrane with incorporation of silver (Ag) decorated graphene oxide quantum dots (GOQD) into PA layer via interfacial polymerization on a carbon nanotube (CNT) interlayer-based polyether sulfone substrate. By contrast with the TFC membranes, the newly developed GOQD/Ag incorporated triple-layered TFN membrane (TFN-GOQD/Ag) exhibited a great alleviation for ICP accompanied with a prominently enhanced water flux of 65.8 L·m^-2·h^-1 and decreased specific reverse salt flux of 1.4 g·m^-2·h^-1 by employing 1 M NaCl solution as draw solution. Moreover, the TFN-GOQD/Ag membrane possessed prominent antibacterial activity against both E. coli (99.8%) and S. aureus (97.3%). Noteworthy, the obtained TFN membrane demonstrated a controlled release of Ag⁺ along with long-term antibacterial potential and outstanding fouling resistance during the FO process. This work provides a new avenue to fabricate newly FO membranes with superior performance for water cleaning treatment.