Functional CdS nanocomposites recovered from biomineralization treatment of sulfate wastewater and its applications in the perspective of photocatalysis and electrochemistry

Intercalating Organic Hybrid Cadmium Antimony Sulfide Nanoparticles into Graphene Oxide Nanosheets for Electrochemical Lithium Storage

Inorganic metal sulfides have received extensive investigation as anode materials in lithium-ion batteries (LIBs). However, applications of crystalline organic hybrid metal sulfides as anode materials in LIBs are quite rare. In addition, combining the nanoparticles of crystalline organic hybrid metal sulfides with conductive materials is expected to enhance the electrochemical lithium storage performance. Nevertheless, due to the difficulty of harvesting the nanoparticles of crystalline organic hybrid metal sulfides, this approach has never been tried to date. Herein, nanoparticles of a crystalline organic hybrid cadmium antimony sulfide (1,4-DABH2)Cd2Sb2S6 (DCAS) were prepared by a top-down method, including the procedures of solvothermal synthesis, ball milling, and ultrasonic pulverization. Thereafter, the nanoparticles of DCAS with sizes of ∼500 nm were intercalated into graphene oxide nanosheets through a freeze-drying treatment and a DCAS@GO composite was obtained. Compared with the reported Sb2S3- and CdS-based composites, the DCAS@GO composite exhibited superior electrochemical Li+ ion storage performance, including a high capacity of 1075.6 mAh g-1 at 100 mA g-1 and exceptional rate tolerances (646.8 mAh g-1 at 5000 mA g-1). In addition, DCAS@GO can provide a high capacity of 705.6 mAh g-1 after 500 cycles at 1000 mA g-1. Our research offers a viable approach for preparing the nanoparticles of crystalline organic hybrid metal sulfides and proves that intercalating organic hybrid metal sulfide nanoparticles into GO nanosheets can efficiently boost the electrochemical Li+ ion storage performance.

Construction of novel photocatalysts for efficient hydrogen evolution: The key role of natural halloysite nanotubes

Hydrogen (H2) evolution by photocatalytic water splitting is a potential strategy to solve worldwide energy shortage. Sulfide nanocatalysts showed great potential for H2 evolution, but suffered from low charge separation efficiency and easy agglomeration. In this work, ZnIn2S4 (ZIS) nanoflowers were anchored onto the surface of halloysite nanotubes (HNTs) modified by ethylenediaminetetraacetic acid (EDTA). Photocatalyst 3ZnIn2S4-HNTs/EDTA3 (3ZIS-HNTs/E3) displayed the optimum H2 evolution rate of 10.4 mmol·g-1·h-1, being 3.4 times as that of the original ZIS. Moreover, 3ZIS-HNTs/E3 presented satisfied property in the photocatalytic hydrogenation reaction of 4-nitrophenol to produce 4-aminophenol. HNTs as substrates not only hindered the growth and agglomeration of ZIS, but also induced more S vacancies in ZIS. The production of Schottky junctions between ZIS and Pt, the high utilization of light energy in tubular HNTs, and the trapping effect of EDTA for photogenerated h+ were all favorable for enhancing the catalytic property. The density functional theory (DFT) calculations showed that 3ZIS-HNTs/E3 with more S vacancies had the lowest adsorption energy and the most appropriate ΔGH* for H* to enhance the H2 evolution efficiency, which was consistent with the experimental catalytic results. This study contributes a novel thought for synthesizing composites on the basis of natural minerals for taking part in and enhancing the catalytic performance.

Stability and biomineralization of cadmium sulfide nanoparticles biosynthesized by the bacterium Rhodopseudomonas palustris under light

Cadmium (Cd) pollution is regarded as a potent problem due to its hazard risks to the environment, making it crucial to be removed. Compared to the physicochemical techniques (e.g., adsorption, ion exchange, etc.), bioremediation is a promising alternative technology for Cd removal, due to its cost-effectiveness, and eco-friendliness. Among them, microbial-induced cadmium sulfide mineralization (Bio-CdS NPs) is a process of great significance for environmental protection. In this study, microbial cysteine desulfhydrase coupled with cysteine acted as a strategy for Bio-CdS NPs by Rhodopseudomonas palustris. The synthesis, activity, and stability of Bio-CdS NPs-R. palustris hybrid was explored under different light conditions. Results show that low light (LL) intensity could promote cysteine desulfhydrase activities to accelerate hybrid synthesis, and facilitated bacterial growth by the photo-induced electrons of Bio-CdS NPs. Additionally, the enhanced cysteine desulfhydrase activity effectively alleviated high Cd-stress. However, the hybrid rapidly dissolved under changed environmental factors, including light intensity and oxygen. The factors affecting the dissolution were ranked as follows: darkness/microaerobic ≈ darkness/aerobic < LL/microaerobic < high light (HL)/microaerobic < LL/aerobic < HL/aerobic. The research provides a deeper understanding of Bio-CdS NPs-bacteria hybird synthesis and its stability in Cd-polluted water, allowing advanced bioremediation treatment of heavy metal pollution in water.

Biomineralization behavior and mechanism of microbial-mediated removal of arsenate from water

The microbial-mediated removal of arsenate by biomineralization received much attention, but the molecular mechanism of Arsenic (As) removal by mixed microbial populations remains to be elucidated. In this study, a process for the arsenate treatment using sulfate-reducing bacteria (SRB) containing sludge was constructed, and the performance of As removal was investigated at different molar ratios of AsO₄^3- to SO₄^2-. It was found that biomineralization mediated by SRB could achieve the simultaneous removal of arsenate and sulfate from wastewater but only occurred when microbial metabolic processes were involved. The reducing ability of the microorganisms for the sulfate and arsenate was equivalent, so the precipitates produced at the molar ratio of AsO₄^3- to SO₄^2-of 2:3 were most significant. X-ray absorption fine structure (XAFS) spectroscopy was the first time used to determine the molecular structure of the precipitates which were confirmed to be orpiment (As₂S₃). Combined with the metagenomics analysis, the microbial metabolism mechanism of simultaneous removal of sulfate and arsenate by the mixed microbial population containing SRB was revealed, that is, the sulfate and As(V) were reduced by microbial enzymes to produce S^2- and As(III) to further form As₂S₃ precipitates. This research provided a reference and theoretical foundation for the simultaneous removal of sulfate and arsenic mediated by SRB-containing sludge in wastewater treatment.

Enhanced activity of ZnS (111) by N/Cu co-doping: Accelerated degradation of organic pollutants under visible light

High-efficiency photocatalysts are of great significance for the application of photocatalytic technology in water treatment. In this study, N/Cu co-doped ZnS nanosphere photocatalyst (N/Cu-ZnS) is synthesized by a hydrothermal method for the first time. After doping, the texture of nanosphere becomes loose, the nanometer diameter is reduced, making the specific surface area of catalyst increased from 34.73 to 101.59 m²/g. The characterization results show that more ZnS (111) crystal planes are exposed by N/Cu co-doping; the calculations of density functional theory show that N/Cu co-doping can increase the catalytic activity of the ZnS (111) crystal plane, enhance the adsorption capacity of (111) crystal plane to O₂, and promote the generation of •O₂^-. The energy levels of the introduced impurities can be hybridized with the energy levels of S and Zn at the top of valence band and the bottom of conduction band, which makes the band gap narrower, thus enhancing the absorption of visible light. Compared with pure ZnS, the degradation rates of 2,4-dichlorophenol (2,4-DCP) and tetracycline (TC) by N/Cu-ZnS under visible light (>420 nm) are increased by 83.7 and 51 times, respectively. In this research, a promising photocatalyst for photocatalytic degradation of organic pollutants in wastewater is provided.

Recent advances in bismuth oxyhalides photocatalysts and their applications

Bismuth oxyhalides photocatalysts exhibit great potential to solve the energy and environmental issues under visible light due to their unique physicochemical and optical properties. However, the photocatalytic activity of pristine bismuth oxyhalides remains unsatisfactory because of their inherent drawbacks. Up to now, many strategies have been used to improve the photocatalytic performance. In this review, the basic mechanism, unique properties and structure of bismuth oxyhalides photocatalysts have been introduced, and the common techniques of synthesis, modification, and main applications have been discussed. Finally, new insights are proposed to meet the future challenges and development of the photocatalysts, which can provide better knowledge for the advancement of the related research areas.

Microbe-mediated transformation of metal sulfides: Mechanisms and environmental significance

Microorganisms play a key role in the natural circulation of various constituent elements of metal sulfides. Some microorganisms (such as Thiobacillus ferrooxidans) can promote the oxidation of metal sulfides to increase the release of heavy metals. However, other microorganisms (such as Desulfovibrio vulgaris) can transform heavy metals into metal sulfides crystals. Therefore, insight into the metal sulfides transformation mediated by microorganisms is of great significance to environmental protection. In this review, first, we discuss the mechanism and influencing factors of microorganisms transforming heavy metals into metal sulfides crystals in different environments. Then, we explore three microbe-mediated transformation forms of heavy metals to metal sulfides and their environmental applications: (1) transformation to metal sulfides precipitation for metal resource recovery; (2) transformation to metal sulfides nanoparticles (NPs) for pollutant treatment; (3) transformation to "metal sulfides-microbe" biohybrid system for clean energy production and pollutant remediation. Finally, we further provide critical views on the application of microbe-mediated metal sulfides transformation in the environmental field and discuss the need for future research.

Continuous and efficient immobilization of heavy metals by phosphate-mineralized bacterial consortium

Traditional sewage treatment technology cannot remove heavy metals, which needs to be improved urgently. Lysinibacillus with the function of bio-mineralization was screened and loaded on granular sludge to form a phosphate-mineralized bacterial consortium, which demonstrated the ability of self-regulating pH and automatic solid-liquid separation. Heavy metals could be fixed on the bacterial consortium to produce stable and harmless phosphate minerals. The highest removal efficiency of Pb(Ⅱ), Cd(Ⅱ), and Ni(Ⅱ) were 97.9%, 70%, and 40%, respectively. Organic matter and other metal ions in actual polluted water had little effect on the Pb(Ⅱ) removal efficiency. Mechanism analysis was conducted through 3D-EEM, XRD, SEM-EDS, XPS, FTIR, and high-throughput sequencing analyses. The bacterial consortium was a multi-species coexistence system, but Lysinibacillus played a major role in removing Pb(Ⅱ). C-O and O-H bonds of tyrosine and phosphorous organics were broken by enzyme catalysis and the metal-oxygen bond (Pb-O) was formed. Mineral crystals in the reactor accumulated, transforming from the initial phase non-crystalline structure to the metaphase Pb₃(PO₄)₂ and eventually to the Pb₅(PO₄)₃OH. This research obtained a promising technique for immobilizing Pb(Ⅱ) or other hazardous metals continuously and efficiently.

Green light-driven acetone gas sensor based on electrospinned CdS nanospheres/Co3O4 nanofibers hybrid for the detection of exhaled diabetes biomarker

Morphological and structural characteristics of semiconductors have a significant impact on their gas sensing characteristics. Reasonable design and synthesis of heterojunctions with special structures can effectively improve sensor performance. Herein, a cobalt oxide (Co₃O₄) nanofibers/cadmium sulfide (CdS) nanospheres hybrid was synthesized by an electrospinning method combined with a hydrothermal method to detect acetone gas. By adjusting loading amount of CdS, the sensing performance of CdS/Co₃O₄ sensor for acetone at room temperature (25 °C) was greatly ameliorated. In particular, the response of CdS/Co₃O₄ to 50 ppm acetone gas increased by 25% under 520 nm green light, meanwhile, the response/recovery time was shortened to 5 s/4 s. This is attributed to the heterojunction formed between CdS and Co₃O₄ as well as the influence of light excitation on the carrier concentration of the surfaces. Meanwhile, the unique high-porosity fiber structure and the catalytic action of cobalt ions also play an essential role in improving the performance. Furthermore, practical diabetic breath was experimentally simulated and proved the potential of the sensor in the future application of disease-assisted diagnosis.

Development of Sustainable Heterogeneous Catalysts for the Photocatalytic Treatment of Effluents

The inadequate discharge of effluents from different sources without prior treatment can impact the characteristics of soil and water, which reflect serious environmental problems. Advanced oxidative processes (AOP) appear as a viable alternative for environmental remediation, including wastewater treatment. Herein, α-MoO3 and α-Fe2O3 semiconductors were synthesized at low temperature by a Pechini-based method and then applied in photocatalysis. The catalytic efficiency was performed under visible light toward the degradation of an organic persistent pollutant (Rhodamine B dye, RhB), commonly present in industries wastewater. The results indicated that the synthesized α-MoO3 or α-Fe2O3 photocatalysts presented a pronounced activity and promoted an efficient RhB degradation after 15 min of reaction. α-MoO3 had a degradation efficiency of 93% and 98%, while α-Fe2O3 showed 67% and 100% RhB degradation without and with the addition of H2O2, respectively. These results suggest that the synthesized oxides have high oxi-reductive capacity, which can be used for a fast and effective photodegradation of RhB and other organic persistent pollutants to minimize environmental impacts.