Methane-fueled microbial fuel cells with the formate-acclimating electroactive culture

Simultaneous Wastewater Treatment and Resources Recovery by Forward Osmosis Coupled with Microbial Fuel Cell: A Review

Osmotic microbial fuel cells (OsMFCs) with the abilities to simultaneously treat wastewater, produce clean water, and electricity provided a novel approach for the application of microbial fuel cell (MFC) and forward osmosis (FO). This synergistic merging of functions significantly improved the performances of OsMFCs. Nonetheless, despite their promising potential, OsMFCs currently receive inadequate attention in wastewater treatment, water reclamation, and energy recovery. In this review, we delved into the cooperation mechanisms between the MFC and the FO. MFC facilitates the FO process by promoting water flux, reducing reverse solute flux (RSF), and degrading contaminants in the feed solution (FS). Moreover, the water flux based on the FO principle contributed to MFC's electricity generation capability. Furthermore, we summarized the potential roles of OsMFCs in resource recovery, including nutrient, energy, and water recovery, and identified the key factors, such as configurations, FO membranes, and draw solutions (DS). We prospected the practical applications of OsMFCs in the future, including their capabilities to remove emerging pollutants. Finally, we also highlighted the existing challenges in membrane fouling, system expansion, and RSF. We hope this review serves as a useful guide for the practical implementation of OsMFCs.

Simultaneous denitrification and electricity generation in a methane-powered bioelectrochemical system

Bioelectrochemical system is a novel method for controlling down nitrate pollution, yet the feasibility of using methane as the electron donors for denitrification in this system remains unknown. In this study, using the effluent from mother BESs as inocula, a denitrifying anaerobic methane oxidation bioelectrochemical system was successfully started up in 92 days. When operated with 50 mmol/L phosphate buffer solution at pH 7 and 30°C, the maximum methane consumption, nitrate, and total nitrogen removal load reached 0.23 ± 0.01 mmol/d, 551.0 ± 22.1 mg N/m3 /d, and 64.0 ± 18.8 mg N/m3 /d, respectively. Meanwhile, the peak voltage of 93 ± 4 mV, the anodic coulombic efficiency of 6.99 ± 0.20%, and the maximum power density of 219.86 mW/m3 were obtained. The metagenomics profiles revealed that the dominant denitrifying bacteria in the cathodic chamber reduced most nitrate to nitrite through denitrification and assimilatory reduction. In the anodic chamber, various archaea including methanotrophs and methanogens converted methane via reverse methanogenesis to form formate (or H2 ), acetate, and methyl compounds, which were than utilized by electroactive bacteria to generate electricity. PRACTITIONER POINTS: A denitrifying anaerobic methane oxidation BES was successfully started up in 92 d. Simultaneous removal of methane and nitrate was achieved in the DAMO-BES. Functional genes related to AMO and denitrification were detected in the DAMO-BES. Methylocystis can mediate AMO in the anode and denitrification in the cathode.

Study on performance and mechanisms of anaerobic oxidation of methane-microbial fuel cells (AOM-MFCs) with acetate-acclimatizing or formate-acclimatizing electroactive culture

Anaerobic oxidation of methane-microbial fuel cells with acetate-acclimatizing or formate-acclimatizing electroactive culture (A-AOM-MFC and F-AOM-MFC) were designed and operated at room temperature in this study to evaluate and explore the electrochemical performance and mechanisms of methane conversion and electricity generation. The results indicated that A-AOM-MFC output a higher voltage (0.526 ± 0.001 V) and F-AOM-MFC started up in a shorter time (51 d), resulting from different mechanisms of methane-electrogen caused by discrepant microbial alliances. Specifically, in A-AOM-MFC, acetoclastic methanogens (e.g., Methanosaeta) converted methane into intermediates (e.g., acetate) through reversing methanogenesis and carried out the direct interspecific electron transfer (DIET) with Geobacter-predominated electricigens which can oxidize the intermediates to carbon dioxide and transfer electrons to the electrodes. Differently, the intermediate-dependent extracellular electron transfer (EET) existed in F-AOM-MFC between hydro-methanogens (e.g., Methanobacterium) and electricigens (e.g., Geothrix), which was more difficult than DIET. Additionally, hydro-methanogens metabolized methane to produce formate-dominant intermediates more quickly.

Biogas utilization without desulfurization pretreatment in a bioelectrochemical system

Utilizing biogas as a fuel for heating and power generation usually requires desulfurization pretreatment. In this study, the biogas utilization without desulfurization pretreatment in a bioelectrochemical system (BES) was explored. The results showed that the biogas-fueled BES was successfully started up within 36 d and the presence of hydrogen sulfide promoted both methane consumption and electricity generation. The optimal performance (i.e., a methane consumption of 0.523 ± 0.004 mmol/d, a peak voltage of 577 ± 1 mV, a coulomb production of 37.86 ± 0.43C/d, a coulombic efficiency of 9.37 ± 0.06 % and the maximum power density of 2.070 W/m³) was obtained under bicarbonate buffer solution and 40 °C conditions. The addition of 1 mg/L sulfide and 5 mg/L L-cysteine facilitated methane consumption and electricity generation. In the anode biofilm, the dominant bacteria were Sulfurivermis, unclassified_o__Ignavibacteriales and Lentimicrobium, while Methanobacterium, Methanosarcina and Methanothrix were the predominant archaea. Besides, the metagenomics profiles reveal that anaerobic methane oxidation and electricity generation were closely related to sulfur metabolism. These findings provide a novel approach for utilizing biogas without desulfurization pretreatment.

Metal nanoparticles increased the lag period and shaped the microbial community in slurry-electrode microbial electrosynthesis

Concerns about energy crisis and CO₂ emission have motivated the development of microbial electrosynthesis (MES); recent studies have showed the potential of novel slurry-electrode MES. In this study, the effect of nonprecious metal nanoparticles (NPs) on the performance of slurry-electrode MES was systematically evaluated in terms of chemical production, physicochemical properties, electrochemical characterization, and microbial community. Ni and Cu NPs increased the lag period from 6 to 15 days for acetate production, while Mo NPs showed no apparent effect. However, these metal NPs slightly affected the final total acetate production (ca. 10 g L^-1), Faradic efficiency (ca. 50%), net water flux across the anion exchange membrane (ca. 6 mL d^-1), or electrochemical characterization of catholyte. BRH-c20a was enriched as the dominated microbe (>48%), and its relative abundance was largely affected by the addition of metal NPs. This study demonstrates that metal NPs affect the performance of biocathodes, mainly by shaping the microbial community.