Recent advances in visible-light-driven carbon dioxide reduction by metal-organic frameworks

Advanced Functionalized Nanoclusters (Cu, Ag, and Au) as Effective Catalyst for Organic Transformation Reactions

A considerable amount of research has been carried out in recent years on synthesizing metal nanoclusters (NCs), which have wide applications in the field of optical materials with non-linear properties, bio-sensing, and catalysis. Aside from being structurally accurate, the atomically precise NCs possess well-defined compositions due to significant tailoring, both at the surface and the core, for certain functionalities. To illustrate the importance of atomically precise metal NCs for catalytic processes, this review emphasizes 1) the recent work on Cu, Ag, and Au NCs with their synthesis, 2) the parameters affecting the activity and selectivity of NCs catalysis, and 3) the discussion on the catalytic potential of these metal NCs. Additionally, metal NCs will facilitate the design of extremely active and selective catalysts for significant reactions by elucidating catalytic mechanisms at the atomic and molecular levels. Future advancements in the science of catalysis are expected to come from the potential to design NCs catalysts at the atomic level.

Visible-light-driven photocatalytic carboxylation to aromatic carboxylic acids with CO2

(Hetero)aromatic carboxylic acids and their derivatives attract attention due to their role in the synthesis of several biologically active molecules, active pharmaceutical ingredients, polymers, etc. Carbon dioxide (CO2) is a prime C1 source for the synthesis of aromatic carboxylic acids because of its nontoxicity, nonflammability, abundance and renewability. Owing to the thermodynamic and chemical inertness of CO2, traditional carboxylation to aromatic carboxylic acids with CO2 is always performed under harsh reaction conditions or using stoichiometric metallic reductants. Visible-light-driven carboxylation with CO2 provides an environmentally benign, mild, and high-efficiency route for the production of aromatic carboxylic acids. This review comprehensively introduces the visible-light-driven preparation of aromatic carboxylic acids through a visible-light-driven oxidative addition and reductive elimination mechanism, binding of aryl (radical) anions which are produced by photoinduced electron transfer (PET) to CO2, binding of carbon dioxide anion radicals (CO2˙-) which are formed by PET to aryl compounds, radical coupling between CO2˙- and aryl radicals, and other mechanisms. Finally, this review provides a summary and the future work direction. This article offers a theoretical guidance for efficient synthesis of aromatic carboxylic acids via photocatalysis.

Recent Advances on Single-Atom Catalysts for Photocatalytic CO2 Reduction

The present energy crisis and environmental challenges may be efficiently resolved by converting carbon dioxide (CO2 ) into various useful carbon products. The development of more effective catalysts has been the main focus of current research on photocatalytic CO2 reduction. Due to their high atomic efficiency and superior catalytic activity, single-atom catalysts (SACs) have attracted considerable interest in catalytic CO2 conversion. This review discusses the current research developments, obstacles, and potential of SACs for photocatalytic CO2 reduction. And further, discusses the principle of photocatalytic carbon dioxide reduction. This work has compared and analyzed the effects of support materials and active site types in SACs on photocatalytic CO2 reduction performance. This work believes that by sharing these developments, some inspiration for the rational design and development of stable and effective photocatalytic CO2 reduction catalysts based on SACs can be provided.

Utilization of Low-Concentration CO2 with Molecular Catalysts Assisted by CO2-Capturing Ability of Catalysts, Additives, or Reaction Media

Increasing concentration of atmospheric CO₂ is a worldwide concern and continues to trigger various environmental problems. Photo- or electrocatalytic CO₂ reduction (CO₂-Red) using solar energy, i.e., artificial photosynthesis, is a prospective technique owing to its sustainability and the usefulness of the reaction products. Concentrations of CO₂ in exhaust gases from industries are several % to 20%, and that in the atmosphere is about 400 ppm. Although condensation processes of CO₂ require high energy consumption and cost, pure CO₂ has been used in most of the reported studies for photo- and electrocatalytic CO₂-Red because the reaction between CO₂ and the catalyst could be one of the rate-limiting steps. To address these issues and provide a repository of potential techniques for other researchers, this perspective summarizes the catalytic systems reported for the reduction of low-concentration CO₂, which utilize a combination of catalytic CO₂-Red and CO₂-capturing reactions (or CO₂ adsorption). First, we describe CO₂ insertions into M-X bonds of the catalysts, which increase the rate constants and/or equilibrium constants for CO₂ binding on the catalysts, and modifications of the second coordination sphere to stabilize the CO₂-bound catalysts. Furthermore, we discuss the reaction media used for catalytic CO₂-Red that have the unique effect of increasing CO₂ concentrations around the catalysts. These reaction media include typical CO₂-capturing additives, ionic liquids, and metal-organic frameworks.

Toxicity and activity inhibition of metal-organic framework MOF-199 to nitrogen-fixing bacterium Azotobacter vinelandii

Metal-organic framework (MOF) materials with fantastic properties have found important applications in various areas. Learning the lessons from plastics and microplastics, it is urgent to investigate the environmental impacts of emerging materials to avoid potential pollution. However, the environmental toxicity and risks of MOF materials are seldom reported. Herein, we studied the toxicity and activity inhibition of MOF-199 to nitrogen-fixing bacterium Azotobacter vinelandii. MOF-199 significantly suppressed the growth of A. vinelandii and led to cell death at 40 mg/L. MOF-199 penetrated the cell wall and induced the shrinking of bacterial cells. MOF-199 reduced the nitrogen fixation activity of A. vinelandii at 40 mg/L by decreasing the gene nifH levels and inhibiting the Ca²⁺Mg²⁺-ATPase activity, which was further confirmed by the changes in oxidative phosphorylation related genes. Complete growth inhibition and activity loss of A. vinelandii occurred at 60 mg/L of MOF-199. The toxicological mechanism of MOF-199 to A. vinelandii was assigned to the oxidative stress, which occurred at 20 mg/L and higher. Both Cu²⁺ release and particulates themselves contributed to the toxicity of MOF-199 to A. vinelandii. These findings highlighted the environmental hazards and risks of MOF materials to nitrogen-fixing bacteria and nitrogen fixation in the biogeochemical cycle.

Recent progress of silver-containing photocatalysts for water disinfection under visible light irradiation: A review

Photocatalysis has emerged as an environmentally friendly approach for microbial disinfection. The development of visible-light-driven (VLD) photocatalysts for water pollution remediation is imperative, considering that visible light constitutes a substantial fraction of the solar spectrum. The modification of photocatalysts by Ag/AgX (X = Cl, Br, I) deposition can be used to improve photocatalytic efficiencies. This is achieved by preventing photogenerated electron-hole pairs recombination through electron trapping mechanisms. With the introduction of silver NPs, visible light absorption can also be increased through its SPR enhancement. Silver also possesses excellent antimicrobial properties. Consequently, a novel class of Ag/AgX-containing hybrid materials has recently emerged as a promising candidate for water disinfection. This review summarizes the latest advances in the synthesis of Ag/AgX-containing photocatalysts using various synthetic methods. The microbial disinfection efficiencies of the as-prepared materials, the main reactive oxygen species and disinfection mechanisms are also reviewed in detail. Finally, some areas that need to be improved are discussed along with new insights as perspectives for future developments in this field.

Effect of Micropores of a Porous Coordination Polymer on the Product Selectivity in RuII Complex-catalyzed CO2 Reduction

To develop an efficient CO2 reduction catalyst, hybridizing a molecular catalyst and a porous coordination polymer (PCP) is a promising strategy because it can combine both advantages of the precise reactivity control of the former and the CO2 adsorption property of the latter. Although several PCP hybrid catalysts have been reported to date, the CO2 sorption behavior and the CO2 reduction reactivity have been investigated separately, and the CO2 enrichment during the catalysis is still unclear. We report CO2 photoreduction under different temperatures and pressures using a PCP-RuII complex hybrid catalyst. The product selectivity (CO or HCOOH) varied depending on the reaction conditions. The altered selectivity could be interpreted in terms of the CO2 capture in the micropores of a PCP.