Catalytic upgrading of penicillin fermentation residue bio-oil by metal-supported HZSM-5

Pyrolysis of Ca/Fe-rich antibiotic fermentation residues into biochars for efficient phosphate removal/recovery from wastewater: Turning hazardous waste to phosphorous fertilizer

Ca/Fe-rich antibiotic fermentation residues (AFRs), a type of hazardous waste, can be regarded as recyclable biomass and metal resources. However, concurrent detoxification and reutilization of biomass and metals resources from AFRs have never been reported before. In this study, Ca/Fe-rich vancomycin fermentation residues were pyrolyzed into biochar to adsorb phosphate for the first time. The residual vancomycin and antibiotic resistance genes were completely decomposed during pyrolysis. The resultant Ca/Fe-rich biochar exhibited excellent performance at adsorbing phosphate without further modifications. The process had rapid kinetics and a maximum adsorption capacity of 102 mg P/g. Ca and Fe were the active sites, whereas different mechanisms were observed under acidic and alkaline conditions. Surprisingly, HCO₃^- enhanced phosphate adsorption with an increase of adsorption capacity from 43.9 to 71.0 mg/g when HCO₃^- concentration increased from 1 to 10 mM. Furthermore, actual wastewater could be effectively treated by the biochar. The phosphate-rich spent biochar significantly promoted seed germination (germination rate: 96.7 % vs. 80.0 % in control group, p < 0.01) and seedling growth (shoot length was increased by 57.9 %, p < 0.01) due to the slow release of bioavailable phosphate, and thus could be potentially used as a phosphorous fertilizer. Consequently, the hazardous waste was turned into phosphorous fertilizer, with the additional benefits of detoxifying AFRs, reutilizing biomass and metal resources from AFRs, controlling phosphate pollution, and recovering phosphate from wastewater.

Review of research on migration, distribution, biological effects, and analytical methods of microfibers in the environment

Microplastics have been proven to be one of the critical environmental pollution issues. Moreover, microfibers, the most prominent form of microplastics in the environment, have likewise attracted the attention of various countries. With the increase in global population and industrialization, the production and use of fibers continue to increase yearly. As a result, a large number of microfibers are formed. If fiber products are not used or handled correctly, it will cause direct/indirect severe microfiber environmental pollution. Microfibers will be further broken into smaller fiber fragments when they enter the natural environment. Presently, researchers have conducted extensive research in the identification of microfibers, laying the foundation for further resourcefulness research. This work used bibliometric analysis to review the microfiber contamination researches systematically. First, the primary sources of microfibers and the influencing factors are analyzed. We aim to summarize the influence of the clothing fiber preparation and care processes on microfiber formation. Then, this work elaborated on the migration in/between water, atmosphere, and terrestrial environments. We also discussed the effects of microfiber on ecosystems. Finally, microfibers' current and foreseeable effective treatment, disposal, and resource utilization methods were explained. This paper will provide a structured reference for future microfiber research.

Evaluation of Behavior of 13X Zeolite Modified with Transition Metals for Catalytic Applications

This work was intended to develop catalysts based on 13X zeolite modified with transition metals for catalytic applications. In this regard, 13X zeolite was modified by loading of transition metals such as Fe, Co, Cu and various types of catalysts such as Fe-, Co-, Cu-, Fe-Co-, Fe-Cu-, and Co-Cu/13X zeolite were obtained. To prepare these catalysts, the wet impregnation method and metallic precursors were used. The catalysts were characterized by SEM, XRD, BET, and ammonia adsorption. Then the catalytic performance was investigated during upgrading of rapeseed residual biomass pyrolysis vapors using this catalysts and a fixed-bed reactor in two stages. Experimental results showed that the addition of transition metals improved the catalytic selectivity towards aromatic hydrocarbons and Fe-Cu/13X zeolite catalyst was the best and had a high deoxygenation activity (from 62.45% to 20.56%), produced maximum monoaromatic hydrocarbons (of 27.45%), the oxygen content in bio-oil was reduced from 34.98 wt% to 16.06 wt%, the calorific value increased and thus the bio-oil quality was improved.

Catalytic conversion of rape straw into biofuels by direct non-thermal plasma modified HZSM-5

Fresh HZSM-5 catalyst modification experiment was carried out on the direct non-thermal plasma (DNTP) reactor. The aim of this work was to study the effects of modified voltages on the physicochemical properties of HZSM-5 and its enhancement in biomass catalytic pyrolysis. The results showed that DNTP modification was performed at different voltages of 20 kV, 22 kV, 24 kV, compared with fresh HZSM-5, the effect of 22 kV voltage was preferably. H-22 had the largest specific surface area and mesoporous volume, and the total acid content added 17.02%. The biomass catalytic pyrolysis test was used to test the HZSM-5 catalytic activity after modification. The results showed that the catalyst obtained by the catalyst under 22 kV modified voltage had the highest monocyclic aromatic hydrocarbon selectivity of 40.55%.

Characteristics and Evolution of Nitrogen in the Heavy Components of Algae Pyrolysis Bio-Oil

Algae pyrolytic bio-oil contains a large quantity of N-containing components (NCCs), which can be processed as valuable chemicals, while the harmful gases can also be released during bio-oil upgrading. However, the characteristics of NCCs in the bio-oil, especially the composition of heavy NCCs (molecular weight ≥200 Da), have not been fully studied due to the limitation of advanced analytical methods. In this study, three kinds of algae rich in lipids, proteins, and carbohydrates were rapidly pyrolyzed (10-25 °C/s) at different temperatures (300-700 °C). The bio-oil was analyzed using a Fourier transform ion cyclotron resonance mass spectrometer equipped with electrospray ionization, and the characteristics and evolution of nitrogen in heavy components were first obtained. The results indicated that the molecular weight of most heavy NCCs was distributed in the 200-400 Da range. N_1-3 compounds account for over 60% in lipid and protein-rich samples, while N₀ and N₄ components are prominent in carbohydrate-rich samples. As temperature increases, most NCCs become more aromatic and contain less O due to the strong Maillard and deoxygenation reactions. Moreover, the heavier NCCs were promoted to form lighter compounds with more nitrogen atoms through decomposition (mainly denitrogenation and deoxygenation). Finally, some strategies to deal with the NCCs for high-quality bio-oil production were proposed.