Neodymium oxide (Nd2O3) coupled tubular g-C3N4, an efficient dual-function catalyst for photocatalytic hydrogen production and NO removal

Adsorption and bacterial performance of Nd2O3 modified Ag nanoparticles with enhanced degradation of methylene blue

Our study focused on the optical behavior, methylene blue (MB) dye degradation potential, antibacterial performance, and silver and trioxide mineral interaction with different bacterial species. We found that the addition of silver nanoparticles (Ag NPs) to neodymium oxide (Nd2O3) resulted in a significant response, with an enlargement of the inhibition zone for bacterial species such as Staphylococcus aureus and Escherichia coli. Specifically, the inhibition zone for S. aureus increased from 9.3 ± 0.5 mm for pure Nd2O3 to 16.7 ± 0.4 mm for the Ag/Nd2O3 nano-composite, while for E. coli, it increased from 8.8 ± 0.4 mm for Nd2O3 to 15.9 ± 0.3 mm for Ag/Nd2O3. Furthermore, the optical behavior of the composites showed a clear band-gap narrowing with the addition of Ag NPs, resulting in enhanced electronic localization. The direct and indirect transitions reduced from 6.7 to 6.1 eV and from 5.2 to 2.9 eV, respectively. Overall, these results suggest that the Ag/Nd2O3 nano-composite has potential applications in sensor industries and water treatment, thanks to its enhanced optical behavior, antibacterial performance, and efficient MB degradation capabilities. In terms of MB degradation, the Ag/Nd2O3 mixed system exhibited more efficient degradation compared to pure Nd2O3. After 150 min, the MB concentration in the mixed system decreased to almost half of its starting point, while pure Nd2O3 only reached 33%.

Facile synthesis of multi-layer Co(OH)2/CeO2-g-C3N4 ternary synergistic heterostructure for efficient photocatalytic oxidation of NO under visible light

In this work, we report a one-step synthesis of ternary Z-scheme Co(OH)2/CeO2-g-C3N4 (CoCe-CN) heterostructure via hydrothermal method. Owing to the modification of Co(OH)2 and CeO2, the existence of Co(OH)2 as an electron acceptor-donor center between CeO2 and g-C3N4 accelerates the electron transfer and provides extra OH- reaction pathway for photocatalytic oxidation of NO. As a result, 50CoCe-CN (Co and Ce accounting for 25% mass ratio separately) achieved a 53.5% conversion efficiency of NO at 600 ppb concentration, which is 1.82 times that of g-C3N4 under visible light. The results of the DFT analysis and element distribution of cobalt and ceria provide convincing evidence supporting the existence of a novel multi-layer structure in the CoCe-CN photocatalyst. This structure involves the loading of CeO2 and Co(OH)2 on the g-C3N4 surface, and Co(OH)2 as a co-catalyst introduced between CeO2 and g-C3N4 realizes the synergy between CeO2 and Co(OH)2 which further improve the photocatalytic properties. The higher photocatalytic efficiencies observed in the CoCe-CN photocatalysts compared to those containing only cobalt (Co-CN) or ceria (Ce-CN) provide further evidence of the synergistic effect of these two elements. This work demonstrates a more efficient and effective ternary photocatalytic system, with greater practical potential for photocatalytic oxidation of NO.

The lncRNA H19/miR-29a-3p/SNIP1/c-myc regulatory axis is involved in pulmonary fibrosis induced by Nd2O3

Some rare earth elements are occupational and environmental toxicants and can cause organ and systemic damage; therefore, they have attracted global attention. Neodymium oxide (Nd2O3) is a rare earth element that is refined and significantly utilized in China. The long noncoding RNA (lncRNA) H19 is encoded by the H19/IGF2 imprinted gene cluster located on human chromosome 11p15.5. H19 has become a research focus due to its ectopic expression leading to the promotion of fibrosis. However, the mechanisms by which it causes pulmonary fibrosis are elusive. This investigation indicates that biologically active Nd2O3 increases H19, SNIP1, and c-myc, decreases miR-29a-3p, accelerates macrophage M2 polarization, and causes pulmonary fibrosis in mice lung tissues. In macrophage-differentiated THP-1 cells, Nd2O3 (25 μg/ml) enhanced H19, SNIP1, and c-myc, reduced miR-29a-3p, accelerated macrophages M2 polarization, and stimulated fibrogenic cytokine (TGF-β1) secretion. Furthermore, the coculturing of Nd2O3-treated macrophage-differentiated THP-1 cells. And human embryonic lung fibroblast cells activated lung fibroblast, which increases the levels of collagen I, α-SMA, p-Smad2/3, and Smad4, whereas H19 knockdown or miR-29a-3p upregulation in macrophages had opposite effects. Moreover, it was revealed that H19/miR-29a-3p/SNIP1/c-myc regulatory axis is involved in pulmonary fibrosis induced by Nd2O3. Therefore, this study provides new molecular insights into the mechanism of pulmonary fibrosis by Nd2O3.

Preparation of 3D Nd2O3-NiSe-Modified Nitrogen-Doped Carbon and Its Electrocatalytic Oxidation of Methanol and Urea

Developing renewable energy sources and controlling water pollution are critical but challenging problems. Urea oxidation (UOR) and methanol oxidation (MOR), both of which have high research value, have the potential to effectively address wastewater pollution and energy crisis problems. A three-dimensional neodymium-dioxide/nickel-selenide-modified nitrogen-doped carbon nanosheet (Nd₂O₃-NiSe-NC) catalyst is prepared in this study by using mixed freeze-drying, salt-template-assisted technology, and high-temperature pyrolysis. The Nd₂O₃-NiSe-NC electrode showed good catalytic activity for MOR (peak current density ~145.04 mA cm^-2 and low oxidation potential ~1.33 V) and UOR (peak current density ~100.68 mA cm^-2 and low oxidation potential ~1.32 V); the catalyst has excellent MOR and UOR characteristics. The electrochemical reaction activity and the electron transfer rate increased because of selenide and carbon doping. Moreover, the synergistic action of neodymium oxide doping, nickel selenide, and the oxygen vacancy generated at the interface can adjust the electronic structure. The doping of rare-earth-metal oxides can also effectively adjust the electronic density of nickel selenide, allowing it to act as a cocatalyst, thus improving the catalytic activity in the UOR and MOR processes. The optimal UOR and MOR properties are achieved by adjusting the catalyst ratio and carbonization temperature. This experiment presents a straightforward synthetic method for creating a new rare-earth-based composite catalyst.

Rational design of Nd2O3 decorated functionalized carbon nanofiber composite for selective electrochemical detection of carbendazim fungicides in vegetables, water, and soil samples

Abuse of carbendazim (CBZ) leaves excessive pesticide residues on agricultural products, which endangers human health because of the residues' high concentrations. Hence, a composite consisting of functionalized carbon nanofibers (f-CNF) with neodymium oxide (Nd₂O₃) was fabricated to monitor CBZ at trace levels. The Nd₂O₃/f-CNF composite-modified electrode displays higher electro-oxidation ability towards CBZ than Nd₂O₃ and f-CNF-modified electrodes. The combined unique properties of Nd₂O₃ and f-CNF result in a substantial specific surface area, superior structural stability, and excellent electrocatalytic activity of the composite yielding enhanced sensitivity to detecting CBZ with a detection limit of 4.3 nM. Also, the fabricated sensor electrode can detect CBZ in the linear concentration range of up to 243.0 μM with high selectivity, appropriate reproducibility, and stability. A demonstration of the sensing capability of CBZ in vegetables, water, and soil samples was reported paving the way for its use in practical applications.

LncRNA H19 via miR-29a-3p is involved in lung inflammation and pulmonary fibrosis induced by neodymium oxide

The occupational and environmental health safety of rare earths has attracted considerable attention. In China, the rare earth neodymium oxide (Nd₂O₃) is extensively refined and utilized. However, the mechanisms of Nd₂O₃-induced lung injury are elusive. In the present study, we found that exposure of mice to Nd₂O₃ caused an inflammatory reaction and fibrosis in lung tissues, which was in relation to the Nd₂O₃-induced higher levels of the lncRNA H19 (H19), tumor necrosis factor receptor 1 (TNFRSF1A), p-p65, and p-IKKβ and lower levels of miR-29a-3p. Further, in mouse monocyte macrophage leukemia cells (RAW264.7), Nd₂O₃ induced an inflammatory reaction, increases of H19 and TNFRSF1A levels, decreases of miR-29a-3p levels, and activation of the nuclear factor (NF)-κB signaling pathway. Further, we established that miR-29a-3p regulates TNFRSF1A expression. Up-regulation of miR-29a-3p and down-regulation of H19 blocked the Nd₂O₃-induced secretion of TNF-α, MIP-1α, and IL-6; the increases of TNFRSF1A levels; and activation of the NF-κB signaling pathway in RAW264.7 cells. Further, in Nd₂O₃-treated RAW26.4 cells, H19 inhibited the expression of miR-29a-3p, which targets TNFRSF1A, and activated the NF-κB signaling pathway to enhance the expression of TNF-α, MIP-1α, and IL-6. Moreover, for mice, up-regulation of miR-29a-3p reversed lung tissue inflammation, pulmonary fibrosis, and activation of the NF-κB signaling pathway induced by Nd₂O₃. In sum, the present investigation shows that H19 via miR-29a-3p is involved in lung inflammation and pulmonary fibrosis induced by Nd₂O₃, which is a mechanism for the Nd₂O₃-induced lung inflammatory response and pulmonary fibrosis. This information is useful for development of a biomarker of Nd₂O₃-induced lung injury.

N, P, O co-doped carbon filling into carbon nitride microtubes to promote photocatalytic hydrogen production

Carbon nitride (CN) as the photocatalytic hydrogen production catalyst has attracted great attentions but suffering from a poor performance due to the unsatisfied energy band gap and the low separation efficiency of photogenerated carriers. Herein, we create a simple method to construct a novel CN-based photocatalyst, i.e., the N, P, O co-doped carbon filled CN microtube, which presents a narrow band gap, a high separation efficiency of photogenerated carriers, and a good stability. In this novel structure, the tubular morphology of CN ensures a narrow band gap, and the N, P, O co-doped carbon facilitates the transfer of photogenerated electrons. Coupling these two further reduces the energy band gap and improves the separation efficiency. For the photocatalytic hydrogen evolution under the visible light, the optimal sample presents an ultrahigh hydrogen evolution rate of 1149.71 μmol g^-1 h^-1 ranking at the top level, which is 112.60 times that of traditional bulk CN. In addition, it also has a high reusability and good stability after four cycle experiments. This study has provided a new viewpoint to design or develop the high-efficient photocatalysts for hydrogen production.

Direct Z-scheme SiNWs@Co3O4 photocathode with a cocatalyst of sludge-derived carbon quantum dots for efficient photoelectrochemical hydrogen production

Solar driven photoelectrochemical (PEC) hydrogen production has attracted considerable attention, but the design of highly efficient, robust and low-cost photocathode still remains a significant challenge. Herein, we report a novel SiNWs@Co₃O₄Z-scheme heterojunction photocathode with carbon quantum dots eco-friendly derived from sludge (SCQDs) as the co-catalyst. The photocathode not only leads to effective separation of electron-hole pair, lower transmission resistance, and longer lifetime of charge carriers, but also elevates the stability by preventing direct contact between the SiNWs and the electrolyte as well as the self-oxidation. Simultaneously, the excellent electron transport properties of the SCQDs further improved the PEC performance. Correspondingly, a maximum current density of 14.88 mA·cm^-2 was obtained at -0.67 V with the applied bias photon-to-current efficiency (ABPE) achieving 8.4% under visible light irradiations at pH = 7. This work provides a promising scheme for Si-based photocathodes for PEC hydrogen production with a high performance, reliable stability, and low-cost.

Engineering of g-C3N4-based photocatalysts to enhance hydrogen evolution

The technology of photocatalytic hydrogen production that converts abundant yet intermittent solar energy into an environmentally friendly alternative energy source is an attractive strategy to mitigate the energy crisis and environmental pollution. Graphitic carbon nitride (g-C₃N₄), as a promising photocatalyst, has gradually received focus in the field of artificial photosynthesis due to its appealing optical property, high chemical stability and easy synthesis. However, the limited light absorption and massive recombination of photoinduced carriers have hindered the photocatalytic activity of bare g-C₃N₄. Therefore, from the perspective of theoretical calculations and experiments, many valid approaches have been applied to rationally design the photocatalyst and ameliorate the hydrogen production performance, such as element doping, defect engineering, morphology tuning, and semiconductor coupling. This review summarized the latest progress of g-C₃N₄-based photocatalysts from two perspectives, modification of pristine g-C₃N₄ and interfacial engineering design. It is expected to offer feasible suggestions for the fabrication of low-cost and high-efficiency photocatalysts and the photocatalytic mechanism analyses assisted by calculation in the near future. Finally, the prospects and challenges of this exciting research field are discussed.