Enhancement effect of nanoscale zero-valent iron addition on microbial degradation of BDE-209 in contaminated mangrove sediment

Zero-valent iron (ZVI) facilitated in-situ selenium (Se) immobilization and its recovery by magnetic separation: Mechanisms and implications for microbial ecology

Selenium (Se(VI)) is environmentally toxic. One of the most popular reducing agents for Se(VI) remediation is zero-valent iron (ZVI). However, most ZVI studies were carried out in water matrices, and the recovery of reduced Se has not been investigated. A water-sediment system constructed using natural sediment was employed here to study in-situ Se remediation and recovery. A combined effect of ZVI and unacclimated microorganisms from natural sediment was found in Se(VI) removal in the water phase with a removal efficiency of 92.7 ± 1.1% within 7 d when 10 mg L-1 Se(VI) was present. Soluble Se(VI) was removed from the water and precipitated to the sediment phase (74.8 ± 0.1%), which was enhanced by the addition of ZVI (83.3 ± 0.3%). The recovery proportion of the immobilized Se was 34.2 ± 0.1% and 92.5 ± 0.2% through wet and dry magnetic separation with 1 g L-1 ZVI added, respectively. The 16 s rRNA sequencing revealed the variations in the microbial communities in response to ZVI and Se, which the magnetic separation could potentially mitigate in the long term. This study provides a novel technique to achieve in-situ Se remediation and recovery by combining ZVI reduction and magnetic separation.

Modified nano zero-valent iron coupling microorganisms to degrade BDE-209: Degradation pathways and microbial responses

Polybrominated diphenyl ethers (PBDEs) in soil and groundwater have garnered considerable attention owing to the significant bioaccumulation potential and toxicity. Currently, the coupling treatment method of nano zero-valent iron (nZVI) with dehalogenation microorganisms is a research hotspot in the field of PBDE degradation. In this study, various systems were established within anaerobic environments, including the nZVI-only system, microorganism-only system, and the nZVI + microorganisms system. The aim was to investigate the degradation pathway of BDE-209 and elucidate the degradation mechanism within the coupled system. The results indicated that the degradation efficiency of the coupled system was better than that of the nZVI-only or microorganism-only system. Two modified nZVI (carboxymethyl cellulose and polyacrylamide) were prepared to improve the coupling degradation efficiency. CMC-nZVI showed the highest stability, and the coupled system consisting of microorganisms and CMC-nZVI showed the best degradation effect among all of the systems in this study, reaching 89.53% within 30 days. Furthermore, 22 intermediate products were detected in the coupling systems. Notably, changing the inoculation time did not significantly improve the degradation effect. The expression changes of the two reductive dehalogenase genes, e.g. TceA and Vcr, reflected the stress response and self-recovery ability of the dehalogenating bacteria, indicating such genes can be used as biomarker for evaluating the degradation performance of the coupling system. These findings provide a better understanding about the mechanism of coupling debromination process and the direction for the optimization and on-site repair of coupled systems.

A critical review on BDE-209: Source, distribution, influencing factors, toxicity, and degradation

As the most widely used polybrominated diphenyl ether, BDE-209 is commonly used in polymer-based commercial and household products. Due to its unique physicochemical properties, BDE-209 is ubiquitous in a variety of environmental compartments and can be exposed to organisms in various ways and cause toxic effects. The present review outlines the current state of knowledge on the occurrence of BDE-209 in the environment, influencing factors, toxicity, and degradation. BDE-209 has been detected in various environmental matrices including air, soil, water, and sediment. Additionally, environmental factors such as organic matter, total suspended particulate, hydrodynamic, wind, and temperature affecting BDE-209 are specifically discussed. Toxicity studies suggest BDE-209 may cause systemic toxic effects on living organisms, reproductive toxicity, embryo-fetal toxicity, genetic toxicity, endocrine toxicity, neurotoxicity, immunotoxicity, and developmental toxicity, or even be carcinogenic. BDE-209 has toxic effects on organisms mainly through epigenetic regulation and induction of oxidative stress. Evidence regarding the degradation of BDE-209, including biodegradation, photodegradation, Fenton degradation, zero-valent iron degradation, chemical oxidative degradation, and microwave radiation degradation is summarized. This review may contribute to assessing the environmental risks of BDE-209 to help develop rational management plans.

The influence of various microplastics on PBDEs contaminated soil remediation by nZVI and sulfide-nZVI: Impedance, electron-accepting/-donating capacity and aging

The microplastics (MPs) existed in the environment widely has resulted in novel thinking about in-situ remediation techniques, such as nano-zero-valent iron (nZVI) and sulfided nZVI (S-nZVI), which were often compromised by various environmental factors. In this study, three common MPs such as polyvinyl chloride (PVC), polystyrene (PS), and polypropylene (PP) in soil were found to inhibit the degradation rate of decabromodiphenyl ether (BDE209) by nZVI and S-nZVI to different degrees due to MPs inhibiting of electron transfer which is the main way to degrade BDE209. The inhibition strength was related to its impedance (Z) and electron-accepting (EAC)/-donating capacity (EDC). Based on the explanation of the inhibition mechanism, the reason for different aging degrees of nZVI and S-nZVI in different MPs was illustrated, especially in PVC systems. Furthermore, the aging of reacted MPs, functionalization and fragmentation in particular, indicated that they were involved in the degradation process. Moreover, this work provided new insights into the field application of nZVI-based materials for removing persistent organic pollutants (POPs).

Functional materials contributing to the removal of chlorinated hydrocarbons from soil and groundwater: Classification and intrinsic chemical-biological removal mechanisms

Chlorinated hydrocarbons (CHs) are the main contaminants in soil and groundwater and have posed great challenge on the remediation of soil and ground water. Different remediation materials have been developed to deal with the environmental problems caused by CHs. Remediation materials can be classified into three main categories according to the corresponding technologies: adsorption materials, chemical reduction materials and bioaugmentation materials. In this paper, the classification and preparation of the three materials are briefly described in terms of synthesis and properties according to the different types. Then, a detailed review of the remediation mechanisms and applications of the different materials in soil and groundwater remediation is presented in relation to the various properties of the materials and the different challenges encountered in laboratory research or in the environmental application. The removal trends in different environments were found to be largely similar, which means that composite materials tend to be more effective in removing CHs in actual remediation. For instance, adsorbents were found to be effective when combined with other materials, due to the ability to take advantage of the respective strengths of both materials. The rapid removal of CHs while minimizing the impact of CHs on another material and the material itself on the environment. Finally, suggestions for the next research directions are given in conjunction with this paper.