Enhanced nitrogen removal in an electrochemically coupled biochar-amended constructed wetland microcosms: The interactive effects of biochar and electrochemistry

Ciprofloxacin affects nutrient removal in manganese ore-based constructed wetlands: Adaptive responses of macrophytes and microbes

Ciprofloxacin (CIP) has received considerable attention in recent decades due to its high ecological risk. However, little is known about the potential response of macrophytes and microbes to varying levels of CIP exposure in constructed wetlands. Therefore, lab-scale manganese ore-based tidal flow constructed wetlands (MO-TFCWs) were operated to evaluate the responses of macrophytes and microbes to CIP over the long term. The results indicated that total nitrogen removal improved from 79.93% to 87.06% as CIP rose from 0 to 4 mg L-1. The chlorophyll content and antioxidant enzyme activities in macrophytes were enhanced under CIP exposure, but plant growth was not inhibited. Importantly, CIP exposure caused a marked evolution of the substrate microbial community, with increased microbial diversity, expanded niche breadth and enhanced cooperation among the top 50 genera, compared to the control (no CIP). Co-occurrence network also indicated that microorganisms may be more inclined to co-operate than compete. The abundance of the keystone bacterium (involved in nitrogen transformation) norank_f__A0839 increased from 0.746% to 3.405%. The null model revealed drift processes (83.33%) dominated the community assembly with no CIP and 4 mg L-1 CIP. Functional predictions indicated that microbial carbon metabolism, electron transfer and ATP metabolism activities were enhanced under prolonged CIP exposure, which may contribute to nitrogen removal. This study provides valuable insights that will help achieve stable nitrogen removal from wastewater containing antibiotic in MO-TFCWs.

Reveling the micromolecular biological mechanism of acetate, thiosulfate and Fe0 in ecological floating beds for treating low C/N wastewater: Insight into nitrogen removals and greenhouse gases reductions

Selecting an appropriate electron donor to enhance nitrogen removal for treating low C/N wastewater in ecological floating beds (EFBs) is controversy. In this study, a systematic and comprehensive evaluation of sodium acetate (EFB-C), sodium thiosulfate (EFB-S) and iron scraps (EFB-Fe) was performed in a 2-year experiment on long-term viability including nitrogen removal and greenhouse gas emissions associated with key molecular biological mechanisms. The results showed that EFB-C (43-85 %) and EFB-S (40-88 %) exhibited superior total nitrogen (TN) removal. Temperature and hydraulic retention time (HRT) have significant impacts on TN removal of EFB-Fe, however, it could reach 86 % under high temperature (30-35 °C) and a long HRT (3 days), and it has lowest N2O (0-6.2 mg m-2 d-1) and CH4 (0-5.3 mg m-2 d-1) fluxes. Microbial network analysis revealed that the microbes changed from competing to cooperating after adding electron donors. A higher abundance of anammox genera was enriched in EFB-Fe. The Mantel's test and structural equation model provided proof of the differences, which showed that acetate and thiosulfate were similar, whereas Fe0 was different in the nitrogen removal mechanism. Molecular biology analyses further verified that heterotrophic, autotrophic, and mixotrophic coupled with anammox were the main TN removal pathways for EFB-C, EFB-S, and EFB-Fe, respectively. These findings provide a better understanding of the biological mechanisms for selecting appropriate electron donors for treating low C/N wastewater.

New insights into substrates shaped nutrients removal, species interactions and community assembly mechanisms in tidal flow constructed wetlands treating low carbon-to-nitrogen rural wastewater

A limited understanding of microbial interactions and community assembly mechanisms in constructed wetlands (CWs), particularly with different substrates, has hampered the establishment of ecological connections between micro-level interactions and macro-level wetland performance. In this study, CWs with distinct substrates (zeolite, CW_A; manganese ore, CW_B) were constructed to investigate the nutrient removal efficiency, microbial interactions, metabolic mechanisms, and ecological assembly for treating rural sewage with a low carbon-to-nitrogen ratio. CW_B showed higher removal of ammonia nitrogen and total nitrogen by about 1.75-6.75 % and 3.42-5.18 %, respectively, compared to CW_A. Candidatus_Competibacter (denitrifying glycogen-accumulating bacteria) was the dominant microbial genus in CW_A, whereas unclassified_f_Blastocatellaceae (involved in carbon and nitrogen transformation) dominated in CW_B. The null model revealed that stochastic processes (drift) dominated community assembly in both CWs; however, deterministic selection accounted for a higher proportion in CW_B. Compared to those in CW_A, the interactions between microbes in CW_B were more complex, with more key microbes involved in carbon, nitrogen, and phosphorus conversion; the synergistic cooperation of functional bacteria facilitated simultaneous nitrification-denitrification. Manganese ores favour biofilm formation, increase the activity of the electron transport system, and enhance ammonia oxidation and nitrate reduction. These results elucidated the ecological patterns exhibited by microbes under different substrate conditions thereby contributing to our understanding of how substrates shape distinct microcosms in CW systems. This study provides valuable insights for guiding the future construction and management of CWs.

Advancing towards electro-bioremediation scaling-up: On-site pilot plant for successful nitrate-contaminated groundwater treatment

The potential of nitrate electro-bioremediation has been fully demonstrated at the laboratory scale, although it has not yet been fully implemented due to the challenges associated with scaling-up bioelectrochemical reactors and their on-site operation. This study describes the initial start-up and subsequent stable operation of an electro-bioremediation pilot plant for the treatment of nitrate-contaminated groundwater on-site (Navata site, Spain). The pilot plant was operated under continuous flow mode for 3 months, producing an effluent suitable for drinking water in terms of nitrates and nitrites (<50 mg NO3- L-1; 0 mg NO2- L-1). A maximum nitrate removal rate of 0.9 ± 0.1 kg NO3- m-3 d-1 (efficiency 82 ± 18 %) was achieved at a cathodic hydraulic retention time (HRTcat) of 2.0 h with a competitive energy consumption of 4.3 ± 0.4 kWh kg-1 NO3-. Under these conditions, the techno-economic analysis estimated an operational cost of 0.40 € m-3. Simultaneously, microbiological analyses revealed structural heterogeneity in the reactor, with denitrification functionality concentrated predominantly from the centre to the upper section of the reactor. The most abundant groups were Pseudomonadaceae, Rhizobiaceae, Gallionellaceae, and Xanthomonadaceae. In conclusion, this pilot plant represents a significant advancement in implementing this technology on a larger scale, validating its effectiveness in terms of nitrate removal and cost-effectiveness. Moreover, the results validate the electro-bioremediation in a real environment and encourage further investigation of its potential as a water treatment.

Enhanced ammonia removal in tidal flow constructed wetland by incorporating steel slag: Performance, microbial community, and heavy metal release

Utilizing alkaline solid wastes, such as steel slag, as substrates in tidal flow constructed wetlands (TFCWs) can effectively neutralize the acidity generated by nitrification. However, the impacts of steel slag on microbial communities and the potential risk of heavy metal release remain poorly understood. To address these knowledge gaps, this study compared the performance and microbial community structure of TFCWs filled with a mixture of steel slag and zeolite (TFCW-S) to those filled with zeolite alone (TFCW-Z). TFCW-S exhibited a much higher NH4+-N removal efficiency (98.35 %) than TFCW-Z (55.26 %). Additionally, TFCW-S also achieved better TN and TP removal. The steel slag addition helped maintain the TFCW-S effluent pH at around 7.5, while the TFCW-Z effluent pH varied from 3.74 to 6.25. The nitrification and denitrification intensities in TFCW-S substrates were significantly higher than those in TFCW-Z, consistent with the observed removal performance. Moreover, steel slag did not cause excessive heavy metal release, as the effluent concentrations were below the standard limits. Microbial community analysis revealed that ammonia-oxidizing bacteria, ammonia-oxidizing archaea, and complete ammonia-oxidizing bacteria coexisted in both TFCWs, albeit with different compositions. Furthermore, the enrichment of heterotrophic nitrification-aerobic denitrification bacteria in TFCW-S likely contributed to the high NH4+-N removal. In summary, these findings demonstrate that the combined use of steel slag and zeolite in TFCWs creates favorable pH conditions for ammonia-oxidizing microorganisms, leading to efficient ammonia removal in an environmentally friendly manner.

Ex-situ electrochemical characterisation of fixed-bed denitrification biocathodes: A promising strategy to improve bioelectrochemical denitrification

The worldwide issue of nitrate-contaminated groundwater requires practical solutions, and electro-bioremediation offers a promising and sustainable treatment. While it has shown potential benefits, there is room for improvement in treatment rates, which is crucial for its further and effective implementation. In this field, electrochemical characterisation is a valuable tool for providing the foundation for optimising bioelectrochemical reactors, but applying it in fixed-bed reactors is challenging due to its high intrinsic electrical resistance. To overcome these challenges, this study employed the easy and swift eClamp methodology to screen different process parameters and their influence on the performance of fixed-bed denitrifying biocathodes composed of granular graphite. Granules were extracted and studied ex-situ under controlled conditions while varying key operational parameters (such as pH, temperature, and nitrate concentration). In the studied biocathode, the extracellular electron transfer associated with denitrification was identified as the primary limiting step with a formal potential of -0.225 ± 0.007 V vs. Ag/AgCl sat. KCl at pH 7 and 25 °C. By varying the nitrate concentration, it was revealed that the biocathode exhibits a strong affinity for nitrate (KMapp of 0.7 ± 0.2 mg N-NO3- L-1). The maximum denitrification rate was observed at a pH of 6 and a temperature of 35 °C. Furthermore, the findings highlight a 2e-/1H+ transfer, which holds considerable implications for the energy metabolism of bioelectrochemical denitrifiers. These compiled results provide valuable insights into the understanding of denitrifying biocathodes and enable the improvement and prediction of their performance.

Dynamic simulation analysis of city tail water treatment by constructed wetland with biochar substrate

Constructed wetland (CW) is an important method of ecological water treatment, and CW has obvious advantage in treating low-pollution water. In order to improve the treatment efficiency of CW, the first-order and second-order kinetics simulations of pollutant removal in CW were carried out to optimize operating conditions. The experimental study of city tail water treatment under unmodified biochar (different additions) or different modified biochar conditions showed that the first-order kinetic equation relatively accurately reflect the removal of pollutants by substrate. The relatively optimal range of biochar addition (2.21-3.79%) in the first-order kinetic analysis covered the relatively optimal mass ratio (2.95%). The first-order kinetic equation fitting showed that the half-life of ammonia nitrogen removal by NaOH (0.1 mol·L-1)-modified biochar was reduced by about 10% without plant. The half-life of total phosphorus removal by KMnO4 (0.1 mol·L-1) modified biochar was reduced by about 50%. The half-life of chemical oxygen demand removal by H2SO4 (0.75 mol·L-1) + 8 freeze-thaw cycles modified biochar was reduced by about 9.0%. When the half-life was small, the pollutant removal rate was high. The results of this study further confirmed the effectiveness of the simulation results of pollutant removal in CW with biochar by the first-order kinetic equation. This study further optimized the CW operating conditions and improved the treatment efficiency of nitrogen and phosphorus in the CW.

Acorus calamus recycled as an additional carbon source in a microbial fuel cell-constructed wetland for enhanced nitrogen removal

Acorus calamus was recycled as an additional carbon source in microbial fuel cell-constructed wetlands (MFC-CWs), for efficient nitrogen removal of low carbon wastewater. The pretreatment methods, adding positions, and nitrogen transformations were investigated. Results indicated that alkali-pretreatment cleaved the benzene rings in dominant released organics, producing chemical oxygen demand of 164.5 mg from per gram of A. calamus. Pretreated biomass addition in the anode of MFC-CW attained the maximum total nitrogen removal of 97.6% and power generation of 12.5 mW/m², which were higher than those with biomass in the cathode (97.6% and 1.6 mW/m², respectively). However, the duration of a cycle with biomass in the cathode (20-25 days) was longer than that in the anode (10-15 days). Microbial metabolisms related to organics degradation, nitrification, denitrification, and anammox were intensified after biomass recycling. This study provides a promising method to improve nitrogen removal and energy recovery in MFC-CWs.

Performance and mechanism of sacrificed iron anode coupled with constructed wetlands (E-Fe) for simultaneous nitrogen and phosphorus removal

Three anodic biofilm electrode coupled CWs (BECWs) with graphite (E-C), aluminum (E-Al), and iron (E-Fe), respectively, and a control system (CK) were constructed to evaluate the removal performance of N and P in the secondary effluent of wastewater treatment plants (WWTPs) under different hydraulic retention time (HRT), electrified time (ET), and current density (CD). Microbial communities, and different P speciation, were analyzed to reveal the potential removal pathways and mechanism of N and P in BECWs. Results showed that the optimal average TN and TP removal rates of CK (34.10% and 55.66%), E-C (66.77% and 71.33%), E-Al (63.46% and 84.93%), and E-Fe (74.93% and 91.22%) were obtained under the optimum conditions (HRT 10 h, ET 4 h, CD 0.13 mA/cm²), which demonstrated that the biofilm electrode could significantly improve N and P removal. Microbial community analysis showed that E-Fe owned the highest abundance of chemotrophic Fe(II) (Dechloromonas) and hydrogen autotrophic denitrifying bacteria (Hydrogenophaga). N was mainly removed by hydrogen and iron autotrophic denitrification in E-Fe. Moreover, the highest TP removal rate of E-Fe was attributed to the iron ion formed on the anode, causing co-precipitation of Fe(II) or Fe(III) with PO₄^3--P. The Fe released from the anode acted as carriers for electron transport and accelerated the efficiency of biological and chemical reactions to enhance the simultaneous removal of N and P. Thus, BECWs provide a new perspective for the treatment of the secondary effluent from WWTPs.

Insights into the enhanced effect of biochar on cadmium removal in vertical flow constructed wetlands

Biochar has been increasingly applied in constructed wetlands (CWs) to remediate heavy metal (HM)-polluted water. Nevertheless, only few studies have elucidated the enhanced mechanism and potential synergies related to the HM removal from biochar-based CWs (BC-CWs) for HMs removal. This study used cadmium (Cd) as the target HM and added biochar into CWs to monitor physicochemical parameters, plant' physiological responses, substrate accumulation, and microbial metabolites and taxa. In comparison with the biochar-free CW (as CWC), a maximum Cd²⁺ removal of 99.7% was achieved in the BC-CWs, associated with stable physicochemical parameters. Biochar preferentially adsorbed the available Cd²⁺ and significantly accumulated Fe/Mn oxides-bond and the exchangeable Cd fraction. Moreover, biochar alleviated the lipid peroxidation (decreased by 36.4%) of plants, resulting in improved growth. In addition, extracellular polymeric substances were increased by 376.9-396.8 mg/L in BC-CWs than compared to CWC, and N and C cycling was enhanced through interspecific positive connectivity. In summary, this study explored comprehensively the performance and mechanism of BC-CWs in the treatment of Cd²⁺-polluted water, suggesting a promising approach to promote the plant-microbe-substrate synergies under HM toxicity.

A novel cross-flow honeycomb bionic carrier promotes simultaneous nitrification, denitrification and phosphorus removal in IFAS system: Performance, mechanism and keystone species

Simultaneously achieving efficient nitrogen (N) and phosphorus (P) removal without adding external carbon source is vital for carbon-neutral wastewater treatment. In this study, a novel cross-flow honeycomb bionic microbial carrier (CF) was developed to improve the efficiency of simultaneous nitrification, denitrification, and P removal (SNDPR) in an integrated fixed-film activated sludge (IFAS) system. A parallel laboratory-scale sequencing batch reactor with the commercialized microbial carriers (CM) (CM-IFAS) was performed as the comparative system for over 233 d The results demonstrated that CF-IFAS exhibited a more consistent N removal efficiency and better performance than CM-IFAS. In the CF-IFAS, the highest N and P removal efficiencies were 95.40% and 100%, respectively. Typical cycle analysis revealed that nitrate was primarily removed by the denitrifying glycogen-accumulating organisms in the CF-IFAS and by denitrifying phosphate-accumulating organisms in the CM-IFAS. The neutral community model showed that the microbial community assembly in both the reactors was driven by deterministic selection rather than stochastic factors. Compared to those in CM-IFAS, the microorganisms in CF-IFAS were more closely related to each other and had more keystone species: norank_f_norank_o_norank_c_OM190, SM1A02, Defluviicoccus, norank_f_ Saprospiraceae, and norank_f_Rhodocyclaceae. The absolute contents of the genes associated with N removal (bacterial amoA, archaeal amoA, NarG, NapA, NirS, and NirK) were higher in CF-IFAS than in CM-IFAS; the N cycle activity was also stronger in the CF-IFAS. Overall, the microecological environment differed between both systems. This study provides novel insights into the potential of bionic carriers to improve SNDPR performance by shaping microbial communities, thereby providing scientific guidance for practical engineering.

Physicochemical modification of corn straw biochar to improve performance and its application of constructed wetland substrate to treat city tail water

Corn straw is rich in resources, and the preparation of biochar as the constructed wetland (CW) substrate is an effective measure to realize high-value resource utilization. The objective of this paper was to improve the treatment effect of CW on city tail water, the freeze-thaw cycles (FTCs) modification and chemical modification (KMnO₄, NaOH and H₂SO₄) of straw biochar and the utilization of modified straw biochar in CW were studied. The modification characteristics of straw biochar were discussed through scanning electron microscope, element determination, pore structure determination, X-ray diffraction analysis, Fourier transform infrared reflection analysis, CO₂ adsorption and desorption experiment and application experiment of CW (no plants and plants). The results show that under the influence of strong oxidation of KMnO₄, the combination of KMnO₄ and FTCs modification is easy to cause the destruction of biochar structure, and the content of carbon element is reduced. Except for the combined modification of NaOH and FTCs, other composite modifications have little effect on the crystal structure and functional groups of straw biochar. The adsorption capacity of CO₂ by FTCs modified biochar increased by 20.4%, and the adsorption capacity of CO₂ by H₂SO₄ and FTCs composite modified biochar increased by 23.0%. The effect of H₂SO₄ modification of straw biochar based on FTCs modification is obviously better than that of NaOH and KMnO₄. The research results are of great significance to improve the material structure of biochar and the purification effect of CW on city tail water.

Enhanced wastewater nutrients removal in vertical subsurface flow constructed wetland: Effect of biochar addition and tidal flow operation

Dissolved oxygen (DO) and carbon stock in substrate medium play a vital role in the nutrient removal mechanism in a constructed wetland (CW). This study compiles the results of dynamics of DO, ammonium N (NH₄⁺-N), nitrate (NO₃-N), sulfate (SO₄^-2), phosphate (PO₄^-3), chemical oxygen demand (COD), in three setups of vertical-flow constructed wetlands (TFCWs) (SB: substrate + biochar; SBP: substrate + biochar + Colocasia esculenta plantation; SP: substrate + Colocasia esculenta (SP), operated with tidal flow cycles. Experimental analyses illustrated the continuous high DO level (2.743-5.66 mg L^-1) in SB and SBP after the I and II cycle of tidal flow (72 h flooding and 24 h dry phase). COD reduction efficiencies increased from 15.75 - 61.86% to 48.55-96.80% after tidal operation among operating TFCWs. N (NH₄⁺-N) and N (NO₃-N) removal were found to be 88.16%, and 76.02%; 49.32, and 57.85%; and 40.23%, and 48.94 % in SBP, SP and SB, respectively. The theory of improved nitrification and adsorption through biochar amended substratum was proposed for TFCW systems. PO₄^-3 and SO₄^-2 removal improved from 22.63 to 80.50%, and 19.69 to 75.20%, respectively after first tidal operation in all TFCWs. The microbial inhabitation on porous biochar could promote the transformation of available P into microbial biomass and also helped by the plant uptake process while SO₄^-2 reduction in TFCWs could be mainly due to sulfate-reducing bacterial activity and nitrate reduction process, mainly facilitated by high DO and biochar addition in such setups. The study suggests that effluent re-circulation through tidal operation and biochar supplementation in the substratum could be an effective mechanism for the improvement of the working efficiencies of CWs operated with low energy input systems.