Enhanced bioremediation of 2,3',4,4',5-pentachlorodiphenyl by consortium GYB1 immobilized on sodium alginate-biochar

Immobilization of Peniophora incarnata F1 in PVA-SA-biochar matrix and its degradation performance and mechanism for erythromycin degradation

Erythromycin is becoming one of the most common contaminants detected in surface water and wastewater, which poses a potential risk to ecological systems and human health. Until now, there is still no effective way to eliminate it. Herein, a novel and efficient erythromycin-degrading fungus Peniophora incarnata F1, capable of utilizing erythromycin as its sole source of carbon and energy, was isolated from contaminated sludge. Moreover, a fungal immobilization system was developed using polyvinyl alcohol (PVA), sodium alginate (SA) and rape straw biochar (RB) to enhance the removal ability of erythromycin. Under optimal conditions of 30 °C and pH 6.0, the removal rate of erythromycin with PVA-SA-RB@F1 within 5 d reached 89.90%, which is 31.43% higher than that of free strain F1 (58.47%). Furthermore, eight biodegradation products of erythromycin were identified, and five compounds were firstly reported. Based on these metabolites, we inferred erythromycin was transformed to simple products mainly by dehydration, desugar, dehydrogenation, ester bond hydrolysis and carbon chain cleavage reactions. Finally, PVA-SA-RB@F1 were applied to wastewater contained 10 mg/L and 50 mg/L erythromycin, with the removal rates of 100% and 64.97%, respectively. These results show that PVA-SA-RB@F1 can be used as an effective tool to remove erythromycin in water environment. Therefore, this study provides a feasible strategy for bioremediation of erythromycin polluted environment.

Enhancing nitrogen removal in low C/N wastewater with recycled sludge-derived biochar: A sustainable solution

Denitrification is an important biological process in wastewater treatment plants (WWTPs). However, a low carbon-to-nitrogen (C/N) ratio limits the availability of organic carbon, potentially reducing denitrification efficiency. This study investigates the impact of sludge-derived biochar on the nitrogen removal of activated sludge for low C/N ratio municipal wastewater. Sludge-based biochar was characterized by its physicochemical properties, revealing that biochar prepared at 400 °C exhibited the highest specific surface area and the most favorable surface functional groups for electron transfer. The results from batch tests showed that adding 4 g/L of biochar dosage enhanced denitrification rates and total nitrogen (TN) removal efficiency the most. Sequencing batch reactors (SBRs) experiments further confirmed that biochar dosgae improved the removal efficiencies of COD, NH4+-N, and TN, achieving stable values of 97.2 ± 1.2 %, 99.2 ± 0.6 %, and 83.8 ± 2.4 %, respectively. Metabolic and electrochemical analyses revealed that biochar addition enhanced the activity of denitrification enzymes, increasing the ammonia oxidation rate by 12.9 ± 0.7 %, nitrite oxidation rate by 14.7 ± 1.2 %, nitrate reduction rate by 36.9 ± 1.5 %, and nitrite reduction rate by 16.4 ± 0.8 %. The relative abundance of denitrification functional genes (amoA, nirS, nirK, narG, nosZ) increased, and the activities of the corresponding enzymes (AMO, NXR, NAP, NIR) rose by 23±6 %, 53±5 %, 260±15 %, and 55±7 %, respectively. This increase in enzyme activity suggested enhanced denitrification processes, which was further supported by the 60.1 ± 3.7 % increase in electron transfer system activity (ETSA), indicating that biochar acted as an electron shuttle. This study proposes a potential sustainable approach for sludge recycling and enhanced wastewater nitrogen removal under low C/N conditions.

Synergistic sodium alginate- and biochar-immobilized cells for enhancing fermentative hydrogen production from food waste

An immobilized hydrogen-producing consortium investigated biohydrogen production from food waste using a combination of sodium alginate and cassava rhizome biochar. We investigated the effect of varying the biochar concentration from 0 to 3% and the size of immobilized cells from 1 to 7 mm. Immobilized cells were prepared using 50% (v/v) enriched hydrogen-producing consortium, 2% (w/v) sodium alginate, and 0 to 3% (w/v) cassava rhizome biochar. The optimal conditions for achieving the highest hydrogen production in the batch fermentation reactor were identified as a biochar concentration of 2% (w/v) and an immobilized cell size of 2 mm. The highest hydrogen yield, maximum hydrogen production rate, and lag time recorded were 0.69 mmol H2/g-COD, 0.02 mmol H2/g-COD.h, and 41.51 h, respectively. This research highlights the potential of cassava biochar technology for efficient biohydrogen production from food waste, contributing to renewable energy generation and sustainable waste management.

Eliminating hazardous pollutants: treatment options for dioxins and surfactants from water and wastewater: an updated review

Surfactants and dioxins are increasingly being released into the environment due to their excessive usage and their improper disposal. These pollutants cause considerable harm to both humans and the natural environment. Therefore, their removal from water and wastewater, which form major pathways for their transmission, is necessary. Considerable research efforts have been devoted to finding a suitable method for the complete removal of these pollutants. The treatment options for both surfactants and dioxins could be similar but differ in terms of removal efficiencies for each. For example, surfactant removal through coagulation resulted in almost 68%, while for dioxins it attained 98% efficiency. Another method tested for the removal of surfactants is nanobubbling which recorded a 99% removal efficiency, while it was found to be inapplicable for the removal of dioxins due to the difference in the structure of the two products. Worth noting is that among the studied removal methods, biochar-based adsorption stands as one of the most promising techniques in terms of removal efficiency, cost, and sustainability covering the two pollutants. This review deals with the sources and impacts of these pollutants and discusses the recent developments in treatment methods, as compared to already-existing methods, for their elimination from water and wastewater, with the objective of highlighting the most sustainable methods for field application.

Biochar supported Pseudomonas putida based globules for effective removal of Bisphenol A with a practical approach

The widespread and inevitable use of plastic has led to prospective ecological problems through Bisphenol A (BPA), a synthetic chemical in plastic manufacturing. The present study addresses a unique methodology for eliminating BPA using the assistance of Pseudomonas putida. In the present work, biomass was torrefied to generate biochar with highly porous networks that could accommodate the bacterial species for effective colonization and multiplication. The designed biochar-bacterial globules demonstrated the ability to effectively remove BPA (96.88%) at a concentration of up to 2 g/L. The biochar-bacterial globules could effectively adsorb BPA at a low concentration of 20 mg/L. The alteration in pH did not impact the globule's performance, providing additional support for the practical utilization of these globules in polluted water bodies. In addition, the biochar-bacterial globules exhibited superior effectiveness in degradation compared to the standard levels, particularly in saline conditions. The simplicity and effectiveness of the approach make it promising for real-world implementation in addressing ecological problems associated with BPA contamination.

Enhanced degradation of phthalate esters (PAEs) by biochar-sodium alginate immobilised Rhodococcus sp. KLW-1

In this study, a new strain of bacteria, named Rhodococcus sp. KLW-1, was isolated from farmland soil contaminated by plastic mulch for more than 30 years. To improve the application performance of free bacteria and find more ways to use waste biochar, KLW-1 was immobilised on waste biochar by sodium alginate embedding method to prepare immobilised pellet. Response Surface Method (RSM) predicted that under optimal conditions (3% sodium alginate, 2% biochar and 4% CaCl2), di (2-ethylhexyl) phthalate (DEHP) degradation efficiency of 90.48% can be achieved. Under the adverse environmental conditions of pH 5 and 9, immobilisation increased the degradation efficiency of 100 mg/L DEHP by 16.42% and 11.48% respectively, and under the high-stress condition of 500 mg/L DEHP concentration, immobilisation increased the degradation efficiency from 71.52% to 91.56%, making the immobilised pellets have strong stability and impact load resistance to environmental stress. In addition, immobilisation also enhanced the degradation efficiency of several phthalate esters (PAEs) widely existing in the environment. After four cycles of utilisation, the immobilised particles maintained stable degradation efficiency for different PAEs. Therefore, immobilised pellets have great application potential for the remediation of the actual environment.

Integrated transcriptomics and metabolomics analyses reveal the aerobic biodegradation and molecular mechanisms of 2,3',4,4',5-pentachlorodiphenyl (PCB 118) in Methylorubrum sp. ZY-1

2,3',4,4',5-pentachlorodiphenyl (PCB 118), a highly representative PCB congener, has been frequently detected in various environments, garnering much attention across the scientific community. The degradation of highly chlorinated PCBs by aerobic microorganisms is challenging due to their hydrophobicity and persistence. Herein, the biodegradation and adaptation mechanisms of Methylorubrum sp. ZY-1 to PCB 118 were comprehensively investigated using an integrative approach that combined degradation performance, product identification, metabolomic and transcriptomic analyses. The results indicated that the highest degradation efficiency of 0.5 mg L-1 PCB 118 reached 75.66% after seven days of inoculation when the bacteria dosage was 1.0 g L-1 at pH 7.0. A total of eleven products were identified during the degradation process, including low chlorinated PCBs, hydroxylated PCBs, and ring-opening products, suggesting that strain ZY-1 degraded PCB 118 through dechlorination, hydroxylation, and ring-opening pathways. Metabolomic analysis demonstrated that the energy supply and redox metabolism of strain ZY-1 was disturbed with exposure to PCB 118. To counteract this environmental stress, strain ZY-1 adjusted both the fatty acid synthesis and purine metabolism. The analysis of transcriptomics disclosed that multiple intracellular and extracellular oxidoreductases (e.g., monooxygenase, alpha/beta hydrolase and cytochrome P450) participated in the degradation of PCB 118. Besides, active efflux of PCB 118 and its degradation intermediates mediated by multiple transporters (e.g., MFS transporter and ABC transporter ATP-binding protein) might enhance bacterial resistance against these substances. These discoveries provided the inaugural insights into the biotransformation of strain ZY-1 to PCB 118 stress, illustrating its potential in the remediation of contaminated environments.

A novel alginate-embedded magnetic biochar-anoxygenic photosynthetic bacteria composite microspheres for multipollutant removal: Mechanisms of photo-bioelectrochemical enhancement and excellent reusability performance

Existing wastewater treatment technologies face the key challenge of simultaneously removing emerging contaminants and nutrients from wastewater efficiently, with a simplified technological process and minimized operational costs. In this study, a novel alginate-embedded magnetic biochar-anoxygenic photosynthetic bacteria composite microspheres (CA-MBC-PSB microspheres) was prepared for efficient, cost-effective and one-step removal of antibiotics and NH4+-N from wastewater. Our results demonstrated that the CA-MBC-PSB microspheres removed 97.23% of sulfadiazine (SDZ) within 7 h and 91% of NH4+-N within 12 h, which were 21.23% and 38% higher than those achieved by pure calcium alginate-Rhodopseudomonas palustris microspheres (53% and 45.7%), respectively. The enhanced SDZ and NH4+-N removal were attributed to the enhanced photoheterotrophic metabolism and excretion of extracellular photosensitive active substances from R. Palustris through the photo-bioelectrochemical interaction between R. Palustris and magnetic biochar. The long-term pollutants removal performance of the CA-MBC-PSB microspheres was not deteriorated but continuously improved with increasing ruse cycles with a simultaneous removal efficiency of 99% for SDZ and 92% for NH4+-N after three cycles. The excellent stability and reusability were due to the fact that calcium alginate acts as an encapsulating agent preventing the loss and contamination of R. palustris biomass. The CA-MBC-PSB microspheres also exhibited excellent performance for simultaneous removal of SDZ (89% in 7 h) and NH4+-N (90.7% in 12 h) from the secondary effluent of wastewater treatment plant, indicating the stable and efficient performance of CA-MBC-PSB microspheres in practical wastewater treatment.

Biochar mediated high-rate anaerobic bioreactors: A critical review on high-strength wastewater treatment and management

Treatment of high-strength wastewater is critical for the aquatic environment and receiving water bodies around the globe. Untreated or partially treated high-strength wastewater may cause severe damage to the existing water bodies. Various high-rate anaerobic bioreactors have been developed in the last decades for treating high-strength wastewater. High-rate anaerobic bioreactors are effective in treating industrial wastewater and provide energy in the form of methane as well. However, the physical or chemical properties of high-strength industrial wastewater, sometimes, disrupt the functioning of a high-rate anaerobic bioreactor. For example, the disintegration of granular sludge in up flow anaerobic sludge blanket reactor or membrane blocking in an anaerobic membrane bioreactor are the results of a high-strength wastewater treatment which hamper the proper functioning and may harm the wastewater treatment plant economically. Biochar, if added to these bioreactors, may help to alleviate the ill-functioning of high-rate anaerobic bioreactors. The primary mechanisms by biochar work in these bioreactors are direct interspecies electron transfer, microbial immobilization, or gene level alternations in microbial structure. The present article explores and reviews the recent application of biochar in a high-rate anaerobic bioreactor treating high-strength industrial wastewater.

Unveiling the PCB biodegradation potential and stress survival strategies of resuscitated strain Pseudomonas sp. HR1

The exploration of resuscitated strains, facilitated by the resuscitation promoting factor (Rpf), has substantially expanded the pool of cultivated degraders, enhancing the screening of bio-inoculants for bioremediation applications. However, it remains unknown whether these resuscitated strains can re-enter the viable but non-culturable (VBNC) state and the specific stress conditions that trigger such a transition. In this work, the whole genome, and polychlorinated biphenyl (PCB)-degrading capabilities of a resuscitated strain HR1, were investigated. Notably, the focus of this exploration was on elucidating whether HR1 would undergo a transition into the VBNC state when exposed to low temperature and PCBs, with and without the presence of heavy metals (HMs). The results suggested that the resuscitated strain Pseudomonas sp. HR1 harbored various functional genes related to xenobiotic biodegradation, demonstrating remarkable efficiency in Aroclor 1242 degradation and strong resistance against stress induced by low temperature and PCBs. Nevertheless, when exposed to the combined stress of low temperature, PCBs, and HMs, HR1 underwent a transition into the VBNC state. This transition was characterized by significant decreases in enzyme activities and notable changes in both morphological and physiological traits when compared to normal cells. Gene expression analysis revealed molecular shifts underlying the VBNC state, with down-regulated genes showed differential expression across multiple pathways and functions, including oxidative phosphorylation, glycolysis, tricarboxylic acid cycle, amino acid metabolism, translation and cytoplasm, while up-regulated genes predominantly associated with transcription regulation, membrane function, quorum sensing, and transporter activity. These findings highlighted the great potential of resuscitated strains as bio-inoculants in bioaugmentation and shed light on the survival mechanisms of functional strains under stressful conditions, which should be carefully considered during bioremediation processes.

Black Carbon Impacts on Paraburkholderia xenovorans Strain LB400 Cell Enrichment and Activity: Implications toward Lower-Chlorinated Polychlorinated Biphenyls Biodegradation Potential

Volatilization of lower-chlorinated polychlorinated biphenyls (LC-PCBs) from sediment poses health threats to nearby communities and ecosystems. Biodegradation combined with black carbon (BC) materials is an emerging bioaugmentation approach to remove PCBs from sediment, but development of aerobic biofilms on BC for long-term, sustained LC-PCBs remediation is poorly understood. This work aimed to characterize the cell enrichment and activity of biphenyl- and benzoate-grown Paraburkholderia xenovorans strain LB400 on various BCs. Biphenyl dioxygenase gene (bphA) abundance on four BC types demonstrated corn kernel biochar hosted at least 4 orders of magnitude more attached cells per gram than other feedstocks, and microscopic imaging revealed the attached live cell fraction was >1.5× more on corn kernel biochar than GAC. BC characteristics (i.e., sorption potential, pore size, pH) appear to contribute to cell attachment differences. Reverse transcription qPCR indicated that BC feedstocks significantly influenced bphA expression in attached cells. The bphA transcript-per-gene ratio of attached cells was >10-fold more than suspended cells, confirmed by transcriptomics. RNA-seq also demonstrated significant upregulation of biphenyl and benzoate degradation pathways on attached cells, as well as revealing biofilm formation potential/cell-cell communication pathways. These novel findings demonstrate aerobic PCB-degrading cell abundance and activity could be tuned by adjusting BC feedstocks/attributes to improve LC-PCBs biodegradation potential.

In situ chlorpyrifos (CPF) degradation by Acrobeloides maximus: Insights from chromatographic analysis

The objective of this study was to evaluate the efficiency of nematodes in zooremediation of chlorpyrifos (CPF), an organophosphate pesticide. The nematode population Acrobeloides maximus (A. maximus) was employed for bioremediation, converting CPF into non-toxic residues. Optimal growth conditions for mass production of A. maximus were achieved by maintaining a temperature of 25 °C, pH 8, and supplementing the culture medium with plant nutrients. The nematodes were then immobilized within sodium alginate beads. The efficacy of the degradation process was assessed using various analytical techniques, including UV-Visible spectroscopy, HPTLC, FTIR, and LC-MS, confirming the successful breakdown of CPF. The bioreactor demonstrated a complete degradation efficiency of CPF exceeding 99%. Additionally, LC-MS analysis was conducted to elucidate the degradation pathway based on the formation of intermediates. These results underscore the potential of A. maximus as a sustainable organism for addressing environmental contamination arising from CPF pesticide.

Techniques and mechanisms of bacteria immobilization on biochar for further environmental and agricultural applications

Bacteria immobilization on biochar is a promising approach to achieve high concentration and stability of microbial cells for several applications. The present review addressed the techniques utilized for bacteria immobilization on biochar, discussing the mechanisms involved in this process, as well as the further utilization in bioremediation and agriculture. This article presents three immobilization techniques, which vary according to their procedures and conditions, including cell growth, adsorption, and adaptation. The mechanisms for cell immobilization are primarily adsorption and biofilm formation on biochar. The favorable characteristics of biochar immobilization depend on the pyrolysis methods, raw materials, and properties of biochar, such as surface area, pore size, pH, zeta potential, hydrophobicity, functional groups, and nutrients. Scanning electron microscope (SEM) and colony forming unit (CFU) are the analyses commonly carried out to verify the efficiency of bacteria immobilization. The benefits of applying biochar-immobilized bacteria include soil decontamination and quality improvement, which can improve plant growth and crop yield. Therefore, this emerging technology represents a promising solution for environmental and agricultural purposes. However, it is important to evaluate the potential adverse impacts on native microbiota by introducing exogenous microorganisms.

Recent progress in the production and application of biochar and its composite in environmental biodegradation

Over the past few decades, extensive research has been conducted to develop cost-effective and high-quality biochar for environmental biodegradation purposes. Pyrolysis has emerged as a promising method for recovering biochar from biomass and waste materials. This study provides an overview of the current state-of-the-art biochar production technology, including the advancements and biochar applications in organic pollutants remediation, particularly wastewater treatment. Substantial progress has been made in biochar production through advanced thermochemical technologies. Moreover, the review underscores the importance of understanding the kinetics of pollutant degradation using biochar to maximize its synergies for potential environmental biodegradation. Finally, the study identifies the technological gaps and outlines future research advancements in biochar production and its applications for environmental biodegradation.

Enhanced simultaneous removal of sulfamethoxazole and zinc (II) in the biochar-immobilized bioreactor: Performance, microbial structures and gene functions

Biochar-immobilized functional bacteria Bacillus SDB4 was applied for sulfamethoxazole (SMX) and zinc (Zn2+) simultaneous removal in the bioreactor. Under the optimal operating conditions of HRT of 10 h, pH of 7.0, SMX concentration of 10 mg L-1 and Zn2+ concentration of 50 mg L-1, the removal efficiencies of SMX and Zn2+ by the immobilized reactor (IR) were 97.42% and 96.14%, respectively, 20.39% and 30.15% higher than those by free bioreactor (FR). SEM-EDS and FTIR results revealed that the functional groups and light metals on the carrier promoted the biosorption and biotransformation of SMX and Zn2+ in IR. Moreover, the improvement of SMX and Zn2+ removal might be related to the abundance enhancement of functional bacteria and genes. Bacillus SDB4 responsible for SMX and Zn2+ removal was the main strain in IR and FR. Biochar increased the relative abundance of Bacillus from 32.12% in FR to 38.73% in IR and improved the abundances of functional genes (such as carbohydrate metabolism, replication and repair and membrane transport) by 1.82%-11.04%. The correlations among the physicochemical properties, microbial communities, functional genes and SMX-Zn2+ co-contaminant removal proposed new insights into the mechanisms of biochar enhanced microbial removal of antibiotics and heavy metals in biochar-immobilized bioreactors.

Bioremediation of aniline aerofloat wastewater at extreme conditions using a novel isolate Burkholderia sp. WX-6 immobilized on biochar

Aniline aerofloat (AAF) is a refractory organic pollutant in floatation wastewater. Little information is currently available on its biodegradation. In this study, a novel AAF-degrading strain named Burkholderia sp. WX-6 was isolated from mining sludge. The strain could degrade more than 80% of AAF at different initial concentrations (100-1000 mg/L) within 72 h. AAF degrading curves were fitted well with the four-parameter logistic model (R² >0.97), with the degrading half-life ranging from 16.39 to 35.55 h. This strain harbors metabolic pathway for complete degradation of AAF and is resistant to salt, alkali, and heavy metals. Immobilization of the strain on biochar enhanced both tolerance to extreme conditions and AAF removal, with up to 88% of AAF removal rate in simulated wastewater under alkaline (pH 9.5) or heavy metal pollution condition. In addition, the biochar-immobilized bacteria removed 59.4% of COD in the wastewater containing AAF and mixed metal ions within 144 h, significantly (P < 0.05) higher than those by free bacteria (42.6%) and biochar (48.2%) only. This work is helpful to understand AAF biodegradation mechanism and provides viable references for developing practical biotreatment technique of mining wastewater.

More effective application of biochar-based immobilization technology in the environment: Understanding the role of biochar

In recent years, biochar-based immobilization technology (BIT) has been widely used to treat different environmental issues because of its cost-effectiveness and high removal performance. However, the complexity of the real environment is always ignored, which hinders the transfer of the BIT from lab-scale to commercial applications. Therefore, in this review, the analysis is performed separately on the internal side of the BIT (microbial fixation and growth) and on the external side of the BIT (function) to achieve effective BIT performance. Importantly, the internal two stages of BIT have been discussed concisely. Further, the usage of BIT in different areas is summarized precisely. Notably, the key impacts were systemically analyzed during BIT applications including environmental conditions and biochar types. Finally, the suggestions and perspectives are elucidated to solve current issues regarding BIT.

Methanol promotes the biodegradation of 2,2',3,4,4',5,5'-heptachlorobiphenyl (PCB 180) by the microbial consortium QY2: Metabolic pathways, toxicity evaluation and community response

As one of the most frequently detected PCB congeners in human adipose tissue, 2,2',3,4,4',5,5'-heptachlorobiphenyl (PCB 180) has attracted much attention. However, PCB 180 is difficult to be directly utilized by microorganisms due to its hydrophobicity and obstinacy. Herein, methanol (5 mM) as a co-metabolic carbon source significantly stimulated the degradation performance of microbial consortium QY2 for PCB 180 (51.9% higher than that without methanol addition). Six metabolic products including low-chlorinated PCBs and chlorobenzoic acid were identified during co-metabolic degradation, denoting that PCB 180 was metabolized via dechlorination, hydroxylation and ring-opening pathways. The oxidative stress and apoptosis induced by PCB 180 were dose-dependent, but the addition of methanol effectively promoted the tolerance of consortium QY2 to resist unfavorable environmental stress. Additionally, the significant reduction of intracellular reactive oxygen species (ROS) and enhancement of cell viability during methanol co-metabolic degradation proved that the degradation was a detoxification process. The microbial community and network analyses suggested that the potential PCB 180 degrading bacteria in the community (e.g., Achromobacter, Cupriavidus, Methylobacterium and Sphingomonas) and functional abundance of metabolic pathways were selectively enriched by methanol, and the synergies among species whose richness increased after methanol addition might dominate the degradation process. These findings provide new insights into the biodegradation of PCB 180 by microbial consortium.

Simultaneous adsorption and biodegradation of polychlorinated biphenyls using resuscitated strain Streptococcus sp. SPC0 immobilized in polyvinyl alcohol‑sodium alginate

Enhanced bioremediation of polychlorinated biphenyls (PCBs) is a promising and effective strategy for eliminating the risks posed by PCBs. In the present study, the feasibility of utilizing an immobilization approach to enhance the PCBs degradation performance of a resuscitated strain Streptococcus sp. SPC0 was evaluated. The results indicated that a mixed matrix containing polyvinyl alcohol (PVA) and sodium alginate (SA) used as immobilized carriers provided a porous microstructure space for SPC0 colonization and proliferation. The enhanced removal of PCBs by immobilized SPC0 was attributed to simultaneous adsorption and biodegradation performances of PVA-SA-SPC0 beads. The relative equilibrium adsorption capacity of immobilized beads increased with elevated initial concentration, and the maximum theoretical value calculated was 1.64 mg/g. The adsorption process of PCBs by immobilized beads was well fitted to the quasi-second-order kinetic model, and most suitable for Langmuir isotherm model. Immobilized SPC0 enhanced PCB removal with 1.0-7.1 times higher than free cells. Especially, more effective removal of PCBs at higher concentrations could be achieved, in which 73.9 % of 20 mg/L PCBs was removed at 12 h by immobilized SPC0, whereas only 12.0 % by free cells. Moreover, the immobilized SPC0 with excellent stability and reusability retained almost 100 % of the original PCBs removal activity after reusing four times. These results revealed the application potential of immobilizing resuscitated strains for enhanced bioremediation of PCBs.

Enhanced biodegradation of thiamethoxam with a novel polyvinyl alcohol (PVA)/sodium alginate (SA)/biochar immobilized Chryseobacterium sp H5

Long-term and extensive usage of thiamethoxam, the second-generation neonicotinoid insecticide, has caused a serious threat to non-target organisms and ecological security. Efficient immobilized microorganism techniques are a sustainable solution for bioremediation of thiamethoxam contamination. A Gram-negative aerobic bacterium Chryseobacterium sp H5 with high thiamethoxam-degrading efficiencies was isolated from activated sludge. Then we developed a novel polyvinyl alcohol (PVA)/sodium alginate (SA)/biochar bead with this functional microbe immobilization to enhance the biodegradation and removal of thiamethoxam. Results indicated that the total removal and biodegradation rate of thiamethoxam with PVA/SA/biochar (0.7 %) beads with Chryseobacterium sp H5 immobilization at 30 °C and pH of 7.0 within 7 d reached about 90.47 % and 68.03 %, respectively, much higher than that using PVA/SA immobilized microbes (75.06 %, 56.05 %) and free microbes (61.72 %). Moreover, the PVA/SA/biochar (0.7 %) immobilized microbes showed increased tolerance to extreme conditions. Biodegradation metabolites of thiamethoxam were identified and two intermediates were first reported. Based on the identified biodegradation intermediates, cleavage of C-N between the 2-chlorothiazole ring and oxadiazine, dichlorination, nitrate reduction and condensation reaction would be the major biodegradation routes of thiamethoxam. Results of this work suggested the novel PVA/SA/biochar beads with Chryseobacterium sp H5 immobilization would be helpful for the effective bioremediation of thiamethoxam contamination.

Immobilization of Biomass Materials for Removal of Refractory Organic Pollutants from Wastewater

In the field of environmental science and engineering, microorganisms, enzymes and algae are promising biomass materials that can effectively degrade pollutants. However, problems such as poor environmental adaptability, recycling difficulties, and secondary pollution exist in the practical application of non-immobilized biomass materials. Biomass immobilization is a novel environmental remediation technology that can effectively solve these problems. Compared with non-immobilized biomass, immobilized biomass materials have the advantages of reusability and stability in terms of pH, temperature, handling, and storage. Many researchers have studied immobilization technology (i.e., methods, carriers, and biomass types) and its applications for removing refractory organic pollutants. Based on this, this paper reviews biomass immobilization technology, outlines the mechanisms and factors affecting the removal of refractory organic pollutants, and introduces the application of immobilized biomass materials as fillers for reactors in water purification. This review provides some practical references for the preparation and application of immobilized biomass materials and promotes further research and development to expand the application range of this material for water purification.

The influence of anaerobic dechlorination on the aerobic degradation of PCBs in e-waste-contaminated soils in an anaerobic-aerobic two-stage treatment

The combination of microbial reductive dechlorination and aerobic oxidation (RD-AO) process was proposed to be a promising strategy for extensive bioremediation of highly chlorinated polychlorinated biphenyls (PCBs). Nonetheless, experimental evidence on the impact of the RD on subsequent AO in anaerobic-aerobic two-stage treatment remains scarce. The present study applied stable-isotope probing (SIP) to explore the RD-AO mediated degradation of PCBs in an e-waste-contaminated soil. The RD-AO treatment resulted in 37.1 % and 48.2 % degradation of PCB180 and PCB9, respectively, while the PCB9 degradation efficiency decreased compared to the sole AO (81.2 %). The inhibition of PCB aerobic degradation might be caused by the alteration of aerobic bacterial community, which was proved by a higher abundance of anaerobic bacteria and a lower abundance of aerobic bacteria being observed in the aerobic stage of RD-AO. Further evidence was obtained using DNA-SIP that the anaerobic stage altered the PCB degraders' community structures and changed three of the five degraders. There were four lineages (Arenimonas, Steroidobacter, Sulfurifustis, and Thermoanaerobacterales) identified as PCB degraders for the first time. Interestingly, three of them were found in RD-AO microcosm, suggesting that anaerobic-aerobic two-stage treatment can recruit novel bacteria involved in PCBs aerobic degradation. The present study provided novel insight into the synergistic integration of anaerobic and aerobic processes for extensive degradation of highly chlorinated PCBs.

Application of biochar immobilized microorganisms for pollutants removal from wastewater: A review

Microbial immobilization technology (MIT) has been rapidly developed and used to remove pollutants from water/wastewater in recent years, owing to its high stability, rapid reaction rate, and high activity. Microbial immobilization carrier with low cost and high removal efficiency is the key of MIT. Biochar is considered to be an efficient carrier for microbial immobilization because of its high porosity and good adsorption effect, which can provide a habitat for microorganisms. The use of biochar immobilized microorganisms to treat different pollutants in wastewater is a promising treatment method. Compared with the other biological treatment technology, biochar immobilized microorganisms can improve microbial abundance, repeated utilization ratio, microbial metabolic capacity, etc. However, current research on this method is still in its infancy. Little attention has been paid to the interaction mechanisms between biochar and microorganisms, and many studies are only carried out in the laboratory. There are still problems such as difficult recovery after use and secondary pollution caused by residual pollutants after biochar adsorption, which need further clarification. To have comprehensive digestion and an in-depth understanding of biochar immobilized microorganisms technology in wastewater treatment, the wastewater treatment methods based on biochar are firstly summarized in this review. Then the mechanisms of immobilized microorganisms were explored, and the applications of biochar immobilized microorganisms in wastewater were systematically reviewed. Finally, suggestions and perspectives for future research and practical application are put forward.

Immobilization of microbes on biochar for water and soil remediation: A review

Biochar has caught great attention over the last decade with the loose and porous structure, and carbon stability provides suitable living conditions for the growth and activity of microorganisms. This review provided a comprehensive summary of biochar immobilization microbe (BIM) in water and soil decontamination. Firstly, the bacterial immobilization techniques including adsorption, entrapping, and covalence methods were exhibited. Secondly, the applications of BIM in water and soil environmental remediation were introduced, mainly including the treatment of organic pollutants, heavy metals, and N/P, among which the most frequently immobilized microorganism was Bacillus. Then, the mechanisms of adsorption, redox, and degradation were analyzed. Finally, pertinent questions for future research of BIM technology were proposed. The purpose of this paper is to provide useful background information for the selection of better biochar fixation microorganisms for water and soil remediation.

Immobilization of Microbes for Biodegradation of Microcystins: A Mini Review

Harmful cyanobacterial blooms (HCBs) frequently occur in eutrophic freshwater ecosystems worldwide. Microcystins (MCs) are considered to be the most prominent and toxic metabolites during HCBs. MCs may be harmful to human and animal health through drinking water and recreational water. Biodegradation is eco-friendly, cost-effective and one of the most effective methods to remove MCs. Many novel MC-degrading bacteria and their potential for MCs degradation have been documented. However, it is a challenge to apply the free MC-degrading bacterial cells in natural environments due to the long-term operational instability and difficult recycling. Immobilization is the process of restricting the mobility of bacteria using carriers, which has several advantages as biocatalysts compared to free bacterial cells. Biological water treatment systems with microbial immobilization technology can potentially be utilized to treat MC-polluted wastewater. In this review article, various types of supporting materials and methods for microbial immobilization and the application of bacterial immobilization technology for the treatment of MCs-contaminated water are discussed. This article may further broaden the application of microbial immobilization technology to the bioremediation of MC-polluted environments.

Development of biochar-impregnated alginate beads for the delivery of biocontrol agents for peanut aflatoxin

The competitive inhibition of aflatoxigenic fungi by non-aflatoxigenic Aspergillus flavus has proved to be an effective method to prevent and control peanut aflatoxin contamination, and most of the currently used inoculum carriers are grains. In this study, the reliability and efficiency of replacing grain kernels with novel chitosan-coated alginate-poly(N-isopropylacrylamide) (PNIPAAm) beads impregnated with biochar (CSACB) were evaluated. Characterisation of the beads was performed by SEM, thermogravimetry analysis (TGA), and swelling properties analyses. The optimised CSACB beads had good physical stability, shelf life, and entrapment efficiency. In addition, the water-holding capacity and porous structure were excellent, as the biochar provided a beneficial microenvironment for the attachment and microbial growth of the biocontrol fungus. The effect of reducing aflatoxin in peanuts was verified experimentally. Collectively, the novel CSACB beads are suitable carriers of non-aflatoxigenic A. flavus for the biocontrol of peanut aflatoxin.

Understanding the role of biochar in affecting BDE-47 biodegradation by Pseudomonas plecoglossicida: An integrated analysis using chemical, biological, and metabolomic approaches

Biochar-assisted microbial degradation technology is considered as an important strategy to eliminate organic pollutants, but the mechanism of biochar in affecting biodegradation has not been systematically studied. To address this knowledge gap, the effect of various biochars on biodegradation of different initial concentrations of BDE-47 by Pseudomonas plecoglossicida was investigated. The results showed that biochar exhibited significant promotion to the biodegradation of BDE-47, especially at concentrations of BDE-47 above 100 μg/L. The promotion effect was negatively influenced by the aromaticity and micropore volume of biochar. Biochar alleviated the cytotoxicity of BDE-47 to P. plecoglossicida and promoted cell proliferation based on toxicity assays. Additionally, biochar acted as shelter and stimulated the secretion of extracellular polymeric substances, which might support P. plecoglossicida to struggle with extreme conditions. Metabolomic analysis indicated that biochar resulted in upregulation expression of 38 metabolites in P. plecoglossicida. These upregulated metabolites were mainly related to glyoxylate and dicarboxylate metabolism, citrate cycle, and serial amino acid metabolism, suggesting that biochar could improve the BDE-47 biodegradation via enhancing oxidative metabolism and energy supply of the bacterial cells. This work elucidates how biochar can affect BDE-47 biodegradation and provides insights for the application prospect of biochar-assisted microbial degradation technology in the environment.

Enhanced remediation of PAHs-contaminated site soil by bioaugmentation with graphene oxide immobilized bacterial pellets

Bioaugmentation is considered as a promising technology for cleanup of polycyclic aromatic hydrocarbons (PAHs) from contaminated site soil, however, available high-efficiency microbial agents remain very limited. Herein, we explored graphene oxide (GO)-immobilized bacterial pellets (JGOLB) by embedding high-efficiency degrading bacteria Paracoccus aminovorans HPD-2 in alginate-GO-Luria-Bertani medium (LB) composites. Microcosm culture experiments were performed with contaminated site soil to assess the effect of JGOLB on the removal of PAHs. The results showed that JGOLB exhibited greatly improved mechanical strength, larger specific surface area and more enriched mesopores, compared with traditional immobilized bacterial pellets. They significantly increased the removal rate of PAHs by 18.51% compared with traditional bacterial pellets, reaching the removal rate at 62.86% over 35 days of incubation. Moreover, the increase mainly focused on high-molecular-weight PAHs. JGOLB not only greatly increased the abundance of embedded degrading bacteria in soil, but also significantly enhanced the enrichment of potential indigenous degrading bacteria (Pseudarthrobacter and Arthrobacter), the functional genes involved in PAHs degradation and a number of ATP transport genes in the soil. Overall, such nanocomposite bacterial pellets provide a novel microbial immobilization option for remediating organic pollutants in harsh soil environment.

Lead adsorption and antibacterial activity using modified magnetic biochar/sodium alginate nanocomposite

Biochar is one of the most promising wastewater treatment materials. As shown in the Scanning Electron Micrograph, the magnetic biochar (BC) cross-linked glutaraldehyde (G) with sodium alginate (SA) (BC-G-SA) nanocomposite formed with uniform particle size without aggregation, and an X-Ray Diffraction study revealed that the BC-G-SA nanocomposite has an amorphous structure. The BC-G-SA nanocomposite enhanced the microwave adsorption process for Pb (II). The maximum metal capacity value was obtained using the microwave adsorption technique at pH 5.0 and contact time 20 s for Pb (II) at medium and low microwave power (940 and 1400 μmol g^-1, respectively). Pb (II) adsorption isotherm follows a pseudo-second-order model. Also, the BC-G-SA nanocomposite effectively inhibited bacterial growth throughout the growth kinetics experiment. BC-G-SA inhibited the growth of S. aureus at a MIC of 200 g mL^-1, whereas L. monocytogenes had a MIC of 200 g mL^-1. The MIC values for E. faecalis and E. faecium were significantly lower (50 and 100 g mL^-1, respectively).