Overview on the occurrence of microplastics in air and implications from the use of face masks during the COVID-19 pandemic

Identification of microplastics in human tear fluid and meibum: Implications for dry eye disease pathogenesis

Microplastics (MPs) are emerging environmental pollutants that are increasingly being detected in various human tissues. However, their impact on ocular health is underexplored. This study investigated the presence of MPs in tear fluid and meibum of 45 patients with dry eye disease (DED). Various examinations were conducted, including the Schirmer I test, fluorescein tear film break-up time (FBUT) and other dry eye-related assessments. MPs were identified in the tear fluid and meibum and were categorized into five distinct types, with polyethylene (PE) being the most predominant. Notably, PE levels exhibited significant correlations with key DED parameters, such as Schirmer I test scores and FBUT. In in-vitro studies, PE exposure reduced the viability and induced apoptosis of human corneal epithelial cells and conjunctival epithelial cells in a dose-dependent manner. In mouse models, topical exposure to PE drops, which imitate airborne PE exposure, induced typical dry eye signs, reduced goblet cell numbers, and triggered conjunctival inflammation. PE-treated meibomian glands exhibited changes, but these changes were not statistically significant, possibly because of the limited duration of the study. This study is the first to confirm the presence of microplastics (MPs) in human tear fluid and meibum while also offering novel insights into the potential pathogenic effects of airborne MP exposure on ocular health.

Plastic waste recycling for the production of graphene nanomaterials using electric arc discharge

The increasing global consumption of plastic products has resulted in a growing accumulation of plastic waste, posing severe environmental challenges. The study aims to explore methods for recycling plastic macaque waste to produce carbon nanomaterials. Carbon nanomaterials were obtained via electric arc discharge from plastic waste processed at 1173 K in a nitrogen and water vapor environment. Key properties such as moisture, ash, and volatility were analyzed with a Thermoster Eltra analyzer. Pore volume, bulk density, pH, and adsorption activity were also assessed. This study addresses plastic waste pollution by converting it into porous carbon nanomaterials through pyrolysis at 900 °C. These materials, used as electrodes, produce graphene-forming nanomaterials via electric arc discharge. Analysis confirmed the composition using Raman spectroscopy, X-ray diffraction, and gas chromatography. The study reveals that the electrical conductivity of the synthesized carbon nanomaterials is close to that of graphite, with a reduction in electrical resistance of up to 3.6 times compared to the initial carbonized material. The process yields valuable products like nanomaterials, hydrogen, and flammable gases. This research presents an innovative and sustainable approach for the recycling of plastic waste into graphene-forming carbon nanomaterials using electric arc discharge.

The Impact of Microplastics in Food and Drugs on Human Health: A Review of the MENA Region

Microplastics (MPs), defined as plastic particles smaller than 5 mm, have emerged as a global environmental and public health crisis, infiltrating air, water, soil, and food systems worldwide. MPs originate from the breakdown of larger plastic debris, single-use plastics, and industrial processes, entering food. Emerging evidence underscores the ability of MPs to cross biological barriers, including the blood-brain barrier, triggering neuroinflammatory responses and contributing to neurodegenerative diseases such as Alzheimer's and Parkinson's. Polystyrene (PS), a common type of MP, activates microglial cells, releasing pro-inflammatory cytokines like tumor necrosis factor (TNF-α) and interleukins, which increase neuronal damage. MPs have also been linked to cardiovascular diseases, with studies detecting polyethylene (PE) and polyvinyl chloride (PVC) in carotid artery plaques, increasing the risk of myocardial infarction and stroke. Furthermore, MPs disrupt endocrine function, alter lipid metabolism, and induce gut microbiome imbalances, posing multifaceted health risks. In the MENA region, MP pollution is particularly severe, with the Mediterranean Sea receiving an estimated 570,000 tons of plastic annually, equivalent to 33,800 plastic bottles per minute. Studies in Egypt, Lebanon, and Tunisia document high MP concentrations in marine ecosystems, with herbivorous fish like Siganus rivulatus containing over 1000 MPs per individual due to the ingestion of contaminated seaweed. Despite these findings, public awareness and regulatory frameworks remain inadequate, with only 24% of Egyptians demonstrating sufficient knowledge of safe plastic use. This review emphasizes the urgent need for region-specific research, policy interventions, and public awareness campaigns to address MP pollution. Recommendations include sustainable waste management practices, the promotion of biodegradable alternatives, and enhanced monitoring systems to mitigate the health and environmental impacts of MPs in the MENA region.

Analysis of Brazilian plastic waste management in the global context and case study of the City of Vitória, Espírito Santo

This review analyses Brazil's current stage of plastic waste management, comparing it to what is being carried out worldwide. The Brazilian National Solid Waste Policy established principles and guidelines for solid waste management. However, a decade after its implementation, the results demonstrate timid results about those expected. Brazil's official solid waste and plastics recycling rates are around 4% and 1%, respectively, considerably behind countries with comparable economic growth levels. This work dedicates considerable attention to microplastic pollution, a worldwide concern with potential effects on water bodies, the atmosphere, soils, human health, and vegetal and animal lives. A case study on the solid waste management system in Vitória City, the capital of Espírito Santo, was developed. Besides, a portrait of the pollution in Vitória and Espírito Santo Bays in the atmosphere and mangrove areas is presented. The more critical issues found were the low adherence of the population's city in the selective waste collection (what is reflected in the low solid waste recycling rates), plastic debris, and tiny plastic in the waters, coexisting with heavy metals and hydrocarbons-originated from industrial and anthropogenic activities; microplastics are present in the atmosphere, adding their adverse effects to those of the pollutants already existing in the air and the illegal disposal of waste and the anthropogenic activities which degrade the mangrove ecosystems. A global treaty is being discussed at the United Nations. It's expected that their definitions, initially promised by the end of 2024, will be able to eradicate plastic pollution effectivelly.

Biotransformation of microplastics from three-layer face masks by nitrifying-denitrifying consortia

COVID-19 increased microplastics (MP) contamination due to the extensive use of single-use personal protective equipment, particularly three-layer face masks. MP from face masks enter wastewater treatment plants (WWTPs), which were not designed to remove them. We utilized nitrifying-denitrifying microbial consortia and synthetic urban wastewater to evaluate the biotransformation of MP from each layer of three-layer face masks made of polypropylene (PP). The biotransformation carried out by the nitrifying-denitrifying consortia altered the surface of the outer, middle, and inner layers, as a consequence of the chemical modification of the PP-MP structure. Abiotic controls did not show changes on the physicochemical and thermal properties of PP-MP. Biotic tests showed increments in both the carbonyl and hydroxyl indices of the three layers in 42 days. The outer layer showed the greatest degree of biotransformation, which was consistent with morphological changes detected by scanning electron microscopy and in physicochemical properties such as crystallinity, evaporation, and fusion temperature. The nitrifying-denitrifying consortia, which removed 99 % of the total nitrogen from the synthetic urban wastewater, had several genera with proven capacity to biotransform MP such as Cephaloticoccus and Pseudomonas.

Review on the relationship between microplastics and heavy metals in freshwater near mining areas

Microplastics (MPs), degraded from plastic wastes, have drawn significant attention worldwide due to its prevalence and rapid transition. Contamination of freshwater with MPs has become an emerging global issue. Heavy metals (HMs), a prominent global pollutant, also garnered much attention due to their potential interaction with MPs, presenting a multifaceted environmental threat. The primary source of HM contamination in freshwater has been identified as mining sites. Additionally, the increasing use of plastic materials within mining areas raises concerns about MP release into the surrounding freshwater environments. Recent studies only provide information on the contamination of HMs status with MPs. However, studies on the mechanism responsible for MPs contamination from both external and internal sources of freshwater MPs and HMs are limited. The knowledge gaps in the deposition and fate of MPs in various mining situations and the possibility of combined impacts of heavy metals and MPs in the ecosystem raise ecological concerns. Here, we review the origins of MPs and HM pollution within mining sites and explore the potential combined detrimental impacts on plants and animal life. We found out that polystyrene (PS) and polyethylene (PE) have higher adsorption affinity to heavy metals, and the mingle toxic consequence of the MPs and HM can depend on the MP surface properties, pH, and salinity of the neighboring water solution. The Langmuir and Freundlich isotherm models enable the efficient design of adsorption systems. The Langmuir model describes single-layer adsorption at homogeneous sites, while the Freundlich model addresses multilayer adsorption on heterogeneous surfaces. The crucial mechanism of adsorption and desorption that underlies the occurrence of both MPs and heavy metals is a decisive matter in this issue.

Impact of seasonal changes and environmental conditions on suspended and inhalable microplastics in urban air

Microplastics (MPs) are ubiquitous environmental pollutants extensively detected in atmospheric environments. Airborne MPs have raised concerns due to their transport and potential health risks of inhalation exposure. However, the factors influencing airborne MPs, particularly their concentrations and shapes suspended in urban air, remain unclear. We investigated MPs in total suspension particles with one-year measurements in Taipei City and identified their features using Nile Red staining combined with fluorescence microscopy and micro-Fourier transform infrared (μFTIR) spectroscopy. This study quantified the mean number concentration of total MPs as approximately 6.0 #/m³. We observed that MP abundance varied seasonally, with higher levels in the warm season than in the cold. A similar trend was noted for polymer types. Fragment-like MPs were the predominant shape, mainly found in polystyrene (PS), polyethylene (PE), and polypropylene (PP), while fibrous MPs, detected mostly as polyethylene terephthalate (PET) and polyamide (PA), were primarily observed at sizes greater than 300 μm. Both fiber and fragment-like MPs were positively associated with particle mass concentration, temperature, ultraviolet (UV) index, and wind speed, but negatively correlated with relative humidity and rainfall. Fibrous MPs were more affected by environmental factors than fragment-like MPs. Meteorological changes significantly influenced suspended MPs more than human activity within the city.

Occurrence and migration patterns of microplastics in different tidal zones of tourist beaches: A case study in the Bohai Bay, North China

Coastal areas are acknowledged to be significant reservoirs of microplastics, while limited research on their presence and migration in the intertidal zones. This study investigated in a tourist beach in northern China, to reveal the occurrence of microplastics at different intertidal heights, elucidates their migration patterns, and discusses the impact of tourist activities on microplastics. Results showed that the mean microplastic abundance was 2114.8 ± 933.2 items/kg in sediments and 30,670.8 ± 15,094.9 items/m3 in seawater. Fibers were the most common shape; transparent, blue, green and black prevailed in color; and cellulose and PET were the most common components. Microplastic abundances decreased from high tide zone to low tide zone, and the abundances of microplastics in seawater were positively correlated with those in the high tide zone and negatively correlated with those in the low tide zone. Compared to wave disturbance, human activities have a relatively limited impact on microplastic abundance. However, intensive tourist activities contribute to a higher diversity of microplastic types on tourist beaches. This study enhances the understanding of the occurrence and migration patterns of microplastics in tourist beaches, and provides a valuable dataset and theoretical basis for subsequent research on microplastic pollution in coastal areas.

Sources, interactions, influencing factors and ecological risks of microplastics and antibiotic resistance genes in soil: A review

Microplastics (MPs) and antibiotic resistance genes (ARGs) are gaining increasing attention as they pose a threat to the ecological environment and human health as emerging contaminants. MPs has been proved to be a hot spot in ARGs, and although it has been extensively studied in water environment, the results of bibliometrics statistical analysis in this paper showed that relevant studies in soil ecological environment are currently in the initial stage. In view of this, the paper provides a systematic review of the sources, interactions, influencing factors, and ecological risks associated with MPs and ARGs in soil environments. Additionally, the mechanism and influencing factors of plastisphere formation and resistance are elaborated in detail. The MPs properties, soil physicochemical properties, soil environmental factors and agricultural activities are the primarily factors affecting the interaction between MPs and ARGs in soil. Challenges and development directions of related research in the future are also prospected. It is hoped that the review could assist in a deeper comprehension and exploration of the interaction mechanism between MPs and ARGs in soil as well as the function of MPs in the transmission process of ARGs among diverse environmental media and organisms, and provide theory basis and reference for the MPs and ARGs pollution control and remediation in soil.

The alarming link between environmental microplastics and health hazards with special emphasis on cancer

Microplastic contamination is a burgeoning environmental issue that poses serious threats to animal and human health. Microplastics enter the human body through nasal, dermal, and oral routes to contaminate multiple organs. Studies have advocated the existence of microplastics in human breast milk, sputum, faeces, and blood. Microplastics can find their ways to the sub-cellular moiety via active and passive approaches. At cellular level, microplastics follow clathrin and caveolae-dependent pathways to invade the sub-cellular environment. These environmental contaminants modulate the epigenetic control of gene expression, status of inflammatory mediators, redox homeostasis, cell-cycle proteins, and mimic the endocrine mediators like estrogen and androgen to fuel carcinogenesis. Furthermore, epidemiological studies have suggested potential links between the exposure to microplastics and the onset of various chronic diseases. Microplastics trigger uncontrolled cell proliferation and ensue tissue growth leading to various cancers affecting the lungs, blood, breasts, prostate, and ovaries. Additionally, such contamination can potentially affect sub-cellular signaling and injure multiple organs. In essence, numerous reports have claimed microplastic-induced toxicity and tumorigenesis in human and model animals. Nonetheless, the underlying molecular mechanism is still elusive and warrants further investigations. This review provides a comprehensive analysis of microplastics, covering their sources, chemistry, human exposure routes, toxicity, and carcinogenic potential at the molecular level.

PM10-bound microplastics and trace metals: A public health insight from the Korean subway and indoor environments

Inhalable airborne microplastics (MPs) presented in indoor and outdoor environments, can deeply penetrate the lungs, potentially triggering inflammation and respiratory illnesses. The present study aims to evaluate human health risks from respirable particulate matter (PM)-bound trace metals and MPs in indoor (SW- subway and IRH- indoor residential houses) and outdoor (OD) environments. This research provides an initial approach to human respiratory tract (HRT) mass depositions of PM10-bound total MPs and nine specific MP types to predict potential human health threats from inhalation exposure. Results indicate that PM-bound trace metals and MPs were around 4 times higher in SW microenvironments compared to OD locations. In IRH, cancer risk (CR) levels were estimated 9 and 4 times higher for PM10 and PM2.5, respectively. Additionally, MP particle depositions per gram of lung cell weight were highest in IRH (23.77), followed by OD and SW. Whereas, lifetime alveoli depositions of MPs were estimated at 13.73 MP/g, which exceeds previously reported respiratory disease fatality cases by 10 to 5 times. Prolonged exposure duration at IRH emerged as a key factor contributing to increased CR and MP lung deposition levels. This research highlights severe lung risks from inhaling PM-bound MPs and metals, offering valuable health insights.

Orally Ingested Micro- and Nano-Plastics: A Hidden Driver of Inflammatory Bowel Disease and Colorectal Cancer

Micro- and nano-plastics (MNPLs) can move along the food chain to higher-level organisms including humans. Three significant routes for MNPLs have been reported: ingestion, inhalation, and dermal contact. Accumulating evidence supports the intestinal toxicity of ingested MNPLs and their role as drivers for increased incidence of colorectal cancer (CRC) in high-risk populations such as inflammatory bowel disease (IBD) patients. However, the mechanisms are largely unknown. In this review, by using the leading scientific publication databases (Web of Science, Google Scholar, Scopus, PubMed, and ScienceDirect), we explored the possible effects and related mechanisms of MNPL exposure on the gut epithelium in healthy conditions and IBD patients. The summarized evidence supports the idea that oral MNPL exposure may contribute to intestinal epithelial damage, thus promoting and sustaining the chronic development of intestinal inflammation, mainly in high-risk populations such as IBD patients. Colonic mucus layer disruption may further facilitate MNPL passage into the bloodstream, thus contributing to the toxic effects of MNPLs on different organ systems and platelet activation, which may, in turn, contribute to the chronic development of inflammation and CRC development. Further exploration of this threat to human health is warranted to reduce potential adverse effects and CRC risk.

Microplastics in marine ecosystems: A comprehensive review of biological and ecological implications and its mitigation approach using nanotechnology for the sustainable environment

Microplastic contamination has rapidly become a serious environmental issue, threatening marine ecosystems and human health. This review aims to not only understand the distribution, impacts, and transfer mechanisms of microplastic contamination but also to explore potential solutions for mitigating its widespread impact. This review encompasses the categorisation, origins, and worldwide prevalence of microplastics and methodically navigates the complicated structure of microplastics. Understanding the sources of minute plastic particles infiltrating water bodies worldwide is critical for successful removal. The presence and accumulation of microplastics has far reaching negative impacts on various marine creatures, eventually extending its implications to human health. Microplastics are known to affect the metabolic activities and the survival of microbial communities, phytoplankton, zooplankton, and fauna present in marine environments. Moreover, these microplastics cause developmental abnormalities, endocrine disruption, and several metabolic disorders in humans. These microplastics accumulates in aquatic environments through trophic transfer mechanisms and biomagnification, thereby disrupting the delicate balance of these ecosystems. The review also addresses the tactics for minimising the widespread impact of microplastics by suggesting practical alternatives. These include increasing public awareness, fostering international cooperation, developing novel cleanup solutions, and encouraging the use of environment-friendly materials. In conclusion, this review examines the sources and prevalence of microplastic contamination in marine environment, its impacts on living organisms and ecosystems. It also proposes various sustainable strategies to mitigate the problem of microplastics pollution. Also, the current challenges associated with the mitigation of these pollutants have been discussed and addressing these challenges require immediate and collective action for restoring the balance in marine ecosystems.

Human inhalation exposure assessment of the airborne microplastics from indoor deposited dusts during winter in Dhaka, Bangladesh

Microplastic (MP) contamination has become a concern due to its ubiquitous presence. Recent studies have found MPs to be present in multiple human organs. This study was carried out to evaluate the presence and characterize MPs in indoor dust deposition. Deposited dust was collected from fifteen households in Dhaka city. The samples underwent quantification of MPs using stereomicroscopy. Fourier Transform Infrared (FTIR) spectroscopy was performed to understand the polymer composition. MPs of the size group ranging from 50 to 250 μm were the most dominant. The deposition rates varied from 7.52 × 10³ MPs/m2/day to 66.29 × 10³ MPs/m2/day, with the mean deposition rate being 34 × 10³ MPs/m2/day. Notably, the number of occupants and the height of the sampling location above the ground level were found to influence the deposition rates. Various polymers, including polyester (PET), polyethylene (PE), Nylon, and polypropylene (PP), were identified. The estimated mean inhalation exposure was 2986 ± 1035 MPs/kg-BW/day. This work highlights the need for additional research to explore indoor microplastic deposition and its potential effect on human health in the densely inhabited and severely polluted megapolis of Dhaka, Bangladesh.

ROS-dependent degeneration of human neurons induced by environmentally relevant levels of micro- and nanoplastics of diverse shapes and forms

Our study explores the pressing issue of micro- and nanoplastics (MNPs) inhalation and their subsequent penetration into the brain, highlighting a significant environmental health concern. We demonstrate that MNPs can indeed penetrate murine brain, warranting further investigation into their neurotoxic effects in humans. We then proceed to test the impact of MNPs at environmentally relevant concentrations, with focusing on variations in size and shape. Our findings reveal that these MNPs induce oxidative stress, cytotoxicity, and neurodegeneration in human neurons, with cortical neurons being more susceptible than nociceptors. Furthermore, we examine the role of biofilms on MNPs, demonstrating that MNPs can serve as a vehicle for pathogenic biofilms that significantly exacerbate these neurotoxic effects. This sequence of investigations reveals that minimal MNPs accumulation can cause oxidative stress and neurodegeneration in human neurons, significantly risking brain health and highlights the need to understand the neurological consequences of inhaling MNPs. Overall, our developed in vitro testing battery has significance in elucidating the effects of environmental factors and their associated pathological mechanisms in human neurons.

Pyr-GC-Orbitrap-MS method for the target/untargeted analysis of microplastics in air

Pyrolysis-gas chromatography coupled to Orbitrap-mass spectrometry is a novel technique that allows the low level and precise determination of microplastics in environmental samples. In this paper, we develop and assess the target and untargeted performance of Pyr-GC-Orbitrap-MS. The method was optimized for 10 plastic polymers: polymethyl methacrylate, nylon-6,6, polypropylene, nitrile butadiene rubber, polyvinyl chloride, polyethylene terephthalate, acrylonitrile butadiene styrene, polyethylene, polycarbonate, and polystyrene. Standards were home-made using a diamond driller to attain mean sizes within the range of 45-382 µm. A step-by-step optimization of the analytical procedure was carried out. First, accurate mass measurement of each polymer at 60,000 resolution was studied to select the 3 most intense and selective quantification and confirmation ions. Second, internal standard quantification was optimized, and good linearity, repeatability, and reproducibility were obtained. Blank contribution and instrumental detection limit were evaluated for each polymer. Finally, the combined and expanded uncertainty of the Pyr-GC-Orbitrap-MS method was calculated to determine the sources of variation, considering that home-made standards were used. To evaluate method performance, targeted and non-targeted analysis of indoor air samples collected from gyms and department stores were carried out. The Pyr-GC-Orbitrap-MS methodology herein described can be applied for the quantitative assessment of MPs and other substances in different matrices.

Wearing face masks as a potential source for inhalation and oral uptake of inanimate toxins - A scoping review

BACKGROUND

From 2020 to 2023 many people around the world were forced to wear masks for large proportions of the day based on mandates and laws. We aimed to study the potential of face masks for the content and release of inanimate toxins.

METHODS

A scoping review of 1003 studies was performed (database search in PubMed/MEDLINE, qualitative and quantitative evaluation).

RESULTS

24 studies were included (experimental time 17 min to 15 days) evaluating content and/or release in 631 masks (273 surgical, 228 textile and 130 N95 masks). Most studies (63%) showed alarming results with high micro- and nanoplastics (MPs and NPs) release and exceedances could also be evidenced for volatile organic compounds (VOCs), xylene, acrolein, per-/polyfluoroalkyl substances (PFAS), phthalates (including di(2-ethylhexyl)-phthalate, DEHP) and for Pb, Cd, Co, Cu, Sb and TiO2.

DISCUSSION

Of course, masks filter larger dirt and plastic particles and fibers from the air we breathe and have specific indications, but according to our data they also carry risks. Depending on the application, a risk-benefit analysis is necessary.

CONCLUSION

Undoubtedly, mask mandates during the SARS-CoV-2 pandemic have been generating an additional source of potentially harmful exposition to toxins with health threatening and carcinogenic properties at population level with almost zero distance to the airways.

From organic fertilizer to the soils: What happens to the microplastics? A critical review

In recent, soil microplastic pollution arising from organic fertilizers has been of a great increasing concern. In response to this concern, this review presents a comprehensive analysis of the occurrence and evolution of microplastics in organic fertilizers, their ingress into the soil, and the subsequent impacts. Organic fertilizers are primarily derived from solid organic waste generated by anthropocentric activities including urban (daily-life, municipal wastes and sludge), agricultural (manure, straw), and industrial (like food industrial waste etc.) processes. In order to produce organic fertilizer, the organic solid wastes are generally treated by aerobic composting or anaerobic digestion. Currently, microplastics have been widely detected in the raw materials and products of organic fertilizer. During the process of converting organic solid waste materials into fertilizer, intense oxidation, hydrolysis, and microbial actions significantly alter the physical, chemical, and surface biofilm properties of the plastics. After the organic fertilizer application, the abundances of microplastics significantly increased in the soil. Additionally, the degradation of these microplastics often promotes the adsorption of organic pollutants and affects their retention time in the soil. These microplastics, covered by biofilms, also significantly alter soil ecology due to the unique properties of the biofilm. Furthermore, the biofilms also play a role in the degradation of microplastics in the soil environment. This review offers a new perspective on the soil environmental processes involving microplastics from organic fertilizer sources and highlights the challenges associated with further research on organic fertilizers and microplastics.

Atlas and source of the microplastics of male reproductive system in human and mice

Regarding the impact of microplastics (MPs) on the male reproductive system, previous studies have identified a variety of MPs in both human semen and testicular samples. These studies have put forward the hypothesis that small particles can enter the semen through the epididymis and seminal vesicles. Here, we performed qualitative and quantitative analyses of MPs in human testis, semen, and epididymis samples, as well as in testis, epididymis, seminal vesicle, and prostate samples from mice via pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). The goal of this approach was to comprehensively characterize the distribution of MPs within the male reproductive system. Additionally, we aimed to evaluate potential sources of MPs identified in semen, as well as to identify possible sources of overall MP exposure. Our results highlighted a general atlas of MPs in the male reproductive system and suggested that MPs in semen may originate from the epididymis, seminal vesicles, and prostate. An exposure questionnaire, coupled with the characteristics of the MPs detected in the male reproductive system, revealed that high urbanization, home-cooked meals, and using scrub cleansers were important sources of MP exposure in men. These findings may provide novel insights into alleviating the exposure of men to MPs.

Systematic review of microplastics and nanoplastics in indoor and outdoor air: identifying a framework and data needs for quantifying human inhalation exposures

BACKGROUND

Humans are likely exposed to microplastics (MPs) in a variety of places including indoor and outdoor air. Research to better understand how exposure to MPs correlates to health is growing. To fully understand the possible impacts of MPs on human health, it is necessary to quantify MP exposure and identify what critical data gaps exist.

OBJECTIVES

The current paper provides a human exposure assessment of microplastics in the air using systematically reviewed literature that provided concentration of MPs in air as well as doses used in toxicology studies to calculate inhalation exposure dose.

METHODS

All published peer-reviewed journal articles, non-published papers, and grey literature that focused on micro- or nano-plastics in indoor and outdoor air were systematically searched using PRISMA guidelines. Literature that defined specific concentrations and size of MPs in air or exposed to human lung cells, animals, or humans with measurable health impacts were included in data extraction. Inhalational exposures were calculated for different age groups using published MP concentrations from the included literature using exposure dose equations and values from U.S. ATSDR and EPA.

RESULTS

Calculated mean indoor inhalational exposures from passive sampling methods were higher than those calculated from active sampling methods. When comparing indoor and outdoor sampling, calculated inhalation exposures from indoor samples were greater than those from outdoor samples. Inhalation exposures of MPs differed between age groups with infants having the highest calculated dose values for all locations followed by preschool age children, middle-school aged children, pregnant women, adolescents, and non-pregnant adults. MP doses used in toxicology studies produced higher calculated mean inhalational exposures than those from environmental samples.

IMPACT

This study is the first known systematic review of inhalational MP exposure from indoor and outdoor air. It also provides inhalational exposures calculated from previously published environmental samples of MPs as well as from toxicology studies.

Current patterns and trends of microplastic pollution in the marine environment: A bibliometric analysis

Microplastics are pervasive in the natural environment and pose a growing concern for global health. Plastic waste in marine environments has emerged as a global issue, threatening not only marine biota but also human health due to its implications for the food chain. This study aims to discern the patterns and trends of research, specifically on Marine Microplastic Pollution (MMP), based on a bibliometric analysis of scientific publications from 2011 to 2022. The methodology utilized in this study comprises three stages: (a) creating a bibliographical dataset from Scopus by Elsevier and the Web of Science Core Collection by Clarivate Analytics, (b) analyzing current research (trends and patterns) using bibliometric analysis through Biblioshiny tool, and (c) examining themes and subthemes in MMP research (wastewater treatment, plastic ingestion, the Mediterranean Sea, microplastics pollution, microplastics in freshwater, microplastic ingestion, plastic pollution, and microplastic pollution in the marine environment). The findings reveal that during the studied period, the number of MMP publications amounted to 1377 articles, with an average citation per publication of 59.23 and a total citation count of 81,553. The most cited article was published in 2011, and since then, the number of publications on this topic has been increasing steadily. The author count stood at 5478, with 22 trending topics identified from the 1377 published titles. Between 2019 and 2022, the countries contributing most to the publication of MMP articles were China, the United States of America (USA), and the United Kingdom (UK). However, a noticeable shift in the origin of author countries was observed in the 2019-2022 timeframe, transitioning from a dominance by the USA and the UK to a predominance by China. In 2019, there was a substantial increase in the volume of publications addressing the topic of microplastics. The results show that the most prevalent themes and subthemes pertained to MMP in the Mediterranean Sea. The journals with the highest number of MMP articles published were the Marine Pollution Bulletin (253 articles) and Science of the Total Environment (190 articles). The analysis concludes that research on MMP remains prominent and appears to be increasing each year.

Assessment of inhalation exposure to microplastic particles when disposable masks are repeatedly used

Wearing masks to prevent infectious diseases, especially during the COVID-19 pandemic, is common. However, concerns arise about inhalation exposure to microplastics (MPs) when disposable masks are improperly reused. In this study, we assessed whether disposable masks release inhalable MPs when reused in simulated wearing conditions. All experiments were conducted using a controlled test chamber setup with a constant inspiratory flow. Commercially available medical masks with a three-layer material, composition comprising polypropylene (PP in the outer and middle layers) and polyethylene (PE in the inner layer), were used as the test material. Brand-new masks with and without hand rubbing, as well as reused medical masks, were tested. Physical properties (number, size, and shape) and chemical composition (polymers) were identified using various analytical techniques such as fluorescence staining, fluorescence microscopy, and micro-Fourier Transform Infrared Spectroscopy (μFTIR). Scanning Electron Microscopy (SEM) was used to scrutinize the surface structure of reused masks across different layers, elucidating the mechanism behind the MP generation. The findings revealed that brand-new masks subjected to hand rubbing exhibited a higher cumulative count of MPs, averaging approximately 1.5 times more than those without hand rubbing. Fragments remained the predominant shape across all selected size classes among the released MPs from reused masks, primarily through a physical abrasion mechanism, accounting for >90 % of the total MPs. The numbers of PE particles were higher than PP particles, indicating that the inner layer of the mask contributed more inhalable MPs than the middle and outer layers combined. The released MPs from reused masks reached their peak after 8 h of wearing. This implies that regularly replacing masks serves as a preventive measure and mitigates associated health risks of inhalation exposure to MPs.

The release of polypropylene plastic from disposable face masks in different water conditions and their potential toxicity in human cells

Due to their extensive use during and after the COVID-19 pandemic, many disposable face masks are irresponsibly deposited into the water environment, threatening the health of people living nearby. However, the effects of water conditions on the degradation and potential hazards of these masks are generally unclear. This paper entailed the release and cellular toxicity of micro/nano plastics from disposable face masks once discarded in different waters, including soil water, river water, and tap water, with deionized (DI) water as control. At first, polypropylene (PP) was confirmed to be the major component of disposable face masks with Raman and Fourier transform infrared (FTIR) techniques. To monitor the release rate of PP from masks, a silver nanoparticle (AgNP)-based surface-enhanced Raman scattering (SERS) method was established by employing the unique Raman fingerprint of PP at 2882 cm-1. During 30-d incubation in different waters, the release rates of PP, sizes of PP aggregates, length of fibers, and proportions of plastics smaller than 100 nm were in the order of soil water > river water > tap water > DI water. All the obtained PP exhibited significant toxicity in human lung cancer (A549) cells at concentrations of 70 mg/L for 48 h, and the ones obtained in soil water exhibited the most severe damage. Overall, this paper revealed that environmental waters themselves would worsen the adverse effects of disposable face masks, and the key compounds affecting the degradation of masks remain to be clarified. Such information, along with the established methods, could be beneficial in assessing the health risks of disposable face masks in different waters.

The Fate of Microplastics, Derived from Disposable Masks, in Natural Aquatic Environments

This paper mainly reviews the fate of microplastics, released from used face masks, in the water environment. Through previous experiments, the amount of fiber microplastics released from used face masks into aqueous environments was not negligible, with the maximum microplastics releasing amount reaching 10,000 piece·day-1 for each mask. Microplastic derived from these masks often occurred in the shape of polymeric fibers that resulted from the breakage of the chemical bonds in the plastic fibers by the force of water flow. The potential contact forces between microplastics (originating from face masks) with other pollutants, primarily encompass hydrophobic and electrostatic interactions. This critical review paper briefly illustrates the fate of microplastics derived from disposable face masks, further devising effective strategies to mitigate the environmental impact of plastic particle release from the used personal protective equipment.

Surface interaction of vancomycin with polystyrene microplastics and its effect on human serum albumin

Microplastics have a well-documented ability to adsorb various chemicals and contaminants found in the environment. By similar mechanisms, when medicines are stored in plastic packaging, the leaching of plastics into the contents poses the risk of possible toxicity and decreased drug efficacy. The work thus examines the presence of two categories of anthropogenic materials - microplastics (MPs) and medications - with their possible combined effects and fate in biological systems. A study on the kinetics and isotherm of the adsorption of vancomycin hydrochloride on the surface of polystyrene microspheres is performed, and the best-fitting models are obtained respectively as the pseudo-second-order model and the Temkin isotherm. Further, the interaction of each of, the drug, MPs and drug-adsorbed MPs with human serum albumin (HSA), the model protein chosen to validate the potential toxicity in humans, is determined by fluorescence spectroscopy. A thermodynamic analysis of this protein-ligand interaction shows that the process is spontaneous, endothermic and entropically favoured, and that hydrophobic forces operate between the interacting species. An unfolding of HSA is observed, disrupting its functions like the esterase activity. Competitive binding experiments with Warfarin and Ibuprofen as specific site markers on HSA reveal that all the studied ligands bind non-specifically to HSA.

Micro- and nanoplastics in soil: Linking sources to damage on soil ecosystem services in life cycle assessment

Soil ecosystems are crucial for providing vital ecosystem services (ES), and are increasingly pressured by the intensification and expansion of human activities, leading to potentially harmful consequences for their related ES provision. Micro- and nanoplastics (MNPs), associated with releases from various human activities, have become prevalent in various soil ecosystems and pose a global threat. Life Cycle Assessment (LCA), a tool for evaluating environmental performance of product and technology life cycles, has yet to adequately include MNPs-related damage to soil ES, owing to factors like uncertainties in MNPs environmental fate and ecotoxicological effects, and characterizing related damage on soil species loss, functional diversity, and ES. This study aims to address this gap by providing as a first step an overview of the current understanding of MNPs in soil ecosystems and proposing a conceptual approach to link MNPs impacts to soil ES damage. We find that MNPs pervade soil ecosystems worldwide, introduced through various pathways, including wastewater discharge, urban runoff, atmospheric deposition, and degradation of larger plastic debris. MNPs can inflict a range of ecotoxicity effects on soil species, including physical harm, chemical toxicity, and pollutants bioaccumulation. Methods to translate these impacts into damage on ES are under development and typically focus on discrete, yet not fully integrated aspects along the impact-to-damage pathway. We propose a conceptual framework for linking different MNPs effects on soil organisms to damage on soil species loss, functional diversity loss and loss of ES, and elaborate on each link. Proposed underlying approaches include the Threshold Indicator Taxa Analysis (TITAN) for translating ecotoxicological effects associated with MNPs into quantitative measures of soil species diversity damage; trait-based approaches for linking soil species loss to functional diversity loss; and ecological networks and Bayesian Belief Networks for linking functional diversity loss to soil ES damage. With the proposed conceptual framework, our study constitutes a starting point for including the characterization of MNPs-related damage on soil ES in LCA.

Personal protective equipment (PPE) litter in terrestrial urban areas of Iligan City, Philippines

In recent years, many countries have relied on the massive use of personal protective equipment (PPE) following the recommendation of the World Health Organization (WHO) to combat COVID-19, an infectious disease caused by the SARS-CoV-2 virus. These PPEs include facemasks, face shields, disinfectant wipes, and disposable gloves. While PPE serves as protection, it can also be a source of pollution. This study is the first to establish a baseline monitoring and assessment of the spatial distribution of COVID-19-related PPE litter approaching the post-pandemic from the urban areas in Iligan City, Philippines. A total of 1632 COVID-19 PPE litter were gathered in all surveyed locations, predominantly facemasks (90.7%) and disinfectant wipes (8.8%). Among the surveyed areas, the location that recorded the highest count and density of PPE litter is in a residential zone (52.14%; n = 851; 0.0317 item m-2); the lowest was determined in recreational parks (2.57%; n = 42; 0.0016 item m-2). The significant difference in the total count of PPE items in each location could be traced to the varying land uses and ecosystems as well as the human behavior and activities. FTIR results reveal that all types of facemasks sampled are principally made of polypropylene, a material that threatens environmental sustainability and low recyclability. As the country is embracing the new normal and somewhat returning to pre-pandemic activities, this study calls for the prioritization of the government agendas on ecological solid waste management in the country.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

Correlation between use of different type protective facemasks and the oral ecosystem

BACKGROUND

Spread worldwide through droplets, the Virus Sars-Cov-19 has caused a global health emergency alarm. In order to limit its spread, the use of masks has become part of the daily life of the entire population, however, little is known about its constant use and the changes generated in the oral cavity. This work aims to investigate correlations between the continuous use of masks covering the nose and mouth for 3 h and changes in the ecological factors of the oral cavity.

METHODS

34 volunteers were divided into 2 groups: wear only the filtering facepiece code 2 (FFP2) mask (Group A) and wear the FFP2 mask covered by a surgical mask (Group B). Measurement of Volatile Organic Compounds (VOCs), saliva rehydration and consistency test, collection of basal saliva and saliva stimulated with paraffin gum and mucosal swab were collected and analyzed at two times: before using the mask(s) (T0) and 3 h after continuous use of the mask(s) (T1).

RESULTS

The results indicated a significant difference between the groups, in which the basal saliva volume and pH and the peaks of VOCs increased for group B between T0 and T1. The rehydration time decreased and the volume and pH of the stimulated saliva increased, but with no significant difference between the groups. Furthermore, group B showed a significant decrease in Candida albicans Colony Forming Units (CFUs) and Total Bacterial Count (TBC) between T0 and T1.

CONCLUSION

It is concluded that the prolonged use of the FFP2 mask covered by a surgical mask can generate oral alterations in the user.

Non-traditional species sensitivity distribution approaches to analyze hazardous concentrations of microplastics in marine water

Owing to their ubiquitous nature, microplastics are a major environmental concern. This study reviewed the toxicity data of microplastics in marine water, and analyzed their species sensitivity distribution (SSD) curves and hazardous concentrations (HCs). Toxicity database of no-observed effect concentration (NOEC), 50% effect concentration (EC50), and highest observed no-effect concentration (HONEC), and lethal, developing, reproductive, biochemical, and behavioral toxicity endpoints was used. Using 169 chronic NOEC databases, all non-traditional toxicity endpoint databases showed stronger HC values, better fit, and more variable toxicity sensitivity than those derived from traditional values. Moreover, using 426 chronic NOEC, EC50, and HONEC data points, HC values calculated from traditional plus HONEC toxicity values showed weaker HC values, slightly better fit, and more variable toxicity sensitivity than those derived from traditional toxicity values. The SSD approach using non-traditional toxicity and marine water toxicity data can expand the marine water toxicity database, including information on SSD curves and HCs of diverse microplastics.

Revisiting the rationale of mandatory masking

In this perspective, we review the evidence for the efficacy of face masks to reduce the transmission of respiratory viruses, specifically severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), and consider the value of mandating universal mask wearing against the widespread negative impacts that have been associated with such measures. Before the SARS-CoV-2 pandemic, it was considered that there was little to no benefit in healthy people wearing masks as prophylaxis against becoming infected or as unwitting vectors of viral transmission. This accepted policy was hastily reversed early on in the pandemic, when districts and countries throughout the world imposed stringent masking mandates. Now, more than three years since the start of the pandemic, the amassed studies that have investigated the use of masks to reduce transmission of SARS-CoV-2 (or other pathogens) have led to conclusions that are largely inconsistent and contradictory. There is no statistically significant or unambiguous scientific evidence to justify mandatory masking for general, healthy populations with the intention of lessening the viral spread. Even if mask wearing could potentially reduce the transmission of SARS-CoV-2 in individual cases, this needs to be balanced against the physical, psychological and social harms associated with forced mask wearing, not to mention the negative impact of innumerable disposed masks entering our fragile environment. Given the lack of unequivocal scientific proof that masks have any effect on reducing transmission, together with the evident harms to people and the environment through the use of masks, it is our opinion that the mandatory use of face masks in the general population is unjustifiable and must be abandoned in future pandemic countermeasures policies.

Nasal lavage technique reveals regular inhalation exposure of microplastics, not associated from face mask use

During the COVID-19 pandemic, the use of face masks has been a worldwide primary protection measure to contain the spread of the virus. However, very little information is known about the possible inhalation of microplastics (MP) from wearing masks. This pilot study evaluates the presence of MP accumulated in nasal cavities through the nasal lavages technique. Six different commercial face masks were tested in 18 participants during five working days (8 h use/day). Eight different polymers (polystyrene, polyamide, poly(ethylene - propylene) diene monomer, polyester, polyethylene, polyvinylidene fluoride, polypropylene, and polyvinyl chloride) predominantly within the 20-300 µm size were detected in nasal lavages, with an average concentration of 28.3 ± 15.6 MP/5 mL nasal solution. Results demonstrate that MP in the nasal cavity are not associated to face mask use but rather to general exposure to airborne MP. We highlight the use of nasal lavages to evaluate human inhalation of MP and associate it to potential sources and risks.

A Path to a Reduction in Micro and Nanoplastics Pollution

Microplastics (MP) are plastic particles less than 5 mm in size. There are two categories of MP: primary and secondary. Primary or microscopic-sized MP are intentionally produced material. Fragmentation of large plastic debris through physical, chemical, and oxidative processes creates secondary MP, the most abundant type in the environment. Microplastic pollution has become a global environmental problem due to their abundance, poor biodegradability, toxicological properties, and negative impact on aquatic and terrestrial organisms including humans. Plastic debris enters the aquatic environment via direct dumping or uncontrolled land-based sources. While plastic debris slowly degrades into MP, wastewater and stormwater outlets discharge a large amount of MP directly into water bodies. Additionally, stormwater carries MP from sources such as tire wear, artificial turf, fertilizers, and land-applied biosolids. To protect the environment and human health, the entry of MP into the environment must be reduced or eliminated. Source control is one of the best methods available. The existing and growing abundance of MP in the environment requires the use of multiple strategies to combat pollution. These strategies include reducing the usage, public outreach to eliminate littering, reevaluation and use of new wastewater treatment and sludge disposal methods, regulations on macro and MP sources, and a wide implementation of appropriate stormwater management practices such as filtration, bioretention, and wetlands.

Dietary intake of microplastics impairs digestive performance, induces hepatic dysfunction, and shortens lifespan in the annual fish Nothobranchius guentheri

Microplastics (MPs) are ubiquitous in aquatic and terrestrial ecosystem, increasingly becoming a serious concern of human health. Many studies have explored the biological effects of MPs on animal and plant life in recent years. However, information regarding the effects of MPs on aging and lifespan is completely lacking in vertebrate species to date. Here we first confirm the bioavailability of MPs by oral delivery in the annual fish N. guentheri. We then show for the first time that administration of MPs not only shortens the lifespan but also accelerates the development of age-related biomarkers in N. guentheri. We also demonstrate that administration of MPs induces oxidative stress, suppresses antioxidant enzymes, reduces digestive enzymes, and causes hepatic dysfunction. Therefore, we propose that administration of MPs reduces lifespan of N. guentheri via induction of both suppressed antioxidant system and digestive disturbance as well as hepatic damage. Our results also suggest that smaller MPs appear more toxic to digestion, metabolism and growth of animals.

Current knowledge on the presence, biodegradation, and toxicity of discarded face masks in the environment

During the first year of the COVID-19 pandemic, facemasks became mandatory, with a great preference for disposable ones. However, the benefits of face masks for health safety are counteracted by the environmental burden related to their improper disposal. An unprecedented influx of disposable face masks entering the environment has been reported in the last two years of the pandemic, along with their implications in natural environments in terms of their biodegradability, released contaminants and ecotoxicological effects. This critical review addresses several aspects of the current literature regarding the (bio)degradation and (eco)toxicity of face masks related contaminants, identifying uncertainties and research needs that should be addressed in future studies. While it is indisputable that face mask contamination contributes to the already alarming plastic pollution, we are still far from determining its real environmental and ecotoxicological contribution to the issue. The paucity of studies on biodegradation and ecotoxicity of face masks and related contaminants, and the uncertainties and uncontrolled variables involved during experimental procedures, are compromising eventual comparison with conventional plastic debris. Studies on the abundance and composition of face mask-released contaminants (microplastics/fibres/ chemical compounds) under pre- and post-pandemic conditions should, therefore, be encouraged, along with (bio)degradation and ecotoxicity tests considering environmentally relevant settings. To achieve this, methodological strategies should be developed to overcome technical difficulties to quantify and characterise the smallest MPs and fibres, adsorbents, and leachates to increase the environmental relevancy of the experimental conditions.

Radiolabelling and in vivo radionuclide imaging tracking of emerging pollutants in environmental toxicology: A review

Emerging pollutants (EPs) have become a global concern, attracting tremendous attention because of serious threats to human and animal health. EP diversity emanates from their behaviour and ability to enter the body via multiple pathways and exhibit completely different distribution, transport, and excretion. To better understand the in vivo behaviour of EPs, we reviewed radiolabelling and in vivo radionuclide imaging tracking of various EPs, including micro- and nano-plastics, perfluoroalkyl substances, metal oxides, pharmaceutical and personal care products, and so on. Because this accurate and quantitative imaging approach requires the labelling of radionuclides onto EPs, the main strategies for radiolabelling were reviewed, such as synthesis with radioactive precursors, element exchange, proton beam activation, and modification. Spatial and temporal biodistribution of various EPs was summarised in a heat map, revealing that the absorption, transport, and excretion of EPs are markedly related to their type, size, and pathway into the body. These findings implicate the potential toxicity of diverse EPs in organs and tissues. Finally, we discussed the potential and challenges of radionuclide imaging tracking of EPs, which can be considered in future EPs studies.

Role of mangrove forest in interception of microplastics (MPs): Challenges, progress, and prospects

Mangroves receive microplastics (MPs) from terrestrial, marine and atmospheric sources, acting as a huge filter for environmental MPs between land and sea. Due to the high primary production and complex hydrodynamic conditions in mangroves, MPs are extensively intercepted in various ways while flowing through mangroves, leading to a long-standing but fiercely increasing MPs accumulation. However, current researches mainly focused on the occurrence, source and fate of MPs pollution in mangroves, ignoring the role of mangrove forests in the interception of MPs. Our study firstly demonstrates that mangrove ecosystems have significantly greater MPs interception capacity than their surrounding environments. Then, the current status of studies related to the interception of MPs in mangrove ecosystems is comprehensively reviewed, with the main focus on the interception process and mechanisms. At last, the most pressing shortcomings of current research are highlighted regarding the intercepted flux, interception mechanisms, retention time and ecological risks of MPs in mangrove ecosystems and the relevant future perspectives are provided. This review is expected to emphasize the critical role of mangrove forests in the interception of MPs and provide the foundational knowledge for evaluating the MPs interception effect of mangrove forests globally.

Current research trends on cosmetic microplastic pollution and its impacts on the ecosystem: A review

Since the advent of microplastics, it has become a vital component, directly or indirectly, in our daily lives. With advancements in their use, microplastics have become an integral part of personal care, cosmetics, and cleaning products (PCCPs) and emerged as a domestic source of environmental pollution. Over the years, researchers have ascertained the harmful effects of microplastics on the environment. In this context, the assessment and monitoring of microplastics in PCCPs require considerable attention. In addition, it raises concern regarding the need to develop innovative, sustainable, and environmentally safe technologies to combat microplastic pollution. Therefore, this review is an endeavor to uncover the fate, route and degradation mechanism of cosmetic microplastics. In addition, the major technological advancement in cosmetic microplastic removal and the steps directed toward mitigating cosmetic microplastic pollution are also discussed.

Distribution, characteristics, and risk assessments analysis of microplastics in shore sediments and surface water of Moheshkhali channel of Bay of Bengal, Bangladesh

Microplastic pollution in various ecosystems has gained significant attention across the globe. Due to ubiquitous abundance, terrestrial and aquatic ecosystems at regional scales are polluted via uncontrolled anthropogenic actions. Therefore, this study investigates microplastic pollution and distribution in sediments and surface water of the Moheshkhali channel of Bangladesh, Bay of Bengal, along with their shape, size, color, and polymeric analysis. It has been observed that both sediments and surface water are significantly contaminated with microplastics at 14 sediments and 12 surface water sampling sites. 291 particles of microplastic were observed in two quadrants, separated 10-m away from each other, across 14 sediment sampling sites, with average concentrations registered in the range of 6.66 to 138.33 particles/m². At the same time, 163 particles were observed across 12 sampling sites in the surface water, ranging from 0 to ~0.1 particles/m³. Various shapes, like films, fragments, fiber/lines, foams, and pellets (resins), were observed extensively in the Moheshkhali channel. Besides, various risk assessments, like contamination factors, polymeric risk assessment, pollution risk index, and pollution load index, were analyzed for each sampling site across the channel. Pollution load index (PLI) of shore sediments and surface water were 2.51 and 1.67, respectively, indicating significant pollution in the Moheshkhali channel. This research investigation provides insight into anthropogenic activities and baseline microplastic pollution in the Moheshkhali channel of Bangladesh, which helps to prepare robust strategies for conservation and management to deal with such environmental issues.

Warmer water, high light intensity, lithium and microplastics: Dangerous environmental combinations to zooplankton and Global Health?

Nowadays there is a high concern about the combined effects of global warming and emerging environmental contaminants with significant increasing trends of use, such as lithium (Li) and microplastics (MPs), both on wildlife and human health. Therefore, the effects of high light intensity (26,000 lx) or warmer water temperature (25 °C) on the long-term toxicity of Li and mixtures of Li and MPs (Li-MPs mixtures) were investigated using model populations of the freshwater zooplankton species Daphnia magna. Three 21-day bioassays were done in the laboratory at the following water temperatures and light intensities: (i) 20 °C/10830 lx; (ii) 20 °C/26000 lx (high light intensity); (iii) 25 °C/10830 lx (warmer temperature). Based on the 21-day EC50s on reproduction, high light intensity increased the reproductive toxicity of Li and Li-MPs mixtures by ~1.3 fold; warmer temperature increased the toxicity of Li by ~1.2 fold, and the toxicity of Li-MPs mixtures by ~1.4 fold based on the concentration of Li, and by ~2 fold based on the concentrations of MPs. At high light intensity, Li (0.04 mg/L) and Li-MPs mixtures (0.04 Li + 0.09 MPs mg/L) reduced the population fitness by 32 % and 41 %, respectively. Warmer temperature, Li (0.05 mg/L) and Li-MPs mixtures (0.05 Li + 0.09 MPs mg/L) reduced it by 63 % and 71 %, respectively. At warmer temperature or high light intensity, higher concentrations of Li and Li-MPs mixtures lead to population extinction. Based on the population growth rate and using data of bioassays with MPs alone done simultaneously, Li and MPs interactions were antagonistic or synergistic depending on the scenario. High light intensity and chemical stress generally acted synergistically. Warmer temperature and chemical stress always acted synergistically. These findings highlight the threats of long-term exposure to Li and Li-MPs mixtures to freshwater zooplankton and Global Health in a warmer world.

Prospects of TiO2-based photocatalytic degradation of microplastic leachates related disposable facemask, a major COVID-19 waste

COVID-19 is one of the serious catastrophes that have a substantial influence on human health and the environment. Diverse preventive actions were implemented globally to limit its spread and transmission. Personnel protective equipment (PPE) was an important part of these control approaches. But unfortunately, these types of PPE mainly comprise plastics, which sparked challenges in the management of plastic waste. Disposable face masks (DFM) are one of the efficient strategies used across the world to ward off disease transmission. DFMs can contribute to micro and nano plastic pollution as the plastic present in the mask may degrade when exposed to certain environmental conditions. Microplastics (MPs) can enter the food chain and devastate human health. Recognizing the possible environmental risks associated with the inappropriate disposal of masks, it is crucial to avert it from becoming the next plastic crisis. To address this environmental threat, titanium dioxide (TiO2)-based photocatalytic degradation (PCD) of MPs is one of the promising approaches. TiO2-based photocatalysts exhibit excellent plastic degradation potential due to their outstanding photocatalytic ability, cost efficiency, chemical, and thermal stability. In this review, we have discussed the reports on COVID-19 waste generation, the limitation of current waste management techniques, and the environmental impact of MPs leachates from DFMs. Mainly, the prominence of TiO2 in the PCD and the applications of TiO2-based photocatalysts in MPs degradation are the prime highlights of this review. Additionally, various synthesis methods to enhance the photocatalytic performance of TiO2 and the mechanism of PCD are also discussed. Furthermore, current challenges and the future research perspective on the improvement of this approach have been proposed.

Migration of Microplastics and Phthalates from Face Masks to Water

Since the outbreak of COVID-19, face masks have been introduced in the complex strategy of infection prevention and control. Face masks consist of plastic polymers and additives such as phthalates. The aim of this study was to evaluate the migration of microplastics (MP) and phthalates from face masks to water. Four types of masks including FFP2 masks and surgical were studied. Masks were first characterized to determine the different layers and the material used for their fabrication. Then, masks were cut into 20 pieces of 0.5 cm2, including all their layers, placed in water, and the migration of MP and phthalates was evaluated according to the conditions stated in EU Regulation No 10/2011 on plastic materials and articles intended to come into contact with food. For MP, the morphological analysis (shape, dimension, particle count) was performed using a stereomicroscope, while the identification of both masks and MP released was conducted using μ-Fourier-transform infrared spectroscopy (µ-FT-IR). Migration of phthalates was assessed by ultra-high-performance liquid chromatography coupled to triple quadrupole mass spectrometer (UPLC-MS/MS). Face masks analyzed in the present study were made of atactic polypropylene (PP) as stated by the manufacturer. The μ-FT-IR confirmed that PP and polyamide (PA) were released as fragments, while both PP and polyester (PES) were released as fibers. In addition, 4 phthalates were identified at concentrations between 2.34 and 21.0 µg/mask. This study shows that the migration study can be applied to evaluate the potential release of MP and phthalates from face masks to water and could give a hint for the potential impact of their incorrect disposal on the aquatic resources.

Review on invasion of microplastic in our ecosystem and implications

Today the world is going through the "Plastic Age." Nowadays, it is difficult to find a commonly used convenient item that is nonplastic. Plastic production and consumption, thus, increased exponentially and plastic emerged as one of the major concerns for waste management. Recent studies confirmed a faster rate of plastic degradation than previously believed under various conditions (e.g. saltwater, UV, soil interaction) that microplastic has become a new type of health-hazardous pollution source. Much research has been conducted since the discovery of the "Pacific Garbage Patch," and the scope has expanded from marine to soil, groundwater, air, and food chain. This article underwent a substantial amount of literature review to verify the degree of microplastic pollution progression in major pillars of the environment (aqueous, terrestrial, airborne, bio-organism, and human). Multiple kinds of literature indicated a high possibility of vigorous interaction among the pillars that microplastic is not stationary at the point of contamination but travels across the nation (transboundary) and medium (transmedium). Thus, only the waste reduction policy (i.e. production and consumption reduction) would be effective through a single national or local effort, while pollution and contamination management require more of a collective, if not global, approach. For these characteristics, this article proposes two most urgently required actions to combat microplastic pollution: (a) global acknowledgement of microplastic as transboundary and transmedium pollution source that require international collective action and (b) standardization of microplastic related research including basic definition and experimental specification to secure global comparativeness among data analysis. Without resolving these two issues, it could be very difficult to obtain an accurate global status mapping of microplastic pollution to design effective and efficient global microplastic pollution management policies.

Prospect of microplastic pollution control under the "New normal" concept beyond COVID-19 pandemic

Coronavirus disease (COVID-19) has led to increasing demand for single-use plastic which aggravates the already existing plastic waste problem. Not only does the demand for personal protective equipment (PPE) increase, but also people shift their preference to online shopping and food delivery to comply with administrative policies for COVID-19 pandemic control. The used PPEs, packaging materials, and food containers may not be handled or recycled properly after their disposal. As a result, the mismanaged plastic waste is discharged into the environment and it may pose even greater risks after breaking into smaller fragments, which was regarded as the source of secondary microplastics (MPs, < 5 mm) or nanoplastics (NPs, < 1 μm). The main objective of this manuscript is to provide a review of the studies related to microplastic release due to pandemic-associated plastic waste. This study summarizes the limited work published on the ecotoxicological/toxicological effect of MPs/NPs released from PPE on aquatic organisms, soil organisms, as well as humans. Given the current status of research on MPs from COVID-related plastic waste, the immediate research directions needed on this topic were discussed.

Airborne microplastic particle concentrations and characterization in indoor urban microenvironments

Airborne microplastics (MPs) have recently drawn the attention of the scientific community due to their possible human inhalation risk. Indoor environments are of relevance as people spend about 90% of their time indoors. This study evaluated MPs concentrations in three indoor environments: houses, public transport and working places, which are representative of urban life. Sampling involved the collection of airborne particulate matter on nylon 20 μm pore size filters. Samples were first visually inspected, and particles were characterized (colour, length or area). Polymer identification was performed through μFTIR analysis. Working conditions were controlled to guarantee quality assurance and avoid background contamination. Limits of detection, recovery tests and repeatability were performed with home-made polyethylene (PE), polypropylene (PP), and polystyrene (PS) standards. The highest average MP concentrations were found in buses (17.3 ± 2.4 MPs/m³) followed by 5.8 ± 1.9 MPs/m³ in subways, 4.8 ± 1.6 MPs/m³ in houses, and 4.2 ± 1.6 MPs/m³ in the workplaces. Polyamide, PA (51%), polyester PES (48%) and PP (1%) were the polymers identified and most common in personal care products and synthetic textiles. Most of these polymers were below 100 μm in size for both fibres (64 ± 8%) and fragments (78 ± 11%). The frequency of MP particles in our study decreased with increasing size, which points to their potential as an inhalation hazard.

Microplastics from face masks: A potential hazard post Covid-19 pandemic

The tremendous use of plastic products to averse the infection rate during Covid-19 pandemic has developed great pressure on the management and disposal systems of plastic waste. The compulsory use of face masks to curb the infection and prevent transmission of the virus has led to addition of millions of face masks into the terrestrial and marine environment. The current study attempts to assess and quantify the rate of infection in coherence with the annual usage of face masks in various nations across the globe. The ecological footprint of the plastic waste generated from used and discarded face masks along with their potential impacts have also been discussed. The current study has quantified the total annual face masks across thirty-six nations to be more than 1.5 million ton. The total estimated figure for annual plastic waste and microplastics in all these nations was ∼4.2 million tonnes and 9774 thousand tonnes, which emerges as a great threat to the global efforts towards reduction of plastic usage. The emergence of Covid-19 pandemic has modified the living habits with new enterprises being set up for Covid essential products, but the associated hazard of these products has been significantly ignored. Hence this study attempts to present a quantitative baseline database towards interpretation and understanding of the hazards associated with microplastics and increased dependence on plastic products.

Microplastics and their Additives in the Indoor Environment

Analyses of air and house dust have shown that pollution of the indoor environment with microplastics could pose a fundamental hygienic problem. Indoor microplastics can result from abrasion, microplastic beads are frequently added to household products and microplastic granules can be found in artificial turf for sports activities and in synthetic admixtures in equestrian hall litter. In this context, the question arose as to what extent particulate emissions of thermoplastic materials from 3D printing should be at least partially classified as microplastics or nanoplastics. The discussion about textiles as a possible source of indoor microplastics has also been intensified. This Minireview gives an overview of the current exposure of residents to microplastics. Trends can be identified from the results and preventive measures can be derived if necessary. It is recommended that microplastics and their additives be given greater consideration in indoor environmental surveys in the future.

Public face masks wearing during the COVID-19 pandemic: A comprehensive analysis is needed for potential implications

Face mask-wearing as a public health measure has been practiced since the coronavirus 2019 (COVID-19) pandemic outbreak. Extensive research has shown that face masks are an effective non-pharmaceutical measure to contain the spread of respiratory infections. However, recent studies indicate that face masks release microplastics and other contaminants that have adverse health effects on humans. This communication reviews the evidence for face mask as a potential source of contaminants capable of adversely affecting human health. The benefits of face masks in reducing the transmission of SARS-Cov-2 (severe acute respiratory syndrome coronavirus 2) and seasonal communicable diseases were addressed. In addition, the risk of inhaling microplastics and organic contaminants, as well as the associated exposure level, were discussed. Finally, the potential research gaps that need to be addressed were outlined to provide a holistic view of the problem. This communication has illustrated that face mask-wearing as a public health measure to contain the spread of COVID-19 could be a potential risk factor for human health. Very few studies have been done on microplastics, organic pollutants, and trace metal inhalation from surgical masks. However, future work providing a comprehensive understanding of the risk and exposure levels needs to be undertaken.