Application of solar photo-Fenton in raceway pond reactors: A review

Development of an artificial neural network (ANN) for the prediction of a pilot scale mobile wastewater treatment plant performance

Productive activities such as pig farming are a fundamental part of the economy in Mexico. Unfortunately, because of this activity, large quantities of wastewater are generated that have a negative impact in the environment. This work shows an alternative for treating piggery wastewater based on advanced oxidation processes (Fenton and solar photo Fenton, SPF) that have been probed successfully in previous works. In the first stage, Fenton and SPF were carried out on a laboratory scale using a Taguchi L9-type experimental design. From the statistical analysis of this design, the operating parameters: pH, time, hydrogen peroxide concentration [H2O2], and iron ferrous concentration [Fe2+] that maximize the response variables: Chemical Oxygen Demand (COD), Total Organic Carbon (TOC), and color were chosen. From these, a cascade forward neural network was implemented to establish a correlation between data from the variables to the physicochemical parameters to be measure being that a great fit of the data was obtained having a correlation coefficient of 0.99 which permits to optimize the pollutant degradation and predict the removal efficiencies at pilot scale but with a projection to a future industrial scale. A relevant result, it was found that the optimal values for maximizing the removal of physicochemical parameters were pH = 3, time = 60 min, H2O2/COD = 1.5 mg L-1, and H2O2/Fe2+ = 2.5 mg L-1. With these conditions degradation percentages of 91.44%, 47.14%, and 97.89% for COD, TOC, and color were obtained from the Fenton process, while for SPF the degradation percentage increased moderately. From the ANN analysis, the possibility to establish an intelligent system that permits to predict multiple results from operational conditions has been achieved.

Construction of an S-scheme electron transfer channel in Cu0/CuFe2O4 magnetic plate column reactor for the LEV degradation: New strategy of visible Photo-Fenton system application

The complicated loading process and easy falling off of powder catalysts still restrict the wide application of Photo-Fenton technology in practical water treatment. In this study, a magnetic fixed film plate column water treatment equipment is designed as a visible Photo-Fenton reactor to remove levofloxacin (LEV). The effect of magnetic force can ensure that the catalyst is firmly fixed, and the multi-level shallow column plate structure achieves full contact and efficient reaction between the catalyst and wastewater. Simultaneously, the Cu0/CuFe2O4 (STCCF) utilizes Cu0 to construct an S-scheme electron transfer channel, which improves the separation efficiency of photo-generated carriers and provides sufficient photo-generated electrons for the reduction of Fe (Ⅲ) and Cu (Ⅱ). The pseudo-first-order reaction kinetic constant k for the degradation of LEV in the visible Photo-Fenton system is 0.0349 min-1, which is 15.9 times that of the photocatalytic system and 4.8 times that of the Fenton system. After continuous operation for 72 h, the magnetic fixed film plate column reactor can still remove more than 90 % of LEV and 82 % of COD in the secondary effluent of simulated antibiotic pharmaceutical wastewater treatment process, and the effluent is stable and meets the standard. The magnetic fixed film plate column reactor can be used for advanced treatment of antibiotic pharmaceutical wastewater. This study provides a new insight into the application of the Photo-Fenton process.

Advanced oxidation processes for water and wastewater treatment - Guidance for systematic future research

Advanced oxidation processes (AOPs) are a growing research field with a large variety of different process variants and materials being tested at laboratory scale. However, despite extensive research in recent years and decades, many variants have not been transitioned to pilot- and full-scale operation. One major concern are the inconsistent experimental approaches applied across different studies that impede identification, comparison, and upscaling of the most promising AOPs. The aim of this tutorial review is to streamline future studies on the development of new solutions and materials for advanced oxidation by providing guidance for comparable and scalable oxidation experiments. We discuss recent developments in catalytic, ozone-based, radiation-driven, and other AOPs, and outline future perspectives and research needs. Since standardized experimental procedures are not available for most AOPs, we propose basic rules and key parameters for lab-scale evaluation of new AOPs including selection of suitable probe compounds and scavengers for the measurement of (major) reactive species. A two-phase approach to assess new AOP concepts is proposed, consisting of (i) basic research and proof-of-concept (technology readiness levels (TRL) 1-3), followed by (ii) process development in the intended water matrix including a cost comparison with an established process, applying comparable and scalable parameters such as UV fluence or ozone consumption (TRL 3-5). Subsequent demonstration of the new process (TRL 6-7) is briefly discussed, too. Finally, we highlight important research tools for a thorough mechanistic process evaluation and risk assessment including screening for transformation products that should be based on chemical logic and combined with complementary tools (mass balance, chemical calculations).

Solar photo-Fenton and persulphate-based processes for landfill leachate treatment: A critical review

Landfilling is the most usual solid waste management strategy for solid residues disposal. However, it entails several drawbacks such as the generation of landfill leachate that seriously threaten human life and the environment due to their toxicity and carcinogenic character. Among various technologies, solar photo-Fenton and sulphate-based processes have proven to be suitable for the treatment of these polluted streams. This review critically summarises the last three decades of studies in this field. It is found that the solar homogeneous photo-Fenton process should be preferably used as a pre- and post-treatment of biological technologies and as a standalone treatment for young, medium, and mature leachates, respectively. Studies on heterogeneous solar photo-Fenton process are lacking so that this technology may be scaled-up for industrial applications. Sulphate radicals are attractive for removing both COD and ammonia. However, no study has been reported on solar sulphate activation for landfill leachate treatment. This review discusses the main advances and challenges on treating landfill leachate through solar AOPs, it compares solar photo-Fenton and solar persulphate-based treatments, indicates the future research directions and contributes for a better understanding of these technologies towards sustainable treatment of landfill leachate in sunny and not-so-sunny regions.

Simultaneous degradation of contaminants of emerging concern and disinfection by solar photoelectro-Fenton process at circumneutral pH in a solar electrochemical raceway pond reactor

Simultaneous contaminants of emerging concern (CECs) removal and wild microorganisms' inactivation was evaluated by applying solar photoelectro-Fenton (SPEF) process in actual secondary effluent collected from a real municipal wastewater treatment plant (MWWTP). 20 L of a mixture of four CECs was used as model pollutants (200 μg/L of acetaminophen, caffeine, sulfamethazine, and sulfamethoxazole each one). The SPEF process was carried out on fully sunny days, at circumneutral pH using the complex Fe3+-EDDS, in a solar electrochemical - raceway pond reactor (SEC-RPR). Initially, the optimal conditions for CECs degradation were determined using a response surface model based on current density, iron complex concentration and Fe3+-EDDS addition time (to allow previous accumulation of H2O2) as model inputs. A current density of 24.6 mA/cm2, a Fe3+-EDDS complex concentration of 0.089 mM and 3.8 min of previous H2O2 accumulation were the resulting optimum conditions that were afterwards applied for the simultaneous degradation of the CECs synthetic mixture and wild microorganisms inactivation in actual secondary effluent. About 85% CECs removal and complete E. coli inactivation were achieved in 30 min, approximately, while E. faecalis and total coliforms could be inactivated under detection limit in 60 min and 75 min, respectively.

Continuous solar photo-Fenton for wastewater reclamation in operational environment at demonstration scale

For the first time, a continuous flow solar photo-Fenton demonstration plant has been assessed for wastewater reclamation according to the EU 2020/741 regulation. The treated water qualities achieved under two operating strategies (acidic and neutral pH) in a 100-m2 raceway pond reactor were explored in terms of liquid depth, iron source, reagent concentrations, and hydraulic residence time over three consecutive days of operation. The results obtained at acidic pH showed removal percentages of contaminants of emerging concern (CECs) > 75% and water quality classes B, C and D according to EU regulation at both assessed operating conditions, with treatment capacities up to 1.92 m3 m-2 d-1. At neutral pH with ferric nitrilotriacetate (Fe3+-NTA), 50% of CEC removal and only water quality class D were achieved with the most oxidizing condition assessed, giving a treatment capacity of 0.80 m3 m-2 d-1. The treatment capacities obtained in this work, which have never been achieved with solar water treatments, demonstrate the potential of this technology for commercial-scale application.

Chelating agents supported solar photo-Fenton and sunlight/H2O2 processes for pharmaceuticals removal and resistant pathogens inactivation in quaternary treatment for urban wastewater reuse

In this work, Fe³⁺-iminodisuccinic acid (Fe:IDS) based solar photo Fenton (SPF), an Italian patented method, was investigated in quaternary treatment of real urban wastewater and compared to Fe³⁺-ethylenediamine-N,N'-disuccinic acid (Fe:EDDS) for the first time. Three pharmaceuticals (PCs) (sulfamethoxazole, carbamazepine and trimethoprim) and four pathogens (Escherichia coli, somatic and F-plus coliphages, Clostridium perfringens, consistently with the new EU regulation for wastewater reuse (2020/741)), were chosen as target pollutants. SPF with Fe:EDDS was more effective in PCs removal (80%, 10 kJ L^-1) than the SPF with Fe:IDS (58%), possibly due to the higher capability of generating hydroxyl radicals. On the contrary, Fe:IDS was more effective (4.3 log inactivation for E. coli) than Fe:EDDS (1.9 log) in pathogens inactivation, possibly due to a lower iron precipitation and turbidity which finally promoted an improved intracellular photo-Fenton mechanism. Fe:L based SPF was subsequently coupled to sunlight/H₂O₂. Interestingly, while its combination with Fe:EDDS based SPF slightly increased disinfectant efficacy (2.3 vs 1.9 log inactivation for E. coli), the combination with Fe:IDS decreased inactivation efficiency (3.4 vs 4.3 log reduction). In conclusion, due to the good compromise between PCs removal and disinfection efficiency, Fe:IDS SPF alone is an attractive option for quaternary treatment for urban wastewater reuse.

Individual and combined effect of ions species and organic matter on the removal of microcontaminants by Fe3+-EDDS/solar-light activated persulfate

This work is focused on improving the understanding of the complex water matrix interactions occurring during the removal of a microcontaminants mixture (acetamiprid, carbamazepine and caffeine) by solar/Fe³⁺-EDDS/persulfate process. The individual and combined effects of sulfates (100-500 mg/L), nitrates (20-160 mg/L), bicarbonates (77-770 mg/L) and chlorides (300-1500 mg/L) were assessed by comparing the outcomes obtained in different synthetic and actual water matrices. In general, the results showed negligible effects of the different anions on Fe³⁺-EDDS concentration and PS consumption profiles, while the combination of bicarbonates and chlorides seemed to be the key for the MC removal efficiency decrease found when working with complex matrixes. Finally, the influence of dissolved organic matter on process performance was evaluated. It was concluded that there is neither any influence of this variable on Fe³⁺-EDDS concentration and PS consumption profiles. In contrast, there was a general negative effect on MC removal efficiency, which strongly depended on both the concentration and composition of the dissolved organic matter.

New development of a solar electrochemical raceway pond reactor for industrial wastewater treatment

In this work, a solar electrochemical-raceway pond reactor (SEC-RPR) is used to treat textile industrial wastewater by solar photoelectron-Fenton (SPEF) at pilot plant scale for the first time. The SEC-RPR is composed of an electrochemical filter press-cell coupled to RPR, where H₂O₂ is electro-generated. A complete study about experimental variables such as current, catalyst concentration, pollutant load or liquid depth is conducted based on methyl orange removal, mineralization and decolorization. Validation of the SPEF process using SEC-RPR reached more than 80% of mineralization, as well as the complete decolorization of the solution. The good performance of the SPEF treatment in the new SEC-RPR led to quick degradation kinetics, mainly due to the synergetic action of solar radiation and good distribution of H₂O₂ electrogenerated in the photoreactor. 100% Methyl Orange degradation was achieved after 150, 60, 45, 30 and 20 min of reaction time applying current density equal to 5, 10, 20, 40 and 60 mA cm^-2, respectively. However, the increase of current density decreased the mineralization current efficiency. Up to 10 aromatics intermediates and 5 short-chain carboxylic acids were identified by LC-MS and HPLC analysis and a reaction pathway for MO mineralization by SPEF is proposed. This study represents an essential preliminary step towards the development of the first SEC-RPR at demo scale.

Emerging Pollutants in Wastewater, Advanced Oxidation Processes as an Alternative Treatment and Perspectives

Emerging pollutants are present in wastewaters treated by conventional processes. Due to water cycle interactions, these contaminants have been reported in groundwater, surface water, and drinking waters. Since conventional processes cannot guarantee their removal or biotransformation, it is necessary to study processes that comply with complete elimination. The current literature review was conducted to describe and provide an overview of the available information about the most significant groups of emerging pollutants that could potentially be found in the wastewater and the environment. In addition, it describes the main entry and distribution pathways of emerging contaminants into the environment through the water and wastewater cycle, as well as some of the potential effects they may cause to flora, fauna, and humans. Relevant information on the SARS-CoV-2 virus and its potential spread through wastewater is included. Furthermore, it also outlines some of the Advanced Oxidation Processes (AOPs) used for the total or partial emerging pollutants removal, emphasizing the reaction mechanisms and process parameters that need to be considered. As well, some biological processes that, although slow, are effective for the biotransformation of some emerging contaminants and can be used in combination with advanced oxidation processes.