Enhanced struvite generation and separation by magnesium anode electrolysis coupled with cathode electrodeposition

Fate of micropollutants in struvite production from swine wastewater with sacrificial magnesium anode

Struvite recovery shows significant potential for simultaneously recovering nitrogen (N) and phosphorus (P) from swine wastewater but is challenged by the occurrence and transformation of antibiotic residuals. Electrochemically mediated struvite precipitation with sacrificial magnesium anode (EMSP-Mg) is promising due to its automation and chemical-free merits. However, the fate of antibiotics remains underexplored. We investigated the behavior of sulfadiazine (SD), an antibiotic frequently detected but less studied than others within the EMSP-Mg system. Significantly less SD (≤ 5%) was co-precipitated with recovered struvite in EMSP-Mg than conventional chemical struvite precipitation (CSP) processes (15.0 to 50.0%). The reduced SD accumulation in struvite recovered via EMSP was associated with increased pH and electric potential differences, which likely enhanced the electrostatic repulsion between SD and struvite. In contrast, the typical strategies used in enhancing P removal in the EMSP-Mg system, including increasing the Mg/P ratio or the Mg-release rates, have shown negligible effects on SD adsorption. Furthermore, typical coexisting ions (Ca2+, Cl-, and HCO3-) inhibited SD adsorption onto recovered products. These results provide new insights into the interactions between antibiotics and struvite within the EMSP-Mg system, enhancing our understanding of antibiotic migration pathways and aiding the development of novel EMSP processes for cleaner struvite recovery.

Application of physicochemical techniques to the removal of ammonia nitrogen from water: a systematic review

Ammonia nitrogen is a common pollutant in water and soil, known for its biological toxicity and complex removal process. Traditional biological methods for removing ammonia nitrogen are often inefficient, especially under varying temperature conditions. This study reviews physicochemical techniques for the treatment and recovery of ammonia nitrogen from water. Key methods analyzed include ion exchange, adsorption, membrane separation, struvite precipitation, and advanced oxidation processes (AOPs). Findings indicate that these methods not only remove ammonia nitrogen but also allow for nitrogen recovery. Ion exchange, adsorption, and membrane separation are effective in separating ammonia nitrogen, while AOPs generate reactive species for efficient degradation. Struvite precipitation offers dual benefits of removal and resource recovery. Despite their advantages, these methods face challenges such as secondary pollution and high energy consumption. This paper highlights the development principles, current challenges, and future prospects of physicochemical techniques, emphasizing the need for integrated approaches to enhance ammonia nitrogen removal efficiency.

The Simultaneous Efficient Recovery of Ammonia Nitrogen and Phosphate Resources in the Form of Struvite: Optimization and Potential Applications for the Electrochemical Reduction of NO3. Molecules 2024;29:2185. [PMID: 38792046 PMCID: PMC11123745 DOI: 10.3390/molecules29102185] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In response to the need for improvement in the utilization of ammonium-rich solutions after the electrochemical reduction of nitrate (NO3--RR), this study combined phosphorus-containing wastewater and adopted the electrochemical precipitation method for the preparation of struvite (MAP) to simultaneously recover nitrogen and phosphorus resources. At a current density of 5 mA·cm-2 and an initial solution pH of 7.0, the recovery efficiencies for nitrogen and phosphorus can reach 47.15% and 88.66%, respectively. Under various experimental conditions, the generated struvite (MgNH4PO4·6H2O) exhibits a typical long prismatic structure. In solutions containing nitrate and nitrite, the coexisting ions have no significant effect on the final product, struvite. Finally, the characterization of the precipitate product by X-ray diffraction (XRD) revealed that its main component is struvite, with a high purity reaching 93.24%. Overall, this system can effectively recover ammonium nitrogen from the NO3--RR solution system after nitrate reduction, with certain application prospects for the recovery of ammonium nitrogen and phosphate.

Electro-intensified simultaneous decontamination of coexisting pollutants in wastewater

The treatment of wastewater has become increasingly challenging as a result of its growing complexity. To achieve synergistic removal of coexisting pollutants in wastewater, one promising approach involves the integration of electric fields. We conducted a comprehensive literature review to explore the potential of integrating electric fields and developing efficient electro-intensified simultaneous decontamination systems for wastewater containing coexisting pollutants. The review focused on comprehending the applications and mechanisms of these systems, with a particular emphasis on the deliberate utilization of positive and negative charges. After analyzing the advantages, disadvantages, and application efficacy of these systems, we observed electro-intensified systems exhibit flexible potential through their rational combination, allowing for an expanded range of applications in addressing simultaneous decontamination challenges. Unlike the reviews focusing on single elimination, this work aims to provide guidance in addressing the environmental problems resulting from the coexistence of hazardous contaminants.

Comparison study on enhancement of phosphorus recovery from low-strength wastewater treated with different magnesium-based electrochemical constructed wetland

Phosphorus (P) recovery from wastewaters treated with constructed wetlands (CWs) could alleviate the current global P crisis but has not received sufficient attention. In this study, P transformation in different magnesium-based electrochemical CWs, including micro-electrolysis CW (M-CW), primary battery CW (P-CW), and electrolysis CW (E-CW), was thoroughly examined. The results revealed that the P removal efficiency was 53.0%, 75.8%, and 61.9% in the M-CW, E-CW, and P-CW, respectively. P mass balance analysis showed that P electrode deposition was the main reason for the higher P removal in the E-CW and P-CW. Significant differences were found between the E-CW and P-CW, P was distributed primarily on the magnesium plate in the P-CW but was distributed on the carbon plate in the E-CW. The E-CW had excellent P recovery capacity, and struvite was the major P recovery product. More intense magnesium plate corrosion and alkaline environment increased struvite precipitation in the E-CW, with the proportion of 61.6%. The results of functional microbial community analysis revealed that the abundance of electroactive bacteria was positively correlated with the deposition of struvite. This study provided an essential reference for the targeted electrochemical regulation of electric field processes and microorganisms in CWs to enhance P recovery.

Enhancement of struvite generation and anti-fouling in an electro-AnMBR with Mg anode-MF membrane module

Severe membrane fouling and the inability to remove/recover nitrogen and phosphorus are bottlenecks of anaerobic membrane bioreactors (AnMBRs) for large-scale application in wastewater treatment. Herein, an electrochemical AnMBR with a Mg anode-membrane module (electro-AnMBR) was built and showed good performance in terms of membrane fouling mitigation and nutrient recovery during sewage treatment. Compared with the traditional AnMBR, membrane fouling in the electro-AnMBR was reduced by up to 30%. The application of an electric field decreased the zeta potential, viscosity, and EPS concentration of the sludge-water liquor in the electro-AnMBR, which could improve the cake layer structure and thus enhance water permeability. Meanwhile, 26% of NH₄⁺ and 48% of PO₄^3- co-precipitated with Mg²⁺ generating from the sacrificial Mg anode and were recovered as struvite deposited onto cathode in the electro-AnMBR. Hydrogen evolution provided a relatively alkaline pH environment, resulting in struvite electrodeposition on the graphic cathode, which partly separated the formed struvite from the sludge with a purity of 77%. In the electro-AnMBR, the electrochemical reactions provided alkalinity and effectively inhibited anaerobic acidification. The applied voltage of 0.6 V reduced the relative abundance of methanosaeta, but increased that of methanosarcina, which is also beneficial for the membrane anti-fouling.

Enhanced electrochemical precipitation of phosphorus in wastewater by the addition of drifting Corbicula shells

Phosphorus (P) is a finite and essential resource, and its linear movement from mines to waste streams may result in shortages. This has encouraged efforts to recover P from sewage systems for reuse. This study developed a new electrochemical P precipitation system for the subnatant of the sludge flotation thickening process, in which drifting Corbicula shells are added to provide a supply of calcium ions (Ca²⁺) to promote P precipitation. However, adding Corbicula shells to coexisting suspended solids (SS) and coagulant resulted in adsorption of the shells in the neutralized and hydrophobized floc clusters, which limited their electrochemical dissolution. Adding Corbicula shells after SS removal by flotation with electrochemically generated gases resulted in their successful electrochemical dissolution, which enhanced phosphate-P removal. Increasing the amount of Corbicula shells enhanced the phosphate-P removal to a point, after which further addition simply increased Ca²⁺. The consumption of H⁺ generated near the anode for the dissolution of Corbicula shells increased the pH of the bulk solution, which enabled P precipitation not only onto the cathode but also in the bulk solution. Analysis of chemical composition in the generated particles suggests that they can be used as a slow P-release fertilizer and soil conditioner.

Simultaneous Phenol Removal and Resource Recovery from Phenolic Wastewater by Electrocatalytic Hydrogenation

Efficient pollutants removal and simultaneous resource recovery from wastewater are of great significance for sustainable development. In this study, an electrocatalytic hydrogenation (ECH) approach was developed to selectively and rapidly transform phenol to cyclohexanol, which possesses high economic value and low toxicity and can be easily recovered from the aqueous solution. A three-dimensional Ru/TiO₂ electrode with abundant active sites and massive microflow channels was prepared for efficient phenol transformation. A pseudo-first-order rate constant of 0.135 min^-1 was observed for ECH of phenol (1 mM), which was 34-fold higher than that of traditional electrochemical oxidation (EO). Both direct electron transfer and indirect reduction by atomic hydrogen (H*) played pivotal roles in the hydrogenation of phenol ring. The ECH technique also showed excellent performance in a wide pH range of 3-11 and with a high concentration of phenol (10 mM). Moreover, the functional groups (e.g., chloro- and methyl-) on phenol showed little influence on the superiority of the ECH system. This work provides a novel and practical solution for remediation of phenolic wastewater as well as recovery of valuable organic compounds.

Electrochemically mediated precipitation of phosphate minerals for phosphorus removal and recovery: Progress and perspective

Phosphorus (P) is an essential element for the growth and reproduction of organisms. Unfortunately, the natural P cycle has been broken by the overexploitation of P ores and the associated discharge of P into water bodies, which may trigger the eutrophication of water bodies in the short term and possible P shortage soon. Consequently, technologies emerged to recover P from wastewater to mitigate pollution and exploit secondary P resources. Electrochemically induced phosphate precipitation has the merit of achieving P recovery without dosing additional chemicals via creating a localized high pH environment near the cathode. We critically reviewed the development of electrochemically induced precipitation systems toward P removal and recovery over the past ten years. We summarized and discussed the effects of pH, current density, electrode configuration, and water matrix on the performance of electrochemical systems. Next to ortho P, we identified the potential and illustrated the mechanism of electrochemical P removal and recovery from non-ortho P compounds by combined anodic or anode-mediated oxidation and cathodic reduction (precipitation). Furthermore, we assessed the economic feasibility of electrochemical methods and concluded that they are more suitable for treating acidic P-rich waste streams. Despite promising potentials and significant progress in recent years, the application of electrochemical systems toward P recovery at a larger scale requires further research and development. Future work should focus on evaluating the system's performance under long-term operation, developing an automatic process for harvesting P deposits, and performing a detailed economic and life-cycle assessment.