UV-assisted ultrafast construction of robust Fe3O4/polydopamine/Ag Fenton-like catalysts for highly efficient micropollutant decomposition

Environmentally Benign Freeze-dried Biopolymer-Based Cryogels for Textile Wastewater Treatments: A review

Motivated by sustainability and environmental protection, great efforts have been paid towards water purification and attaining complete decolorization and detoxification of polluted water effluent. Textile effluent, the main participant in water pollution, is a complicated mixture of toxic pollutants which seriously impact human health and the entire ecosystem. Developing effective materials for potential removal of the water contaminants is urgent. Recently, cryogels have been applied in wastewater sectors due to their unique physiochemical attributes(e.g. high surface area, lightweight, porosity, swelling-deswelling, and high permeability). These features robustly affected the cryogel's performance, as adsorbent material, particularly in wastewater sectors. This review serves as a detailed reference to the cryogels derived from biopolymers and applied as adsorbents for the purification of textile drainage. We displayed an overview of: the existing contaminants in textile effluents (dyes and heavy metals), their sources, and toxicity; advantages and disadvantages of the most common treatment techniques (biodegradation, advanced chemical oxidation, membrane filtration, coagulation/flocculation, adsorption). A simple background about cryogels (definition, cryogelation technique, significant features as adsorbents, and the adsorption mechanisms) is also discussed. Finally, the bio-based cryogels dependent on biopolymers such as chitosan, xanthan, cellulose, PVA, and PVP, are fully discussed with evaluating their maximum adsorption capacity.

Developing a magnetic SERS nanosensor utilizing aminated Fe-Based MOF for ultrasensitive trace detection of organophosphorus pesticides in apple juice

The unreasonable use of organophosphorus pesticides leads to excessive pesticide residues in food, seriously threatening public health, and the potential of surface-enhanced Raman spectroscopy (SERS) technology, incorporating a metal-organic framework, is substantial for the rapid detection of trace pesticide residues. Here, a novel Fe3O4@NH2-MIL-101(Fe)@Ag (FNMA) SERS nanosensor was developed. Results indicated that the FNMA had a high enhancement factor of 1.53 × 108, a low limit of detection (LOD) of 4.55 × 10-12 M, and a relative standard deviation of 7.73 % for 4-nitrothiophenol, demonstrating its good SERS sensitivity and uniformity, and also possessed good storage stability for one month. In quantifying fenthion and methyl parathion in standard solutions and apple juice in the range of 0.05/0.02-20 mg/L, it showed LODs of 3.02 × 10-3 mg/L and 1.43 × 10-3 mg/L, and 0.0407 and 0.0075 mg/L, respectively, demonstrating potentials in ultrasensitive trace detection of pesticides in food.

Electrocatalysis coupled heterogeneous electro-Fenton like treatment of coal gasification wastewater using tourmaline as catalyst: process parameters and response surface

Coal gasification technology is essential for realizing clean and efficient conversion of coal, as well as for reducing carbon emissions. However, coal gasification technology is accompanied by a large amount of coal gasification wastewater that is biodegradable. In this work, tourmaline was applied as a catalyst in electro-Fenton like process for treating coal gasification wastewater. The optimal applied parameters of coal gasification wastewater were investigated as follows: current density of 90 mA cm-2, tourmaline dosage of 8 g L-1, electrode gap of 1 cm, and temperature at 25 °C; the COD removal ratio reached 91.24% after 240-min treatment. In addition, the current density and tourmaline dosage were further optimized by response surface method. The result was about current density with 82.4 mA cm-2 and catalyst with 7.57 g L-1; the predicted COD removal efficiency was 86.91%. Under the optimal parameters the actual COD removal efficiency was 88.25% a little high than the predicted value. To explore the reusability of tourmaline as Fenton reaction catalyst, five cycles of experiments were carried out. The result demonstrated that tourmaline could be used as catalyst for treating coal gasification wastewater by electro-Fenton like process.

Gum acacia based hydrogels and their composite for waste water treatment: A review

The non-toxic nature of natural polysaccharides and their biodegradability makes them the first choice of researchers. Various natural polysaccharides are available nowadays, like cellulose, starch, chitosan, gum acacia, guar gum etc. Among these, gum acacia is a common natural polysaccharide presently used in research and technology. It is highly biodegradable, pH stable and shows appropriate water solubility. It is used in research to synthesize hydrogels and hydrogel nanocomposites for various applications because of its antimicrobial, anti-inflammatory and excellent absorption properties. The major fields of applications include the stabilization of metal nanoparticles in the form of nanocomposites, wound dressing materials, delivery systems of various drugs and pharmaceutical agents, bioengineering, tissue engineering, purification of water, synthesis of antibacterial and antifungal composites for agricultural improvements, and many others. Due to the increasing problem of water pollution, the major focus is on research helping to reduce this problem. Gum acacia-based hydrogel and hydrogel composites were synthesized and tested for pollutant removal efficiency from wastewater by different researchers. The research on gum acacia hydrogel and their hydrogel composite applications for water purification, as well as their synthesis processes and properties, are summarized in this review article.

Recent progress in magnetic polydopamine composites for pollutant removal in wastewater treatment

Various water pollution issues pose a significant threat to human water safety. Magnetic polydopamine composites (MPCs), which can be separated by magnetic fields after the adsorption process, exhibit outstanding adsorption capacity and heterogeneous catalytic properties, making them promising materials for water treatment applications. In particular, by modifying the polydopamine (PDA) coating, MPCs can acquire enhanced high reactivity, antibacterial properties, and biocompatibility. This also provides an attractive platform for further fabrication of hybrid materials with specific adsorption, catalytic, antibacterial, and water-oil separation capabilities. To systematically provide the background knowledge and recent research advances in MPCs, this paper presents a critical review of MPCs for water treatment in terms of both structure and mechanisms of effect in applications. Firstly, the impact of different PDA positions within the composite structure is investigated to summarize the optimization of properties contributed by PDA when acting as the shell, core, or bridge. The roles of various secondary modifications of magnetic materials by PDA in addressing water pollution problems are explored. It is anticipated that this work will be a stimulus for further research and development of magnetic composite materials with real-world application potential.

A multifunctional recyclable adsorbent based on engineered MIL-125 (Ti) magnetic mesoporous composite for the effective removal of pathogens

The elimination of pathogenic bacteria from water sources is currently crucial for obtaining drinkable water. Therefore, the development of platforms with the ability to interact with pathogens and remove them is a potential future tool for medicine, food and water safety. In this work, we have grafted a layer of NH2-MIL-125 (Ti) on Fe3O4@SiO2 magnetic nanospheres for the removal of multiple pathogenic bacteria from water. The synthesized Fe3O4@SiO2@NH2-MIL-125 (Ti) nano adsorbent was characterized by FE-SEM, HR-TEM, FT-IR, XRD, BET surface analysis, magnetization tests, respectively, which illustrated its well-defined core-shell structure and magnetic behaviour. The prepared magnetic-MOF composite sorbent was attractive towards capturing a wide range of pathogens (S. typhimurium, S. aureus, E. coli, P. aeruginosa and K. pneumoniae) under experimental conditions. Influence factors such as adsorbent dosage, bacterial concentration, pH and incubation time were optimized for enhanced bacterial capture. The application of an external magnetic field removed Fe3O4@SiO2@NH2-MIL-125 (Ti) nano adsorbent from the solution along with sweeping the attached pathogenic bacteria. The non-specific removal efficiency of S. typhimurium for magnetic MOF composite was 96.58%, while it was only 46.81% with Fe3O4@SiO2 particles. For specific removal, 97.58% of S. typhimurium could be removed selectively from a mixture with monoclonal anti- Salmonella antibody conjugated magnetic MOF at a lower concentration of 1.0 mg/mL. The developed nano adsorbent may find great potential in microbiology applications and water remediation.

Waste self-heating bag derived iron-based composite with abundant oxygen vacancies for highly efficient Fenton-like degradation of micropollutants

In this study, iron-rich waste self-heating bag was reutilized as the raw material to prepare oxygen vacancies (OV) functionalized iron-based composite (iron oxide (Fe₃O₄)-carbon-vermiculite, viz. OV-ICV), which exhibited excellent performance in the Fenton-like degradation of micropollutants via peroxydisulfate (PDS) activation. Above 95% of 1.0 mg/L carbaryl (CB) was efficiently eliminated in the presence of 0.1 g/L of OV-ICV and 0.5 mmol/L of PDS over a wide pH range of 3-10 within 30 min. Besides, OV-ICV also showed acceptable adaptability, stability, and renewability. Imbedding OV into Fe₃O₄ structure significantly generated more active iron sites and localized electrons, promoted the charge transfer ability, and assisted the redox cycle of ≡Fe(III)/≡Fe(II) for PDS activation. Mechanism investigation demonstrated that superoxide radicals (O₂^•-) derived from the activation of molecular oxygen mediated the generation of H₂O₂, and both of them further enhanced the formation of more sulfate radicals (SO₄^•-) and hydroxyl radicals (^•OH), which led to the efficient degradation and mineralization of CB. Furthermore, the degradation pathways of CB were proposed based on the intermediates identification. This work lays a foundation for the rational reutilization of iron-containing wastes modified with defect engineering in heterogeneous Fenton-like catalysis for the remediation of micropollutants wastewater.

NIR-induced improvement of catalytic activity and antibacterial performance over AuAg nanorods in Rambutan-like Fe3O4@AgAu@PDA magnetic nanospheres

Pathogenic bacteria and difficult-to-degrade pollutants in water have been serious problems that always plague people. Therefore, finding a "one stone-two birds" method that can quickly catalyze the degradation of pollutants and show effective antibacterial behavior become an urgent requirement. This work reports a facile one-step strategy for fabricating a Rambutan-like Fe₃O₄@AgAu@PDA (Fe₃O₄@AgAu@Polydopamine) core/shell nanosphere with both catalytic and antibacterial activities which can be critically improved by externally applying an NIR laser irradiation (NIR, 808 nm) and a rotating magnetic field. Typically, the Rambutan-like Fe₃O₄@AgAu@PDA nanosphere have a rather rough surface due to the AuAg bimetallic nanorods sandwiched between the Fe₃O₄ core and the PDA shell. Owing to the penetrated PDA shell, AgAu nanorods show high and magnetically recyclable photothermal-enhanced catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol and they can also be applied to initiate TMB oxidation under the help of NIR heating condition. Moreover, Fe₃O₄@AgAu@PDA shows a moderate antibacterial activity due to the weak release of Ag⁺. Under applying a rotating external magnetic field, the rough-surface Fe₃O₄@AgAu@PDA nanospheres produce a controllable magnetolytic force on the bacterial due to their good affinity. As a result, the Fe₃O₄@AgAu@PDA nanospheres show a "magnetolytic-photothermal-Ag⁺" synergistic antibacterial behavior against E. coli and S. aureus.

pH-responsive magnetic Fe3O4/carboxymethyl chitosan/aminated lignosulfonate nanoparticles with uniform size for targeted drug loading

In order to improve the effect of anti-tumor drugs, a magnetic delivery system for targeted drug was reported. Firstly, aminated lignosulfonate (ALS) and carboxymethyl chitosan (CMCS) were used to fabricate nano Fe₃O₄ to obtain pH-responsive magnetic Fe₃O ₄ /CMCS/ALS nanoparticles. Then the nanoparticles were loaded with doxorubicin hydrochloride (DOX), realizing the targeted delivery and controlled release of anti-tumor drugs. It was found that the amount of crosslinking agent and emulsifier were the key factors affecting the morphology and size of the magnetic nanoparticles. Under optimized conditions, the particle size was about 79.9-169.9 nm, exhibiting excellent pH responsiveness. When the drug-to-material ratio was 11:10, the DOX loading rate and the encapsulation rate of the nanoparticles was 48.68 % and 86.23 %. While the Fe₃O₄ /CMCS/ALS-DOX particles could release 63.14 %, 56.71 %, and 14.28 % of DOX at pH 4.0, 5.3, and 7.4, respectively. The results showed that the Fe₃O₄ /CMCS/ALS particles exhibited excellent drug loading and release behavior based on the pH responsiveness, which could be described by Langmuir adsorption model and Fick's law of diffusion respectively. MTT assay and Live/dead staining experiments also showed that the drug-loaded particles had obvious growth inhibition on cancer cells.

Polydopamine-mediated modification of ZIF-8 onto magnetic nanoparticles for enhanced tetracycline adsorption from wastewater

Magnetic nanoparticle materials which could be used to remove tetracycline were confined seriously due to their poor stability and unsatisfactory reusability. Here, we facilely prepared novel zeolitic imidazolate framework-8 (ZIF-8) functionalized magnetic nanoparticles (Fe₃O₄@PDA-ZIF-8) adsorbent utilizing polydopamine as a bond to establish a connection between zeolitic imidazolate framework-8 and Fe₃O₄, which could improve the stability of magnetic nanoparticles and enhance the tetracycline adsorption capacity simultaneously. The prepared nanocomposites were characterized and their TC adsorption abilities under various experiment conditions (contact time, TC initial concentration and pH values) were also investigated. Experimental results proved that the prepared adsorbent showed superior TC adsorption capacities (92.01 mg/g at pH = 7). Further, the adsorption mechanisms were comprehensively studied and the prepared adsorbent showed satisfactory stability and reusability during the cycle experiment. Altogether, our findings provided a feasible way to design and construct functional magnetic MOF materials for enhancing tetracycline adsorption from wastewater.

Rapid degradation of organic pollutants by Fe3O4@PDA/Ag catalyst in advanced oxidation process

Over the past decades, the development of novel catalysts on the degradation of organic pollutants has attracted increasing attention. In this work, we synthesized silver decorated magnetic nanoparticles (Fe₃O₄@PDA/Ag NPs) to activate H₂O₂ for organic pollutants removal via advanced oxidation processes (AOPs). The catalyst was prepared through in-situ reduction of AgNO₃ by the polydopamine (PDA) layer on Fe₃O₄ NPs. Chemiluminescence results obtained from luminol/H₂O₂ system revealed that the catalyst exhibited excellent catalytic effect on the decomposition of H₂O₂ into reactive oxygen species (ROS) and superoxide radical (O₂^-) was mainly responsible for the oxidative degradation. Importantly, the fast evolution frequency of oxygen gas bubbles produced in the reaction of Ag NPs and H₂O₂ could generate vigorous fluid convection and autonomous motion of catalyst when H₂O₂ concentration reached 1%. Additionally, the catalyst can suspend in solution for several minutes. Therefore, by coupling the vigorous motion with slow sedimentation velocity, the catalyst can realize rapid degradation of organic pollutants without external mixing force. The Fe₃O₄@PDA/Ag NPs catalysts not only showed a high removal efficiency of malachite green, but also can be applied for the degradation of other dyes, making it to be a promise candidate for environmental remediation. With the merits of excellent catalytic effect, fast degradation speed, and simplicity of operation, the prepared catalysts exhibits great potential in the practical field.

Effect of Currently Available Nanoparticle Synthesis Routes on Their Biocompatibility with Fibroblast Cell Lines

Nanotechnology has acquired significance in dental applications, but its safety regarding human health is still questionable due to the chemicals utilized during various synthesis procedures. Titanium nanoparticles were produced by three novel routes, including Bacillus subtilis, Cassia fistula and hydrothermal heating, and then characterized for shape, phase state, size, surface roughness, elemental composition, texture and morphology by SEM, TEM, XRD, AFM, DRS, DLS and FTIR. These novel titanium nanoparticles were tested for cytotoxicity through the MTT assay. L929 mouse fibroblast cells were used to test the cytotoxicity of the prepared titanium nanoparticles. Cell suspension of 10% DMEM with 1 × 104 cells was seeded in a 96-well plate and incubated. Titanium nanoparticles were used in a 1 mg/mL concentration. Control (water) and titanium nanoparticles stock solutions were prepared with 28 microliters of MTT dye and poured into each well, incubated at 37 °C for 2 h. Readings were recorded on day 1, day 15, day 31, day 41 and day 51. The results concluded that titanium nanoparticles produced by Bacillus subtilis remained non-cytotoxic because cell viability was >90%. Titanium nanoparticles produced by Cassia fistula revealed mild cytotoxicity on day 1, day 15 and day 31 because cell viability was 60−90%, while moderate cytotoxicity was found at day 41 and day 51, as cell viability was 30−60%. Titanium nanoparticles produced by hydrothermal heating depicted mild cytotoxicity on day 1 and day 15; moderate cytotoxicity on day 31; and severe cytotoxicity on day 41 and day 51 because cell viability was less than 30% (p < 0.001). The current study concluded that novel titanium nanoparticles prepared by Bacillus subtilis were the safest, more sustainable and most biocompatible for future restorative nano-dentistry purposes.

Dispersible CdS1-xSex solid-solution nanocrystal photocatalysts: Photoinduced self-transformation synthesis and enhanced hydrogen-evolution activity

Modulating the electronic structure of Cadmium sulfide (CdS) by non-metallic elements to produce solid-solution photocatalysts serves as a potential route to improve its performance of photocatalytic hydrogen (H₂) evolution. However, exploring an effective synthetic route of CdS-based solid solution is still a great challenge. Herein, the CdS_1-xSe_x solid-solution nanocrystals were successfully synthesized by an accessible photoinduced self-transformation route, including the direct formation of dispersible CdS_1-x(SeS)_x and the in situ self-transformation of selenosulfide ((SeS)^2-) to Se^2- by photoexcited electrons. The prepared CdS_1-xSe_x solid-solution photocatalysts possess a small crystallite size of ca. 5 nm and their bandgaps can be easily tuned in a wide range of 1.84-2.28 eV by tailoring the mole ratio of Se/S. The resultant CdS_0.90Se_0.10 solid-solution photocatalyst realizes the highest H₂-production tempo of 94.6 μmol·h^-1, which is 1.6 folds higher than that of CdS. The experimental and theoretical studies supported that the incorporation of Se atoms could not only narrow the bandgap value to reinforce visible-light absorption, but also tune its electronic structure to optimize interfacial H₂-evolution dynamics, thus achieving an efficient photocatalytic H₂-production rate of the dispersible CdS_1-xSe_x solid solution. This study may deliver advanced inspirations for optimizing the electronic structure of photocatalysts towards sustainable H₂ production.

Recent Advances in Polysaccharide-Based Physical Hydrogels and Their Potential Applications for Biomedical and Wastewater Treatment

Polysaccharides have been widely employed to fabricate hydrogels owing to their intrinsic properties including biocompatibility, biodegradability, sustainability, and easy modification. However, a considerable amount of polysaccharide-based hydrogels are prepared by chemical crosslinking method using organic solvents or toxic crosslinkers. The presence of reaction by-products and residual toxic substances in the obtained materials cause a potential secondary pollution risk and thus severely limited their practical applications. In contrast, polysaccharide-based physical hydrogels are preferred over chemically derived hydrogels and can be used to address existing drawbacks of chemical hydrogels. The polysaccharide chains of such hydrogel are typically crosslinked by dynamic non-covalent bonds, and the co-existence of multiple physical interactions stabilize the hydrogel network. This review focuses on providing a detailed outlook for the design strategies and formation mechanisms of polysaccharide-based physical hydrogels as well as their specific applications in tissue engineering, drug delivery, wound healing, and wastewater treatment. The main preparation principles, future challenges, and potential improvements are also outlined. The authors hope that this review could provide valuable information for the rational fabrication of polysaccharide-based physical hydrogel. The specific research works listed in the review will provide a systematic and solid research basis for the reliable development of polysaccharide-based physical hydrogel. This article is protected by copyright. All rights reserved.

Biogenic Synthesis of Iron Oxide Nanoparticles Using Enterococcus faecalis: Adsorption of Hexavalent Chromium from Aqueous Solution and In Vitro Cytotoxicity Analysis

The biological synthesis of nanoparticles is emerging as a potential method for nanoparticle synthesis due to its non-toxicity and simplicity. In the present study, a bacterium resistant to heavy metals was isolated from a metal-contaminated site and we aimed to report the synthesis of Fe3O4 nanoparticles via co-precipitation using bacterial exopolysaccharides (EPS) derived from Enterococcus faecalis_RMSN6 strains. A three-variable Box-Behnken design was used for determining the optimal conditions of the Fe3O4 NPs synthesis process. The synthesized Fe3O4 NPs were thoroughly characterized through multiple analytical techniques such as XRD, UV-Visible spectroscopy, FTIR spectroscopy and finally SEM analysis to understand the surface morphology. Fe3O4 NPs were then probed for the Cr(VI) ion adsorption studies. The important parameters such as optimization of initial concentration of Cr(VI) ions, effects of contact time, pH of the solution and contact time on quantity of Cr(VI) adsorbed were studied in detail. The maximum adsorption capacity of the nanoparticles was found to be 98.03 mg/g. The nanoparticles could retain up to 73% of their efficiency of chromium removal for up to 5 cycles. Additionally, prepared Fe3O4 NPs in the concentration were subjected to cytotoxicity studies using an MTT assay. The investigations using Fe3O4 NPs displayed a substantial dose-dependent effect on the A594 cells. The research elucidates that the Fe3O4 NPs synthesized from EPS of E. faecalis_RMSN6 can be used for the removal of heavy metal contaminants from wastewater.