Efficient nitrogen removal from leachate by coupling Anammox and sulfur-siderite-driven denitrification

Review of hydraulic conditions optimization for constructed wetlands

Hydraulic conditions exert a comprehensive and vital influence on constructed wetlands (CWs). However, research on this subject is relatively limited. Hydraulic parameters can be categorized into design and operational parameters based on their properties. The design parameters are represented by the hydraulic gradient, substrate porosity, and aspect ratio, while operational parameters are represented by the hydraulic retention time, hydraulic loading rate, and water depth. These parameters directly or indirectly affect the operational lifespan and pollutant removal performance of CWs. Currently, the primary measures for optimizing the hydraulic conditions of CWs involve hydraulic structure and numerical simulation optimization methods. In this review, we aimed to elucidate the impact of hydraulic conditions on CW performance and summarize current optimization strategies. By highlighting the significance of hydraulic parameters in enhancing pollutant removal and extending operational lifespan, this review provides valuable insights for improving CW design and management. The findings will be useful for researchers and practitioners seeking to optimize CW systems and advance the application of nature-based solutions for wastewater treatment.

Effect of sludge redistribution strategy on stability of partial nitrification-anammox process: Further exploration of the potential value of sludge

The stability of the two-stage partial nitrification-anammox (PN/A) system was compromised by the inappropriate conversion of insoluble organic matter. In response, a sludge redistribution strategy was implemented. Through the redistribution of PN sludge and anammox sludge in the two-stage PN/A system, a transition was made to the Anammox-single stage PN/A (A-PN/A) system. This specific functional reorganization, facilitated by the rapid reorganization of microbial communities, has the potential to significantly decrease the current risk of suppression. The results of the study showed that implementing the sludge redistribution strategy led to a substantial enhancement in the total nitrogen removal rate (TNRR) by 87.51%, accompanied by a significant improvement of 34.78% in the chemical oxygen demand removal rate (CRR). Additionally, this approach resulted in a remarkable two-thirds reduction in the aeration requirements. High-throughput sequencing revealed that the strategy enriched anammox and ammonia-oxidizing bacteria while limiting denitrifying bacteria, as confirmed by quantitative polymerase chain reaction analysis. Furthermore, the principal component analysis revealed that the location and duration of aeration had direct and indirect effects on functional gene expression and the evolution of microbial communities. This study emphasizes the potential benefits of restructuring microbial communities through a sludge redistribution strategy, especially in integrated systems that encounter challenges with suppression.

Improving anammox activity and reactor start-up speed by using CO2/NaHCO3 buffer

Anammox bacteria grow slowly and can be affected by large pH fluctuations. Using suitable buffers could make the start-up of anammox reactors easy and rapid. In this study, the effects of three kinds of buffers on the nitrogen removal and growth characteristics of anammox sludge were investigated. Reactors with CO2/NaHCO3 buffer solution (CCBS) performed the best in nitrogen removal, while 4-(2-hydroxyerhyl)piperazine-1-ethanesulfonic acid (HEPES) and phosphate buffer solution (PBS) inhibited the anammox activity. Reactors with 50 mmol/L CCBS could start up in 20 days, showing the specific anammox activity and anammox activity of 1.01±0.10 gN/(gVSS·day) and 0.83±0.06 kgN/(m3·day), respectively. Candidatus Kuenenia was the dominant anammox bacteria, with a relative abundance of 71.8%. Notably, anammox reactors could also start quickly by using 50 mmol/L CCBS under non-strict anaerobic conditions. These findings are meaningful for the quick start-up of engineered anammox reactors and prompt enrichment of anammox bacteria.

Siderite's green revolution: From tailings to an eco-friendly material for the green economy

Siderite, extensively mined as a natural iron mineral, is often discarded as tailings due to the low grade of the ore and due to the high cost of current sorting technologies. Yet, this mineral has demonstrated significant potential in several pivotal areas of the environmental remediation. Siderite not only possesses exceptional adsorption, catalytic, and microbial carrier capabilities but also offers an eco-friendly and cost-effective solution for the environmental pollution management. This article consolidates research advancements and achievements over the past few decades concerning siderite's role in pollution control, delving deeply into its various remediation pathways. Initially, the paper contrasts the performance differences between natural and synthetic siderite, followed by a comprehensive overview of siderite's adsorption mechanisms for various inorganic pollutants. Furthermore, this paper analyzes the unique physicochemical attributes of siderite as both, a reductant and the catalyst, with a special emphasis on its use in the preparation of SCR catalysts and in the catalytic advanced oxidation processes for organic pollutants' degradation. This paper also enumerates and discusses the myriad advantages of siderite as a microbial carrier, thereby enhancing our understanding of biogeochemical cycles and pollutant transformations. In essence, this review systematically elucidates the mechanisms and intrinsic physicochemical properties of siderite in pollution control, paving the way for novel strategies to augment siderite's environmental remediation performance.

Decryption for nitrogen removal in Anammox-based coupled systems: Nitrite-induced mechanisms

This study investigated the effects of NO₂^- on synergetic interactions between Anammox bacteria (AnAOB) and sulfur-oxidizing bacteria (SOB) in an autotrophic denitrification-Anammox system. The presence of NO₂^- (0-75 mg-N/L) was shown to significantly enhance NH₄⁺ and NO₃^- conversion rates, achieving intensified synergy between AnAOB and SOB. However, once NO₂^- exceed a threshold concentration (100 mg-N/L), both NH₄⁺ and NO₃^- conversion rates decreased with increased NO₂^- consumption via autotrophic denitrification. The cooperation between AnAOB and SOB was decoupled due to the NO₂^- inhibition. Improved system reliability and nitrogen removal performance was achieved in a long-term reactor operation with NO₂^- in the influent; reverse transcription-quantitative polymerase chain reaction analysis showed elevated hydrazine synthase gene transcription levels (5.00-fold), comparing to these in the reactor without NO₂^-. This study elucidated the mechanism of NO₂^- induced synergetic interactions between AnAOB and SOB, providing theoretical guidance for engineering applications of Anammox-based coupled systems.

Sustainable nitrogen removal in anammox-mediated systems: Microbial metabolic pathways, operational conditions and mathematical modelling

Anammox-mediated systems have attracted considerable attention as alternative cost-effective technologies for sustainable nitrogen (N) removal from wastewater. This review comprehensively highlights the importance of understanding microbial metabolism in anammox-mediated systems under crucial operation parameters, indicating the potentially wide applications for the sustainable treatment of N-containing wastewater. The partial nitrification-anammox (PN-A), simultaneous PN-A and denitrification (SNAD) processes have demonstrated sustainable N removal from sidestream wastewater. The partial denitrification-anammox (PD-A) and denitrifying anaerobic methane oxidation-anammox (DAMO-A) processes have advanced sustainable N removal efficiency in mainstream wastewater treatment. Moreover, N2O production/emission hotspots are extensively discussed in anammox-based processes and are related to the dominant ammonia-oxidizing bacteria (AOB) and denitrifying heterotrophs. In contrast, N2O is not produced in the metabolism pathways of AnAOB and DAMO-archaea; Moreover, the actual contribution of N2O production by dissimilatory nitrate reduction to ammonium (DNRA) and DAMO-bacteria in their species remains uncertain. Thus, PD-A and DAMO-A processes would achieve reduction in greenhouse gas production, as well as energy consumption for the reliability of N removal efficiencies. In addition to reaction mechanisms, this review covers the mathematical models for simultaneous anammox, partial nitrification and/or denitrification (i.e., PN-A, PD-A, and SNAD). Promising NO3- reduction technologies by endogenous PD, sulfur-driven autotrophic denitrification, and DNRA by anammox are also discussed. In summary, this review provides a better understanding of sustainable N removal in anammox-mediated systems, thereby encouraging future investigation and exploration of the sustainable N bio-treatment from wastewater.

Coupling sulfur-based denitrification with anammox for effective and stable nitrogen removal: A review

Anoxic ammonium oxidation (anammox) is an energy-efficient nitrogen removal process for wastewater treatment. However, the unstable nitrite supply and residual nitrate in the anammox process have limited its wide application. Recent studies have proven coupling of sulfur-based denitrification with anammox (SDA) can achieve an effective nitrogen removal, owing to stable provision of substrate nitrite from the sulfur-based denitrification, thus making its process control more efficient in comparison with that of partial nitrification and anammox process. Meanwhile, the anammox-produced nitrate can be eliminated through sulfur-based denitrification, thereby enhancing SDA's overall nitrogen removal efficiency. Nonetheless, this process is governed by a complex microbial system that involves both complicated sulfur and nitrogen metabolisms as well as multiple interactions among sulfur-oxidising bacteria and anammox bacteria. A comprehensive understanding of the principles of the SDA process is the key to facilitating the development and application of this novel process. Hence, this review is conducted to systematically summarise various findings on the SDA process, including its associated biochemistry, biokinetic reactions, reactor performance, and application. The dominant functional bacteria and microbial interactions in the SDA process are further discussed. Finally, the advantages, challenges, and future research perspectives of SDA are outlined. Overall, this work gives an in-depth insight into the coupling mechanism of SDA and its potential application in biological nitrogen removal.