Transfer of microplastics in sludge upon Fe(II)-persulfate conditioning and mechanical dewatering

Characteristics and aging of microplastics in waste activated sludge under persulfate and hydrothermal co-treatment: Impact of solid content and temperature

Activated persulfate and hydrothermal treatment (HTT) are often employed to treat waste activated sludge, which can improve the efficiency of subsequent sludge treatment and change the distribution of pollutants in the sludge. However, the impact of sludge solid content and temperature on the occurrence and aging of microplastics (MPs) during HTT remains poorly understood. This study investigated the effects of persulfate-HTT (SPS-HTT) co-treatment on the migration, occurrence, and aging of MPs in sludge with different solid contents (2% and 5% solid content). The results indicated that SPS-HTT co-treatment triggers both the disruption of sludge flocs and the melting deformation of MPs at high temperatures, leading to variations in the increasing trend of MP concentration in the solid-liquid phase at different solid contents. 5% solid content sludge showed a weak release of MPs from the solid phase. The proportion of fiber MPs first increased and then decreased with increasing temperature, while no significant changes were observed in the color and type of MPs. Higher temperature and solid content induced the melting deformation of MPs, exacerbated the aging of polypropylene MPs, and resulted in rough surfaces, higher carbonyl index, and variations in crystallinity. Moreover, the correlation between the carbonyl index and aging indicators increased with increasing solid content. The MP-derived dissolved organic matter under HTT primarily comprised soluble microbial by-products and humic acid-like substances. These findings underscore the significance of sludge solid content in affecting the migration and aging of MPs during HTT, and offer novel insights into the application of HTT to MP management in sludge treatment.

A comprehensive review on the source, ingestion route, attachment and toxicity of microplastics/nanoplastics in human systems

Microplastics (MPs)/nanoplastics (NPs) are widely found in the natural environment, including soil, water and the atmosphere, which are essential for human survival. In the recent years, there has been a growing concern about the potential impact of MPs/NPs on human health. Due to the increasing interest in this research and the limited number of studies related to the health effects of MPs/NPs on humans, it is necessary to conduct a systematic assessment and review of their potentially toxic effects on human organs and tissues. Humans can be exposed to microplastics through ingestion, inhalation and dermal contact, however, ingestion and inhalation are considered as the primary routes. The ingested MPs/NPs mainly consist of plastic particles with a particle size ranging from 0.1 to 1 μm, that distribute across various tissues and organs within the body, which in turn have a certain impact on the nine major systems of the human body, especially the digestive system and respiratory system, which are closely related to the intake pathway of MPs/NPs. The harmful effects caused by MPs/NPs primarily occur through potential toxic mechanisms such as induction of oxidative stress, generation of inflammatory responses, alteration of lipid metabolism or energy metabolism or expression of related functional factors. This review can help people to systematically understand the hazards of MPs/NPs and related toxicity mechanisms from the level of nine biological systems. It allows MPs/NPs pollution to be emphasized, and it is also hoped that research on their toxic effects will be strengthened in the future.

Research progress in improving sludge dewaterability: sludge characteristics, chemical conditioning and influencing factors

Sludge from wastewater treatment processes with high water content and large volume has become an inevitable issue in environmental management. Due to the challenging dewatering properties of sludge, current mechanical dewatering methods are no longer sufficient to meet the escalating water content standards of sludge. This paper summarizes the characteristics of various sludge and raises reasons for the their dewaterability differences. Affected by extracellular polymeric substances, biological sludge is hydrophilic and negatively charged, which limits the dewatering degree. The rheological properties, flocs, ionic composition, and solid phase concentration of the sludge also influence the dewatering to some extent. For these factors, the chemical conditioning measures with simple operation and excellent effect improve its dewaterability, which mainly include flocculation/coagulation, acid/alkali treatment, advanced oxidation, surfactant treatment and combined treatment. There is a growing necessity to explore the development of new chemical conditioning agents, even though traditional agents continue to remain widely used. However, the development of these new agents should prioritize finding a balance between various factors such as efficiency, effectiveness, ease of operation, environmental safety, and cost-effectiveness. Electrochemical dewatering enhances solid-liquid separation, and its coupling with chemical conditioning is also an excellent means to further reduce water content. In addition, the improvement of press filter is an effective way, which is influenced by pressure, processing time, sludge cake thickness and pore structure, filter media etc. In general, it is essential to develop new conditioning agents and enhance mechanical filtration press technology based on a thorough understanding of various sludge properties. Concurrently, an in-depth study of the principles of mechanical pressure filtration will contribute to establishing a theoretical foundation for effective deep sludge dewatering and propel further advancements in this field.

Seasonal variations of microplastics in surface water and sediment in an inland river drinking water source in southern China

The aim of this study was to examine microplastic (size distribution of 0.05-5 mm) occurrence and distribution in drinking water source of XJ River during both flooding and dry periods. Surface water and sediment samples were collected from the CS City section of the river in August and December 2020. During the flooding period, microplastic abundances were observed at 0.72-18.6 (7.32 ± 2.36) items L-1 in surface water and 26.3-302 (150 ± 75.6) items kg-1 dry weight (dw) in sediment. In the dry period, abundances were slightly higher at 2.88-17.7 (11.0 ± 3.08) items L-1 and 27.0-651 (249 ± 182) items kg-1 dw, respectively. Microplastics were found in higher concentrations in urban areas and downstream of wastewater treatment plants, suggesting anthropogenic sources. The diversity in shapes, colors, and types of microplastics in surface waters and sediments indicates specialized enrichment processes and persistent sources of microplastic pollution. Approximately 60 % of the microplastic particles identified fall within the 50-100 μm range. Furthermore, a significant correlation was observed between these smaller-sized particles and the overall prevalence of microplastics. Fourier-transform infrared spectroscopy and scanning electron microscopy indicated that the microplastics had been subjected to weathering in the environment, contributing to the production of oxygen-containing functional groups and surface cleavage features. The utilization of energy dispersive spectroscopy revealed the presence of microplastics associated with various heavy metals, highlighting the intricate nature of microplastic pollution. Moreover, the high abundance of microplastics may pose a potential ecological risk to the aquatic environment of the XJ River. The results of this study demonstrate concerning levels of microplastics in the XJ River, despite its status as a high-quality water source.

One-step processing of waste dredged slurry into planting soil by targeted pretreatment and vacuum filtration

A novel method, targeted pretreatment and vacuum filtration (TP-VF), is introduced and validated in this study. TP-VF offers a one-step solution for efficiently dewatering dredged slurry (DS) characterized by heavy metal contamination, high salinity, and excessive moisture content. This innovative approach combines targeted pretreatment (TP) and vacuum filtration (VF) to transform DS into the viable planting soil. TP encompasses a dual optimization strategy that enhances both slurry dewatering efficiency and the quality of the resultant planting soil (cake). By employing flocculation pretreatment, TP increases the size of flocs and enlarges cake pores, leading to improvements in dewatering efficiency and infiltration rates. Additionally, targeted pretreatment results in the discharge of approximately 90% of heavy metal ions and most salts with the filtrate. Remarkably, the addition of chelating agents and freshwater as part of the pretreatment process positively impacts soil quality without compromising floc size or dewatering efficiency. Comparatively, TP-VF demonstrates a substantial reduction of 35.81% in operational costs when contrasted with the traditional two-step process, concurrently diminishing the potential for secondary environmental pollution. This study highlights TP-VF as a promising advancement in sustainable slurry management, addressing pressing environmental challenges while optimizing resource utilization.

Microplastics contamination associated with low-value domestic source organic solid waste: A review

Waste activated sludge and food waste are two typical important domestic low-value organic solid wastes (LOSW). LOSW contains significant organic matter and water content resulting in the transboundary transfer of liquid-solid-gas and other multi-mediums, such that the complexity of microplastics (MPs) migration should be of greater concern. This article provides a review of the literature focusing on the separation and extraction methods of MPs from LOSW. The occurrence and source of MPs are discussed, and the output and impact of MPs on LOSW heat and biological treatments are summarized. The fate and co-effects of MPs and other pollutants in landfills and soils are reviewed. This review highlights the migration and transformation of MPs in domestic source LOSW, and future perspectives focused on the development of a unified extraction and analysis protocol. The objective of this review is to promote the technological development of decontamination of MPs in LOSW by sufficient understanding of the fate of MPs, their interaction with coexisting pollutants and the development of targeted preventive research strategies.

Rapid and efficient removal of organic matter from sewage sludge for extraction of microplastics

Microplastic pollution is recognized as an emerging global issue; however, no standardized method for the extraction of these pollutants from the environment currently exists and existing methods are ineffective for specific environmental matrices. An appropriate organic matter removal method is essential for the extraction of microplastics from organic-rich sludge to minimize interference during their identification and enhance compatibility of the identification steps. The present study aimed to establish an effective technique for the digestion of organic matter-rich sludge using hydrogen peroxide and Fenton's reagent at varying temperatures, times, and concentrations of an iron catalyst. The organic matter removal efficiency of the five protocols utilized varied from 81.5 % to 87.1 %. Polymers such as polyvinyl chloride (PVC), high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS) retained most of their physical and chemical properties after the treatments, with minor changes in the surface area, weight, and FTIR spectra properties. Polyethylene terephthalate (PET), PET fiber, polyamide (PA) fiber, and polymethyl methacrylate (PMMA) fiber were significantly degraded via treating with H₂O₂ at 50 °C for 24 h. Protocol 4, treating with Fenton's reagent (H₂O₂ (30 %) + (0.05 M) FeSO₄.7H₂O) at 50 °C for 1 h is proposed as a rapid and effective method for the removal of organic matter from sludge. In addition to its rapidity, this method minimally impacts most polymers, and its high organic matter removal efficiency is associated with a significant reduction of suspended solids in sludge. The present study provides a validated approach that facilitates as an effective organic removal step during the extraction of MPs in sludge.

Application of Advanced Oxidation Technology in Sludge Conditioning and Dewatering: A Critical Review

Sludge dewatering is an important link in sludge treatment. In practical engineering, the dewatering effect of unconditioned sludge is very poor. The use of advanced oxidation technology can improve sludge dewatering performance, reduce sludge capacity, and remove micro-pollutants, which is beneficial for sludge post-treatment and disposal. Based on the current status of sludge conditioning and dehydration, the characteristics of the advanced oxidation method for sludge dehydration were systematically explained using various free radical reaction mechanisms and dehydration conditions. The effects of various advanced oxidation technologies on sludge conditioning and dewatering has been extensively discussed. Finally, the application prospects of the advanced oxidation technology in sludge conditioning and dewatering are presented.