Mechanisms, toxicity and optimal conditions - research on the removal of benzotriazoles from water using Wolffia arrhiza

Benzotriazoles and bisphenols in wastewater from the food processing industry and the quantitative changes during mechanical/biochemical treatment processes

Benzotriazoles (BTRs) and bisphenols (BPs), categorized as contaminants of emerging concern (CECs), pose significant risks to human health and ecosystems due to their endocrine-disrupting properties and environmental persistence. This study investigates the occurrence and behavior of nine BTRs and ten BPs in wastewater generated in a large-scale meat processing plant, evaluating the effectiveness of a modern mechanical-biological industrial on-site treatment plant in removing these contaminants, and based on the concentration levels from eleven sampling points at different stages of the treatment process. The method used to determine these micropollutants' concentration was ultrasound-assisted emulsification-microextraction for analytes isolation and gas chromatography-mass spectrometry for detection (USAEME-GC/MS). The results indicate that the rigorous quality control processes in the meat processing facility effectively limit the presence of these micropollutants, especially concerning BPs, which are absent or below detection limits in raw wastewater. While the concentrations of some of these micropollutants increased at different points in the treatment process, these values were relatively low, typically below one microgram per liter. Among the compounds analyzed, the only one present after completing the treatment was 5Cl-BTR (maximum concentration: 3007 ng/L), and these contamination levels are around seven times lower than the reference value associated with non-cancer health risk for drinking water. This study contributes to understanding these CECs in industrial wastewater and highlights the importance of effective treatment systems for environmental protection.

Removal of contaminants of emerging concern by Wolffia arrhiza and Lemna minor depending on the process conditions, pollutants concentration, and matrix type

Research was carried out on the removal of a group of six contaminants of emerging concern: bisphenol A, N,N-diethyl-m-toluamide, diethylstilbestrol, triclosan, estrone and estradiol from the water matrix during contact with small floating macrophytes Wolffia arrhiza and Lemna minor. The optimal conditions for the process, such as pH, light exposure per day, and plant mass, were determined using the design of experiments chemometric approach based on central composite design. Experiments conducted under the designated optimal conditions showed that after 7 days, the removal efficiency equals 88-98% in the case of W. arrhiza and 87-97% in the case of L. minor, while after 14 days of the experiment, these values are 93-99.6% and 89-98%, respectively. The primary mechanism responsible for removing CECs is the plant uptake, with the mean uptake rate constant equal to 0.299 day-1 and 0.277 day-1 for W. arrhiza and L. minor, respectively. Experiments conducted using municipal wastewater as a sample matrix showed that the treatment efficiency remains high (the average values 84% and 75%; in the case of raw wastewater, 93% and 89%, and in the case of treated wastewater, for W. arrhiza and L. minor, respectively). Landfill leachate significantly reduces plants' ability to remove pollutants (the average removal efficiency equals 59% and 56%, for W. arrhiza and L. minor, respectively).

Removal of benzotriazole micropollutants using Spirodela polyrhiza (L.) Schleid. And Azolla caroliniana Willd

Phytoremediation of benzotriazoles (BTR) from waters by floating macrophytes is not well understood, but it seems to have the potential to be used in conjunction with conventional wastewater treatment plants. The effectiveness of removing four compounds from the benzotriazole group by floating plants Spirodela polyrhiza (L.) Schleid. And Azolla caroliniana Willd. From the model solution, was studied. The observed decrease in the concentration of studied compounds was in the range 70.5%-94.5% using S. polyrhiza, and from 88.3% to 96.2% for A. caroliniana. It was determined using chemometric methods that the effectiveness of the phytoremediation process is mainly influenced by three parameters: exposure time to light, pH of the model solution and the mass of plants. Using the design of experiments (DoE) chemometric approach, the optimal conditions for removing BTR were selected: plant weight 2.5 g and 2 g, light exposure 16 h and 10 h, and pH 9 and pH 5 for S. polyrhiza and A. caroliniana, respectively. Studies on the mechanisms of BTR removal have shown that the reduction in concentration is mainly due to the process of plant uptake. Toxicity studies have proved that the tested BTR affected the growth of S. polyrhiza and A. caroliniana and induced changes in the levels of chlorophyllides, chlorophylls as well as carotenoids. More dramatic loss in plant biomass and photosynthetic pigment contents was observed in A. caroliniana cultures exposed to BTR.