Silver contamination and its toxicity and risk management in terrestrial and aquatic ecosystems

A novel green synthesis of MnO2-Coal composite for rapid removal of silver and lead from wastewater

The presence of Ag(I) and Pb(II) ions in wastewater poses a significant threat to human health in contemporary times. This study aims to explore the development of a novel and economical adsorbent by grafting MnO2 particles onto low-rank coal, providing an innovative solution for the remediation of water contaminated with silver and lead. The synthesized nanocomposites, referred to as MnO2-Coal, underwent thorough characterization using FTIR, XRD, BET, and SEM to highlight the feasibility of in-situ surface modification of coal with MnO2 nanoparticles. The adsorption of Ag(I) and Pb(II) from their respective aqueous solution onto MnO2-Coal was systematically investigated, with optimization of key parameters such as pH, temperature, initial concentration, contact time, ionic strength, and competing ions. Remarkably adsorption equilibrium was achieved within a 10 min, resulting in impressive removal rates of 80-90 % for both Ag(I) and Pb(II) at pH 6. The experimental data were evaluated using Langmuir, Freundlich, and Temkin isotherm models. The Langmuir isotherm model proved to be more accurate in representing the adsorption of Ag(I) and Pb(II) ions onto MnO2-Coal, exhibiting high regression coefficients (R2 = 0.99) and maximum adsorption capacities of 93.57 and 61.98 mg/g, along with partition coefficients of 4.53 and 71.92 L/g for Ag(I) and Pb(II), respectively, at 293 K. Kinetic assessments employing PFO, PSO, Elovich, and IPD models indicated that the PFO and PSO models were most suitable for adsorption mechanism of Pb(II) and Ag(I) on MnO2-Coal composites, respectively. Moreover, thermodynamic evaluation revealed the spontaneous and endothermic adsorption process for Ag(I), while exothermic behavior for adsorption of Pb(II). Importantly, this approach not only demonstrates cost-effectiveness but also environmental friendliness in treating heavy metal-contamination in water. The research suggests the potential of MnO2-Coal composites as efficient and sustainable adsorbents for water purification applications.

Recovery of Ag(I) from Wastewater by Adsorption: Status and Challenges

Untreated or inadequately treated silver-containing wastewater may pose adverse effects on hu-man health and the ecological environment. Currently, significant progress has been made in the treatment of Ag(I) in wastewater using adsorption methods, with adsorbents playing a pivotal role in this process. This paper provides a systematic review of various adsorbents for the recovery and treatment of Ag(I) in wastewater, including MOFs, COFs, transition metal sulfides, metal oxides, biomass materials, and other polymeric materials. The adsorption mechanisms of these materials for Ag(I) are elaborated upon, along with the challenges currently faced. Furthermore, insights into optimizing adsorbents and developing novel adsorbents are proposed in this study.

Silver nanoparticles in plant health: Physiological response to phytotoxicity and oxidative stress

Silver nanoparticles (AgNPs) have gained significant attention in various fields due to their unique properties, but their release into the environment has raised concerns about their environmental and biological impacts. Silver nanoparticles can enter plants following their exposure to roots or via stomata following foliar exposure. Upon penetrating the plant cells, AgNPs interact with cellular components and alter physiological and biochemical processes. One of the key concerns associated with plant exposure to AgNPs is the potential of these materials to induce oxidative stress. Silver nanoparticles can also suppress plant growth and development by disrupting essential plant physiological processes, such as photosynthesis, nutrient uptake, water transport, and hormonal regulation. In crop plants, these disruptions may, in turn, affect the productivity and quality of the harvested components and therefore represent a potential threat to agricultural productivity and ecosystem stability. Understanding the phytotoxic effects of AgNPs is crucial for assessing their environmental implications and guiding the development of safe nanomaterials. By delving into the phytotoxic effects of AgNPs, this review contributes to the existing knowledge regarding their environmental risks and promotes the advancement of sustainable nanotechnological practices.

Attenuation of photosynthesis in nanosilver-treated Arabidopsis thaliana is inherently linked to the particulate nature of silver

Silver nanoparticles (AgNPs) are known to affect the physiology and morphology of plants in various ways, but the exact mechanism by which they interact with plant cells remains to be elucidated. An unresolved question of silver nanotoxicology is whether the interaction is triggered by the physical features of the particles, or by silver ions leached from their surface. In this study, we germinated and grew Arabidopsis thaliana seedlings in synthetic medium supplemented with sub-morbid concentrations (4 μg/mL) of AgNPs and silver nitrate (AgNO3). This treatment led to in planta accumulation of 106 μg/g and 97 μg/g of silver in the AgNO3- and AgNP-exposed seedlings, respectively. Despite the statistically indistinguishable silver accumulation, RNA sequencing data demonstrated distinct changes in the transcriptome of the AgNP-exposed, but not in the AgNO3-exposed plants. AgNP exposure induced changes in the expression of genes involved in immune response, cell wall organization, photosynthesis and cellular defense against reactive oxygen species. AgNO3 exposure, on the other hand, caused the differential expression of only two genes, neither of which belonged to any AgNP-enriched gene ontology categories. Moreover, AgNP exposure led to a 39% reduction (p < 0.001) in total chlorophyll concentration relative to untreated plants which was associated with a 56.9% and 56.2% drop (p < 0.05) in carbon assimilation rate at ambient and saturating light, respectively. Stomatal conductance was not significantly affected by AgNP exposure, and limitations to carbon assimilation, as determined through analysis of light and carbon dioxide (A/Ci) curves, were attributed to rates of electron transport, maximum carboxylation rates and triose phosphate use. AgNO3-exposure, on the other hand, did not lead to significant reduction either in chlorophyll concentration or in carbon assimilation rate. Given these data, we propose that the impact of AgNPs cannot be simply attributed to the presence of the metal in plants, but is innate to the particulate nature of nanosilver.

Genotoxicity responses of single and mixed exposure to heavy metals (cadmium, silver, and copper) as environmental pollutants in Drosophila melanogaster

Heavy metals are now persistently present in living things' environments, in addition to their potential toxicity. Therefore, the aim of this study was to utilize D. melanogaster to determine the biological effects induced by different heavy metals including cadmium chloride (CdCl2), copper (II) sulfate pentahydrate (CuSO 4.5 H2O), and silver nitrate (AgNO3). In vivo experiments were conducted utilizing three low and environmentally relevant concentrations from 0.01 to 0.5 mM under single and combined exposure scenarios on D. melanogaster larvae. The endpoints measured included viability, reactive oxygen species (ROS) generation and genotoxic effects using Comet assay and the wing-spot test. Results indicated that tested heavy metals were not toxic in the egg-to adult viability. However, combined exposure (CdCl2+AgNO3 and CdCl2+AgNO3+CuSO 4.5 H2O) resulted in significant genotoxic and unfavorable consequences, as well as antagonistic and/or synergistic effects on oxidative damage and genetic damage.

Microfluidics in environmental analysis: advancements, challenges, and future prospects for rapid and efficient monitoring

Microfluidic devices have emerged as advantageous tools for detecting environmental contaminants due to their portability, ease of use, cost-effectiveness, and rapid response capabilities. These devices have wide-ranging applications in environmental monitoring of air, water, and soil matrices, and have also been applied to agricultural monitoring. Although several previous reviews have explored microfluidic devices' utility, this paper presents an up-to-date account of the latest advancements in this field for environmental monitoring, looking back at the past five years. In this review, we discuss devices for prominent contaminants such as heavy metals, pesticides, nutrients, microorganisms, per- and polyfluoroalkyl substances (PFAS), etc. We cover numerous detection methods (electrochemical, colorimetric, fluorescent, etc.) and critically assess the current state of microfluidic devices for environmental monitoring, highlighting both their successes and limitations. Moreover, we propose potential strategies to mitigate these limitations and offer valuable insights into future research and development directions.

Review on fate, transport, toxicity and health risk of nanoparticles in natural ecosystems: Emerging challenges in the modern age and solutions toward a sustainable environment

In today's era, nanoparticles (NPs) have become an integral part of human life, finding extensive applications in various fields of science, pharmacy, medicine, industry, electronics, and communication. The increasing popularity of NP usage worldwide is a testament to their tremendous potential. However, the widespread deployment of NPs unavoidably leads to their release into the environmental matrices, resulting in persistence in ecosystems and bioaccumulation in organisms. Understanding the environmental behavior of NPs poses a significant challenge due to their nanoscale size. Given the current environmental releases of NPs, known negative consequences, and the limited knowledge available for risk management, comprehending the toxicity of NPs in ecosystems is both awaiting and crucial. The present review aims to unravel the potential environmental influences of nano-scaled materials, and provides in-depth inferences of the current knowledge and understanding in this field. The review comprehensively summarizes the sources, fate, transport, toxicity, health risks, and remediation solutions associated with NP pollution in aquatic and soil ecosystems. Furthermore, it addresses the knowledge gaps and outlines further investigation priorities for the sustainable control of NP pollution in these environments. By gaining a holistic understanding of these aspects, we can work toward ensuring the responsible and sustainable use of NPs in today's fast-growing world.

Characteristic features of toxic metal content in hair samples of foreign students at RUDN University from different geographic regions

BACKGROUND

This study explores the regional variations in toxic metal accumulation among RUDN University students from various global regions.

METHODS

This comparative analysis examined hair samples from students hailing from different regions, including Russia, Asia, the Middle East, Africa, and Latin America. The concentrations of Aluminium (Al), Arsenic (As), Cadmium (Cd), Mercury (Hg), Lead (Pb), and Tin (Sn) were measured in the hair samples. The data was then evaluated using regression models to assess the link between the region of residence and toxic metal content in the hair.

RESULTS

The analysis indicated significant regional variations in the levels of toxic metals in the students' hair. The highest content of Al, Cd, and Pb was observed in students from Africa (13.542, 0.028, 0.794 µg/g) and Latin America (9.947, 0.025, 0.435 µg/g). Arsenic levels in students from all regions exceeded that of Russian students by over two-fold. No substantial group differences were found in the Sn content. The regression models suggested that residing in Asia, Africa, and Latin America was a predictor of high Hg levels in hair (0.130, 0.096, 0.227 µg/g). Living in Africa was significantly associated with higher Pb levels (0.794 µg/g), and living in Latin America was close to significantly associated with the Cd level in the hair (0.025 µg/g).

CONCLUSION

This study confirmed an increased accumulation of toxic metals, especially Hg, Cd, and Pb, in students primarily from Latin America and Africa. The findings highlighted the importance of understanding the regional variations in toxic metal accumulation to address associated health risks and the potential impact on students' well-being and academic performance. These insights may guide the development of targeted interventions to reduce exposure to toxic metals in students from various regions around the world.

Contaminant containment for sustainable remediation of persistent contaminants in soil and groundwater

Contaminant containment measures are often necessary to prevent or minimize offsite movement of contaminated materials for disposal or other purposes when they can be buried or left in place due to extensive subsurface contamination. These measures can include physical, chemical, and biological technologies such as impermeable and permeable barriers, stabilization and solidification, and phytostabilization. Contaminant containment is advantageous because it can stop contaminant plumes from migrating further and allow for pollutant reduction at sites where the source is inaccessible or cannot be removed. Moreover, unlike other options, contaminant containment measures do not require the excavation of contaminated substrates. However, contaminant containment measures require regular inspections to monitor for contaminant mobilization and migration. This review critically evaluates the sources of persistent contaminants, the different approaches to contaminant remediation, and the various physical-chemical-biological processes of contaminant containment. Additionally, the review provides case studies of contaminant containment operations under real or simulated field conditions. In summary, contaminant containment measures are essential for preventing further contamination and reducing risks to public health and the environment. While periodic monitoring is necessary, the benefits of contaminant containment make it a valuable remediation option when other methods are not feasible.