Developing aerogel surfaces via switchable-hydrophilicity tertiary amidine coating for improved oil recovery

Development of a superhydrophobic and superoleophilic halloysite nanotube/phenyltriethoxysilane-coated melamine sponge sorbent material with high performance in supercritical CO2 atmosphere for the selective and effective oil spill cleanup and oil-water separation

In this study, activated halloysite nanotube (HNT) and phenyltriethoxysilane (PTES) were utilized for the first time to fabricate modified HNT materials and coat them onto melamine sponge (MS) substrate in the supercritical carbon dioxide (scCO2) atmosphere. The successful coating of MS substrate was confirmed using SEM, EDS, XPS, and contact angle measurements. The drainage technique applied in the CO2 medium achieved the uniform coating of both the inner and outer surfaces of the MS. Water and oil contact angles of the fabricated sorbent material (MS-PTES) were measured as 167.1° and 0°, respectively. MS-PTES sorbent having superhydrophobic and superoleophilic properties demonstrated sorption capacities ranging from 47.6 g/g to 132.2 g/g for 13 different pollutants, including various petroleum products, oils, and organic solvents. Moreover, the MS-PTES sorbent material showed outstanding separation efficiency (99.99%) for the diesel-water mixture using a continuous separation process. It also displayed high selectivity for oil and organic solvent pollutants under acidic, saline, and alkaline conditions, along with excellent reusability, chemical stability, robustness, and mechanical flexibility. MS sorbent material coated with HNT-modified PTES nanoparticles, produced in the scCO2 atmosphere using the drainage technique, represents a promising solution for the removal of petroleum derivatives, oils, and organic solvents from water.

Development of a spiropyran-assisted cellulose aerogel with switchable wettability as oil sorbent for oil spill cleanup

This research presents the successful development and optimization of a spiropyran-assisted cellulose aerogel (CNF-SP) aerogel with UV-induced switchable wettability, and the evaluation of its performance as an effective oil sorbent for oil spill cleanup. The aerogel initially exhibited strong hydrophobicity (124°) and showed UV-induced switchable wettability due to the photo-response structure of spiropyran. Upon UV irradiation, the hydrophobicity of the aerogel could be switched to hydrophilicity (31°), while visible light irradiation could restore its hydrophobicity. The three-dimensional (3D) porous structure of the CNF-SP aerogel combined with the hydrophobic properties of spiropyranol led to its great oil adsorption performance (27-30 g/g of oil adsorption ratio). The central composite design (CCD) was applied to optimize the aerogel and investigate the effects of raw material ratio (i.e., carboxymethyl cellulose, carboxyethyl spiropyran, polyvinyl alcohol, and nano zinc oxide) on the oil sorption performance of the aerogel. The optimized CNF-SP aerogel demonstrated a high oil sorption efficiency, particularly in acid and cold environments. Moreover, the switchable function indicated that the aerogel exhibited reusability and renewability, with the added benefit of UV-induced oil recovery.

Near-Infrared Light Responsive Surface with Switchable Wettability in Microstructure and Surface Chemistry

Intelligent surfaces with reversibly switchable wettability have recently drawn considerable attention. One typical strategy to obtain such a surface is to change the surface chemistry or the microstructure. Herein, we report a new smart surface for which the wettability was controlled by both the surface chemistry and microstructure. Various wetting states were reversibly and precisely controlled through heating, pressing, NIR irradiation, and oxygen plasma treatment. The excellent shape memory characteristics of shape memory polyurethane (SMPU) and the controlled release of hydrophobic/hydrophilic oxygen-containing functional groups contributed to this ability. Microcapsules were used to design these smart surfaces. They controlled the release of a fluorinated alkyl silane (FAS) through shell melting, changed the surface composition, and played a decisive role in protecting the FAS against hydrolysis and evaporation to ensure that the surface's wettability is recyclable. Controlling of the surface chemistry or microstructure was repeated for at least 19 or 16 cycles, respectively, which indicated excellent repeatability compared to other smart surfaces. Based on the excellent controllability, the surface exhibited multiple functions, such as liquid directional transport and coefficient of friction control. In addition, it maintained this extraordinary ability under harsh environments owing to the great stability of the SMPU and adequate protection of the FAS by the microcapsules. With switchable wettability based on the surface chemistry and microstructure, this work provides a new principle for designing smart surfaces with wettability controlled in two ways.