Microbial community structure and functional prediction in five full-scale industrial park wastewater treatment plants

Pure water and resource recovery from municipal wastewater using high-rate activated sludge, reverse osmosis, and mainstream anammox: A pilot scale study

In response to the escalating global water scarcity and the high energy consumption associated with traditional wastewater treatment plants, there is a growing demand for transformative wastewater treatment processes that promise greater efficiency and sustainability. This study presents an innovative approach for municipal wastewater treatment that integrates high-rate activated sludge with membrane bio-reactor (HRAS-MBR), reverse osmosis (RO) and partial nitrification-anammox (PN/A). With an influent of 8.4 m³/d, the HRAS-MBR demonstrated a removal efficiency of approximately 85 % for chemical oxygen demand (COD), with over 70 % of it being recovered for energy production. The RO system achieved a recovery rate of 75 % for the influent, producing pure water with an electrical conductivity of 50 μS/cm. Concurrently, it concentrated ammonia, thereby enhancing the effectiveness of the PN/A process for nitrogen removal in the mainstream, resulting in a removal efficiency exceeding 85 %. Notably, the HRAS-MBR achieved significant phosphorus removal without chemical additives, attributed to the presence of influent calcium and magnesium ions. Overall, this integrated system reduced the net energy consumption for reclaimed water production by about 26 % compared to conventional methods. Additionally, the new process produced a revenue of 0.75 CNY/m³, demonstrating considerable economic and environmental benefits. This pilot-scale study offers a viable alternative for wastewater treatment and water reuse in water-scarce regions, contributing to sustainable water resource management.

Potential effects of Cu2+ stress on nitrogen removal performance, microbial characteristics, and metabolism pathways of biofilm reactor

Sequencing batch biofilm reactors (SBBR) were utilized to investigate the impact of Cu2+ on nitrogen (N) removal and microbial characteristics. The result indicated that the low concentration of Cu2+ (0.5 mg L-1) facilitated the removal of ammonia nitrogen (NH4+-N), total nitrogen (TN), nitrate nitrogen (NO3--N), and chemical oxygen demand (COD). In comparison to the average effluent concentration of the control group, the average effluent concentrations of NH4+-N, NO3--N, COD, and TN were found to decrease by 40.53%, 17.02%, 10.73%, and 15.86%, respectively. Conversely, the high concentration of Cu2+ (5 mg L-1) resulted in an increase of 94.27%, 55.47%, 22.22%, and 14.23% in the aforementioned parameters, compared to the control group. Low concentrations of Cu2+ increased the abundance of nitrifying bacteria (Rhodanobacter, unclassified-o-Sacharimonadales), denitrifying bacteria (Thermomonas, Comamonas), denitrification-associated genes (hao, nosZ, norC, nffA, nirB, nick, and nifD), and heavy-metal-resistant genes related to Cu2+ (pcoB, cutM, cutC, pcoA, copZ) to promote nitrification and denitrification. Conversely, high concentration Cu2+ hindered the interspecies relationship among denitrifying bacteria genera, nitrifying bacteria genera, and other genera, reducing denitrification and nitrification efficiency. Cu2+ involved in the N and tricarboxylic acid (TCA) cycles, as evidenced by changes in the abundance of key enzymes, such as (EC:1.7.99.1), (EC:1.7.2.4), and (EC:1.1.1.42), which initially increased and then decreased with varying concentrations of Cu2+. Conversely, the abundance of EC1.7.2.1, associated with the accumulation of nitrite nitrogen (NO2--N), gradually declined. These findings provided insights into the impact of Cu2+ on biological N removal.

Deep insights into the assembly mechanisms, co-occurrence patterns, and functional roles of microbial community in wastewater treatment plants

The understanding of activated sludge microbial status and roles is imperative for improving and enhancing the performance of wastewater treatment plants (WWTPs). In this study, we conducted a deep analysis of activated sludge microbial communities across five compartments (inflow, effluent, and aerobic, anoxic, anaerobic tanks) over temporal scales, employing high-throughput sequencing of 16S rRNA amplicons and metagenome data. Clearly discernible seasonal patterns, exhibiting cyclic variations, were observed in microbial diversity, assembly, co-occurrence network, and metabolic functions. Notably, summer samples exhibited higher α-diversity and were distinctly separated from winter samples. Our analysis revealed that microbial community assembly is influenced by both stochastic processes (66%) and deterministic processes (34%), with winter samples demonstrating more random assembly compared to summer. Co-occurrence patterns were predominantly mutualistic, with over 96% positive correlations, and summer networks were more organized than those in winter. These variations were significantly correlated with temperature, total phosphorus and sludge volume index. However, no significant differences were found among microbial community across five compartments in terms of β diversity. A core community of keystone taxa was identified, playing key roles in eight nitrogen and eleven phosphorus cycling pathways. Understanding the assembly mechanisms, co-occurrence patterns, and functional roles of microbial communities is essential for the design and optimization of biotechnological treatment processes in WWTPs.

From kitchen to crop: The efficacy and safety of the microbial consortium treated dishwasher wastewater for the Zero Mile system

A microbial consortium, based on the functional integration of photosynthetic and heterotrophic microorganisms, is the core of the Zero Mile System. This system is designed for reusing and upcycling household greywaters, a still untapped water resource. The previous challenges of dishwasher wastewater bioremediation demonstrated the capability of an ad hoc consortium (including a photosynthetic cyanobacterium and three heterotrophic bacterial isolates from dishwasher wastewater) to reclaim the wastewater at small/medium scale. In this study the wastewater treatment demonstrated to be effective in nutrient recycling and upcycling at a larger scale, i.e. 4 L (in three replicates to treat the total amount of wastewater discharged by the dishwasher), by removing high percentage of N and P from the wastewater (70% nitrogen, 50% phosphorous, respectively). Again, the reclaimed wastewater successfully fertilized lettuce plants both indoor (in the Zero Mile System demonstrator) and outdoor (in open field). Plants showed a significant higher biomass productivity in fresh weight compared to control plants and comparable or better values of the pigments and quality indices (e.g., soluble solids, total phenols, total flavonoids). Furthermore, the safety of the reclaimed wastewater is demonstrated by the analysis of the metabolic/ecologically relevant functions of the microbial communities in both untreated and treated wastewater. Colonizers were mainly organic matter degraders and bacteria involved in nitrogen cycling. The human related genera are quite few and no pathogens or potential microbiological contaminants of water bodies (as E. coli), were found. Hence, the utilization of treated dishwasher wastewater does not imply biological risks to agricultural products, soil, or groundwater.

Hydrochemical and microbial community characteristics and the sources of inorganic nitrogen in groundwater from different aquifers in Zhanjiang, Guangdong Province, China

Groundwater from different aquifers in the Zhanjiang area suffers from different degrees of nitrogen pollution, which poses a serious threat to the health of urban and rural residents as well as the surrounding aquatic ecological environment. However, neither the water chemistry and microbial community characteristics in different aquifer media nor the sources of inorganic nitrogen pollution have been extensively studied. This study integrated water quality parameters, dual isotopes (δ15N-NO3- and δ18O-NO3-), and 16S rRNA data to clarify the hydrochemical and microbial characteristics of loose rock pore water (LRPW), layered bedrock fissure water (LBFW), and volcanic rock pore fissure water (VRPFW) in the Zhanjiang area and to determine inorganic nitrogen pollution and sources. The results show that the hydrochemistry of groundwater in different aquifers is complex and diverse, which is mainly affected by rock weathering and atmospheric precipitation, and the cation exchange is strong. High NO3- concentration reduces the richness of the microbial community (VRPFW). There are a large number of bacteria related to nitrogen (N) cycle in groundwater and nitrification dominated the N transformation. A quarter of the samples exceeded the relevant inorganic nitrogen index limits specified in the drinking water standard for China. The NO3- content is highest in VRPFW and the NH4+ content is highest in shallow loose rock pore water (SLRPW). In general, NO3-/Cl-, dual isotope (δ15N-NO3- and δ18O-NO3-) data and MixSIAR quantitative results indicate manure and sewage (M&S) and soil organic nitrogen (SON) are the main sources of NO3-. In LRPW, as the depth increases, the contribution rate of M&S gradually decreases, and the contribution rate of SON gradually increases. The results of uncertainty analysis show that the UI90 values of SON and M&S are higher. This study provides a scientific basis for local relevant departments to address inorganic nitrogen pollution in groundwater.

Differences in greenhouse gas emissions and microbial communities between underground and conventionally constructed wastewater treatment plants

Large quantities of greenhouse gases (GHGs) are emitted into the atmosphere during wastewater treatment. In this study, GHG and microbial samples were collected from four wastewater treatment plants (WWTPs), and their differences and relationships were assessed. The study showed that, compared with conventionally constructed WWTPs, well-established gas collection systems in underground WWTPs facilitate comprehensive collection and accurate accounting of GHGs. In aboveground WWTPs, capped anoxic ponds promote methane production releasing it at 2-8 times the rate of uncapped emissions, in contrast to nitrous oxide emissions. Moreover, a stable subsurface environment allows for smaller fluctuations in daily GHG emissions and higher microbial diversity and abundance. This study highlights differences in GHG emission fluxes and microbial communities in differently constructed WWTPs, which are useful for control and accurate accounting of GHG emissions.