The influence of resin infiltration system on enamel microhardness and surface roughness: An in vitro study

A Comparative In Vitro Physicochemical Analysis of Resin Infiltrants Doped With Bioactive Glasses

Objective This study aimed to investigate the longevity and effectiveness of bioactive glass (BAG)-based dental resin infiltrants. Materials and methods The three types of BAG - 45S5 bioglass (RIS), boron-substituted (RIB), and fluoride-substituted (RIF) - were incorporated with photoinitiated dimethacrylate monomers to create experimental resin infiltrants. ICON® (CN; DMG-America, Ridgefield Park, NJ) and pure resin (PR) were used as control groups in this study. Disc-shaped samples were prepared for the experimental and control groups. The samples were challenged with the pH cycle and immersed in the artificial saliva for 30 days. On Day 0 and Day 30, the pH cycle and artificial saliva immersion, Vicker's microhardness, surface roughness, and surface morphology were investigated. Results The RIF group's disc samples showed the highest Vicker's microhardness values (78.20 ±0.06) on Day 30 of artificial saliva immersion, whereas the CN group's values were the lowest (55.99 ±0.24). Following the pH cycling, the RIF displayed the highest hardness (64.15 ±1.89) whereas the CN group's values were the lowest (33.47 ±1.28). Regarding surface roughness, on Day 30, the RIB resin group exhibited the highest (1.14 ±0.001 µm). In contrast, the CN resin showed the lowest (1.07 ±0.06 µm) values, while immersed in the artificial saliva solution. In the same duration of time, in the pH cycling solution, PR showed the least (0.85 ±0.89 µm), while RIF showed the highest roughness value (0.94 ±0.54 µm). Morphological analysis revealed that following the artificial saliva immersion, the RIB, CN, and PR exhibited smoother surfaces compared to the RIS and RIF groups. However, when immersed in the pH cycling solution, RIB and RIF showed more resistance against acid attack. Conclusions Our results revealed that the experimental resin groups performed much better than the commercial resin infiltrants following artificial saliva and pH cycling challenges.

Surface topography and spectrophotometric assessment of white spot lesions restored with nano-hydroxyapatite-containing universal adhesive resin: an in-vitro study

BACKGROUND

White spot lesion (WSL) is a main shortcoming accompanied by orthodontic treatment. It impairs the esthetic, surface hardness, and surface texture of enamel. So, this study was conducted to analyze the surface characteristics and color change of white spot lesions treated with nano-hydroxyapatite (nHA)-enriched universal adhesive resin.

MATERIALS AND METHODS

Eighty sound human permanent molars crowns were sectioned into two halves, producing 160 specimens. 16 specimens were left untreated, and 144 specimens were artificially-demineralized to generate WSLs. The specimens were classified according to the treatment approach applied as follows: I; Sound enamel, Group II; artificially-created WSLs, Group III; ICON resin-restored WSLs, Group IV; Universal adhesive resin-restored WSLs, Group V; 0.5 wt% nHA-containing universal adhesive resin-restored WSLs, Group VI; 1 wt% nHA-containing universal adhesive resin- restored WSLs, and Group VII; 3 wt% nHA-containing universal adhesive resin-restored WSLs, Group VIII; 5 wt% nHA-containing universal adhesive resin-restored WSLs, Group IX; 7 wt% nHA-containing universal adhesive resin-restored WSLs, and Group X; 10 wt% nHA-containing universal adhesive resin-restored WSLs. Some surface characteristics and color changes were assessed. Data was collected and analyzed statistically using ANOVA and the Tukey test at p < 0.05.

RESULTS

Surface microhardness of WSLs was significantly improved with all investigated ratios of nHA-containing universal adhesive (p < 0.0001), with the highest mean belonging to 10 wt% nHA-containing universal adhesive resin treated WSLs. All ratios of nHA-containing universal adhesive resin significantly reduced the surface roughness of WSLs (p < 0.0001). The investigated ratios of 1, 3, 5, 7, and 10 wt% nHA-containing universal adhesive resin treatment approach could mask the WSLs significantly (p < 0.0001).

CONCLUSIONS

Nano-hydroxyapatite-containing universal adhesive is a promising contemporary approach for the management of WSLs, coupled both the remineralizing concept and the minimally invasive resin infiltration.

Microhardness and surface roughness of resin infiltrated bleached enamel surface using atomic force microscopy: An in vitro study

to evaluate the microhardness (VHN) and surface roughness (Ra) of human enamel surface treated with resin infiltration followed by in office bleaching and to study the effect of artificial saliva (AS) storage time on the VHN and Ra of resin infiltrated enamel. Materials and methods: Eighty enamel specimens were prepared from extracted human premolar teeth. Specimens were divided into two main groups (I and II) then, they were demineralized to create white spot lesions (WSLs). Group I was divided into A and B sub groups. Group A was treated with in office bleaching material while for group B, resin infiltration (Icon) was applied after 24 h storage in AS followed by bleaching. Group II was divided into (C and D). Group C was treated like group B. Specimens in group D were stored in AS for 14 d after treatment with Icon and before application of bleaching. Atomic force microscopy (AFM) Ra analysis and VHN calculation were done. Independent T Test was used to compare between groups at P < 0.05. Results: Group B demonstrated a significant increase in VHN compared with group A. Storage time in AS showed no significant difference on VHN or Ra between groups. Conclusion: Application of resin infiltration before bleaching significantly increased VHN and slightly improved Ra of WSLs compared with bleaching alone. Application of bleaching material after 24 h or 14 days of the application of resin infiltration did not have a significant effect or surface hardness or roughness of WSLs.

"Comparative Evaluation of Three Different Microabrasion Techniques in Esthetic Management of Fluorosis": An In Vivo Study

Aim

"Comparative evaluation of three different microabrasion techniques in esthetic management of fluorosis"-an in vivo study.

Materials and methods

A total of 48 permanent incisors in children between the age-groups of 8-12 years with Dean's fluorosis index modified criteria 1, 2, and 3 were included. The patients were randomly divided into three groups; each group included 16 samples. Group I-phosphoric acid and pumice microabrasion (37% phosphoric acid and pumice as abrasive), group II-opalustre microabrasion [6.6% hydrochloric (HCL) acid and silicon dicarbide (SiC2)], and group III-icon etch microabrasion (15% HCL acid gel as icon etch, pumice, and resin infiltrate). Preoperative sensitivity and pulp vitality of each tooth were evaluated. Standardized preoperative photographs were captured for the evaluation of color parameters L1, a1, and b1 by Adobe Photoshop 7 software and an assessment of color enhancement was carried out. Preoperative surface roughness was evaluated with two methods like, cellulose acetate replicating tape and confocal microscope, and Epoxy resin replica obtained from the preoperative impression of teeth using additional silicone and contact profilometer. Microabrasion was done accordingly. Postoperative values of all the parameters were evaluated.

Results

Phosphoric acid and pumice showed the best color change, followed by icon etch resin infiltrate. Opalustre (6.6% HCL acid and SiC2) and was unsuccessful as it had less concentration and was more abrasive.

Conclusion

Phosphoric acid and pumice showed the best color enhancement, followed by icon etch resin infiltrate and opalustre. Icon etch resin infiltrate showed minimal surface roughness followed by phosphoric acid and pumice and opaluster group.

How to cite this article

Reddy VN, Nagar P, Lakhotia R, et al. "Comparative Evaluation of Three Different Microabrasion Techniques in Esthetic Management of Fluorosis": An In Vivo Study. Int J Clin Pediatr Dent 2023;16(4):572-581.

Surface roughness and microhardness of enamel white spot lesions treated with different treatment methods

Objective

To analyse the surface roughness and microhardness of artificial enamel white spot lesions before and after WSL formation, after treatment (Opalsutre™ microabrasion, Sylc® bioactive glass, and ICON® resin infiltration), and after pH cycling with the help of the profilometer surface roughness tester and the digital Vickers microhardness tester.

Materials and methods

Seventy-five extracted molars were used to acquire one hundred specimens. 50 specimens were randomly assigned to five groups (n = 10) for the surface roughness study: 1) Sound group, 2) WSL group, 3) micro abrasion (MA; Opalustre, Ultradent, South Jordan, UT, USA), 4) bioactive glass 45S5 Sylc powder (Sylc; Denfotex Research Ltd, Inverkeithing, UK), and 5) ICON resin infiltration (ICON; DMG, Hamburg, Germany). An additional 25 specimens were used to obtain 50 enamel slabs for the surface microhardness study, which were also assigned to the same groups. All groups underwent a final stage of pH cycling. Surface roughness and surface microhardness measurements were performed at different stages for all groups.

Results

Regarding surface roughness, ICON significantly reduced the surface roughness compared to Opalustre and Sylc, with no significant difference between Opalustre and Sylc. In terms of surface microhardness, ICON showed the highest improvement, followed by Sylc and then Opalustre. Both surface roughness and microhardness were significantly affected by demineralization, partially improved after treatment, and then regressed significantly after pH cycling.

Conclusion

ICON resin infiltrant can be considered as a superior treatment option for improving surface roughness and microhardness, while Opalustre demonstrated relatively the poorest performance compared to the other treatment options. It is noteworthy that the pH cycling procedure had an adverse impact irrespective of the treatment option used.

Repeated Etching Cycles of Resin Infiltration up to Nine Cycles on Demineralized Enamel: Surface Roughness and Esthetic Outcomes-In Vitro Study

Resin infiltration (RI) is used to mask enamel opacities. There are three recommended etching cycles. However, anecdotal evidence suggests that favorable esthetics outcomes can be obtained by increasing the etching cycles. This study aimed to evaluate the effects of repeated etching cycles during RI application on esthetic changes and surface roughness of demineralized enamel at multiple treatment stages. Artificial demineralization was prepared on the buccal surface of ninety sound extracted premolars. The teeth were divided into nine groups (n = 10); with each consecutive group having one additional etching cycle up to nine etching cycles. Resin infiltrant was performed twice, first for 3 min (Resin 1) and again for 1 min (Resin 2). Surface roughness and esthetic changes were assessed using a profilometer (Ambios XP-200) and Minolta spectrophotometer, respectively, at baseline (sound enamel), etching, resin 1, resin 2, 7 days, and 28 days post resin applications. Data were analyzed with two-way ANOVA (p < 0.05). There was a significant interaction between the different stages and various groups of etching cycles on surface roughness, F(48, 126) = 3.48, p < 0.001. There was a significant interaction between the different stages and various groups of etching cycles on color changes, F(4, 126) = 1.177, p = 0.045. The surface roughness of demineralized enamel infiltrated with RI was less than that of sound enamel (baseline). There is a significant difference in color changes between resin 1 and resin 2 (p < 0.05). After five etching cycles, RI improved the esthetic of the color of teeth similar to the baseline. Surface roughness and color changes remained constant for 28 days. RI can be considered an effective and predictable treatment option for the restoration of early enamel lesions owing to its better surface characteristics and reliable masking effects. The color stability and surface roughness stay unaltered for up to 28 days.

Application of laser on enamel surface with three types of bioactive glasses-based resin infiltrants: An in vitro study

OBJECTIVE

The study aimed to evaluate and compare the surface micro-hardness, roughness, color, and morphology of enamel after Er,Cr:YSGG laser irradiation, followed by application of three types of bioactive glasses-based resin infiltrants, and the samples groups were challenged with the pH cycle.

METHODOLOGY

Experimental photoactivated resin infiltrants were synthesized using dimethacrylate resins, whereby three different types of bioactive glasses (BGs), i.e., 45S5, fluoridated-BG (F-BG), and borosilicate-BG (B-BG), were incorporated into the resin system. Initially, white spot lesions were created artificially on the toosth enamel surface, then irradiated with Er,Cr:YSGG laser. Then, the resin-only and BG-based resins were infiltrated on the enamel surface. All samples were pH challenged for 14 days, and the micro-hardness, surface roughness, surface morphology, and color stability (ΔE) analyses were conducted before and after the 14 days pH challenge.

RESULTS

After laser irradiation, the micro-hardness was significantly high with 45S5 group compared to resin-only (p = 0.021), F-BG (p = 0.042), and B-BG (p = 0.001) groups. After the pH challenge, the micro-hardness values for all groups were reduced significantly (p ≤ 0.05). The surface roughness was least with the resin-only group and showed a non-significant difference with F-BG (p = 0.34) and significant differences with both B-BG (p = 0.005), and 45S5 (p = 0.010) groups. After the pH cycle, the roughness of all groups was increased significantly (p ≤ 0.05), except B-BG group showed a non-significant difference (p = 0.528). The B-BG group showed significantly high ΔE between day 0 and baseline compared to resin-only (p = 0.0008), F-BG (p = 0.017), and 45S5 (p = 0.029), whereas between day 14 and baseline, the lowest ΔE value was observed for B-BG (14.2 ± 2.10) and maximum for the resin-only (20.57 ± 2.47) group. The SEM images showed pitting on the surface of all resin infiltrant groups after 14 days of pH challenge.

CONCLUSION

The morphological difference was observed after the laser irradiation on the enamel surface. The differences in micro-hardness, surface roughness, and color were observed after the application of experimental resin infiltrants and significant differences were observed after the pH challenge.

Roughness and Microhardness of Demineralized Enamel Treated with Resinous Infiltrants and Subjected to an Acid Challenge: An in vitro Study

Background:

Resinous infiltrating has proven effective in arresting incipient caries lesions.

Objective:

This study aimed to assess the penetration depth of an experimental resin-infiltrant (75% - TEGDMA, 25% - Bis-EMA, 1% - EDAB, 0.5% camphorquinone), compare it with commercial infiltrant Icon®, and analyze the surface-roughness and microhardness of the resin-materials infiltrated into tooth specimens, before and after pH cycling.

Methods:

To assess penetration depth, sound third molar specimens were submitted to ten de-remineralization cycles for incipient carious lesion induction and were then randomly divided into 2 groups (n=3): (I) Experimental Infiltrant (EI) and (II) Commercial Infiltrant Icon (CI). After resin infiltration into specimens, qualitative Confocal Fluorescence Microscopy images were captured. For roughness and microhardness assessment, new specimens were demineralized, then randomly divided into two groups (n=20): (I) Experimental Infiltrant (EI) and (II) Commercial Infiltrant Icon (CI) and submitted to roughness and microhardness readouts at the following time-intervals: (T1) sound tooth, (T2) white-spot caries lesion, (T3) resin material that infiltrated, and (T4) resin material that infiltrated and was exposed to pH-cycling. In statistical analyses, generalized linear models of repeated measures in time were applied, with a significance level of 5%.

Results:

The experimental infiltrant penetrated the carious lesion and exhibited lower roughness values after its application, even after pH cycling, similar to the CI. The microhardness value of the EI group was significantly lower in the last three-time intervals evaluated compared to CI.

Conclusion:

Experimental resin infiltrant was efficient in penetrating white spot lesions and reducing surface roughness; however, it did not increase surface microhardness.

Management of Enamel Defects with Resin Infiltration Techniques: Two Years Follow Up Retrospective Study

Background: Developmental Defects of Enamel (DDE) represent an aesthetic, functional, and often psychological problem, especially in young patients. Infiltrative treatment with resin (Icon-DMG, Hamburg, Germany) is a minimally invasive technique based on the infiltration of high viscosity resin inside the hypomineralized enamel, modifying its optical properties. The aim of this paper is to evaluate the clinical efficacy of superficial infiltration in the treatment of white enamel defects of the anterior sector with pre-eruptive etiology and its stability over time. Methods: Thirty-three patients affected by DDE associated with mild and moderate Molar Incisor Hypomineralization (MIH), mild and moderate fluorosis, and post-traumatic hypomineralization treated with resin infiltration were retrospectively retrieved. Results: In all cases an improvement in aesthetic appearance was achieved, and the 24-month follow-up confirmed the stability of the results. However, in the cases of traumatic hypomineralization the results were not completely satisfactory. Conclusions: The superficial infiltration technique can be considered a valid minimally invasive alternative to traditional treatment of mild or moderate fluorosis and mild MIH.

Effect of different surface treatments on the microhardness and colour change of artificial enamel lesions

BACKGROUND

To investigate the effect of three different surface treatments on the microhardness and colour change of artificial enamel lesions.

MATERIALS AND METHODS

One hundred bovine teeth were randomly assigned into four groups. Artificial enamel lesions were created using demineralizing solution for all groups except the sound enamel group. Different surface treatments were then performed G1: resin-infiltrant; G2: Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP); G3: artificial saliva; G4: Sound Enamel. Each group was subdivided into three subgroups, where each subgroup was subjected to a different testing method. Subgroup 1: surface microhardness; subgroup 2: cross-sectional microhardness; subgroup 3: colour measurement. Statistical analysis was performed by ANOVA, followed by Tukey's post hoc test.

RESULTS

Sound enamel group recorded the highest surface and cross-sectional microhardness results. No significant difference was found between the resin-infiltrant group and CPP-ACP regarding surface and cross-sectional microhardness at different lesion depths. Resin-infiltrant group showed the least colour change (∆E) results compared to the other groups.

CONCLUSION

Resin-infiltrant can effectively enhance surface microhardness and enamel resistance to demineralization, additionally, reduces the staining susceptibility of white spot lesions (WSLs) after treatment. CPP-ACP application for 4 weeks seems to improve surface microhardness; however, has a limited effect in resisting staining of WSLs after treatment. © 2022 Australian Dental Association.

Casein phosphopeptide amorphous calcium phosphate and universal adhesive resin as a complementary approach for management of white spot lesions: an in-vitro study

Background

White spot lesion (WSL) is the most common consequence during and after orthodontic treatment. This study was conducted to investigate the ability of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) coupled with universal adhesive resin to treat white spot lesions.

Material and methods

Forty-five extracted premolars were sectioned to create 90 specimens. Seventy-five specimens were demineralized to generate artificially created WSLs. Different strategies have been applied for the management of the artificially created WSLs. Six experimental groups were employed: Group I: sound enamel (control), Group II: demineralized enamel (artificially-created WSLs), Group III: ICON resin-treated WSLs, Group IV: CPP-ACP-treated WSLs, Group V: universal adhesive resin-treated WSLs, and Group VI: CPP-ACP followed by universal adhesive resin-treated WSLs. Assessment of color stability using a spectrophotometer, surface microhardness using a Vickers tester, and surface roughness using a profilometer was done. The surface topography of representative specimens from each experimental group was inspected using a scanning electron microscope. Collected data were analyzed using one-way ANOVA followed by Tukey’s post hoc test at p ≤ 0.05.

Results

White spot lesions treated with CPP-ACP and subsequently coated with universal adhesive resin (Group VI) exhibited a significantly lower ΔE than both CPP-ACP (Group IV) and universal adhesive resin-treated (Group V) groups (p ≤ 0.05), but it was not significantly different from the ICON resin-treated group (Group III). For surface microhardness, WSLs treated with CPP-ACP and consequently coated with universal adhesive resin (Group VI) recorded the highest mean that was significantly different from both ICON resin (Group III) and universal adhesive resin-treated (Group V) groups (p ≤ 0.05). All the tested strategies (ICON resin, CPP-ACP, universal adhesive resin, and CPP-ACP followed by universal adhesive resin) significantly lowered the surface roughness of the WSLs (p ≤ 0.05), while no significant difference was detected among them.

Conclusions

Combining a considerable caries remineralizing program using CPP-ACP with subsequent universal adhesive resin infiltration could be a promising approach to manage WSLs efficiently through increasing surface microhardness and restoring esthetic while developing a smoother surface.

Application of Selected Biomaterials and Stem Cells in the Regeneration of Hard Dental Tissue in Paediatric Dentistry-Based on the Current Literature

Currently, the development of the use of biomaterials and their application in medicine is causing rapid changes in the fields of regenerative dentistry. Each year, new research studies allow for the discovery of additional possibilities of dental tissue restoration. The structure and functions of teeth are complex. They consist of several diverse tissues that need to act together to ensure the tooth’s function and durability. The integrity of a tooth’s enamel, dentin, cementum, and pulp tissue allows for successful mastication. Biomaterials that are needed in dentistry must withstand excessive loading forces, be biocompatible with the hosts’ tissues, and stable in the oral cavity environment. Moreover, each tooth’s tissue, as well as aesthetic qualities in most cases, should closely resemble the natural dental tissues. This is why tissue regeneration in dentistry is such a challenge. This scientific research focuses on paediatric dentistry, its classification of caries, and the use of biomaterials in rebuilding hard dental tissues. There are several methods described in the study, including classical conservative methods such as caries infiltration or stainless-steel crowns. Several clinical cases are present, allowing a reader to better understand the described methods. Although the biomaterials mentioned in this work are artificial, there is currently ongoing research regarding clinical stem cell applications, which have a high potential for becoming one of the most common techniques of lost dental-tissue regeneration in the near future. The current state of stem cell development is mentioned, as well as the various methods of its possible application in dentistry.

Effects of Different Bleaching Agents on the Surface Topography and the Microhardness of Artificial Carious Lesions

Objectives The aim of this study was to evaluate the effects of in-office and at-home bleaching agent applications on the surface topography and microhardness of artificially demineralized enamel.

Materials and Methods A total of 224 enamel specimens were prepared using bovine sound central incisors. 4 mm × 4 mm enamel windows were exposed on the buccal surfaces covering the remaining surface with nail varnish. Samples were immersed in a demineralizing solution for 16 hours to produce artificial caries lesions, then divided into four groups according to the bleaching agent’s type and concentration. Group I; in-office bleaching 35% hydrogen peroxide (HP) (Whiteness HP Maxx; FGM, Brazil), Group II and Group III at-home bleaching 16 and 22% carbamide peroxide CP, respectively (Whiteness Perfect). Group IV; control (not bleached). The microhardness Vickers hardness number (VHN) was measured at the baseline, after demineralization, and after bleaching consequently. The micro-surface changes of the enamel surface after demineralization and bleaching were evaluated by scanning electron microscope (SEM).

Statistical Analysis Data were evaluated by the one-way analysis of variance (ANOVA) test followed by Post Hoc Tukey’s and Fisher’s least significant difference. Tow- sided p -values were considered statistically significant at p ≤ 0.05.

Results A significant reduction was noticed in the enamel microhardness after demineralization p < 0.05. However, there is no statistically significant difference between the mean VHN of the demineralized and bleached enamel ( p > 0.001). SEM images showed significant changes on the surface of the demineralized enamel after bleaching (pattern type III).

Conclusions The low and high concentrations of HP and CP bleaching agents increased the demineralization severity of artificial caries lesions without significantly altering their microhardness values.

Effect of Resin Infiltration on Enamel: A Systematic Review and Meta-Analysis

Subsurface enamel demineralization beneath an intact surface layer or white spots lesions (WSL) can and should be treated with non-invasive procedures to impede the development of a cavitated lesion. We aim to analyze if infiltrative resin improves enamel roughness, microhardness, shear bond strength, and penetration depth. MEDLINE [via Pubmed], Cochrane Central Register of Controlled Trials, Embase, Web of Science, Scholar, and LILACS were searched until May 2021. Methodological quality was assessed using the Joanna Briggs Institute Clinical Appraisal Checklist for Experimental Studies. Pairwise ratio of means (ROM) meta-analyses were carried out to compare the enamel properties after treatment with infiltrative resin on sound enamel and WSLs. From a total of 1604 articles, 48 studies were included. Enamel surface roughness decreased 35% in sound enamel (95%CI: 0.49–0.85, I² = 98.2%) and 54% in WSLs (95%CI: 0.29–0.74, I² = 98.5%). Microhardness reduced 24% in sound enamel (95%CI: 0.73–0.80, I² = 99.1%) and increased by 68% in WSLs (95%CI: 1.51; 1.86, I² = 99.8%). Shear bond strength reduced of 25% in sound enamel (95%CI: 0.60; 0.95, I² = 96.9%) and increased by 89% in WSLs (95%CI: 1.28–2.79, I² = 99.8%). Penetration depth was 65.39% of the WSLs (95%CI: 56.11–74.66, I² = 100%). Infiltrative resins effectively promote evident changes in enamel properties in sound and WSLs. Future studies with long-term follow-ups are necessary to corroborate these results from experimental studies.

A comparative evaluation of penetration depth and surface microhardness of Resin Infiltrant, CPP-ACPF and Novamin on enamel demineralization after banding: an in vitro study

Background

The field of dentistry has been revolutionized by various concepts. Minimal invasive dentistry is the preferred treatment approach in the present era; therefore, various techniques have been advocated to arrest caries lesions at an early stage on the grounds of better understanding of the dynamic nature of dental caries. Thus, study was conducted to compare and evaluate the penetration depth and enamel microhardness of Resin Infiltrant, CPP-ACPF and Novamin on artificial demineralized enamel surface after orthodontic banding.

Material and methods

Eighty extracted sound premolars were banded. The bands were cemented with type 1 GIC and further divided into – Group I: Resin Infiltrant, Group II: CCP-ACPF, Group III: Novamin and Group IV: Control. The samples were incubated for 30 days and then thermocycled. A window of 4 mm × 4 mm was prepared on the buccal surface of samples and artificially demineralized for 4 weeks. A single application was made for Resin Infiltrant, while Novamin and CCP-ACPF were applied twice daily. These samples were otherwise immersed in artificial saliva, and this was protocol was observed for 14 days. For the evaluation of penetration depth, 10 samples from each group were bucco-lingually sectioned and immersed in methylene blue dye solution for 24 h and then evaluated under stereomicroscope. For the enamel surface microhardness, remaining 10 samples from each group were embedded in acrylic resin with outer buccal surface exposed and were tested by a using digital Micro-Vickers hardness tester.

Results

All groups showed a significant difference in the depth of dye penetration and surface microhardness compared to the control group. As compared to the other tested groups, Resin Infiltrant exhibited the highest significant reduction in demineralization and increased microhardness. Novamin had a deeper penetration and increase in microhardness as compared to CCP-ACPF.

Conclusion

Resin Infiltrant exhibited the highest potential to impede caries and constitutes a competent aerosol free micro-invasive strategy for combating non cavitated lesions approaching the outer layer dentine which are too advanced for remineralizing agents but do not necessarily require any drilling of tooth.

Comparing Impact of Two Resin Infiltration Systems on Microhardness of Demineralized Human Enamel after Exposure to Acidic Challenge

AIM: This study compared the impact of two resin infiltration systems on microhardness of demineralized enamel before and after an acidic challenge. MATERIALS AND METHODS: A total of forty human maxillary molar teeth were used in this study. Each tooth has 4 groups (four standardized windows onto each tooth). Group A1: Untreated sound enamel surface (positive control), Group A2: Artificially demineralized enamel surface (negative control), Group A3: Icon resin infiltrating to demineralized enamel, while Group A4: Single bond universal adhesive applied to the demineralized enamel surface. All teeth were immersed in a demineralizing solution. The groups (A3 and A4) were further subdivided into two subgroups according to acidic ethanol challenge Subgroup B1: Specimens tested before an acidic challenge and B2: Specimens tested after an acidic challenge. Vickers microhardness test was done for all groups. One-way analysis of variance (ANOVA) was used to study the difference between tested groups on mean microhardness within each group. Tukey’s post-hoc test was used for pair-wise comparison between the means when ANOVA test was performed, and the significance level was set at p ≤ 0.05. RESULTS: Icon resin infiltration and single bond universal adhesive showed significantly higher mean microhardness than negative control, but significantly lower mean microhardness than positive control. However, insignificant difference was found between icon and single bond universal adhesive. After the acidic challenge, icon resin infiltration showed significantly higher mean microhardness than negative control. However, single bond universal adhesive showed insignificant difference as compared to the negative control. CONCLUSION: After an acidic challenge, icon resin infiltration was more successful than single bond universal total-etch adhesive system in microhardness. RECOMMENDATION: Icon resin infiltration technique is a promising, noninvasive approach that prevents the progress of the carious lesion.

The Evaluation of Different Treatments of Incipient Caries Lesions: An in Situ Study of Progression Using Fluorescence-based Methods

CLINICAL RELEVANCE

Effective methods to control incipient caries lesions are needed. In this investigation, several methods provide encouraging results.

SUMMARY

This study aimed to evaluate in situ the inhibition of incipient caries lesion progression using different treatment protocols and to evaluate the effectiveness of fluorescence-based methods (DIAGNOdent, DIAGNOdent pen, and VistaProof fluorescence camera [FC]) in monitoring this process. The research was conducted in four phases: (1) at baseline, (2) after a first cariogenic challenge, (3) after treatment modalities, and (4) after a second cariogenic challenge. Sixteen volunteers used intraoral acrylic palatal appliances, each containing six enamel blocks (n=96). The cariogenic challenge was performed using a 20% sucrose solution over a 14-day period. The appliances were removed eight times a day and, upon removal, two drops of the solution were placed onto each enamel block. The enamel blocks were randomly assigned to three treatment groups: fluoride varnish ([FV] Duraphat; n=32), resin infiltrant ([RI] Icon; n=32), and adhesive system ([AS] Scotchbond; n=32). At the end of each phase, the surface microhardness (SMH) was measured, and two trained examiners evaluated the specimens using fluorescence-based methods. In addition, integrated mineral loss (ΔΔZ; vol%.min x μm) and lesion depth (ΔLD; μm) were evaluated using transverse microradiography. A two-way analysis of variance and a Tukey post hoc test were calculated (α=5%). Significant differences in SMH were observed according to the treatment, phases, and interaction of factors (p<0.001). Treatment with FV resulted in significantly higher SMH values in phases 3 and 4 compared to RI and AS, with the last two treatments resulting in similar values (p>0.05). The ΔΔZ value was similar for FV and AS but significantly higher for RI (p=0.016). ΔLD was not significantly different among the groups (p=0.126). Significant differences in the measurement of fluorescence for each fluorescence-based method were observed between each phase of the study (p<0.05). It can be concluded that all treatments were effective in inhibiting the in situ progression of incipient lesions, although to different degrees, with minor mineral loss changes observed for the AS and FV. Besides, all fluorescence-based methods tested, except for that using the FC device, were effective in monitoring caries lesion progression.

Hypersensitivity in Molar Incisor Hypomineralization: Superficial Infiltration Treatment

To date, there are no standardized protocols available in the literature for hypersensitivity treatment in molar incisor hypomineralization (MIH) patients. The aim of this study was to evaluate the efficacy of erosion–infiltration treatments with resin in children with a strong hypersensitivity and also to develop a minimally invasive diagnostic–therapeutic pathway for young MIH patients. Patients with clinical signs of MIH were enrolled according to international guidelines. A total of 42 patients (8–14 years old) with sensitivity of at least one molar and patients with post eruptive enamel fractures, but without dentin involvement or cavitated carious lesions were selected. A single superficial infiltration treatment with ICON (DMG, Germany) was performed with a modified etching technique. Sensitivity was tested with the Schiff Scale and Wong Baker Face Scale and was repeated at 12 months follow-up. All patients reported lower sensitivity values at the end of the treatment. Significant differences of sensitivity according to the Schiff scale were reported between T0 and all subsequent follow-ups, p < 0.05. The treatment of erosion infiltration with ICON resin is a minimally invasive preventive treatment that significantly improves the problem of hypersensitivity in permanent molars with MIH.

Effect of resin infiltration application on early proximal caries lesions in vitro

Background/purpose

Resin infiltration (RI) material ICON is used in treating early proximal caries lesions, as it depends on a micro-invasive infiltration technology. This in vitro study aimed to evaluate the effect of ICON resin infiltration (RI) on early proximal caries by comparing surface roughness and hardness before and after treatment with RI using atomic force microscopy (AFM), automated microhardness testing system (AMHTS), and scanning electron microscopy (SEM) in vitro.

Materials and methods

Twenty seven premolars extracted for orthodontic reasons were sectioned buccolingually, creating 54 specimens. Each specimen was immersed in demineralizing solution to induce caries. Only teeth with "International Caries Detection and Assessment System" codes 1 and 2 were selected. The specimens were divided randomly into either AFM, AMHTS or SEM groups, which examined demineralized enamel before and after treatment with ICON.

Results

The mean average surface roughness and root mean square roughness values of demineralized enamel treated with ICON were significantly higher than untreated lesions (P < 0.001). The mean Vickers hardness values for demineralized enamel treated with ICON was significantly higher than untreated lesions (P < 0.001). SEM showed irregular, pitted and rough demineralized enamel surface with destruction of enamel rods and dissolution of enamel crystals. After ICON application, the surface showed complete blockage of enamel rods with RI and irregular, rough uneven topography.

Conclusion

RI application on proximal incipient caries increased surface roughness and hardness significantly.

Effect of Two Methods of Remineralization and Resin Infiltration on Surface Hardness of Artificially Induced Enamel Lesions

Statement of the Problem:

The progression of incipient carious lesions may be simply prevented by non-invasive remineralization of lesions, eliminating the need for invasive and high-cost restorative procedures.

Purpose:

This study aimed to assess the effect of two commonly used remineralizing agents and resin infiltration on surface micro hardness of incipient enamel lesions at different time points.

Materials and Method:

In this in vitro study, 45 intact human maxillary central incisors were selected. After disinfection, enamel samples measuring 5x5x2.5 mm were cut out of the labial surface of the teeth. The surface of samples was polished and they were mounted in auto-polymerizing acrylic resin. According to Amaechi’s method, samples were immersed in acidified hydroxyethylcellulose system (pH= 4.5) for 96 hours to induce white spot lesions (WSLs). The baseline value of surface micro hardness of samples was measured using a Vickers hardness tester, then the samples were randomly divided into three groups (n=15) based on different remineralization methods: MI-Paste Plus, Remin Pro and ICON-Infiltrant according to the manufacturer’s instructions. All samples were stored in anti-dry mouth treatment agent during the experiment and their surface hardness was measured at 15 days (T1) and 20 weeks (T2).

Results:

The hardness of samples in MI-Paste Plus and Remin Pro groups significantly increased at both T1 and T2 (p< 0.001) but this increase was not significant in ICON group (p> 0.05).

Conclusion:

MI-Paste Plus and Remin Pro can efficiently increase the hardness of incipient enamel lesions.

Effect of Resin Infiltration Technique on Improving Surface Hardness of Enamel Lesions: A Systematic Review and Meta-analysis

OBJECTIVE

White spot lesion (WSL) is recognized as the first clinical sign of enamel caries; it is a very critical phase because it can be prevented from progression to frank caries by changing the surrounding destructive environment. The present study was undertaken to systematically review the effect of resin infiltration (RI) technique on surface hardness (SH) of WSL.

METHODS

Five electronic databases were searched with proper key words. Related titles and abstracts, up to October 2018, were screened, selected, and subjected to quality assessments. After collecting data, meta-analyses were carried out to compare the effect of RI with untreated WSL and sound enamel by using the STATA software.

RESULTS

A total of 4567 articles were included in the study after initial search. Finally, 10 studies were reliable enough in methodology to be included in the study. Metadata analyses, carried out on 7 studies that compared SH of RI group with untreated samples, showed a significant increase in SH with 3.66 mean difference (95% confidence interval = 2.56‒4.77, Q value = 36.07, I² = 83.4%). However, meta-analysis on 4 studies that compared SH of RI with sound enamel showed a significant decrease in SH with -2.35 overall mean difference (95% confidence interval = -3.91-0.98, P = .00, Q value = 31.75, I² = 90.6%).

CONCLUSION

The RI technique can enhance SH of WSL; however, regaining the SH of RI-treated WSLs similar to sound enamel is doubtful. Application of RI is more effective than other methods, including application of fluoride, enamel pro-varnish, adhesive, and colloidal silica infiltration for enhancing SH of WSLs.

The Use of Resinous Infiltrants for the Management of Incipient Carious Lesions: a Literature Review

AbstractThe objective of this work was to analyze scientific evidence from a literature review pertaining to the effectiveness of resinous infiltrants for minimally invasive treatment of incipient carious lesions. Studies published between 2002 and 2019 were queried from the following databases: Capes, PubMed, Medline, BBO, Lilacs and SciELO. The search keywords included "Dental Caries", "Tooth Remineralization", "Dental Leakage". Most of the studies found resin-infiltrating treatment to be a viable option for the minimally invasive treatment of incipient carious lesions; this treatment was able to fulfill the primary expected effects: inhibition of carious progression and the lesions esthetic improvement. However, some issues need to be clarified to improve the safety of this treatment because it can be recommended in clinical practice. In conclusion, the use of resinous infiltrants has been reported as promising for the treatment of incipient carious lesions. However, there is a need for long-term studies to confirm the effectiveness of this treatment to determine its applicability for clinical use. Keywords: Dental Caries. Dental Leakage. Tooth Remineralization. ResumoO objetivo desse trabalho foi analisar evidências científicas, por meio de uma revisão de literatura, sobre a eficácia do uso de infiltrantes resinosos para o tratamento minimamente invasivo de lesões cariosas incipientes. A seleção do material literário utilizado foi realizada por pesquisa sobre o tema nas bases de dados: portal de periódicos Capes, PubMed, Medline, BBO, Lilacs e SciELO, abrangendo prioritariamente, o período de 2002 a 2019. Para busca nas bases de dados foram utilizadas palavras-chave como “Cárie Dentária”, “Remineralização Dentária”, “Infiltração Dentária”, assim como suas correspondentes na língua inglesa.  A maioria dos estudos encontrados aponta o tratamento infiltrante resinoso como uma opção viável para o tratamento minimamente invasivo de lesões cariosas incipientes sendo capaz de cumprir os principais efeitos esperados: inibição da progressão cariosa e melhoria estética das lesões. Entretanto, alguns impasses necessitam ser esclarecidos para que o tratamento seja recomendado com mais segurança na prática clínica. Conclui-se que o uso de infiltrantes resinosos tem sido relatado como promissor para o tratamento de lesões cariosas incipientes, contudo há necessidade de novas pesquisas e estudos a longo prazo para confirmar sua eficácia em todos aspectos desejáveis para seu uso clínico. Palavras-chave: Cárie Dentária. Infiltração Dentária. Remineralização Dentária.

Resin Infiltration of Artificial Enamel Lesions: Evaluation of Penetration Depth, Surface Roughness and Color Stability

Aim

To evaluate the penetration depth, surface roughness, and color stability of resin infiltration restoration of artificial enamel lesions induced in primary and permanent teeth.

Materials and methods

Primary (group I, n = 30) and permanent (group II, n = 30) extracted non-carious human anterior teeth were subjected to demineralization for four days after creating a window of 5 mm × 5 mm on the labial surfaces. Demineralized area was infiltrated with the low viscosity resin. Ten samples from each group were evaluated for penetration depth, surface roughness, and color stability, respectively. Penetration depth was determined using a stereomicroscope at 80× magnification. Surface roughness of sound and infiltrated enamel was recorded using a profilometer. The color stability was assessed at 2, 4, and 8 weeks along with baseline values using vita easy shade spectrophotometer.

Results

Data were analyzed using the student “t” test and Friedman test. The degree of resin penetration was observed to be higher in primary teeth (32.6 ± 15.72 μm) compared to permanent teeth (24.23 ± 6.85 μm), but no significant difference was found (p = 0.138). Surface roughness values of resin infiltrated enamel is similar to that of sound enamel in both primary (p = 0.617) and permanent teeth (p = 0.234). The mean color stability scores immediately after resin infiltration at 2, 4, and 8 weeks intervals showed no statistically significant difference in primary (p = 0.998) and permanent teeth (p = 0.213).

Conclusion

Resin penetration into enamel lesions was more in primary teeth enamel compared to permanent. The early enamel lesions, when treated with resin infiltration, showed surface characteristics similar to sound enamel and also exhibited acceptable color up to 8 weeks duration.

Clinical significance

Resin infiltration can be considered as an effective and predictable treatment option for the restoration of early enamel lesions owing to its deeper penetration, provision of better surface characteristics, and reliable masking of white spot lesions in both primary and permanent dentitions.

How to cite this article

Aswani R, Chandrappa V, Uloopi KS, et al. Resin Infiltration of Artificial Enamel Lesions: Evaluation of Penetration Depth, Surface Roughness and Color Stability. Int J Clin Pediatr Dent 2019;12(6):520–523.

Is Resin Infiltration a Microinvasive Approach to White Lesions of Calcified Tooth Structures?: A Systemic Review

Aim

The treatment of white lesions should aim at arresting the lesion progression of carious lesions and improving the esthetics by diminishing the opacity of the developmental disturbances of a tooth. The objective of this review was to present the scientific basis, the principles of resin infiltration and to discuss its inherent clinical applications.

Data sources

Data were identified by PubMed searches. Papers published in English between 2010 and 2015 were selected and most up-to-date or relevant references were chosen.

Conclusion

The resin infiltration technique, while promising, needed more clinical evidence for conclusive findings. However, based on available laboratory and clinical studies, it seems convincing that resin infiltration of enamel lesions should aim at arresting the progression of white spot lesions. Combining this microinvasive approach with a substantial caries remineralization program may provide therapeutic benefits and significantly reduce both long term restorative needs and costs, thus complementing the concept of minimum intervention dentistry.

How to cite this article

Manoharan V, Kumar AS, et al. Is Resin Infiltration a Micro invasive Approach to White Lesions of Calcified Tooth Structures?: A Systemic Review. Int J Clin Pediatr Dent 2019;12(1):53-58.

Effect of resin infiltration and microabrasion on the microhardness, surface roughness and morphology of incipient carious lesions

OBJECTIVE

The effects of resin infiltration and microabrasion on incipient carious lesions by surface microhardness, roughness and morphological assessments, and resistance to further acid attack of treated lesions were evaluated.

MATERIAL AND METHODS

Eighty artificially-induced incipient lesions were randomly divided into five groups (n = 16): resin infiltration with an adhesive resin (Excite F, Ivoclar Vivadent, Schaan, Liechtenstein), resin infiltration with a resin infiltrant (Icon, DMG, Hamburg, Germany), microabrasion without polishing (Opalustre, Ultradent, South Jordan, UT, USA), microabrasion with polishing (Opalustre, Ultradent, Diamond Excel, FGM, Joinville, SC, Brazil), and distilled water (control group). All specimens were exposed to demineralization for another 10 d. Microhardness, roughness and morphological assessments were done at baseline, following initial demineralization, treatment and further demineralization. Data were analysed by the Kruskal-Wallis, Friedman's and Bonferroni tests (p < .05).

RESULTS

Enamel lesions treated with resin infiltrant and microabrasion demonstrated similar hardness values, with a nonsignificant difference compared with sound enamel. Resin infiltration demonstrated lower roughness values than those of microabrasion, and the values did not reach the values of sound enamel. Further demineralization for 10 d did not affect the hardness but increased the roughness of infiltrated and microabraded enamel surfaces. Polishing did not influence the roughness of microabraded enamel surfaces. After resin infiltration, porosities on enamel were sealed completely. The surface structure was similar to that of the enamel conditioning pattern for microabraded enamel lesions.

CONCLUSIONS

Within the limitations of this study, the icon infiltration and microabrasion technique appeared to be effective for improving microhardness. Icon appeared to provide reduced roughness, although not equal to sound enamel. Further research is needed to elucidate their clinical relevance.

Efficacy of 4-year treatment of icon infiltration resin on postorthodontic white spot lesions

White spot lesions are defined as enamel surface and sub surface demineralisation, although these lesions can be reversed and do not form cavities. Infiltration using fluid resin proved to be a valid micro-invasive alternative compared with traditional conservative therapy. This has allowed treatment without any trauma (no use of local anaesthesia and cavity preparation) of numerous lesions in only one session with stable clinical (mechanical stability, enamel hardness, conservation of sound tissue) and aesthetic results (disappearance of lesions) over the time. The present report evaluates the effectiveness of Icon infiltration resin on postorthodontic white spots at 6 months, 1 and 4 years.

In vitro study of white spot lesion: Maxilla and mandibular teeth

Aim

The aim of the study was to evaluate the effect of resin infiltration on colour changes and surface roughness of artificial white spot lesions (WSLs) on maxillary and mandibular premolar.

Materials and methods

Sixty (60) extracted sound Maxilla (Mx) and Mandibular (Mn) premolars were randomly divided into 2 groups (test and control). Artificial WSLs were produced on buccal surface of teeth and were immersed in artificial saliva for 8 weeks. Colour components (L^∗, a^∗, b^∗) and surface roughness (Sa^∗) were assessed on 40 teeth using colour difference meter RD-100 and Alicona® Infinite Focus profilometer respectively. The measurements were done at baseline (T1), directly after artificial WSLs (T2), after 24 hours immersed in saliva and application of resin (T3) and immersion in artificial saliva for 1 (T4), 2 (T5), 4 (T6), 6 (T7) and 8 (T8) weeks. SEM images analysis were carried out on 20 teeth in four time points.

Results

The values of L^∗ (lightness), b^∗ (yellow/blue) and Sa^∗ (surface roughness) are gradually reduced to the baseline value. Whereas, the value of a^∗ gradually increased with distinct treatment time to achieve the baseline value. The higher value of L^∗ and Sa^∗, the whiter the lesion suggesting higher degree of enamel demineralization and surface roughness. Lower L^∗ values suggest a masking colour effect.

Conclusion

The material produced favorable esthetics on colour and the surface roughness of teeth at distinct treatment times. It is recommended to be used to improve WSL post orthodontic treatment.

Microhardness and Roughness of Infiltrated White Spot Lesions Submitted to Different Challenges

A white spot lesion is the first clinical sign of a caries lesion and represents mineral loss from the enamel subsurface. The purpose of this study was to evaluate the microhardness and surface roughness of white spot lesions after application of a resin infiltrant and subjection to different challenges. Caries-like lesions were induced in bovine enamel discs (n=50), and the specimens were randomly divided into five study groups (n=10): demineralized enamel (negative control, G1), infiltrated enamel (G2), infiltrated enamel submitted to brushing (G3), infiltrated enamel submitted to pH cycling (G4), and infiltrated enamel submitted to artificial aging (G5). Half of each enamel surface was used as its own positive control. Roughness data were analyzed using the Kruskal-Wallis test followed by the Dunn test. Results from microhardness were analyzed by two-way analysis of variance, followed by the Tukey test for multiple comparisons. The level of significance was set at 5%. Microhardness and roughness values obtained from the test side of the specimens were significantly lower compared with the sound enamel for all groups. Microhardness values obtained for G2, G3, and G5 were not significantly different. Values found for G1 were significantly lower compared with those for G2, G3, and G5. The lowest microhardness values were observed for G4, which was significantly different from the other groups. Surface roughness was not significantly different between G2 and G3. The resin infiltrant presented superiority over the unprotected white spot lesions, as they were more resistant to mechanical and aging challenges. However, resin infiltration was not able to reestablish the properties of sound enamel and was not resistant to a new cariogenic challenge.

Microhardness and Penetration of Artificial White Spot Lesions Treated with Resin or Colloidal Silica Infiltration

INTRODUCTION

Infiltration of early enamel lesions by materials having remineralizing capacity seems to improve aesthetics and arrests caries progression.

AIM

To evaluate and compare the surface microhardness and penetration depth of a low viscosity resin and colloidal silica nanoparticle infiltrates into artificially created white spot lesions.

MATERIALS AND METHODS

Forty extracted human central incisors were embedded in acrylic resin blocks exposing the labial surfaces of the crowns. The specimens were immersed in demineralizing solution for 96 hours to create white spot lesions on labial surfaces. The samples were then divided into two groups (n=20 each), where in Group 1-resin infiltration (ICON DMG, Hamburg, Germany) and Group 2-colloidal silica infiltration (Arrow Fine chemicals, Rajkot, Gujarat, India) was done. Samples were subjected to vicker's microhardness testing at baseline, after demineralization and after treatment with resin or colloidal silica infiltrates. Then, the crowns were sectioned longitudinally and penetration depth of the infiltrants was measured using confocal laser scanning microscope and compared the readings to lesion depth. All the collected data was subjected to statistical analysis using t-test.

RESULTS

Resin infiltration group showed significantly greater increase in microhardness compared to colloidal silica infiltration (p=0.001). The percentage of penetration of the resin group was 67.14% and that of colloidal silica group was 54.53% indicating significant difference between the two.

CONCLUSION

Resin infiltrates performed better in regaining the baseline microhardness and penetrating deep into the porous white spot lesions, when compared to colloidal silica infiltrates.

Comparison of the effect of resin infiltrant, fluoride varnish, and nano-hydroxy apatite paste on surface hardness and streptococcus mutans adhesion to artificial enamel lesions

Introduction

Dental caries is a major public health problem, and Streptococcus mutans is considered the main causal agent of dental caries. This study aimed to compare the effect of three re-mineralizing materials: resin infiltrant, fluoride varnish, and nano-hydroxy apatite paste on the surface hardness and adhesion of Streptococcus mutans as noninvasive treatments for initial enamel lesions.

Methods

This experimental study was conducted from December 2015 through March 2016 in Babol, Iran. Artificial enamel lesions were created on 60 enamel surfaces, which were divided into two groups: Group A and Group B (30 subjects per group). Group A was divided into three subgroups (10 samples in each subgroup), including fluoride varnish group, nano-hydroxy apatite paste group (Nano P paste), and resin infiltrant group (Icon-resin). In Group A, the surface hardness of each sample was measured in three stages: First, on an intact enamel (baseline); second, after creating artificial enamel lesions; third, after application of re-mineralizing materials. In Group B, the samples were divided into five subgroups, including intact enamel, demineralized enamel, demineralized enamel treated with fluoride varnish, Nano P paste, and Icon-resin. In Group B, standard Streptococcus mutans bacteria adhesion (PTCC 1683) was examined and reported in terms of colony forming units (CFU/ml). Then, data were analyzed using ANOVA, Kruskal-Wallis, Mann-Whitney, and post hoc tests.

Results

In Group A, after treatment with re-mineralizing materials, the Icon-resin group had the highest surface hardness among the studied groups, then the Nano P paste group and fluoride varnish group, respectively (p = 0.035). In Group B, in terms of bacterial adhesion, fluoride varnish group had zero bacterial adhesion level, and then the Nano P paste group, Icon-resin group, intact enamel group, and the de-mineralized enamel group showed bacterial adhesion increasing in order (p < 0.001).

Conclusion

According to the study among the examined materials, the resin infiltrant increased the tooth surface hardness as the intact enamel and fluoride varnish had the highest reduction level for bacterial adhesion. Nano P paste had an effect between the two materials, both in increasing surface hardness and reducing bacterial adhesion.

Evaluation of Surface Roughness Characteristics Using Atomic Force Microscopy and Inspection of Microhardness Following Resin Infiltration with Icon®

OBJECTIVE

The aim of this study was to evaluate the surface roughness via atomic force microscopy (AFM) as well as to evaluate the microhardness values of Icon^® in comparison with sound and demineralized enamel in a large subject group.

MATERIALS AND METHODS

Enamel samples were prepared from sound bovine incisors and randomly allocated into either AFM (n = 60) or microhardness (n = 60) groups. The AFM group was divided into control (n = 30) and Icon^® (n = 30) subgroups. The microhardness group was also divided into three subgroups: control (n = 20), demineralization (n = 20) and Icon^® (n = 20) groups. The demineralization and Icon^® subgroups were subjected to a demineralizing solution (pH: 4, 2 hours). Following the formation of shallow white spot lesions and application of the infiltrant, each sample was examined according to its parameter.

RESULTS

AFM images suggested that Icon^® had a significantly rougher surface than the control group. When the AFM results were evaluated numerically, it was evident that the Icon^® group possessed statistically higher Sa, Sq, mean height, and maximum deviation values compared to the control group. The mean Vickers hardness values of all groups were determined to be significantly different from one another. Hardness values in the demineralization group were determined to be significantly lower than the control and Icon^® groups. No statistically significant difference was observed between mean Vickers hardness values for the contol and Icon^® groups.

CONCLUSIONS

The present in vitro study shows that more studies are required to improve the surface quality of this infiltrant material.

CLINICAL SIGNIFICANCE

The present in vitro study shows that the resin infiltration technique results in increased microhardness of demineralized enamel. However, it was observed that the infiltrant material creates a significantly rougher surface compared to healthy, untreated enamel. (J Esthet Restor Dent 29:201-208, 2017).

Resin infiltrant for non-cavitated caries lesions: evaluation of color stability

BACKGROUND

The objective of this in vitro study was to evaluate the over time color stability of one resin infiltrant (Icon) upon exposure to staining solutions (coffee and wine) compared with one nano-hybrid sealant (Grandio Seal), one transparent fissure sealant with fluoride (Control Seal) and one nanofilled composite (Filtek Supreme XTE).

MATERIAL AND METHODS

All materials were polymerized according to manufacturers' instructions into silicon rings (height 1 mm; internal diameter 6 mm; external diameter 8 mm) to obtain specimens identical in size. The specimens were immersed in staining solutions at room temperature over a 28-day test period. The control samples have not been subjected to the staining process. A colorimetric evaluation according to the CIE L*a*b* system was performed by a blind trained operator at 7, 14, 21, 28 days of the staining process. Shapiro Wilk test and Kruskal Wallis ANOVA were applied to assess significant differences among different materials. Means were compared with Scheffe's multiple-comparison test at the 0.05 level of significance.

RESULTS

In the case of all materials, immersion in solutions resulted in clinically perceivable color changes after 1 week (∆E < 3.3). Lowest CIE L* variation was registered for Control Seal and Grandio Seal both after 1 week and after 1 month, while Icon showed significantly higher variation (P < 0.05). Color coordinate CIE a* varied significantly more for Icon samples (P > 0.05). Color coordinate CIE b* varied similarly for all materials tested (P > 0.05).

CONCLUSIONS

Immersion in coffee or red wine resulted in clinically perceivable color changes for all materials tested. Icon showed the highest color variations both after 1 week and 1 month. Icon can fix the initial esthetic problem associated with white spot lesions, but the resin may become more discolored than other materials over time. Key words:CIE Lab, color stability, resin infiltrant.

Surface Properties and Color Stability of Resin-Infiltrated Enamel Lesions

OBJECTIVES

To examine the surface topographies, microhardness, and color stability of resin-infiltrated enamel lesions before and after aging challenges in vitro using three-dimensional laser scanning profilometry, surface microhardness testing, spectrophotometry, and scanning electron microscopy.

METHODS

Forty human third molars were embedded in epoxy resin, and each tooth was prepared to have two white spot lesions and one sound enamel area. One white spot lesion received resin infiltration and the other was untreated. Ten specimens were subjected to thermocycling for 10,000 cycles, 10 specimens were immersed in coffee solutions, and 10 specimens were placed in water storage. Surface area roughness (Sa), Vickers microhardness (VHN), and CIE L*a*b* color values were measured on sound enamel, resin-infiltrated lesions, and untreated lesions before and after aging. The surface morphology of resin-infiltrated lesions was observed after aging under scanning electron microscopy and compared with 10 specimens that were not subjected to aging challenge.

RESULTS

Resin infiltration increased the surface microhardness of the enamel lesions from 89.3 to 212.0 VHN. The surface microhardness of resin-infiltrated enamel lesions was not significantly affected by aging. The surface roughness of resin-infiltrated lesions (0.32-0.37 μm) was greater than that of sound enamel (0.05-0.06 μm) and untreated lesions (0.12-0.13 μm). Thermocycling and water storage further increased surface roughness of resin-infiltrated surfaces. Resin-infiltrated enamel lesions showed greater discoloration than sound enamel surfaces. Surface microfissures and microcracks were observed on resin-infiltrated enamel lesions after thermocycling.

CONCLUSIONS

Surface hardness of enamel lesions increased significantly after resin infiltration and remained stable following thermocycling. Surface roughness and color stability of resin-infiltrated enamel lesions were less than ideal and might further deteriorate after aging in the oral environment.

Treatment of Fluorosis Spots Using a Resin Infiltration Technique: 14-month Follow-up

The aim of this study was to report a clinical case of moderate fluorosis spots treated with infiltration of low-viscosity resin. A commercial resin was applied to the facial surfaces on the anterior teeth in both the maxillary and mandibular arches. The white spots of fluorosis lost their whitish appearance and appeared similar to sound enamel. This technique, which might constitute an alternative to white-masking of fluorosis spots, showed optimal esthetic results.

Comparative Study of the Effect of Acid Etching on Enamel Surface Roughness between Pumiced and Non-pumiced Teeth

BACKGROUND

The objective was to perform a comparative analysis of the effect of acid etching on enamel roughness between pumiced and non-pumiced teeth.

MATERIALS AND METHODS

The sample was composed of 32 dental surfaces divided into two groups: Group 1-16 surfaces having received pumice prophylaxis; and Group 2-16 surfaces not having received pumice prophylaxis. The teeth were kept in saline until the first record of surface roughness prior to etching. For each surface, a roughness graph was obtained through trials using a surface roughness tester. This procedure was repeated two more times at different locations for a total of three readings which, later, were converted in a mean value. The teeth were then acid etched with a 37% phosphoric acid for 60 s, rinsed with water, air dried, and tested with the roughness tester again using the same protocol described for baseline. The Quantikov image analysis program was used to measure the length of the graphs. The average value of the lengths was recorded for each surface before and after etching. The increase in roughness caused by acid etching was calculated and compared between groups.

RESULTS

The mean increase in roughness caused by the etching was 301 µm (11.37%) in Group 1 and 214 µm (8.33%) in Group 2. No statistically significant difference was found between samples with and without pumice prophylaxis (P = 0.283).

CONCLUSION

The present study showed that the effect of acid etching on enamel roughness was not significantly affected by prior pumice prophylaxis.

Effect of resin infiltration on enamel surface properties and Streptococcus mutans adhesion to artificial enamel lesions

The aim of this study was to evaluate and compare the effects of resin infiltration and sealant type on enamel surface properties and Streptococcus mutans adhesion to artificial enamel lesions. Artificial enamel lesions were produced on the surfaces of 120 enamel specimens, which were divided into two groups: Group A and Group B (n=60 per group). Each group was further divided into four subgroups (n=15 per subgroup) according to sealant type: Group I-Demineralized enamel (control); Group II-Enamel Pro Varnish; Group III-ExciTE F; and Group IV-Icon. In Group A, hardness and surface roughness were evaluated; in Group B, bacterial adhesion was evaluated. Icon application resulted in significantly lower surface roughness and higher hardness than the other subgroups in Group A. In Group B, Enamel Pro Varnish resulted in lowest bacterial adhesion, followed by Icon. This study showed that resin infiltration of enamel lesions could arrest lesion progress.

White spots on enamel: treatment protocol by superficial or deep infiltration (part 2)

In this 2nd part, the current treatment of white spot lesions by erosion/infiltration is presented, beginning with a reminder of the principle of superficial infiltration, which enables most early carious lesions, fluorosis and post-traumatic lesions to be treated. However, this technique has met with frequent failures in cases of MIH or deep lesions of traumatic origin or those associated with fluorosis. For this reason a new deep infiltration technique is proposed: thanks to its global treatment concept, this enables all white spots to be treated. The place of whitening in these treatment options is discussed, with explanations of the main reasons for its failures.