An optimum ethanol–water solvent system for extraction of podophyllotoxin: Experimental study, diffusivity determination and modeling

Optimization of pectinase-assisted and tri-solvent-mediated extraction and recovery of lycopene from waste tomato peels

In the present work, optimization of pectinase-assisted and tri-solvent-mediated extraction of lycopene from waste tomato peels was carried out. The optimized parameters for enzymatic pre-treatment were 2% pectinase concentration, pH 5.5, 4-h incubation, 45 °C and 150 rpm. Maximum recovery of lycopene from tomato peels using optimized tri-solvent extraction was achieved at 45 °C, 120-min incubation and 200 rpm. The extracted lycopene was confirmed through functional and characteristic peaks in UV-Vis and FTIR spectra and with retention time in HPLC. The radical scavenging activity was 72.30 ± 2.70 and 43.40 ± 2.01 µg ascorbic acid equivalents (AAE)/ml for 1,1-diphenyl-2-picrylhydrzyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radicals, respectively. The optimized method resulted in 7.38, 4.65 and 1.59 times enhancement in lycopene extraction and recovery in correlation with single solvent, enzyme-treated and tri-solvent extraction methods, respectively.

Pretreatments for the efficient extraction of bioactive compounds from plant-based biomaterials

The extraction of medicinal or functional compounds from herbal plants is an important unit operation in food and bio-industries. The target compounds are generally present inter- or intra-cellularly in an intricate microstructure formed by cells, intercellular spaces, capillaries, and pores. The major resistance of molecular diffusion in materials of plant origin always comes from the intact cell walls and adhering membranes. Therefore, increasing the permeability of cell walls and membranes plays a very important role to increase extraction yield and/or extraction rate. Important pretreatment methods to modify the cellular structures and increase the permeability of cell walls or membranes are discussed in this paper. They include physical, biologic, and chemical treatments. In physical methods, mechanical disruption, high-pressure (HP) process, pulsed electric field (PEF) application, ultrasonic treatment, and freeze-thaw, and so on were applied. In biologic methods, different cell wall-degrading enzymes were applied to break-down cell walls or membranes and to diminish the overall internal resistance for transporting bioactive compounds from internal matrix to the external solution. In chemical methods, various chemicals for increasing the inner- or outer-membrane permeabilization were introduced. The principles of the technologies, examples of improvements, and advantages and disadvantages of the pretreatment methods are critically reviewed in this paper.

One-step separation and purification of three lignans and one flavonol from Sinopodophyllum emodi by medium-pressure liquid chromatography and high-speed counter-current chromatography

INTRODUCTION

Lignans and flavonols are the primary constituents of Sinopodophyllum emodi and have been used as cathartic, anthelmintic, chemotherapeutic and anti-hypertensive compounds. Although these compounds have been isolated, there have been no reports on the separation of 4'-demethyl podophyllotoxin, podophyllotoxin, deoxypodophyllotoxin and kaempferol in one step by medium-pressure liquid chromatography (MPLC) and high-speed counter-current chromatography (HSCCC).

OBJECTIVE

Development of an efficient method for the preparative separation and purification of three lignans and one flavonol from S. emodi.

METHODS

The precipitate of crude extracts was first separated by MPLC into four parts, numbered GJ-1, GJ-2, GJ-3 and GJ-4. GJ-1 was separated and purified by HSCCC using a solvent system composed of n-hexane:ethyl acetate:methanol:water (1.75:1.5:1:0.75, v/v/v/v). The purities of the target compounds were assessed using high-performance liquid chromatography (HPLC) and chemical structures were identified by (1) H-NMR and (13) C-NMR.

RESULTS

The HSCCC and MPLC methods were successfully used for the preparative separation and purification of 4'-demethyl podophyllotoxin (8.5 mg, 92.4%), podophyllotoxin (40.1 mg, 92.1%), deoxypodophyllotoxin (4.6 mg, 98.1%), and kaempferol (1.6 mg, 96.7%) from a 100 mg sample.

CONCLUSION

Three lignans (4'-demethyl podophyllotoxin, podophyllotoxin, deoxypodophyllotoxin) and one flavonol (kaempferol) were successfully isolated by HSCCC and MPLC in one step.

Application of ultrasound as pretreatment for extraction of podophyllotoxin from rhizomes of Podophyllum peltatum

The effect of high-power ultrasound pretreatment on the extraction of podophyllotoxin from Podophyllum peltatum was investigated. Direct sonication by an ultrasound probe horn was applied at 24 kHz and a number of factors were investigated: particle size (0.18-0.6 mm), type of solvent (0-100% aqueous ethanol), ultrasonic treatment time (2-40 min), and power of ultrasound (0-100% power intensity, maximum power: 78 W). The optimal condition of ultrasound was achieved with 0.425-0.6 mm particle size, 10 min sonication time, 35 W ultrasound power, and water as the medium. There was no obvious degradation of podophyllotoxin with ultrasound under the applied conditions, and an improvement in extractability was observed. The SEM microscopic structure change of treated samples disclosed the effect of ultrasound on the tissue cells. The increased pore volume and surface area after ultrasonic treatment also confirmed the positive effect of ultrasound pretreatment on the extraction yield of podophyllotoxin from the plant cells.

Optimization of podophyllotoxin extraction method from Linum album cell cultures

CONTEXT

Suspension cultures of Linum album Kotschy ex Boiss. (Linaceae) accumulate podophyllotoxin (an anticancer agent) and could therefore serve as an alternative source of this important aryltetralin lactone lignan.

OBJECTIVE

The present work compared four podophyllotoxin extraction methods and optimization of the best one by using single factor experiments.

MATERIALS AND METHODS

Linum album cell cultures were established from in vitro plantlets and subcultured in MS medium with hormones every 7-8 days. Four podophyllotoxin extraction methods were assayed and the best one was optimized by single factor experiments, studying the effect of methanol concentration, extraction time, and sonication time.

RESULTS

Cell cultures accumulated enough podophyllotoxin to be analyzed by HPLC. The methanol/dichloromethane and buffer extraction methods were found to be the best. Methanol alone and hot ethanol were not effective for extracting podophyllotoxin.

DISCUSSION AND CONCLUSION

The optimized method based on methanol/dichloromethane extraction combined with HPLC quantification was able to determine small amounts of podophyllotoxin in Linum album cell cultures, showing that this system could constitute a possible alternative source of podophyllotoxin to Podophyllum (Berberidaceae).