Electrodialytic removal of fluoride from water: Effects of process parameters and accompanying anions

Recovery of Fluoride-Rich and Silica-Rich Wastewaters as Valuable Resources: A Resource Capture Ultrafiltration-Bipolar Membrane Electrodialysis-Based Closed-Loop Process

Traditional technologies such as precipitation and coagulation have been adopted for fluoride-rich and silica-rich wastewater treatment, respectively, but waste solid generation and low wastewater processing efficiency are still the looming concern. Efficient resource recovery technologies for different wastewater treatments are scarce for environment and industry sustainability. Herein, a resource capture ultrafiltration-bipolar membrane electrodialysis (RCUF-BMED) system was designed into a closed-loop process for simultaneous capture and recovery of fluoride and silica as sodium silicofluoride (Na₂SiF₆) from mixed fluoride-rich and silica-rich wastewaters, as well as achieving zero liquid discharge. This RCUF-BMED system comprised two key parts: (1) capture of fluoride and silica from two wastewaters using acid, and recovery of the Na₂SiF₆ using base by UF and (2) UF permeate conversion for acid/base and freshwater generation by BMED. With the optimized RCUF-BMED system, fluoride and silica can be selectively captured from wastewater with removal efficiencies higher than 99%. The Na₂SiF₆ recovery was around 72% with a high purity of 99.1%. The aging and cyclic experiments demonstrated the high stability and recyclability of the RCUF-BMED system. This RCUF-BMED system has successfully achieved the conversion of toxic fluoride and silica into valuable Na₂SiF₆ from mixed wastewaters, which shows great application potential in the industry-resource-environment nexus.

Management of Solid Waste Containing Fluoride-A Review

Technological and economic development have influenced the amount of post-production waste. Post-industrial waste, generated in the most considerable amount, includes, among others, waste related to the mining, metallurgical, and energy industries. Various non-hazardous or hazardous wastes can be used to produce new construction materials after the “solidification/stabilization” processes. They can be used as admixtures or raw materials. However, the production of construction materials from various non-hazardous or hazardous waste materials is still very limited. In our opinion, special attention should be paid to waste containing fluoride, and the reuse of solid waste containing fluoride is a high priority today. Fluoride is one of the few trace elements that has received much attention due to its harmful effects on the environment and human and animal health. In addition to natural sources, industry, which discharges wastewater containing F− ions into surface waters, also increases fluoride concentration in waters and pollutes the environment. Therefore, developing effective and robust technologies to remove fluoride excess from the aquatic environment is becoming extremely important. This review aims to cover a wide variety of procedures that have been used to remove fluoride from drinking water and industrial wastewater. In addition, the ability to absorb fluoride, among others, by industrial by-products, agricultural waste, and biomass materials were reviewed.

Electrodialysis Can Lower the Environmental Impact of Hemodialysis

The hemodialysis technique, used worldwide for patients with chronic kidney disease, is considered as a treatment with a high economic and ecological impact, especially for water consumption. Getting ultrapure water for the preparation of the dialysate to clean patient’s blood from toxins leads to high volumes of salt-enriched water that directly goes to sewage. The aim of this work is to propose operating conditions for electrodialysis to allow the reuse of reverse osmosis (RO) rejects. We first performed a parametric study to evaluate the influence of different parameters, such as flow rates, initial concentration, and applied voltage on the demineralization rate (DR) and specific energy consumption (SPC) with a NaCl model solution. The optimal conditions for desalination (i.e., a potential of 12 V, and flow rate of 20 L·h⁻¹) were then successfully applied to real samples collected from a dialysis center with total dissolved salts concentration of about 1.4 g/L (conductivity of 2.0 mS·cm⁻¹). We demonstrated that the choice of adequate conductivity targets allowed meeting the physico-chemical requirements to obtain water re-usable for either rehabilitation swimming pool, manual or machine washing of instruments before sterilization or irrigation. Saving this water could contribute in the reduction of the environmental impact of hemodialysis.

Development of Kaolin Clay as a Cost-Effective Technology for Defluoridation of Groundwater

Excessive fluoride in potable groundwater is a serious health problem in rural areas of many developing countries. The presence of a small amount of fluoride in potable water is beneficial to human health, but a high amount (>1.5 mg/L) has adverse effects. The present study is aimed to prepare a new cost-effective adsorbent of kaolin clay that can be used as a valuable defluoridating agent. Characterization of the prepared adsorbent was carried out using DSC, FTIR, TGA, and XRD. Also, the surface area of the adsorbent was measured by BET analysis. The clay was activated with concentrated H2SO4, and the effects of various experimental parameters such as temperature (25, 40, 50, and 60°C), pH (2, 4, 6, and 8), particle size (<0.075, 0.075–0.15, and 0.15–0.30 mm), contact time (30, 60, 90, 120, and 150 min), and dose of the adsorbents (0.5, 1, 1.5, 2.0, and 2.5 g) were investigated using a batch adsorption method. The specific surface area of raw and activated clay was found to be 10.598 m2/g and 5.258 m2/g, respectively. The optimum fluoride removal by both adsorbents was obtained at pH 4, temperature 50°C, particle size 0.075 mm, and 60 min. In both adsorbents, the degree of fluoride removal was increased with a decrease in the particle size of the adsorbent and increased contact time and dosage of the adsorbent. In all parameters, adsorption by activated clay was better than raw kaolin clay for retaining fluoride. The obtained data were well fitted with Freundlich and Langmuir isotherm models.

Membrane-based technologies for zero liquid discharge and fluoride removal from industrial wastewater

Several defluoridation techniques for reducing high initial fluoride concentration (IFC) in wastewater have been tested, but only a few of them have achieved the permissible standards. This study examined the hybrid crystallization-reverse osmosis technique (HRO) in light of flux, fluoride removal efficiency, fouling tendency, mineral recovery, complying zero liquid discharge (ZLD), and effluent discharge standard (EDS). Simulated wastewater with an IFC of 6600 mg/L was utilized and the final HRO performance was compared with those of the low-pressure (30 bar) standalone reverse osmosis (SRO), nanofiltration (SNF), and membrane distillation (SMD) processes. Accordingly, the study on SRO and SNF revealed that pressure, feed pH, membrane type, and IFC were the major factors affecting performance, and SRO was unable to sufficiently defluoridate wastewater with IFC >614 mg/L, needing pretreatment. Subsequently, the HRO process was selected and it was seen that the optimum calcium dose and respective final effluent pH for attaining EDS and ZLD were 16.5 g/L & 7.1 and 19.8 g/L & 5.7 respectively. The best operating pH for all conditions in HRO was approximately 9. Additionally, HRO showed good mineral recovery tendency and less organic fouling. The overall comparisons of flux and residual fluoride for HRO, SRO, SNF, and SMD were 49.3 LMH & 1.21 mg/L; 34.9 LMH & 62 mg/L, 44.05 LMH & 301 mg/L, and 38 LMH & 0.9 mg/L respectively. Therefore, low-pressure HRO can be applied to treat wastewater with high IFC; good tendency of mineral recovery, as good as that of SMD.

Removal of fluoride in membrane-based water and wastewater treatment technologies: Performance review

The presence of excess fluoride in aqueous media above local environmental standards (e.g., the U.S. Environmental Protection Agency (EPA) standard of 4 mg/L) affects the health of aquatic life. Excess fluoride in drinking water above the maximum contaminant level (e.g., the World Health Organization (WHO) standard of 1.5 mg/L) also affects the skeletal and nervous systems of humans. Fluoride removal from aqueous solutions is difficult using conventional electrochemical, precipitation, and adsorption methods owing to its ionic size and reactivity. Thus, new technologies have been introduced to reduce the fluoride concentration in industrial wastewater effluents and various drinking water sources. Membrane technology is one of the newer technologies found to be very effective in significantly reducing fluoride to desired standards levels; however, it has received less attention than other technologies because it is perceived as a costly process. This study critically reviewed the performance of various membrane process and compared it with effluent and zero liquid discharge (ZLD) standards. The performance review has been conducted with the consideration of the theoretical background, rejection mechanisms, technical viability, and parameters affecting flux and rejection performance. This review includes membrane systems investigated for the defluoridation process but operated under pressure (i.e., reverse osmosis [RO] and nanofiltration [NF]), temperature gradients (i.e., membrane distillation [MD]), electrical potential gradients (i.e., electrodialysis [ED] and Donnan dialysis [DD]), and concentration differences (i.e., forward osmosis [FO]). Moreover, the study also addressed the advantages, limitations, & applicable conditions of each membrane based defluoridation process.

Fluoride distribution and contamination in the water, soil and plants continuum and its remedial technologies, an Indian perspective- a review

Fluorine is an essential element required in trace amounts but gets toxic for human beings at levels more than 1.5 mg F^- L^-1 primarily through drinking contaminated water. It is the 13th most abundant element and constitutes about 0.06-0.09% in the earth crust. It is electronegative in aqueous medium forming fluoride ion (F^-). Fluoride contamination in the environment occurs mostly due to anthropogenic and geogenic sources. Fluoride is widely distributed in all components of environment, air (0.1-0.6 μg L^-1) soils (150-400 mg Kg^-1) rocks (100-2000 mg Kg^-1), plant (0.01-42 mg Kg^-1) and water (1.0-38.5 mg L^-1). Human beings and animals are being exposed to F^- primarily from water (0.2-42.0 mg L^-1) and plants (0.77-29.5 μg g^-1). Fluorosis, a health hazard due to F^- is a major problem in many countries across the world affecting about 200 million people globally. In India, > 62 million people in twenty states are facing problem due to F^-. The most affected states are Rajasthan (7670 habitations), Telangana (1,174 habitations) and Karnataka (1122 habitations). To mitigate this problem, there is an urgent need to understand the current status and brief knowledge of F^- geochemistry. The objective of this review is to highlight different sources of F^- that contaminate different environmental matrices including plants, the extent of contamination level in India, uptake, translocation and toxicity mechanism in plants. The review also highlights currently available mitigation methods or technologies through physio-chemical and biological means.

Removal of Fluoride from Water by Adsorption onto Fired Clay Pots: Kinetics and Equilibrium Studies

Excessive fluoride in potable water is a serious health problem in rural areas of many developing countries. Hence, there is a need to find a simple and cost-effective method for water defluoridation in such areas. In the northern part of Cameroon, clay pots are used for cooking food and water storage. The firing of these pots consists of intensive burning using fire wood. They were tested as a potential adsorbent for removing excess fluoride from water. Experiments were carried out in a jar test at room temperature (25 ± 2°C). Effects of contact time (0–90 min), pH (4, 5, 7, 8, and 9), stirring speed (60, 90, 120, and 200 rpm), and ionic strength (0–1000 mg/L) were investigated. Results showed that equilibrium was attained in 10 min whatever the pH. Pseudo-second-order and pore diffusion models described well the adsorption process. The highest amount of fluoride adsorbed (1.6 mg/g) was obtained at pH 4-5 and the optimum stirring speed is 120 rpm. Ionic strength has a significant effect on fluoride adsorption.

Preparation and characterization of novel polysulfone-red mud composite capsules for the removal of fluoride from aqueous solutions

This study is the first investigation on the encapsulation of red mud by a polysulfone matrix through a phase inversion process to obtain composite capsules for the removal of fluoride from aqueous solutions.

Arsenic and fluoride contaminated groundwaters: A review of current technologies for contaminants removal

Chronic contamination of groundwaters by both arsenic (As) and fluoride (F) is frequently observed around the world, which has severely affected millions of people. Fluoride and As are introduced into groundwaters by several sources such as water-rock interactions, anthropogenic activities, and groundwater recharge. Coexistence of these pollutants can have adverse effects due to synergistic and/or antagonistic mechanisms leading to uncertain and complicated health effects, including cancer. Many developing countries are beset with the problem of F and As laden waters, with no affordable technologies to provide clean water supply. The technologies available for the simultaneous removal are akin to chemical treatment, adsorption and membrane processes. However, the presence of competing ions such as phosphate, silicate, nitrate, chloride, carbonate, and sulfate affect the removal efficiency. Highly efficient, low-cost and sustainable technology which could be used by rural populations is of utmost importance for simultaneous removal of both pollutants. This can be realized by using readily available low cost materials coupled with proper disposal units. Synthesis of inexpensive and highly selective nanoadsorbents or nanofunctionalized membranes is required along with encapsulation units to isolate the toxicant loaded materials to avoid their re-entry in aquifers. A vast number of reviews have been published periodically on removal of As or F alone. However, there is a dearth of literature on the simultaneous removal of both. This review critically analyzes this important issue and considers strategies for their removal and safe disposal.

A Review on Adsorption of Fluoride from Aqueous Solution

Fluoride is one of the anionic contaminants which is found in excess in surface or groundwater because of geochemical reactions or anthropogenic activities such as the disposal of industrial wastewaters. Among various methods used for defluoridation of water such as coagulation, precipitation, membrane processes, electrolytic treatment, ion-exchange, the adsorption process is widely used. It offers satisfactory results and seems to be a more attractive method for the removal of fluoride in terms of cost, simplicity of design and operation. Various conventional and non-conventional adsorbents have been assessed for the removal of fluoride from water. In this review, a list of various adsorbents (oxides and hydroxides, biosorbents, geomaterials, carbonaceous materials and industrial products and by-products) and its modifications from literature are surveyed and their adsorption capacities under various conditions are compared. The effect of other impurities on fluoride removal has also been discussed. This survey showed that various adsorbents, especially binary and trimetal oxides and hydroxides, have good potential for the fluoride removal from aquatic environments.

Iron removal from brackish water by electrodialysis

The aim of this work is to study the removal of iron from brackish water using electrodialysis (ED). Experiments were carried out on synthetic brackish water solutions using a laboratory-scale ED cell. The influence of several parameters on process efficiency was studied. This efficiency is expressed by the removal rate, transport flux, current efficiency and power consumption. The applied voltage, the feed flow rate, the pH and iron initial concentration ofthe feed solution have a significant effect on the process efficiency and mainly on the iron transfer from dilute to concentrate compartment. Nevertheless, feed ionic strength does not have an effect on the iron removal. However, the effect is only noted on the specific power consumption.

An excellent fluoride sorption behavior of ceramic adsorbent

A new material, ceramic adsorbent, has been developed and undertaken to evaluate the feasibility for fluoride removal from aqueous environment. Batch experiments were performed to study the influence of various experimental parameters such as contact time (0-48 h), initial fluoride concentration (20-100 mg/L), pH (2-12) and the presence of competing anions on the adsorption of fluoride on ceramic adsorbent. The experimental data revealed that both the Langmuir and Freundlich isotherm models fitted well with the fluoride sorption process. The maximum adsorption capacity of ceramic adsorbent for fluoride removal was 2.16 mg/g. The optimum fluoride removal was observed between pH ranges of 4.0-11.0. The sorption process was well explained with pseudo-second-order kinetic model. The fluoride adsorption was decreased in the presence of phosphate followed by carbonate and sulfate. Results from this study demonstrated potential utility of ceramic adsorbent that could be developed into a viable technology for fluoride removal from aqueous environment.