A reverse microemulsion of water/AOT/1-butyl-3-methylimidazolium hexafluorophosphate for selective extraction of hemoglobin

Microemulsions as nano-reactors for the solubilization, separation, purification and encapsulation of bioactive compounds

Bioactive components possess various functionalities and are most interested for different food, nutraceutical and pharmaceutical formulations. The current review will discuss the preparation methods and fabrication techniques to design microemulsions (MEs) for the solubilization, separation, encapsulation and purification of various agro-food bioactive compounds. ME systems have shown suitable potential in enhancing oil recovery, protein extraction, and isolation of bioactive compounds. Moreover, the capability of ME based systems as drug and nutraceutical delivery cargos, and synthesis of various organic and inorganic nanoparticles, especially using biopolymers, will be investigated. ME liquid membranes are also developed as nano-extractor/nano-reactor vehicles, capable of simultaneous extraction, encapsulation or even synthesis of hydrophilic and lipophilic bioactive compounds for food, nutraceutical and drug applications.

Polymeric Ionic Liquid-Based Fluorescent Amphiphilic Block Copolymer Micelle for Selective and Sensitive Detection of p-Phenylenediamine

A highly sensitive and selective detection of p-phenylenediamine (PPD) is achieved by a fluorescence sensor, which is constructed by encapsulating the hydrophobic fluorescent 1-pyrenecarboxaldehyde (Py-CHO) into a polymeric ionic liquid (PIL)-based amphiphilic block copolymer (BCP) micelle. The amine-aldehyde condensation reaction between PPD and Py-CHO leads to the fluorescence quenching of Py-CHO, giving rise to the basis for the quantitative detection of PPD. The core cavity of the micelle formed by the self-assembly of PIL provides an excellent hydrophobic environment for the accommodation of fluorescent Py-CHO, offering significant improved sensitivity and selectivity for PPD detection. The amount of PIL in fabricating the amphiphilic BCP micelle, the BCP-Py-CHO micelle concentration, and the detection pH condition are investigated to obtain the best performance of this sensor. The accurate detection of PPD is achieved in the range of 0.02-10 μmol L^-1 under optimal conditions, and the detection limit is 0.007 μmol L^-1 (3σ/ s). The developed sensor is successfully applied to the determination of PPD contents in hair dyes, spiked water, and urine samples.

Improvement on the extraction efficiency of low density lipoprotein in an ionic liquid microemulsion

A novel microemulsion is developed at room temperature with 30 µL of sodium alginate sulfate (SAS, 0.02 mol/L), 0.005 g bis (2-ethylhexyl) succinate sulfonate (AOT) and 270 µL of 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF₆) ionic liquid as aqueous phase, surfactant and IL phase, respectively. The SAS/AOT/BmimPF₆ microemulsion significantly improves the extraction efficiency for low density lipoprotein (LDL). 96% LDL in a 300 µL of PBS is selectively extracted into a same volume of microemulsion, with respect to those of 67%, 76% and 85% by BmimPF₆, H₂O/AOT/BmimPF₆ microemulsion and sodium alginate (SA)/AOT/BmimPF₆ microemulsion. LDL in the SAS/AOT/BmimPF₆ microemulsion is distributed both in BmimPF₆ via hydrophobic interaction and in the "pools" of the microemulsion via electrostatic interaction with AOT and specific interaction between LDL with SAS. 83% of LDL in the microemulsion can be readily back extracted into an aqueous phase with 0.8% (m/v) of sodium dodecyl sulfate (SDS) as stripping reagent. For practical applications, LDL in human serum is selectively extracted with the microemulsion, as demonstrated by enzyme linked immunosorbent assay (ELISA) and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE).

Novel Fluorescent Microemulsion: Probing Properties, Investigating Mechanism, and Unveiling Potential Application

Nanoscale microemulsions have been utilized as delivery carriers for nutraceuticals and active biological drugs. Herein, we designed and synthesized a novel oil in water (O/W) fluorescent microemulsion based on isoamyl acetate, polyoxyethylene castor oil EL (CrEL), and water. The microemulsion emitted bright blue fluorescence, thus exhibiting its potential for active drug detection with label-free strategy. The microemulsion exhibited excitation-dependent emission and distinct red shift with longer excitation wavelengths. Lifetime and quantum yield of fluorescent microemulsion were 2.831 ns and 5.0%, respectively. An excellent fluorescent stability of the microemulsion was confirmed by altering pH, ionic strength, temperature, and time. Moreover, we proposed a probable mechanism of fluorochromic phenomenon, in connection with the aromatic ring structure of polyoxyethylene ether substituent in CrEL. Based on our findings, we concluded that this new fluorescent microemulsion is a promising drug carrier that can facilitate active drug detection with a label-free strategy. Although further research is required to understand the exact mechanism behind its fluorescence property, this work provided valuable guidance to develop new biosensors based on fluorescent microemulsion.

New horizons in the extraction of bioactive compounds using deep eutectic solvents: A review

With the rapid development of ionic liquid analogues, termed 'deep eutectic solvents' (DESs), and their application in a wide range of chemical and biochemical processes in the past decade, the extraction of bioactive compounds has attracted significant interest. Recently, numerous studies have explored the extraction of bioactive compounds using DESs from diverse groups of natural sources, including animal and plant sources. This review summarizes the-state-of-the-art effort dedicated to the application of DESs in the extraction of bioactive compounds. The aim of this review also was to introduce conventional and recently-developed extraction techniques, with emphasis on the use of DESs as potential extractants for various bioactive compounds, such as phenolic acid, flavonoids, tanshinone, keratin, tocols, terpenoids, carrageenans, xanthones, isoflavones, α-mangostin, genistin, apigenin, and others. In the near future, DESs are expected to be used extensively for the extraction of bioactive compounds from various sources.

Ionic-Liquid-Mediated Extraction and Separation Processes for Bioactive Compounds: Past, Present, and Future Trends

Ionic liquids (ILs) have been proposed as promising media for the extraction and separation of bioactive compounds from the most diverse origins. This critical review offers a compilation on the main results achieved by the use of ionic-liquid-based processes in the extraction and separation/purification of a large range of bioactive compounds (including small organic extractable compounds from biomass, lipids, and other hydrophobic compounds, proteins, amino acids, nucleic acids, and pharmaceuticals). ILs have been studied as solvents, cosolvents, cosurfactants, electrolytes, and adjuvants, as well as used in the creation of IL-supported materials for separation purposes. The IL-based processes hitherto reported, such as IL-based solid-liquid extractions, IL-based liquid-liquid extractions, IL-modified materials, and IL-based crystallization approaches, are here reviewed and compared in terms of extraction and separation performance. The key accomplishments and future challenges to the field are discussed, with particular emphasis on the major lacunas found within the IL community dedicated to separation processes and by suggesting some steps to overcome the current limitations.

Microemulsion-based lycopene extraction: Effect of surfactants, co-surfactants and pretreatments

Lycopene is a potent antioxidant that has received extensive attention recently. Due to the challenges encountered with current methods of lycopene extraction using hazardous solvents, industry calls for a greener, safer and more efficient process. The main purpose of present study was application of microemulsion technique to extract lycopene from tomato pomace. In this respect, the effect of eight different surfactants, four different co-surfactants, and ultrasound and enzyme pretreatments on lycopene extraction efficiency was examined. Experimental results revealed that application of combined ultrasound and enzyme pretreatments, saponin as a natural surfactant, and glycerol as a co-surfactant, in the bicontinuous region of microemulsion was the optimal experimental conditions resulting in a microemulsion containing 409.68±0.68 μg/glycopene. The high lycopene concentration achieved, indicates that microemulsion technique, using a low-cost natural surfactant could be promising for a simple and safe separation of lycopene from tomato pomace and possibly from tomato industrial wastes.

Transport properties of aqueous ionic liquid microemulsions: influence of the anion type and presence of the cosurfactant

Transport properties, viz. specific conductivity, dynamic viscosity and apparent diffusion coefficients, were measured as a function of water content in aqueous ionic liquid microemulsions containing 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF6] and bis(trifluoromethanesulphonyl)imide, [BMIM][Tf2N], stabilized by the nonionic surfactant TX-100, or its mixture with a cosurfactant, i.e. butanol. The investigation covered the whole water content range through various (Winsor I-III and dissolved solution) structures of the system. The comparative approach allowed closer inspection into phenomena being on the background of observed transport properties behavior taking into account the influence of the cosurfactant. The addition of butanol offers considerable advantages, such as an increase in conductivity, especially in systems containing ionic liquids with lower conductivity. This is accompanied by a significant decrease in viscosity, even to values that are comparable with those of molecular solvents. Moreover, the reasons for the surprisingly higher conductivity of [BMIM][PF6]-based systems were provided, and the conclusions were supported by cyclic voltammetry as well as spectrophotometric and dynamic light scattering measurements.

Ionic liquid poly(3-n-dodecyl-1-vinylimidazolium) bromide as an adsorbent for the sorption of hemoglobin

A novel polymeric ionic liquid, poly(1-vinylimidazolium-3-n-dodecyl) bromide, exhibits selective adsorption of hemoglobin from human whole blood.

Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples

A novel 1-butyl-3-methylimidazolium chloride ionic liquid surface imprinted solid-phase sorbent was synthesized. The as-prepared material was characterized by SEM, Brunauer-Emmett-Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C(n)mimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1-butyl-3-methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1-butyl-3-methyl imidazolium chloride ionic liquid. The average recoveries of 1-butyl-3-methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0-102.0% with the RSD lower than 5.8%.

Thermodynamic studies of partitioning behavior of cytochrome c in ionic liquid-based aqueous two-phase system

The ionic liquid/aqueous two-phase extraction systems (ATPSs) based on imidazolium ionic liquids were used to extract cytochrome c. Effects of the alkyl chain length of the ionic liquid cations, concentration of potassium citrate, temperature and pH on the extraction efficiency have been investigated. The thermodynamic parameters (ΔG(T)°, ΔH(T)° and ΔS(T)°) associated with Cyt-c partitioning in aqueous two phase systems were determined. Thermodynamic studies indicated that the partitioning of Cyt-c was driven by both hydrophobic and electrostatic interactions in the extraction process. Under the optimum conditions, experiment results showed that 94% of the cytochrome c could be extracted into the ionic liquid-rich phase in a one-step extraction. The structural characterization of Cyt-c in the IL ATPS was investigated by UV-vis and circular dichroism (CD) spectra. The results demonstrated that no direct bonding interaction observed between ionic liquid and cytochrome c, while the native properties of the cytochrome c were not altered. Compared with traditional liquid-liquid extractions based on toxic organic solvents, ionic liquid/aqueous two phase extraction offers clear advantages due to no use of volatile organic solvent and low consumption of imidazolium ionic liquids.