Studies on adsorption of phenol and 4-nitrophenol on MgAl-mixed oxide derived from MgAl-layered double hydroxide

Layered Double Hydroxide Materials: A Review on Their Preparation, Characterization, and Applications

Layered double hydroxides (LDHs), a type of synthetic clay with assorted potential applications, are deliberated upon in view of their specific properties, such as adsorbent-specific behavior, biocompatibility, fire-retardant capacity, and catalytic and anion exchange properties, among others. LDHs are materials with two-dimensional morphology, high porosity, and exceptionally tunable and exchangeable anionic particles with sensible interlayer spaces. The remarkable feature of LDHs is their flexibility in maintaining the interlayer spaces endowing them with the capacity to accommodate a variety of ionic species, suitable for many applications. Herein, some synthetic methodologies, general characterizations, and applications of LDHs are summarized, encompassing their broader appliances as a remarkable material to serve society and address several problems viz. removal of pollutants and fabrication of sensors and materials with multifaceted useful applications in the medical, electrochemical, catalytic, and agricultural fields, among others.

Rational design, synthesis, and applications of carbon-assisted dispersive Ni-based composites

Herein, we review recent developments in the rational design and engineering of various carbon-assisted dispersive nickel-based composites, and boosted properties for protein adsorption and nitroaromatics reduction.

Functionalized layered double hydroxides composite bio-adsorbent for efficient copper(II) ion encapsulation from wastewater

In this study, naturally abundant and inexpensive bamboo was used to make cheaper activated charcoal for efficient encapsulation of toxic copper (Cu(II)) ion from wastewater. The functionalized bamboo charcoal-Layered double hydroxides (BC-LDHs) composite bio-adsorbent was prepared using co-precipitation method. The composite bio-adsorbent was exploited to eliminate Cu(II) ion with high sensitivity and selectivity from contaminated water. The adsorption parameters including the effect of pH, contact time, adsorbent dose, and effect of initial concentration were optimized in systematic way and the adsorption kinetics and isotherms were investigated for potential use in real sample treatment. The physicochemical properties and morphological structure of the adsorbent were examined using X-ray Diffraction, Scanning Electronic Microscopy, Fourier Transform Infrared Spectroscopy and Thermogravimetric Analysis to understand the Cu(II) ion adsorption mechanism. The adsorption results revealed that the BC-LDH could remove almost 100% of Cu(II) ion from aqueous solution at pH range between 3.0 and 6.0 within 30 min. The maximum monolayer adsorption capacity was determined to be 85.47 mg/g based on the Langmuir isotherm. The adsorption equilibrium data were well-fitted by the Langmuir isotherm model (R² = 0.998) and the experimental kinetic data were supported by the pseudo-second order model (R² = 0.999). The BC-LDH could be reused without losing its adsorption performance in several cycles after successful regeneration with 0.10 M HCl. The Cu(II) ion removal mechanism was postulated with intercalated ion exchange, surface precipitation and interaction between BC-LDH and surface functionalities. Therefore, the highly functional BC-LDH composite could be a promising adsorbent for efficient Cu(II) ion removal from wastewater.

Application of layered double hydroxide-biochar composites in wastewater treatment: Recent trends, modification strategies, and outlook

In recent years, layered double hydroxide-biochar (LDH-BC) composites as adsorbents and catalysts for contaminants removal (inorganic anions, heavy metals, and organics) have received increasing attention and became a new research point. It is because of the good chemical stability, abundant surface functional groups, excellent anion exchange ability, and good electronic properties of LDH-BC composites. Hence, we offer an overall review on the developments and processes in the synthesis of LDH-BC composites as adsorbents and catalysts. Special attention is devoted to the strategies for enhancing the properties of LDH-BC composites, including (1) magnetic treatment, (2) acid treatment, (3) alkali treatment, (4) controlling metal ion ratios, (5) LDHs intercalation, and (6) calcination. In addition, further studies are called for LDH-BC composites and potential areas for future application of LDH-BC composites are also proposed.

Development of an efficient remediation system with a low cost after identification of water pollutants including phenolic compounds in a tannery built-up area in Bangladesh

Water pollution caused by tannery wastewater is an important issue in developing countries. Most studies have focused on inorganic chemicals represented by chromium as a tannery-related main pollutant. This is the first study in which pollution of water by tannery-related organic chemicals was assessed by a combination of qualitative and quantitative analyses. Our quantitative analysis showed that the maximum concentration of total phenolic compounds (phenols), consisting of phenol, bisphenol F, p-cresol and chlorocresol, in canal water in a tannery built-up area in Bangladesh was >67-fold higher than the Environmental, Health and Safety (EHS) guideline value. Mapping of our results indicated tanneries as the sources of phenols pollution. Our original depurative, a hydrotalcite-like compound consisting of magnesium and iron (MF-HT), could adsorb all kinds of phenols and exhibited the highest phenol adsorption ability (115.8 mg/g) among reported hydrotalcite-like compounds. The levels of phenols in canal water samples were reduced to levels below the guideline value by using MF-HT with assistance of a photocatalytic reaction. Moreover, the mean level of chromium (112.2 mg/L) in canal water samples was decreased by 99.7% by using the depurative. Thus, the depurative has the potential for solving the problem of tannery-related water pollution by phenols and chromium.

Effect of Drying on the Fabrication of MgAl Layered Double Hydroxides

This study aimed to evaluate the synthesis of MgAl/LDH from the drying process perspective, evaluating the influence of temperature (75-90 °C) and time (16-20 h) in the drying process. The synthesis was performed, maintaining a ratio of 2:1 of Mg/Al, and the drying was conducted according to a 2² experimental design: four axial points and three repetitions at the central point. The surface area and pore diameter ranged from 4.09 to 18.55 m²/g and 12.50 to 24.46 nm. Fourier transform infrared (FTIR) analysis indicated the drying-caused variation of the LDH typical bands intensities. Scanning electron microscopy (SEM) images showed the tendency of the increase of agglomeration with the temperature elevation. The drying parameters' influence was evident for X-ray diffraction (XRD) analysis observing the crystallite size increment, from 13.10 to 38.94 nm, and basal spacing variation, from 7.52 to 7.64 Å. The statistical models for growing crystal and reduction of the basal spacing were physically consistent but with low values of R ². The drying time and temperature had a considerable influence on the chemical, physical, structural, and morphological properties of LDH.

Implications of layered double hydroxides assembled biochar composite in adsorptive removal of contaminants: Current status and future perspectives

In recent years, biochar composites have received considerable attention for environmental applications. This paper reviews the current state of research on Layered Double Hydroxides (LDHs) tailored biochar composites in terms of their synthesis methods, characteristics, and their use as adsorbents for the removal of various pollutants from water, highlighting and discussing the key advancement in this area. The adsorption potential of LDHs-biochar composites for different inorganic and organic contaminants, important factors affecting composites' properties and the adsorption process, and the mechanisms involved in adsorption are discussed in this review. Though the adsorption capacities are high for the composites studied, partition coefficient which suggest the performance of composites remain low for most adsorbents. Despite the recent progress in the synthesis of LDHs-biochar composites, further research is needed to improve the performance of composites for different classes of aquatic pollutants, and to test their applicability in pilot-scale with real wastewater under real environmental conditions.

Activity in the Photodegradation of 4-Nitrophenol of a Zn,Al Hydrotalcite-Like Solid and the Derived Alumina-Supported ZnO

A Zn,Al layered double hydroxide (LDH), with the hydrotalcite structure and the mixed oxide obtained upon its calcination at 650 °C, was tested in the adsorption and photocatalytic degradation of 4-Nitrophenol in aqueous solution. The Zn,Al LDH was fast and easily obtained by the coprecipitation method. Hydrothermal treatment under microwave irradiation was applied to compare the effect of the ageing treatment on the photocatalytic behavior. The efficiency of the synthetized solids was compared to that of a commercial ZnO. The ageing treatment did not improve the performance of the original samples in the degradation of 4-nitrophenol. The activity of the synthetized solids tested exceeded that observed for the reaction with commercial ZnO. The photocatalytic performance of the original non-calcined hydrotalcite is similar to that of commercial ZnO. The calcined hydrotalcite showed a better performance in the adsorption-degradation of the contaminant than ZnO, and its reusability would be possible as it recovered the hydrotalcite-like structure during the reaction.

Copper hexacyanoferrate nanocrystal as a highly efficient non-noble metal catalyst for reduction of 4-nitrophenol in water

As Prussian Blue analogues (PBAs) represent one of the most classical families of coordination compounds and exhibit versatile catalytic activities, PBAs have been considered as useful heterogeneous catalysts for reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). Nevertheless, while Cu has been a well-proven transition metal for 4-NP reduction, especially, due to their ability to attain pronounced conversions of reactants under mild conditions, environmental friendliness and great stability. Nevertheless, while Cu has been a well-proven transition metal for 4-NP reduction, Cu-based PBA has never been developed and thoroughly investigated for 4-NP reduction. Thus, in this study, copper hexacyanoferrate, Cu^II₃[Fe(CN)₆]₂ (CuFeCN) is particularly synthesized and proposed for the first time as a catalyst for reduction of 4-NP in the presence of NaBH₄. CuFeCN exhibits a very high catalytic activity towards reduction of 4-NP to 4-AP with 100% conversion within 4 min. The activity factor (AF) at room temperature, 8057.14 s^-1 g^-1, is between 1 and 2 orders higher than all other MFeCN Prussian blue analogues (M = Co, Fe, Ni, Zn, and Mn). In addition, CuFeCN shows excellent reusability to achieve 100% conversion of 4-NP to 4-AP with highly stable rate constants over successive 7 cycles. The activation energy (E_a) and turn over frequency (TOF) for the reduction of 4-NP to 4-AP catalyzed by CuFeCN system are determined as 24.6 kJ mol^-1 and 36.93 min^-1, respectively, which are both significantly more superior than most of reported catalysts in literatures. These advantageous properties make CuFeCN ideal to be developed into a promising catalyst for elimination of nitroaromatic contaminants in water.

Syagrus oleracea-activated carbon prepared by vacuum pyrolysis for methylene blue adsorption

This work aims to produce activated carbon from the endocarp of Syagrus oleracea by vacuum pyrolysis and evaluate its potential as an adsorbent. The effects of pyrolysis temperature (400 °C, 500 °C, 600 °C, and 700 °C), particle diameter (0.467 mm, 0.267 mm, and lower than 0.234 mm), and activation agent (H₂SO₄, H₂PO₃, and KOH) on the potential for methylene blue adsorption were investigated. In addition, kinetics and adsorption equilibrium were evaluated. The best condition found was particle diameter < 0.234 mm, final pyrolysis temperature of 700 °C, and using KOH. Adsorption kinetics followed pseudo-second order, with equilibrium reached within 20 min. Isotherms followed the Freundlich model. Values of adsorption capacity were in the order of 30 mg/g. Thermodynamic parameters indicated that adsorption occurred spontaneously with a reduction in the heterogeneity of the solid interface/solution. The results obtained demonstrate the great adsorption capacity of the activated carbon prepared from endocarp of Syagrus oleracea via vacuum pyrolysis for the removal of up to 98% methylene blue from aqueous solutions.

Zn–Fe-layered double hydroxide intercalated with vanadate and molybdate anions for electrocatalytic water oxidation

The electrocatalytic water oxidation behavior of Zn–Fe–NO₃–LDH, Zn–Fe–VO₄-LDH and Zn–Fe–MoO₄–LDH has been investigated.

Preparation of rhamnolipid-layered double hydroxide nanocomposite for removing p-cresol from water

Rhamnolipid (RL)-modified Mg3Al-layered double hydroxide (LDH) was prepared as p-cresol adsorbent by ion exchange (RL-LDH1) and delamination/reassembling (RL-LDH2) method, respectively. The basal spacing of RL-LDH1 ( d003 = 3.22 nm) and RL-LDH2 ( d003 = 3.39 nm) was significantly increased compared with Mg3Al LDH ( d003 = 0.90 nm) due to the intercalation of RL anions between the LDH layers. The reduced surface area of RL-LDH nanocomposites demonstrated their strong hydrophobic property. The highest adsorption capacity of RL-LDH2 for p-cresol was intimately related to its stacking model of the interlayer hydrophobic moiety and higher RL (organic carbon) content. The linear model well fitted for p-cresol adsorption isotherms, implying a partitioning adsorption process. Along with the effect of temperature on p-cresol adsorption, an adsolubilization mechanism and an exothermic adsorption nature during adsorption process were revealed.

One-pot synthesis of carbon supported calcined-Mg/Al layered double hydroxides for antibiotic removal by slow pyrolysis of biomass waste

A biochar supported calcined-Mg/Al layered double hydroxides composite (CLDHs/BC) was synthesized by a one-pot slow pyrolysis of LDHs preloaded bagasse biomass. Multiple characterizations of the product illustrated that the calcined-Mg/Al layered double hydroxides (CLDHs) were successfully coated onto the biochar in slow pyrolysis of pre-treated biomass. The as-synthesized CLDHs/BC could efficiently remove antibiotic tetracycline from aqueous solutions. The coating of CLDHs significantly increased the adsorption ability of biochar, and CLDHs/BC exhibited more than 2 times higher adsorption capacity than that of the pristine biochar (BC) in the tested pH range. The maximum adsorption capacity of CLDHs/BC for tetracycline was 1118.12 mg/g at 318 K. The experimental results suggested that the interaction with LDHs on biochar played a dominant role in tetracycline adsorption, accompanied with π–π interaction and hydrogen bond. This study provides a feasible and simple approach for the preparation of high-performance material for antibiotics contaminated wastewater treatment in a cost-effective way.

Biochar pyrolyzed from MgAl-layered double hydroxides pre-coated ramie biomass (Boehmeria nivea (L.) Gaud.): Characterization and application for crystal violet removal

A novel biochar/MgAl-layered double hydroxides composite (CB-LDH) was prepared for the removal of crystal violet from aqueous solution by pyrolyzing MgAl-LDH pre-coated ramie stem (Boehmeria nivea (L.) Gaud.). Pyrolysis played dual role for both converting biomass into biochar and calcining MgAl-LDH during the pyrolysis process. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray analysis (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) and zeta potential analysis were used to characterize the CB-LDH. The results of characterization suggested that the calcined LDH was successfully synthesized and coated on biochar. The resulted CB-LDH had higher total pore volume and more functional groups than the pristine biochar. Adsorption experimental data fitted well with the pseudo-second order kinetics model and the Freundlich isotherm model. The rate-controlled step was controlled by film-diffusion initially and then followed by intra-particle diffusion. Thermodynamic analysis showed that the adsorption of crystal violet was a spontaneous and endothermic process. The higher pH and temperature of the solution enhanced the adsorption performance. CB-LDH could also have excellent ability for the removal of crystal violet from the actual industrial wastewater and groundwater with high ionic strength. LDH adsorption, electrostatic attraction, pore-filling, π-π interaction and hydrogen bond might be the main mechanisms for crystal violet adsorption on CB-LDH. The results of this study indicated that CB-LDH is a sustainable and green adsorbent with high performance for crystal violet contaminated wastewater treatment and groundwater remediation.

Comparison and evaluation of five types of imidazole-modified silica adsorbents for the removal of 2,4-dinitrophenol from water samples with the methyl group at different positions of imidazolium ring

The objective of this work was to improve the understanding the influence of the methyl group at different positions of imidazolium ring on the adsorption behaviors of imidazole-modified silica adsorbents. Five adsorbents named as SilprImCl, SilprM₁ImCl, SilprM₂ImCl, SilprM₄ImCl and SilprM₁M₂ImCl were synthesized using imidazole, 1-methylimidazole, 2-methylimidazole, 4-methylimidazole and 1,2-dimethylimidazole, respectively. These adsorbents were characterized by scanning electron microscope, infrared spectra, thermogravimetric analysis, elemental analysis and BET analysis. Firstly, phenol, 2-nitrophenol (2-NP), 3-nitrophenol (3-NP), 4-nitrophenol (4-NP) and 2,4-dinitrophenol (2,4-DNP) were used as adsorbates to investigate the selectivity of SilprImCl and its adsorption capacities followed the order of 2,4-DNP≫4-NP>2-NP≫3-NP>phenol. Therefore, 2,4-DNP was used to investigate the adsorption behaviors of the five adsorbents. It was inferred that the adsorbents are of primary anion-exchange and electrostatic nature. The electrostatic nature was affected significantly by the methyl group at different positions of imidazolium ring. The adsorbed amounts of 2,4-DNP decreased in the order of: SilprM₁M₂ImCl≈SilprM₁ImCl>SilprM4ImCl>SilprM₂ImCl>SilprImCl. The adsorption-elution experiments indicated that 2,4-DNP can be removed from aqueous solutions by a SilprM₄ImCl packed column and the recovery of 91.6% was obtained. The adsorbent could be regenerated and reused ten times at least by simple washings with HCl and water in turn.

Enhanced remediation of Cr(VI)-contaminated soil by incorporating a calcined-hydrotalcite-based permeable reactive barrier with electrokinetics

This paper describes the enhanced Cr(VI)-contaminated soil remediation via a combination of electrokinetics (EK) with a calcined-hydrotalcite-based permeable reactive barrier (PRB). First, this combination proved to be feasible, and remarkably facilitated Cr(VI) remediation in a column test. Then, lightly-to-severely (0.16-1.65 mg/g) Cr(VI)-contaminated soil was remediated in a simulated test with the calcined hydrotalcite as the PRB under an voltage of 10-30 V (i.e. an electric field intensity of 0.7-2.0 V/cm). The observations demonstrated that both PRB and EK are critical to efficient remediation and the high de-contamination efficiency is supposedly attributed to the synergistic effect, for which EK concentrates anionic chromate to the anode region and PRB media (calcined hydrotalcite) absorbs and immobilizes it. Thus we have shown that the combined PRB-EK system is highly adaptive and effective in remediation of a larger area contaminated with chromate and various anionic pollutants.

Comparison of 4-chloro-2-nitrophenol adsorption on single-walled and multi-walled carbon nanotubes

The adsorption characteristics of 4-chloro-2-nitrophenol (4C2NP) onto single-walled and multi-walled carbon nanotubes (SWCNTs and MWCNTs) from aqueous solution were investigated with respect to the changes in the contact time, pH of solution, carbon nanotubes dosage and initial 4C2NP concentration. Experimental results showed that the adsorption efficiency of 4C2NP by carbon nanotubes (both of SWCNTs and MWCNTs) increased with increasing the initial 4C2NP concentration. The maximum adsorption took place in the pH range of 2–6. The linear correlation coefficients of different isotherm models were obtained. Results revealed that the Langmuir isotherm fitted the experimental data better than the others and based on the Langmuir model equation, maximum adsorption capacity of 4C2NP onto SWCNTs and MWCNTs were 1.44 and 4.42 mg/g, respectively. The observed changes in the standard Gibbs free energy, standard enthalpy and standard entropy showed that the adsorption of 4C2NP onto SWCNTs and MWCNTs is spontaneous and exothermic in the temperature range of 298–328 K.

Enhanced removal of triphosphate by MgCaFe-Cl-LDH: synergism of precipitation with intercalation and surface uptake

Triphosphate (TPP) is an important form of phosphate pollutants while its removal investigation has been just started now. This research examined the removal of triphosphate using Mg(2-x)Ca(x)FeCl-LDH (x = 0-2) as absorbents. We found that the removal of triphosphate over Mg(2)FeCl-LDH mainly underwent the surface adsorption and the near-edge intercalation, with the practical removal amount (9-11 mg(P)/g) corresponding to 10-15% of the theoretical one. In contrast, Ca(2)FeCl-LDH removed a higher amount of triphosphate (56.4 mg(P)/g). The comprehensive analysis of the triphosphate-uptake products with XRD/XPS/FTIR reveals that Ca(2)FeCl-LDH dissolves first and then released Ca(2+) ions react with triphosphate (TPP) to form insoluble Ca-TPP precipitate. Combination of these two different removal mechanisms enables Mg(0.5)Ca(1.5)FeCl-LDH to take up 84.2mg(P)/g from aqueous solution under similar conditions.