Preparation and characterization of ECTFE solvent resistant membranes and their application in pervaporation of toluene/water mixtures

Preparation, Modification, and Application of Ethylene-Chlorotrifluoroethylene Copolymer Membranes

Ethylene-chlorotrifluoroethylene (ECTFE) was first commercialized by DuPont in 1974. Its unique chemical structure gives it high heat resistance, mechanical strength, and corrosion resistance. But also due to these properties, it is difficult to prepare a membrane from it by the nonsolvent-induced phase separation (NIPS) method. However, it can be prepared as a microfiltration membrane using the thermally induced phase separation (TIPS) method at certain temperatures and with the selection of suitable solvents, and the use of green solvents is receiving increasing attention from researchers. The surface wettability of ECTFE membranes usually needs to be modified before use to strengthen its performance to meet the application requirements, usually by graft modification and surface oxidation techniques. This paper provides an overview of the structure of ECTFE and its preparation and modification methods, as well as recent advances in its application areas and prospects for the future methods of preparing high-performance ECTFE membranes.

Isothermal and Non-Isothermal Crystallization Kinetics of Poly(ethylene chlorotrifluoroethylene)

The isothermal (IT) and non-isothermal (NIT) crystallization kinetics, morphology, and structure of poly(ethylene chlorotrifluoroethylene) (ECTFE) were investigated via differential scanning calorimetry (DSC), polarized optical microscopy (POM), and wide-angle X-ray diffraction (XRD). The Avrami equation could well describe the overall IT crystallization process of ECTFE, and, furthermore, the overall crystallization rate decreased at higher crystallization temperatures (T_c). The equilibrium melting point for ECTFE was found to be 238.66 °C. The activation energies for IT and NIT crystallization were determined as −137.68 and −120.54 kJ/mol, respectively. The Jeziorny model fitted well with the initial stages of NIT melt crystallization, while deviations from linearity in the later stages of the process were due to the collisions of spherulites. Spherulites of ECTFE organized in a hexagonal crystal system were found. The relative crystalline degree of ECTFE under NIT conditions was about 54.55%, and this decreased with the increase in cooling rate. Moreover, the Ozawa and Mo models were suitable for modeling the overall NIT crystallization process of ECTFE.

Preparation of ECTFE Porous Membrane for Dehumidification of Gaseous Streams through Membrane Condenser

Due to the good hydrophobicity and chemical resistance of poly(ethylene trifluoroethylene) (ECTFE), it has been an attractive potential material for microfiltration, membrane distillation and more. However, few porous hydrophobic ECTFE membranes were prepared by thermally induced phase separation (TIPS) for membrane condenser applications. In this work, the diluent, di-n-octyl phthalate (DnOP), was selected to prepare the dope solutions. The calculated Hassen solubility parameter indicated that ECTFE has good compatibility with DnOP. The corresponding thermodynamic phase diagram was established, and it has been mutually verified with the bi-continuous structure observed in the SEM images. At 30 wt% ECTFE, the surface contact angle and liquid entry pressure reach their maximum values of 139.5° and 0.71 MPa, respectively. In addition, some other basic membrane properties, such as pore size, porosity, and mechanical properties, were determined. Finally, the prepared ECTFE membranes were tested using a homemade membrane condenser setup. When the polymer content is 30 wt%, the corresponding results are better; the water recovery and condensed water yield is 17.6% and 1.86 kg m⁻² h⁻¹, respectively.

Green Approaches for Sustainable Development of Liquid Separation Membrane

Water constitutes one of the basic necessities of life. Around 71% of the Earth is covered by water, however, not all of it is readily available as fresh water for daily consumption. Fresh water scarcity is a chronic issue which poses a threat to all living things on Earth. Seawater, as a natural resource abundantly available all around the world, is a potential water source to fulfil the increasing water demand. Climate-independent seawater desalination has been touted as a crucial alternative to provide fresh water. While the membrane-based desalination process continues to dominate the global desalination market, the currently employed membrane fabrication materials and processes inevitably bring adverse impacts to the environment. This review aims to elucidate and provide a comprehensive outlook of the recent efforts based on greener approaches used for desalination membrane fabrication, which paves the way towards achieving sustainable and eco-friendly processes. Membrane fabrication using green chemistry effectively minimizes the generation of hazardous compounds during membrane preparation. The future trends and recommendations which could potentially be beneficial for researchers in this field are also highlighted.

Membrane Technologies in Wastewater Treatment: A Review

In the face of water shortages, the world seeks to explore all available options in reducing the over exploitation of limited freshwater resources. One of the surest available water resources is wastewater. As the population grows, industrial, agricultural, and domestic activities increase accordingly in order to cater for the voluminous needs of man. These activities produce large volumes of wastewater from which water can be reclaimed to serve many purposes. Over the years, conventional wastewater treatment processes have succeeded to some extent in treating effluents for discharge purposes. However, improvements in wastewater treatment processes are necessary in order to make treated wastewater re-usable for industrial, agricultural, and domestic purposes. Membrane technology has emerged as a favorite choice for reclaiming water from different wastewater streams for re-use. This review looks at the trending membrane technologies in wastewater treatment, their advantages and disadvantages. It also discusses membrane fouling, membrane cleaning, and membrane modules. Finally, recommendations for future research pertaining to the application of membrane technology in wastewater treatment are made.

Binary mixtures of semicrystalline polymers with low-molecular-mass compounds: thermal behaviour and phase structure

The results of phase equilibrium studies in mixtures of semicrystalline polymers with low-molecular-mass compounds are summarized and analyzed. A new classification of phase diagrams for such mixtures is proposed. Alternative points of view on the phase composition of semicrystalline polymers are presented. The phase structure evolution during the thermally induced phase separation of mixtures is monitored and the morphology of the forming capillary porous bodies as precursors of polymeric membranes is described. The general regularities concerning the influence of the nature of mixture components, polymer molecular mass, temperature scanning rate and other factors on the topology of phase diagrams are considered. Experimental methods used to construct the phase diagrams of mixtures and to study features of their phase structure are compared.

The bibliography includes 203 references.

Flower and Leaf Extracts of Sambucus nigra L.: Application of Membrane Processes to Obtain Fractions with Antioxidant and Antityrosinase Properties

This study aimed at evaluating and comparing the chemical profile as well as the antityrosinase and antioxidant activities of ethanol (EtOH) and methanol (MeOH) extracts of Sambucus nigra L. (Adoxaceae) flowers and leaves in order to discover new candidates for food additives and cosmetic and pharmaceutical products. For this purpose, a novel lower-melting-point ethylene-chlorotrifluoroethylene (LMP ECTFE) nanofiltration (NF) membrane was employed in order to produce the concentrated fractions of S. nigra. Floral extracts were richer in phytochemicals in comparison to the leaf extracts. The High-performance liquid chromatography (HPLC) profile revealed rutin, quercetin, protocateuchic acid, 3,5-dicaffeoylquinic acid, and neochlorogenic acid as the most abundant compounds. Ferric reducing antioxidant power (FRAP), 2,2’-diphenil-1-picrylhydrazil (DPPH) radical scavenging, and 2,2’-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) tests were used to investigate the antioxidant properties. NF retentate fractions of floral ethanol extracts exerted the highest tyrosinase inhibitory activity with an IC₅₀ of 53.9 µg/mL and the highest ABTS radical scavenging activity (IC₅₀ of 46.4 µg/mL). In conclusion, the present investigation revealed the potential benefits of NF application in S. nigra extracts processing, suggesting the use of retentate fractions as a promising source for antioxidant and tyrosinase inhibitory compounds which could pave the way for future applications.

ECTFE membranes produced by non-toxic diluents for organic solvent filtration separation

A new grade of ethylene-chlorotrifluoroethylene, low melting point HALAR® ECTFE (LMP ECTFE), was studied and used as a polymer for the preparation of solvent-resistant flat-sheet membranes.

Fabrication and properties of poly(ethylene chlorotrifluoroethylene) membranes via thermally induced phase separation (TIPS)

Poly(ethylene chlorotrifluoroethylene) (ECTFE) porous membranes have been fabricated via thermally induced phase separation (TIPS).