Simultaneous separation of iodide and cesium ions from dilute wastewater based on PPy/PTCF and NiHCF/PTCF electrodes using electrochemically switched ion exchange method

Cesium adsorption from an aqueous medium for environmental remediation: A comprehensive analysis of adsorbents, sources, factors, models, challenges, and opportunities

Considering the widespread and indispensable nature of nuclear energy for future power generation, there is a concurrent increase in the discharge of radioactive Cs into water streams. Recent studies have demonstrated that adsorption is crucial in removing Cs from wastewater for environmental remediation. However, the existing literature lacks comprehensive studies on various adsorption methods, the capacities or efficiencies of adsorbents, influencing factors, isotherm and kinetic models of the Cs adsorption process. A bibliometric and comprehensive analysis was conducted using 1179 publications from the Web of Science Core Collection spanning from 2014 to 2023. It reviews and summarizes current publication trends, active countries, adsorption methods, adsorption capacities or efficiencies of adsorbents, tested water sources, influencing factors, isotherm, and kinetic models of Cs adsorption. The selection of suitable adsorbents and operating parameters is identified as a crucial factor. Over the past decade, due to their notable capacity for Cs adsorption, considerable research has focused on novel adsorbents, such as Prussian blue, graphene oxide, hydrogel, and nanoadsorbents (NA). However, there remains a need for further development of application-oriented laboratory-scale experiments. Future research directions should encompass exploring adsorption mechanisms, developing new adsorbents or their combinations, practical applications of lab-scale studies, and recycling radioactive Cs from wastewater. Drawing upon this literature review, we present the most recent research patterns concerning adsorbents to remove Cs, outline potential avenues for future research, and delineate the obstacles hindering effective adsorption. This comprehensive bibliometric review provides valuable insights into prevalent research focal points and emerging trends, serving as a helpful resource for researchers and policymakers seeking to understand the dynamics of adsorbents for Cs removal from water.

Electro-intensified simultaneous decontamination of coexisting pollutants in wastewater

The treatment of wastewater has become increasingly challenging as a result of its growing complexity. To achieve synergistic removal of coexisting pollutants in wastewater, one promising approach involves the integration of electric fields. We conducted a comprehensive literature review to explore the potential of integrating electric fields and developing efficient electro-intensified simultaneous decontamination systems for wastewater containing coexisting pollutants. The review focused on comprehending the applications and mechanisms of these systems, with a particular emphasis on the deliberate utilization of positive and negative charges. After analyzing the advantages, disadvantages, and application efficacy of these systems, we observed electro-intensified systems exhibit flexible potential through their rational combination, allowing for an expanded range of applications in addressing simultaneous decontamination challenges. Unlike the reviews focusing on single elimination, this work aims to provide guidance in addressing the environmental problems resulting from the coexistence of hazardous contaminants.

MXene/AgNW composite material for selective and efficient removal of radioactive cesium and iodine from water

Toxic fission products, such as cesium (137Cs) and iodine (129I) are of great concern because of their long half-lives and high solubility in water. The simultaneous removal of Cs and I using a single adsorbent is an area of increasing interest. In this study, MXene/silver nanowire (AgNW) composite was synthesized through physical mixing and employed for simultaneous removal of iodide (I-) and cesium (Cs+) ions from contaminated water. The MXene/AgNW composite demonstrated excellent adsorption capacities of 84.70 and 26.22 mg/g for I- and Cs+, respectively. The experimental data supported the hypothesis of multilayer adsorption of Cs+ owing to the inter-lamellar structures and the presence of heterogeneous adsorption sites in MXene. The interaction between I- and the AgNW involved chemisorption followed by monolayer adsorption. MXene/AgNW composite material exhibited promising results in the presence of competitive ions under extreme pH conditions. Thus, synthesized composite materials holds promising potential as an adsorbent for the remediation of radioactive liquid waste.

Highly efficient iodine capture and ultrafast fluorescent detection of heavy metals using PANI/LDH@CNT nanocomposite

Here, the hybrid material of polyaniline/layered double hydroxide@carbonnanotubes (PANI/LDH@CNT) is considered a multifunctional material. Instrumental methods, including FTIR, XRD, TEM, SEM, and TGA/DTA were utilized to characterize PANI/LDH@CNT. The polymerization method created PANI/LDH@CNT as an adsorbent to remove toxic iodine in hexane solution with a capture capacity of 303.20 mg g^-1 during 9 h. It is 900 mg g^-1 in the vapor phase within 24 h. After three cycles, the PANI/LDH@CNT could be regenerated while maintaining 91.90 % iodine adsorption efficiency. Due to the presence of free amine (-N) groups, OH^-, CO₂H, and π-π conjugated structures in the PANI/LDH@CNT, it is also explored for efficient iodine uptake. It was demonstrated that the pseudo-first-order (PFO) and Langmuir model had the optimum correlation with the kinetic and isotherm data, respectively. Moreover, the use of PANI/LDH@CNT is not only limited to iodine capture; it can also be utilized as a sensitive sensor that displays a fluorescence "turn-off" response for Mn⁷⁺ and Cr⁶⁺ ions and a fluorescence "turn-on" response in the case of Al³⁺ ions. The fluorescence intensity of the PANI/LDH@CNT was turned off in the presence of Mn⁷⁺ and Cr⁶⁺ because of the fluorescence inner filter effect (IFE) mechanism. In contrast, the fluorescence intensity was turned on in the case of Al³⁺, relying on the chelation-enhanced fluorescence (CHEF) effect mechanism. Under optimal conditions, the limit of detection (LOD) of 51, 59, and 81 nM for Mn⁷⁺, Cr^6+, and Al³⁺, respectively. According to the literature, this is probably the first example based on PANI/LDH@CNT as a multifunctional hybrid material employed as an adsorbent for capturing radioactive iodine and as a chemosensor for detecting heavy metal ions in aqueous solutions.

Efficient removal of Cs ion by electrochemical adsorption and desorption reaction using NiFe Prussian blue deposited carbon nanofiber electrode

Prussian blue (PB) analog (NiFe, CoFe, FeFe, and commercial(cPB)) decorated carbon nanofiber (CNF) electrodes were synthesized by the drop casting method in this study to investigate the interaction between PB and CNF for the electrochemical adsorption (EA) and electrochemical desorption (ED) of Cs ion (Cs⁺). The adhesion of PB on the electrode and the EA and ED of Cs⁺ were substantially higher when the CNF electrode was used, compared with the fluorine-doped tin oxide supporting electrode. The use of CNF led to the smooth occurrence of EA and ED of Cs⁺, where the reported efficiency was: NiFe > FeFe > cPB. The EA and ED of Cs⁺ on NiFe decorated CNF (C-NiFe) were strongly affected by the loading amount of NiFe. Although the strongest EA capacity was identified when 1 mg of NiFe was used, it decreased as the loading amount of NiFe increased. Thus, the EA of Cs⁺ occurs under the reduction of NiFe with some Fe(III) reduced to Fe(II) of NiFe, thus inducing more adsorption of Cs⁺. Overall, we confirmed that the C-NiFe electrode with appropriate thickness of NiFe layer is potentially an excellent adsorbent for Cs removal.

An electroactive montmorillonite/polypyrrole ion exchange film: Ultrahigh uptake capacity and ion selectivity for rapid removal of lead ions

Contact with trace heavy metal contaminants will also lead to extremely bad health influence on human body and aquatic life. Although various adsorbents have been synthesized for the recovery of heavy metal ions, most of them shows deficient adsorption capacity, sluggish uptake rate and low selectivity. In this study, a montmorillonite/polypyrrole (MMT/PPy) film was successfully synthesized by intercalating polymers PPy into the interlayer of MMT nanosheets for selective and rapid capture of Pb²⁺. The electroactive film has ultrahigh uptake capacity (1373.29 mg⋅g^-1), which is much higher than most conventional Pb²⁺ adsorbents. Meanwhile, it had an extreme selectivity towards Pb²⁺ due to the MMT/PPy film can accurately identified Pb²⁺. Through characterization testing and data analysis, the selective and rapid uptake/release of Pb²⁺ should be realized through three ways: (1) negatively-charged laminates of MMT can generate electrostatic attraction to Pb²⁺; (2) -OH on the surface of MMT laminates can accurately identified and bonded with Pb²⁺ (M-O-H↔ M-O-Pb); (3) PPy doped by PSS^n- and protic acid can rapidly catch Pb²⁺ (PPy⁺·PSS^n-+Pb²⁺+e^-→ PPy·PSS^n-·Pb²⁺). Therefore, such a novel MMT/PPy nanocomposite film could has evident application prospect to remove Pb²⁺ from various water bodies.

Theoretical calculation assisted materials screening of BiOX (X = F, Cl, Br, I) for electrochemical absorption of cesium ions

The electrochemical switching ion exchange (ESIX) technique has been widely used for the separation and recovery of radioactive cesium ions (Cs⁺) from wastewater. In this study, a series of BiOX (X = F, Cl, Br, I) materials were first evaluated for their absorption properties to Cs⁺ through density functional theory (DFT) calculations. The calculations predict that BiOBr has the best absorption performance among the four materials, BiOF, BiOCl, BiOBr, and BiOI, due to its high absorption energy and low ion migration energy barrier to Cs⁺. Simultaneously, the selectivity calculations revealed that BiOBr also showed the best selectivity for Cs⁺ compared with Li⁺ and Na⁺. Subsequently, four materials were prepared using the hydrothermal synthesis method and their electrochemical absorption performance was tested. The results showed that BiOBr has the highest electroactivity, and its absorption capacity was up to 16 mg Cs⁺/g BiOBr in a solution mixture of 50 ppm Li⁺, Na⁺, and Cs⁺. Based on our theoretical calculations and experiments, our findings provide prospective insights for predicting the electrochemical absorption performance of materials using first-principles calculations.

Remediation of radiocesium-contaminated liquid waste, soil, and ash: a mini review since the Fukushima Daiichi Nuclear Power Plant accident

The radiation contamination after the Fukushima Daiichi Nuclear Power Plant accident attracts considerable concern all over the world. Many countries, areas, and oceans are greatly affected by the emergency situation other than Japan. An effective remediation strategy is in a highly urgent demand. Though plenty of works have been carried out, progressive achievements have not yet been well summarized. Here, we review the recent advances on the remediation of radiocesium-contaminated liquid waste, soil, and ash. The overview of the radiation contamination is firstly given. Afterwards, the current remediation strategies are critically reviewed in terms of the environmental medium. Special attentions are paid on the adsorption/ion exchange and electrically switched ion exchange methods. Finally, the present review outlines the possible works to do for the large-scale application of the novel remediation strategies.