High performance of magnetic BiFeO 3 nanoparticle-mediated photocatalytic ozonation for wastewater decontamination

Efficient treatment of surfactant containing wastewater by photocatalytic ozonation with BiPO4 nanorods

In this study, monoclinic BiPO4 nanorods were fabricated by one-pot solvothermal method. Its catalytic capability in photocatalytic ozonation process was tested by degradation and mineralization of sodium dodecyl benzene sulfonate (SDBS) solution. The results demonstrated that the TOC removal rate was dramatically improved to 90.0% at 75 min for UV/O3/BiPO4 process, which was 4.9 and 3.8 times more than that of UV/BiPO4 and O3. Moreover, the pseudo-first-order kinetic constant (0.337 min-1) and mineralization rate (90.0%) for SDBS degradation using BiPO4 in UV/O3 process were 1.6 and 1.3 times as great as that of conventional TiO2 photocatalyst (0.206 min-1, 67.3%). The influence of BiPO4 dosage, O3 concentration initial pH and coexisted ions on SDBS degradation in UV/O3/BiPO4 process were also investigated. The outcome of quenching studies illustrated both ·OH and h+ contributed prominently to SDBS degradation in UV/O3/BiPO4 process, implying that high valence band position of BiPO4 could promote the synergism between photocatalysis and ozonation. The degradation pathway of SBDS was proposed by combination of intermediates analysis and DFT calculation. Real carwash wastewater was chosen as typical surfactant containing wastewater to explore the practical application of UV/O3/BiPO4 technology. During 30 min, COD and LAS removal efficiency reached 59.7% and 70.6%, respectively. The quality indices of effluent could meet the requirements for reuse of carwash water in Water Quality Standard for Urban Miscellaneous Use in China. Energy consumption in the process was calculated as 13.9 kW h m-3, which was about 3.6 and 2.2 times less than that of UV/BiPO4 and O3 process, respectively. The results suggest that UV/O3/BiPO4 system has an application potential for surfactant containing wastewater treatment or recycle.

MoS2/polyaniline (PANI)/polyacrylonitrile (PAN)@BiFeO3 bilayer hollow nanofiber membrane: Photocatalytic filtration and piezoelectric effect enhancing degradation and disinfection

A novel MoS₂/polyaniline (PANI)/polyacrylonitrile (PAN)@BiFeO₃ bilayer hollow nanofiber membrane (PPBM-H) was successfully synthesized by coaxial electrospinning technique. In the nanofiber, BiFeO₃ nanoparticles (NPs) and MoS₂ nanosheets (NSs) were loaded in the middle and outer layers of the PANI/PAN composites, respectively, which constructs a type II heterojunction with spatially separated microtopography, thus significantly improving the charge separation in photocatalysis. Moreover, the hollow structure and the vast number of exposed groups on the surface of PPBM-H help to improve the mass transfer efficiency and pollutant adsorption performance in wastewater treatment. In addition, PPBM-H can generate H₂O₂ by in-situ activation of BiFeO₃/MoS₂ for photo-Fenton catalysis, enabling Fe³⁺ and Fe²⁺ recycling. Also, PPBM-H can produce piezoelectric polarisation under ultrasonic excitation, which can further enhance the efficiency of electron/hole separation and transfer, and induce the generation of active free radicals. Owing to its wonderful self-cleaning effect, the PPBM-H has good mechanical strength (2.95 Mpa), hydrophilicity (11.6°), water flux (1248 L·m^-2·h^-1), BSA rejection (98.8 %), and exhibits distinguished photocatalytic filtration efficiencies (99.5 % tetracycline hydrochloride (TCH) and 99.9 % methyl orange (MO) within 60 min), piezo-photocatalysis (99.2 % TCH within 2 h), disinfection performance for Escherichia coli (E. coli) (100 %, within 60 min).

Gd3+-substituted BiFeO3 perovskite nanoparticles: facile synthesis, characterization, and applications in heterogeneous catalysis

We present the combustion-based synthesis of BiFeO₃ (BFO) and Gd:BiFeO₃ perovskite nanoparticles. XRD analysis demonstrates that the undoped BFO (x = 0) perovskite sample shows a single perovskite phase with a rhombohedral structure. However, increase in the Gd³⁺ content from x = 0.05 and 0.15 to 0.25 led to the occurrence of a structural phase transformation from rhombohedral (BiFeO₃) to orthorhombic (Bi₂Fe₄O₉). With an increase in the Gd-dopant the average crystallite size of rhombohedral structures increased from 16 to 23 nm. The perovskite samples were examined using XPS, which confirmed the presence of Bi³⁺, Gd³⁺, Fe²⁺, and O²⁺ ions. FT-IR spectroscopy indicated the existence of elemental functional groups in the synthesized perovskite nanoparticles. Furthermore, the direct band gap measured by DRS reduced from 2.16 to 2.0 eV as the Gd concentration increased. The nanoparticles of the BFO perovskite had an uneven shape, a tendency to agglomerate, and fused grains with defined grain boundaries. At ambient temperature, both the undoped and Gd:BFO perovskite nanoparticles exhibit a ferromagnetic characteristic. It was found that the BET surface area of the undoped and Gd-doped BFO perovskite nanoparticles varied progressively from 4.38 to 33.52 m² g^-1. The catalytic oxidation studies conducted in a batch reactor under air conditions revealed that the synthesized catalysts, in particular, Gd:BFO (x = 0.25), exhibited higher conversion and selectivity efficiencies for glycerol (con. 100% and sel. 99.5%, respectively).

Synthesis of cerium oxide embedded perovskite type bismuth ferrite nanocomposites for sonophotocatalysis of aqueous micropollutant ibuprofen

Ibuprofen is potentially toxic and carcinogenic for freshwater ecosystems and poses a serious threat to human health by affecting kidney function. The present study focused on the sunlight-controlled degradation of ibuprofen from water using a novel magnetically separable cerium oxide-embedded bismuth ferrite heterostructure. Catalysts were synthesized by solvothermal and co-precipitation methods and characterized by X-ray diffractometry, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis optical absorption spectroscopy, and nitrogen adsorption. This study investigated the effect of photocatalysis, sonolysis, sonophotolysis, and sonophotocatalysis on the degradation of ibuprofen in water. Pseudo-first-order and second-order kinetics were applied to evaluate the rate of reaction for ibuprofen degradation. The addition of 5% CeO2 to the BiFeO3 significantly increased the surface area and pore volume of bismuth ferrite, which enhanced their photocatalytic degradation efficiency by 2.28 times in terms of ibuprofen mineralization. Sonolysis treatment alone and in combination with photolysis led to the degradation of ibuprofen, but with the formation of intermediate products. Positive synergy was observed when sonolysis was combined with photocatalysis in terms of the mineralization of ibuprofen and the degradation of intermediates along with their parent compound. It was proposed that, compared to photocatalytic mineralization, the ultrasound-assisted advanced oxidation process resulted in the conversion of ibuprofen to its mineralization products.

Complete mineralization of phenolic compounds in visible-light-driven photocatalytic ozonation with single-crystal WO3 nanosheets: Performance and mechanism investigation

Complete mineralization of phenolic compounds into CO₂ and H₂O is desirable for removing them in wastewater, but it is challenging due to the generated recalcitrant intermediates, which requires highly effective advanced oxidation process with proper catalysts. Herein, we found that single-crystal WO₃ nanosheets (NSs)-based photocatalytic ozonation (PCO) can realize complete mineralization of phenols (phenol and 2-chlorophenol) under visible light irradiation. Almost 100% mineralization ratio of phenols was achieved through WO₃ NSs-based PCO system within short time. By comparing their performances with those of polycrystalline WO₃ nanoparticles, detecting and analyzing the intermediates, identifying the dominant radicals and conducting some electrochemical characterizations, the origin of superior catalytic activity of WO₃ NSs was uncovered, the mineralization pathways and the overall mechanism were proposed. The excellent PCO performance of WO₃ NSs was contributed to their nanosheet morphology with single-crystal microstructure and good dispersion, which can provide continuous interior channels for the photogenerated charge transport from the bulk to surface of WO₃ NSs and enough active sites for the surface reactions triggered by these charges. This work puts forwards new ideas to design highly active photocatalysts for PCO and helps deepen understanding of the catalytic mechanism of PCO.

Photodeposition of CoOx nanoparticles on BiFeO3 nanodisk for efficiently piezocatalytic degradation of rhodamine B by utilizing ultrasonic vibration energy

Piezoelectric materials have received much attention due to their great potential in environmental remediation by utilizing vibrational energy. In this paper, a novel piezoelectric catalyst, CoOx nanoparticles anchored BiFeO3 nanodisk composite, was intentionally synthesized via a photodeposition method and applied in piezocatalytic degradation of rhodamine B (RhB) under ultrasonic vibration. The as-synthesized CoOx/BiFeO3 composite presents high piezocatalytic efficiency and stability. The RhB degradation rate is determined to be 1.29 h-1, which is 2.38 folds higher than that of pure BiFeO3. Via optimizing the reaction conditions, the piezocatalytic degradation rate of the CoOx/BiFeO3 can be further increased to 3.20 h-1. A thorough characterization was implemented to investigate the structure, piezoelectric property, and charge separation efficiency of the CoOx/BiFeO3 to reveal the nature behind the high piezocatalytic activity. It is found that the CoOx nanoparticles are tightly adhered and uniformly dispersed on the surface of the BiFeO3 nanodisks. Strong interaction between CoOx and BiFeO3 triggers the formation of a heterojunction structure, which further induces the migration of the piezoinduced holes on the BiFeO3 to CoOx nanoparticles. The recombination of electron-hole pairs is retarded, thereby increasing the piezocatalytic performance greatly. This work may offer a new paradigm for the design of high-efficiency piezoelectric catalysts.

Enhanced Photocatalytic Ozonation of Phenol by Ag/ZnO Nanocomposites

Ag/ZnO nanocomposites were synthesized and applied in the photocatalytic ozonation of phenol. Their crystal, textural, morphological, optical, and electrochemical properties were investigated by XRD, Raman, SEM, TEM, UV–Vis diffuse reflectance spectroscopy (DRS), X-ray photoemission spectroscopy (XPS), and photoluminescence (PL) techniques in detail. The results indicated that silver nanoparticles were well dispersed on the surface of porous ZnO and the intimate contacts were formed at the Ag/ZnO interfaces. This prominently favored the separation and transfer of photoinduced electrons from ZnO to Ag nanoparticles for the activation of ozone to produce •OH and •O2−. As a result, a significant enhancement in photocatalytic ozonation of phenol was achieved over Ag/ZnO catalysts. It also showed a synergistic effect between photocatalysis and ozonation.

Magnetic Nanoparticles for Photocatalytic Ozonation of Organic Pollutants

Magnetic nanoparticles (MNP) composed of iron oxide (or other metal–FeO cores) coated with carbon produced by chemical vapour decomposition (CVD) were used in the photocatalytic ozonation of oxamic acid (OMA) which we selected as a model pollutant. The incorporation of Ag and Cu on FeO enhanced the efficiency of the process. The carbon phase significantly increased the photocatalytic activity towards the conversion of OMA. As for the synthesis process, raising the temperature of CVD improved the performance of the produced photocatalysts. The obtained results suggested that the carbon phase is directly related to high catalytic activity. The most active photocatalyst (C@FeO_CVD850) was used in the removal of other compounds (dyes, industrial pollutants and herbicides) from water and high mineralization levels were attained. This material was also revealed to be stable during reutilisation.

Wide spectral degradation of Norfloxacin by Ag@BiPO4/BiOBr/BiFeO3 nano-assembly: Elucidating the photocatalytic mechanism under different light sources

Metallic Ag deposited BiPO₄/BiOBr/BiFeO₃ ternary nano-hetero-structures were rationally designed and synthesized by a simple precipitation-wet impregnation-photo deposition method. The plasmonic junction possesses an excellent wide spectrum photo-response and makes best use of BiPO₄ which is otherwise a poor photocatalyst. Ag@BiPO₄/BiOBr/BiFeO₃ showed superior photocatalytic activity for degradation of norfloxacin (NFN) under visible, ultra-violet, near-infra-red and natural solar light. Especially catalyst APBF-3 (0.3 wt% Ag@BiPO₄/BiOBr/BiFeO₃) shows 98.1% degradation of NFN (20 mg/L) in 90 min under visible light and 99.1% in less than 45 min under UV exposure. Free radical scavenging experiments and electron spin resonance (ESR) results has been used for explanation of charge transfer, photocatalytic mechanism and role of radicals for binary, ternary and Ag deposited ternary junctions for UV and visible exposure. Metallic Ag in addition to its surface plasmon resonance helps in protection of high conduction band and valence band in the three semiconductors. A dual Z-scheme mechanism has been predicted by comparing with possibilities of double charge and vectorial charge transfer.