Surface decoration of BiOBr with BiPO4 nanoparticles to build heterostructure photocatalysts with enhanced visible-light photocatalytic activity

A review on the progress of the photocatalytic removal of refractory pollutants from water by BiOBr-based nanocomposites

Organic matters from various sources such as the manufacturing, agricultural, and pharmaceuticals industries is continuously discharged into water bodies, leading to increasingly serious water pollution. Photocatalytic technology is a clean and green advanced oxidation process, that can successfully decompose various organic pollutants into small inorganic molecules such as carbon dioxide and water under visible light irradiation. Bismuth oxybromide (BiOBr) is an attractive visible light photocatalyst with good photocatalytic performance, suitable forbidden bandwidth, and a unique layered structure. However, the rapid combination of the electron-hole pairs generated in BiOBr leads to low photocatalytic activity, which limits its photocatalytic performance. Due to its unique electronic structure, BiOBr can be coupled with a variety of different functional materials to improve its photocatalytic performance. In this paper, We present the morphologically controllable BiOBr and its preparation process with the influence of raw materials, additives, solvents, synthesis methods, and synthesis conditions. Based on this, we propose design synthesis considerations for BiOBr-based nanocomplexes in four aspects: structure, morphology and crystalline phase, reduction of electron-hole pair complexation, photocorrosion resistance, and scale-up synthesis. The literature on BiOBr-based nanocomposites in the last 10 years (2012-2022) are summarized into seven categories, and the mechanism of enhanced photocatalytic activity of BiOBr-based nanocomposites is reviewed. Moreover, the applications of BiOBr-based nanocomposites in the fields of degradation of dye wastewater, antibiotic wastewater, pesticide wastewater, and phenol-containing wastewater are reviewed. Finally, the current challenges and prospects of BiOBr-based nanocomposites are briefly described. In general, this paper reviews the construction of BiOBr-based nanocomposites, the mechanism of photocatalytic activity enhancement and its research status and application prospects in the degradation of organic pollutants.

The improvement of photocatalysis O2 production over BiVO4 with amorphous FeOOH shell modification

A novel amorphous FeOOH modified BiVO₄ photocatalyst (A-FeOOH/BiVO₄) was successfully produced and characterized by various techniques. The results showed that amorphous FeOOH with about 2 nm thickness evenly covered on BiVO₄ surface, which caused resultant A-FeOOH/BiVO₄ exhibiting higher visible light photocatalytic performance for producing O₂ from water than BiVO₄. When the covered amount of amorphous FeOOH was 8%, the resultant photocatalyst possessed the best photocatalytic performance. To find the reasons for the improvement of photocatalytic property, electrochemical experiments, DRS, PL and BET, were also measured, the experimental results indicated that interface effect between amorphous FeOOH and BiVO₄ could conduce to migration of photogenerated charge, and exhibit stronger light responded capacity. These positive factors promoted A-FeOOH/BiVO₄ presenting improved the photocatalytic performance. In a word, the combination of amorphous FeOOH with BiVO₄ is an effective strategy to conquer important challenges in photocatalysis field.

Wide spectral degradation of Norfloxacin by Ag@BiPO4/BiOBr/BiFeO3 nano-assembly: Elucidating the photocatalytic mechanism under different light sources

Metallic Ag deposited BiPO₄/BiOBr/BiFeO₃ ternary nano-hetero-structures were rationally designed and synthesized by a simple precipitation-wet impregnation-photo deposition method. The plasmonic junction possesses an excellent wide spectrum photo-response and makes best use of BiPO₄ which is otherwise a poor photocatalyst. Ag@BiPO₄/BiOBr/BiFeO₃ showed superior photocatalytic activity for degradation of norfloxacin (NFN) under visible, ultra-violet, near-infra-red and natural solar light. Especially catalyst APBF-3 (0.3 wt% Ag@BiPO₄/BiOBr/BiFeO₃) shows 98.1% degradation of NFN (20 mg/L) in 90 min under visible light and 99.1% in less than 45 min under UV exposure. Free radical scavenging experiments and electron spin resonance (ESR) results has been used for explanation of charge transfer, photocatalytic mechanism and role of radicals for binary, ternary and Ag deposited ternary junctions for UV and visible exposure. Metallic Ag in addition to its surface plasmon resonance helps in protection of high conduction band and valence band in the three semiconductors. A dual Z-scheme mechanism has been predicted by comparing with possibilities of double charge and vectorial charge transfer.

A Facile Approach for the Synthesis of Zn₂SnO₄/BiOBr Hybrid Nanocomposites with Improved Visible-Light Photocatalytic Performance

In this study, a novel Zn₂SnO₄/BiOBr hybrid photocatalyst was prepared via a mild hydrothermal synthesis combined with a chemical deposition method. The morphological structure, chemical composition, crystal structure, and optical properties were comprehensively characterized by a series of measurement techniques. Morphological observation showed that fine Zn₂SnO₄ nanoparticles were anchored on the nanoplate surface of a flower-like BiOBr 3D hierarchical structure. The experimental results of UV-vis diffuse reflection spectroscopy revealed that the visible-light absorptive capacity of the Zn₂SnO₄/BiOBr hybrid photocatalyst was promoted, as compared to that of pure Zn₂SnO₄. Evidenced by electro-negativity theoretical calculation, Zn₂SnO₄ and BiOBr possessed matched band edges for accelerating photogenerated charge separation at the interface. The Zn₂SnO₄/BiOBr hybrid photocatalyst exhibited enhanced photocatalytic performance in the degradation of Rhodamine B (RhB) under visible light irradiation. According to the band energy structure and the experimental results, the enhanced photocatalytic performance was ascribed to the improved visible-light absorptive capacity and the contact interface between Zn₂SnO₄ nanoparticles and BiOBr nanoplates, being able to favor the prompt charge migration and suppress the recombination of photogenerated carriers in the hybrid system.

Enhanced photocatalytic performance of BiOBr/NH2-MIL-125(Ti) composite for dye degradation under visible light

Metal-organic frameworks (MOFs) are considered as suitable materials for various applications in the area of photocatalysis. On the other hand, 2D BiOBr materials are efficient for the photodegradation of organic dyes under visible light illumination. In this work, BiOBr/NH₂-MIL-125(Ti) composite photocatalysts with different NH₂-MIL-125(Ti) content were prepared by incorporating NH₂-MIL-125(Ti) with BiOBr using a co-precipitation method. A series of characterizations confirmed the strong synergistic effect between BiOBr and NH₂-MIL-125(Ti). In rhodamine B (RhB) degradation experiments, the composite photocatalyst with a mass percent of 7 wt% NH₂-MIL-125(Ti) exhibited an improved photocatalytic activity compared to pristine BiOBr and NH₂-MIL-125(Ti). Furthermore, the enhanced photocatalytic performance under visible light illumination could be attributed to the Ti³⁺-Ti⁴⁺ intervalence electron transfer and synergistic effect between NH₂-MIL-125(Ti) and BiOBr, and also resulted in a separation efficiency of photo-generated electron-hole pairs during the photocatalytic reaction. This study can open up numerous opportunities for the development of various MOF-based visible light photocatalysts when combined with 2D bismuth oxyhalide materials for applications in environmental cleaning.