Immiscible dual ionic liquid-ionic liquid mineral separation of rare-earth minerals

Investigating the Mechanism of Diethylenetriamine Pentamethylene Phosphonic Acid as a Depressant for Calcite Flotation of Fluorite

Fluorite and calcite have been attracting research attention for a long time. This paper reports on an investigation of the use of diethylene triamine pentamethylphosphonic acid (DTPMPA) as a chelating inhibitor. DTPMPA was used as a chelating inhibitor to study the flotation, separation, and adsorption behaviors of fluorite and calcite minerals. The microflotation experiment showed that the maximum separation of fluorite and calcite can be achieved with a DTPMPA dosage of 1.5 × 10-4 mol/L under weakly alkaline conditions (pH = 8). Zeta potential measurement, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used to confirm that DTPMPA was adsorbed on the surface of calcite, inhibiting NaOl adsorption. Additionally, density functional theory calculations showed that oxygen in the DTPMPA phosphate group formed the most stable bidentate binuclear adsorption configuration by chelating with calcium on the calcite surface. Through detection analysis and simulation calculations, the results showed that DTPMPA exhibited significantly weaker adsorption on fluorite compared to that on calcite, highlighting its selective inhibition ability on calcite.

Ultra-Low Viscosity and High Magnetic Susceptibility Magnetic Ionic Liquids Featuring Functionalized Diglycolic Acid Ester Rare-Earth and Transition Metal Chelates

Magnetic ionic liquids (MILs) comprise a subcategory of ionic liquids (ILs) and contain a paramagnetic metal center allowing them to be readily manipulated by an external magnetic field. While MILs are popularly employed as solvents in catalysis, separations, and organic synthesis, most low viscosity combinations possess a hydrophilic character that limits their use in aqueous matrices. To date, no study has reported the synthesis and characterization of hydrophobic MILs with viscosities similar to those of hydrophilic MILs and organic solvents while simultaneously exhibiting enhanced magnetic and thermal properties. In this study, diglycolic acid esters are employed as ligands to chelate with paramagnetic metals to produce cations that are paired with metal chelates composed of hexafluoroacetylacetonate ligands to form MILs incorporating multiple metal centers in the cation and anion. Viscosity values below 31.6 cP were obtained for these solvents, the lowest ever reported for hydrophobic MILs. Solubilities in nonpolar solvents such as benzene were observed to be as high as 50% (w/v) MIL-to-solvent ratio while being insoluble in water at concentrations as low as 0.01% (w/v). Effective paramagnetic moment values for these solvents ranged from 5.33 to 15.56 Bohr magnetons (μB), with mixed metal MILs containing multiple lanthanides in the anion generally offering higher magnetic susceptibilities. MILs composed of ligands containing octyl substituents were found to possess thermal stabilities up to 190 °C. The synthetic strategies explored in this study exploit the highly tunable nature of the employed cation and anion pairs to design versatile ultra-low viscosity magnetoactive solvents that possess tremendous potential and applicability in liquid-liquid separation systems, catalysis, and microfluidics where the mechanical movement of the solvent can be easily facilitated using electromagnets.

Emerging Trends of Computational Chemistry and Molecular Modeling in Froth Flotation: A Review

Froth flotation is the most versatile process in mineral beneficiation, extensively used to concentrate a wide range of minerals. This process comprises mixtures of more or less liberated minerals, water, air, and various chemical reagents, involving a series of intermingled multiphase physical and chemical phenomena in the aqueous environment. Today's main challenge facing the froth flotation process is to gain atomic-level insights into the properties of its inherent phenomena governing the process performance. While it is often challenging to determine these phenomena via trial-and-error experimentations, molecular modeling approaches not only elicit a deeper understanding of froth flotation but can also assist experimental studies in saving time and budget. Thanks to the rapid development of computer science and advances in high-performance computing (HPC) infrastructures, theoretical/computational chemistry has now matured enough to successfully and gainfully apply to tackle the challenges of complex systems. In mineral processing, however, advanced applications of computational chemistry are increasingly gaining ground and demonstrating merit in addressing these challenges. Accordingly, this contribution aims to encourage mineral scientists, especially those interested in rational reagent design, to become familiarized with the necessary concepts of molecular modeling and to apply similar strategies when studying and tailoring properties at the molecular level. This review also strives to deliver the state-of-the-art integration and application of molecular modeling in froth flotation studies to assist either active researchers in this field to disclose new directions for future research or newcomers to the field to initiate innovative works.

Ionic Liquids as Promisingly Multi-Functional Participants for Electrocatalyst of Water Splitting: A Review

Ionic liquids (ILs), as one of the most concerned functional materials in recent decades, have opened up active perspectives for electrocatalysis. In catalyst preparation, ILs act as characteristic active components besides media and templates. Compared with catalysts obtained using ordinary reagents, IL-derived catalysts have a special structure and catalytic performance due to the influence of IL’s special physicochemical properties and structures. This review mainly describes the use of ILs as modifiers and reaction reagents to prepare electrocatalysts for water splitting. The designability of ILs provides opportunities for the ingenious composition of cations or anions. ILs containing heteroatoms (N, O, S, P, etc.) and transition metal anion (FeCl4−, NiCl3−, etc.) can be used to directly prepare metal phosphides, sulfides, carbides and nitrides, and so forth. The special physicochemical properties and supramolecular structures of ILs can provide growth conditions for catalysts that are different from the normal media environment, inducing special structure and high performance. ILs as heteroatom sources are safe, green and easy to operate compared with traditional heteroatom sources. The strategy for using ILs as reagents is expected to realize 100% atomic transformation of reactants, in line with the concept of green chemistry. This review reflects the discovered work with the best findings from the literature. It will offer readers a deeper understanding on the development of IL-derived electrocatalysts and inspire them to ingeniously design high-performance electrocatalysts for water splitting.

Surface nanobubbles on the rare earth fluorcarbonate mineral synchysite

Surface nanobubbles have been identified to play an important role in a range of industries from mineral processing to food science. The formation of surface nanobubbles is of importance for mineral processing in the extraction of complex ores, such as those containing rare earth elements. This is due to the way minerals are extracted utilising froth flotation. In this study, surface nanobubbles were imaged using non-contact atomic force microscopy on a polished cross section containing rare earth minerals. Nanobubbles were found on synchysite under reagent conditions expected to induce hydrophobicity in rare earth minerals, which is required for efficient processing. Synchysite -(Ce) is a rare earth fluorcarbonate mineral containing over 30% rare earth elements. Relatively little research has been conducted on synchysite, with only a few papers on its surface behaviour and flotation. The resulting nanobubbles were analysed and showed an average contact angle of 24° ± 8. These are in line with contact angles found on dolomite and galena by previous studies.

An ionic liquid functionalized polymer for simultaneous removal of four phenolic pollutants in real environmental samples

An ionic liquid functionalized polymer (IL-P) was prepared feasibly and simply by grafting1-butyl-3-vinylimidazolium bromide onto the silica surface. The IL-P was fully characterized, and the results showed that IL-P has a rough surface with a lower specific surface area (205.49 m² g^-1), and the involvement of ionic liquid significantly improved the adsorption performance of IL-P. The pH, initial concentration, adsorption time and temperature were investigated to discuss the adsorption behaviors of IL-P in aqueous solution. The adsorption process of 2,4-dichlorophenol (2,4-DCP), bisphenol A (BPA) and 2,4-dinitrophenol (2,4-DNP) onto IL-P better fitted the pseudo-second-order model, while that of 2-isonaphthol (2-NP) followed the pseudo-first-order model. The adsorption behaviors of IL-P towards 2,4-DCP and 2,4-DNP fitted well with Liu isotherm model, and that of BPA and 2-NP can be described by Langmuir model. The maximum adsorption capacities of 2,4-DCP, BPA, 2,4-DNP and 2-NP bound on IL-P was 239.7, 68.39, 56.86 and 64.28 mg g^-1, respectively, and the adsorption of IL-P is a spontaneous physical process. Comparing with other adsorbent, the as-prepared IL-P showed excellent recognition ability towards the phenolic compounds and can be applied to adsorb and remove trace 2,4-DCP, 2-NP, 2,4-DNP and BPA simultaneously in complicated wastewater and soil samples.