1
|
Zhang S, Wen J, Li H, Chen M. Iron modified hydrogen-bonded organic framework as fluorescent sensor for ascorbic acid detection. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2024; 317:124393. [PMID: 38723463 DOI: 10.1016/j.saa.2024.124393] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/01/2023] [Revised: 04/25/2024] [Accepted: 04/30/2024] [Indexed: 05/31/2024]
Abstract
Herein, iron modified hydrogen-bonded organic framework (Fe-HOF) was successfully prepared by introducing the yellow-green fluorescent ligand 2,5-dihydroxyterephthalic acid into HOF and then modifying Fe3+. A simple turn-on fluorescence strategy is proposed for the detection of ascorbic acid (AA) based on Fe-HOF. Fe3+ could effectively quench fluorescence emission of HOF. In the presence of AA, Fe3+ was reduced to Fe2+, which led to the fluorescence recovery of HOF, thus realizing the fluorescence quantitative detection of AA. These fluorescence responsive behaviors of Fe-HOF ensure fluorescence assay of AA within 0.5 - 8 μM, along with a limit of detection (LOD) of 0.14 μM. The sensing platform could realize the rapid detection of ascorbic acid in vitamin C pills, tablets and beverages in the detection of ascorbic acid with good recoveries.
Collapse
Affiliation(s)
- Shangqing Zhang
- Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang, 110819, China.
| | - Jie Wen
- Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang, 110819, China
| | - Haiyan Li
- Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang, 110819, China
| | - Mingli Chen
- Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang, 110819, China; Analytical and Testing Center, Northeastern University, Box 106, Shenyang, 110819, China
| |
Collapse
|
2
|
Katare A, Sikha S, Mandal B. Synergistic enhancement of CO 2/N 2 separation performance via Ce-MOF-infused chitosan mixed matrix membrane. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2024:10.1007/s11356-024-33061-y. [PMID: 38561537 DOI: 10.1007/s11356-024-33061-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/06/2024] [Accepted: 03/20/2024] [Indexed: 04/04/2024]
Abstract
Reticular chemistry, exemplified by metal-organic frameworks (MOFs), has proven invaluable in creating porous materials with finely tuned structures to address critical global energy and environmental challenges. In this context, the need for efficient carbon dioxide (CO2) capture and utilization has taken center stage. One promising approach involves the integration of MOFs into polymer matrix to develop mixed matrix membranes (MMMs). In this work, cerium-based MOFs (Ce-MOF) were selected due to their robust CO2 capture capabilities, while chitosan (CS) was chosen as the polymer matrix due to its reasonably good selectivity and balanced CO2 permeance for the development of MMMs for CO2/N2 (20/80 vol%) separation. A comprehensive suite of analytical techniques, including FTIR, XRD, FESEM, XPS, TGA, EDX, FETEM, and BET, was applied for precise characterization of both the MOF and MMMs. Various operational parameters, such as Ce-MOF content and temperature, were systematically explored to investigate the CO2 capture efficiency of the synthesized MMMs. The results revealed that the optimized Ce-MOF-embedded CS MMMs consistently outperformed the bare CS membranes.
Collapse
Affiliation(s)
- Aviti Katare
- Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, 781039, Assam, India
| | - Sikha Sikha
- Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, 781039, Assam, India
| | - Bishnupada Mandal
- Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, 781039, Assam, India.
| |
Collapse
|
3
|
Rehman A, Jahan Z, Khan Niazi MB, Noor T, Javed F, Othman SI, Abukhadra MR, Nawaz A. Graphene-grafted bimetallic MOF membranes for hazardous & toxic contaminants treatment. CHEMOSPHERE 2023; 340:139721. [PMID: 37541443 DOI: 10.1016/j.chemosphere.2023.139721] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/18/2023] [Revised: 07/19/2023] [Accepted: 08/01/2023] [Indexed: 08/06/2023]
Abstract
Development of membrane with improved carbon dioxide (CO2) gas separation capability is a significant challenge. However, the fabrication of membrane that efficiently separate and purification CO2-containing gases has been the focus of global attention. Cellulose Acetate (CA) has robust reinforcing characteristics when incorporated within a suitable polymer matrix. This work focus on the synthesis of novel mixed matrix membranes (MMMs) by introducing Graphene-grafted bimetallic MOFs in Cellulose Acetate polymer. The graphene-grafted bimetallic MOF (GG-BM MOFs) was prepared by a hydrothermal technique. Whereas, the solution casting approach used to fabricate membranes. The 1-5 wt% of GG-BM MOFs incorporated into the CA matrix. The mechanical, hydrophilicity and adsorption characteristics of fabricated MMMs were investigated. The crystallinity of MMM enhanced after the addition of GG-BM MOFs. In addition, the mechanical characteristics of MMMs were improved with the incorporation of GG-BM MOFs inside the polymer matrix. Maximum stress and strain was obtained for 2 wt% MMM (36.4 N/mm2 and 11% respectively). The CO2 adsorption performance was evaluated at 10 bar and 45 °C. The FTIR results represent insignificant bond shifting with the addition GG-BM MOFs at these conditions. The overall results showed that MMMs containing 2 wt% GG-BM MOFs have good adsorption properties for CO2 i.e 3.15 wt% of CO2. The MMMs have shown a decrease in the mechanical properties and CO2 adsorption at the higher GG-BM MOFs loading due to the presence of agglomeration which was confirmed through SEM. Thus, the addition of GG-BM MOFs in the CA matrix positively altered the physicochemical characteristics of the resulting MMMs, which could assist them in achieving remarkable CO2 adsorption at 2 wt%.
Collapse
Affiliation(s)
- Ayesha Rehman
- Department of Chemical Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, Islamabad, 44000, Pakistan
| | - Zaib Jahan
- Department of Chemical Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, Islamabad, 44000, Pakistan.
| | - Muhammad Bilal Khan Niazi
- Department of Chemical Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, Islamabad, 44000, Pakistan
| | - Tayyaba Noor
- Department of Chemical Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, Islamabad, 44000, Pakistan
| | - Farhan Javed
- Department of Materials Engineering, School of Chemical and Materials Engineering, National University of Sciences and Technology, Islamabad, 44000, Pakistan
| | - Sarah I Othman
- Department of Biology, College of Science, Princess Nourah Bint Abdulrahman University, P.O. BOX 84428, Riyadh, 11671, Saudi Arabia
| | - Mostafa R Abukhadra
- Materials Technologies and Their Applications Lab, Geology Department, Faculty of Science, Beni-Suef University, Beni-Suef City, 65211, Egypt
| | - Alam Nawaz
- School of Chemical Engineering, Yeungnam University, Gyeongsan, 712-749, Republic of Korea.
| |
Collapse
|
4
|
Bucura F, Spiridon SI, Ionete RE, Marin F, Zaharioiu AM, Armeanu A, Badea SL, Botoran OR, Ionete EI, Niculescu VC, Constantinescu M. Selectivity of MOFs and Silica Nanoparticles in CO 2 Capture from Flue Gases. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:2637. [PMID: 37836278 PMCID: PMC10574321 DOI: 10.3390/nano13192637] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 09/21/2023] [Accepted: 09/23/2023] [Indexed: 10/15/2023]
Abstract
Until reaching climate neutrality by attaining the EU 2050 level, the current levels of CO2 must be mitigated through the research and development of resilient technologies. This research explored potential approaches to lower CO2 emissions resulting from combustion fossil fuels in power plant furnaces. Different nanomaterials (MOFs versus silica nanoparticles) were used in this context to compare their effectiveness to mitigate GHG emissions. Porous materials known as metal-organic frameworks (MOFs) are frequently employed in sustainable CO2 management for selective adsorption and separation. Understanding the underlying mechanism is difficult due to their textural characteristics, the presence of functional groups and the variation in technological parameters (temperature and pressure) during CO2-selective adsorption. A silica-based nanomaterial was also employed in comparison. To systematically map CO2 adsorption as a function of the textural and compositional features of the nanomaterials and the process parameters set to a column-reactor system (CRS), 160 data points were collected for the current investigation. Different scenarios, as a function of P (bar) or as a function of T (K), were designed based on assumptions, 1 and 5 vs. 1-10 (bar) and 313.15 and 373.15 vs. 313.15-423.15 (K), where the regression analyses through Pearson coefficients of 0.92-0.95, coefficients of determination of 0.87-0.90 and p-values < 0.05, on predictive and on-site laboratory data, confirmed the performances of the CRS.
Collapse
Affiliation(s)
| | | | | | | | | | | | | | | | | | - Violeta-Carolina Niculescu
- National Research and Development Institute for Cryogenic and Isotopic Technologies—ICSI Ramnicu Valcea, 4 Uzinei Street, P.O. Box Raureni 7, 240050 Ramnicu Valcea, Romania
| | - Marius Constantinescu
- National Research and Development Institute for Cryogenic and Isotopic Technologies—ICSI Ramnicu Valcea, 4 Uzinei Street, P.O. Box Raureni 7, 240050 Ramnicu Valcea, Romania
| |
Collapse
|
5
|
Mannias G, Scano A, Pilloni M, Magner E, Ennas G. Tailoring MOFs to Biomedical Applications: A Chimera or a Concrete Reality? The Case Study of Fe-BTC by bio-friendly Mechanosynthesis. COMMENT INORG CHEM 2022. [DOI: 10.1080/02603594.2022.2153837] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Affiliation(s)
- Giada Mannias
- Department of Chemical and Geological Sciences, University of Cagliari and INSTM unit, Monserrato, Italy
- Department of Chemical Sciences and Bernal Institute, University of Limerick, Limerick, Ireland
| | - Alessandra Scano
- Department of Chemical and Geological Sciences, University of Cagliari and INSTM unit, Monserrato, Italy
| | - Martina Pilloni
- Department of Chemical and Geological Sciences, University of Cagliari and INSTM unit, Monserrato, Italy
| | - Edmond Magner
- Department of Chemical Sciences and Bernal Institute, University of Limerick, Limerick, Ireland
| | - Guido Ennas
- Department of Chemical and Geological Sciences, University of Cagliari and INSTM unit, Monserrato, Italy
| |
Collapse
|
6
|
Magnetite nanoparticles into Fe-BTC MOF as adsorbent material for the remediation of metal (Cu(II), Pb(II, As(III) and Hg(II)) ions-contaminated water. Catal Today 2022. [DOI: 10.1016/j.cattod.2021.11.007] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
|
7
|
Nabais AR, Ahmed S, Younis M, Zhou JX, Pereira JR, Freitas F, Mecerreyes D, Crespo JG, Huang MH, Neves LA, Tomé LC. Mixed matrix membranes based on ionic liquids and porous organic polymers for selective CO2 separation. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2022.120841] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
8
|
Goh SH, Lau HS, Yong WF. Metal-Organic Frameworks (MOFs)-Based Mixed Matrix Membranes (MMMs) for Gas Separation: A Review on Advanced Materials in Harsh Environmental Applications. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2107536. [PMID: 35224843 DOI: 10.1002/smll.202107536] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/04/2021] [Revised: 01/27/2022] [Indexed: 06/14/2023]
Abstract
The booming of global environmental awareness has driven the scientific community to search for alternative sustainable approaches. This is accentuated in the 13th sustainable development goal (SDG13), climate action, where urgent efforts are salient in combating the drastic effects of climate change. Membrane separation is one of the indispensable gas purification technologies that effectively reduces the carbon footprint and is energy-efficient for large-scale integration. Metal-organic frameworks (MOFs) are recognized as promising fillers embedded in mixed matrix membranes (MMMs) to enhance gas separation performance. Tremendous research studies on MOFs-based MMMs have been conducted. Herein, this review offers a critical summary of the MOFs-based MMMs developed in the past 3 years. The basic models to estimate gas transport, preparation methods, and challenges in developing MMMs are discussed. Subsequently, the application and separation performance of a variety of MOFs-based MMMs including those of advanced MOFs materials are summarized. To accommodate industrial needs and resolve commercialization hurdles, the latest exploration of MOF materials for a harsh operating condition is emphasized. Along with the contemplation on the outlook, future perspective, and opportunities of MMMs, it is anticipated that this review will serve as a stepping stone for the coming MMMs research on sustainable and benign environmental application.
Collapse
Affiliation(s)
- Shu Hua Goh
- School of Energy and Chemical Engineering, Xiamen University Malaysia, Selangor Darul Ehsan, 43900, Malaysia
| | - Hui Shen Lau
- School of Energy and Chemical Engineering, Xiamen University Malaysia, Selangor Darul Ehsan, 43900, Malaysia
| | - Wai Fen Yong
- School of Energy and Chemical Engineering, Xiamen University Malaysia, Selangor Darul Ehsan, 43900, Malaysia
- College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, Fujian, 361005, China
| |
Collapse
|
9
|
Effect of carbonic anhydrase on CO2 absorption promoted by choline hydroxide using supported liquid membranes. Sep Purif Technol 2022. [DOI: 10.1016/j.seppur.2021.119921] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
10
|
Ferreira IC, Ferreira TJ, Barbosa AD, de Castro B, Ribeiro RP, Mota JP, Alves VD, Cunha-Silva L, Esteves IA, Neves LA. Cr-based MOF/IL composites as fillers in mixed matrix membranes for CO2 separation. Sep Purif Technol 2021. [DOI: 10.1016/j.seppur.2021.119303] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
11
|
Adsorption of Carbon Dioxide, Methane, and Nitrogen on Zn(dcpa) Metal-Organic Framework. ENERGIES 2021. [DOI: 10.3390/en14185598] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/14/2023]
Abstract
Adsorption-based processes using metal-organic frameworks (MOFs) are a promising option for carbon dioxide (CO2) capture from flue gases and biogas upgrading to biomethane. Here, the adsorption of CO2, methane (CH4), and nitrogen (N2) on Zn(dcpa) MOF (dcpa (2,6-dichlorophenylacetate)) is reported. The characterization of the MOF by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), and N2 physisorption at 77 K shows that it is stable up to 650 K, and confirms previous observations suggesting framework flexibility upon exposure to guest molecules. The adsorption equilibrium isotherms of the pure components (CO2, CH4, and N2), measured at 273–323 K, and up to 35 bar, are Langmuirian, except for that of CO2 at 273 K, which exhibits a stepwise shape with hysteresis. The latter is accurately interpreted in terms of the osmotic thermodynamic theory, with further refinement by assuming that the free energy difference between the two metastable structures of Zn(dcpa) is a normally distributed variable due to the existence of different crystal sizes and defects in a real sample. The ideal selectivities of the equimolar mixtures of CO2/N2 and CO2/CH4 at 1 bar and 303 K are 12.8 and 2.9, respectively, which are large enough for Zn(dcpa) to be usable in pressure swing adsorption.
Collapse
|
12
|
Johari NA, Yusof N, Lau WJ, Abdullah N, Salleh WNW, Jaafar J, Aziz F, Ismail AF. Polyethersulfone ultrafiltration membrane incorporated with ferric-based metal-organic framework for textile wastewater treatment. Sep Purif Technol 2021. [DOI: 10.1016/j.seppur.2021.118819] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
13
|
Ahmad M, Sarfraz M, Ba‐Shammakh M, Naseer K, Ahmed MA. Optimizing membrane synthesis parameters via Taguchi method: An approach to prepare high performance mixed‐matrix membranes for carbon capture applications. CAN J CHEM ENG 2021. [DOI: 10.1002/cjce.24052] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Affiliation(s)
- Muhammad Ahmad
- Department of Polymer and Process Engineering University of Engineering and Technology Lahore Pakistan
| | - Muhammad Sarfraz
- Department of Polymer and Process Engineering University of Engineering and Technology Lahore Pakistan
| | - Mohammed Ba‐Shammakh
- Department of Chemical Engineering King Fahd University of Petroleum and Minerals Dhahran Kingdom of Saudi Arabia
| | - Kashaf Naseer
- Department of Polymer and Process Engineering University of Engineering and Technology Lahore Pakistan
| | - Mirza A. Ahmed
- Department of Polymer and Process Engineering University of Engineering and Technology Lahore Pakistan
| |
Collapse
|
14
|
Ferreira TJ, Vera AT, de Moura BA, Esteves LM, Tariq M, Esperança JMSS, Esteves IAAC. Paramagnetic Ionic Liquid/Metal Organic Framework Composites for CO 2/CH 4 and CO 2/N 2 Separations. Front Chem 2020; 8:590191. [PMID: 33304882 PMCID: PMC7701274 DOI: 10.3389/fchem.2020.590191] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2020] [Accepted: 10/20/2020] [Indexed: 12/05/2022] Open
Abstract
Global warming is arguably the biggest scientific challenge of the twenty-first century and its environmental consequences are already noticeable. To mitigate the emissions of greenhouse gases, particularly of CO2, there is an urgent need to design materials with improved adsorbent properties. Five different magnetic ionic liquids were impregnated into the metal–organic framework ZIF-8. The composites were produced by a direct-contact method, and their performance as sorbents for gas separation applications was studied. The impact of the ionic liquid anion on the sorption capacity and ideal CO2/CH4 and CO2/N2 selectivities were studied, focusing on understanding the influence of metal atom and ligand on the adsorbent properties. Reproducible methodology, along with rigorous characterization, were established to assess the impact of the ionic liquid on the performance of the composite materials. Results show that the ionic liquid was well-impregnated, and the ZIF-8 structure was maintained after ionic liquid impregnation. The produced composites were of microporous nature and were thermally stable. CO2, CH4, and N2 adsorption–desorption isotherms were obtained at 303 K and between 0 and 16 bar. The adsorption-desorption data of the composites were compared with that obtained for original ZIF-8. The general trend in composites is that the increased gas uptake per available pore volume compensates the pore volume loss. Adsorption data per unit mass showed that composites have reversible sorption, but inferior gas uptake at all pressure ranges. This is due to the observed total pore volume loss by the ionic liquid pore occupation/blockage. In most cases, composites showed superior selectivity performance at all pressure range. In particular, the composite [C4MIM]2[MnCl4]@ZIF-8 shows a different low-pressure selectivity trend from the original MOF, with a 33% increase in the CO2/N2 selectivity at 1 bar and 19% increase in the CO2/CH4 selectivity at 10 bar. This material shows potential for use in a post-combustion CO2 capture application that can contribute to greenhouse gas mitigation.
Collapse
Affiliation(s)
- Tiago J Ferreira
- Laboratório Associado para a Química Verde/Rede de Química e Tecnologia (LAQV/REQUIMTE), Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa (FCT NOVA), Costa da Caparica, Portugal
| | - Ana T Vera
- Laboratório Associado para a Química Verde/Rede de Química e Tecnologia (LAQV/REQUIMTE), Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa (FCT NOVA), Costa da Caparica, Portugal
| | - Beatriz A de Moura
- Laboratório Associado para a Química Verde/Rede de Química e Tecnologia (LAQV/REQUIMTE), Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa (FCT NOVA), Costa da Caparica, Portugal
| | - Laura M Esteves
- Laboratório Associado para a Química Verde/Rede de Química e Tecnologia (LAQV/REQUIMTE), Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa (FCT NOVA), Costa da Caparica, Portugal
| | - Mohammad Tariq
- Laboratório Associado para a Química Verde/Rede de Química e Tecnologia (LAQV/REQUIMTE), Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa (FCT NOVA), Costa da Caparica, Portugal
| | - José M S S Esperança
- Laboratório Associado para a Química Verde/Rede de Química e Tecnologia (LAQV/REQUIMTE), Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa (FCT NOVA), Costa da Caparica, Portugal
| | - Isabel A A C Esteves
- Laboratório Associado para a Química Verde/Rede de Química e Tecnologia (LAQV/REQUIMTE), Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa (FCT NOVA), Costa da Caparica, Portugal
| |
Collapse
|
15
|
Winarta J, Meshram A, Zhu F, Li R, Jafar H, Parmar K, Liu J, Mu B. Metal–organic framework
‐based mixed‐matrix
membranes for gas separation: An overview. JOURNAL OF POLYMER SCIENCE 2020. [DOI: 10.1002/pol.20200122] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Joseph Winarta
- School for Engineering of Matter, Transport, and Energy Arizona State University Tempe Arizona USA
| | - Amogh Meshram
- School for Engineering of Matter, Transport, and Energy Arizona State University Tempe Arizona USA
| | - Feifei Zhu
- State Key Laboratory of Chemical Engineering, School of Chemical Engineering East China University of Science and Technology Shanghai China
| | - Renjie Li
- State Key Laboratory of Chemical Engineering, School of Chemical Engineering East China University of Science and Technology Shanghai China
| | - Hasan Jafar
- School for Engineering of Matter, Transport, and Energy Arizona State University Tempe Arizona USA
| | - Kunj Parmar
- School for Engineering of Matter, Transport, and Energy Arizona State University Tempe Arizona USA
| | - Jichang Liu
- State Key Laboratory of Chemical Engineering, School of Chemical Engineering East China University of Science and Technology Shanghai China
| | - Bin Mu
- School for Engineering of Matter, Transport, and Energy Arizona State University Tempe Arizona USA
| |
Collapse
|
16
|
Muthukumaraswamy Rangaraj V, Wahab MA, Reddy KSK, Kakosimos G, Abdalla O, Favvas EP, Reinalda D, Geuzebroek F, Abdala A, Karanikolos GN. Metal Organic Framework - Based Mixed Matrix Membranes for Carbon Dioxide Separation: Recent Advances and Future Directions. Front Chem 2020; 8:534. [PMID: 32719772 PMCID: PMC7350925 DOI: 10.3389/fchem.2020.00534] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/23/2019] [Accepted: 05/25/2020] [Indexed: 12/13/2022] Open
Abstract
Gas separation and purification using polymeric membranes is a promising technology that constitutes an energy-efficient and eco-friendly process for large scale integration. However, pristine polymeric membranes typically suffer from the trade-off between permeability and selectivity represented by the Robeson's upper bound. Mixed matrix membranes (MMMs) synthesized by the addition of porous nano-fillers into polymer matrices, can enable a simultaneous increase in selectivity and permeability. Among the various porous fillers, metal-organic frameworks (MOFs) are recognized in recent days as a promising filler material for the fabrication of MMMs. In this article, we review representative examples of MMMs prepared by dispersion of MOFs into polymer matrices or by deposition on the surface of polymeric membranes. Addition of MOFs into other continuous phases, such as ionic liquids, are also included. CO2 separation from hydrocarbons, H2, N2, and the like is emphasized. Hybrid fillers based on composites of MOFs with other nanomaterials, e.g., of MOF/GO, MOF/CNTs, and functionalized MOFs, are also presented and discussed. Synergetic effects and the result of interactions between filler/matrix and filler/filler are reviewed, and the impact of filler and matrix types and compositions, filler loading, surface area, porosity, pore sizes, and surface functionalities on tuning permeability are discoursed. Finally, selectivity, thermal, chemical, and mechanical stability of the resulting MMMs are analyzed. The review concludes with a perspective of up-scaling of such systems for CO2 separation, including an overview of the most promising MMM systems.
Collapse
Affiliation(s)
| | - Mohammad A. Wahab
- Chemical Engineering Program, Texas A&M University at Qatar, Doha, Qatar
- School of Chemistry, Physics and Mechanical Engineering, Faculty of Engineering, Queensland University of Technology, Brisbane, QLD, Australia
| | - K. Suresh Kumar Reddy
- Department of Chemical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
| | - George Kakosimos
- Department of Chemical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
| | - Omnya Abdalla
- Chemical Engineering Program, Texas A&M University at Qatar, Doha, Qatar
| | - Evangelos P. Favvas
- Institute of Nanoscience and Nanotechnology, National Centre of Scientific Research “Demokritos”, Attica, Greece
| | - Donald Reinalda
- Department of Chemical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
- Center for Catalysis and Separations (CeCaS), Khalifa University, Abu Dhabi, United Arab Emirates
| | - Frank Geuzebroek
- ADNOC Gas Processing, Department of Research and Engineering R&D, Abu Dhabi, United Arab Emirates
| | - Ahmed Abdala
- Chemical Engineering Program, Texas A&M University at Qatar, Doha, Qatar
| | - Georgios N. Karanikolos
- Department of Chemical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
- Center for Catalysis and Separations (CeCaS), Khalifa University, Abu Dhabi, United Arab Emirates
- Research and Innovation Center on CO2 and H2 (RICH), Khalifa University, Abu Dhabi, United Arab Emirates
- Center for Membranes and Advanced Water Technology (CMAT), Khalifa University, Abu Dhabi, United Arab Emirates
| |
Collapse
|
17
|
Kárászová M, Zach B, Petrusová Z, Červenka V, Bobák M, Šyc M, Izák P. Post-combustion carbon capture by membrane separation, Review. Sep Purif Technol 2020. [DOI: 10.1016/j.seppur.2019.116448] [Citation(s) in RCA: 57] [Impact Index Per Article: 14.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
18
|
Effects of structural properties of fillers on performances of Matrimid® 5218 mixed matrix membranes. Sep Purif Technol 2020. [DOI: 10.1016/j.seppur.2019.116277] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
19
|
Karimi M, Diaz de Tuesta JL, d. P. Gonçalves CN, Gomes HT, Rodrigues AE, Silva JAC. Compost from Municipal Solid Wastes as a Source of Biochar for CO
2
Capture. Chem Eng Technol 2020. [DOI: 10.1002/ceat.201900108] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Affiliation(s)
- Mohsen Karimi
- University of PortoLaboratory of Separation and Reaction EngineeringLaboratory of Catalysis and Materials (LSRE/LCM), Department of Chemical Engineering, Faculty of Engineering Rua Dr. Roberto Frias, S/N 4099-002 Porto Portugal
- Centro de Investigação de Montanha (CIMO), Instituto Politécnico de Bragança Campus de Santa Apolónia 5300-253 Bragança Portugal
| | - Jose L. Diaz de Tuesta
- University of PortoLaboratory of Separation and Reaction EngineeringLaboratory of Catalysis and Materials (LSRE/LCM), Department of Chemical Engineering, Faculty of Engineering Rua Dr. Roberto Frias, S/N 4099-002 Porto Portugal
- Centro de Investigação de Montanha (CIMO), Instituto Politécnico de Bragança Campus de Santa Apolónia 5300-253 Bragança Portugal
| | - Carmem N. d. P. Gonçalves
- Centro de Investigação de Montanha (CIMO), Instituto Politécnico de Bragança Campus de Santa Apolónia 5300-253 Bragança Portugal
| | - Helder T. Gomes
- University of PortoLaboratory of Separation and Reaction EngineeringLaboratory of Catalysis and Materials (LSRE/LCM), Department of Chemical Engineering, Faculty of Engineering Rua Dr. Roberto Frias, S/N 4099-002 Porto Portugal
- Centro de Investigação de Montanha (CIMO), Instituto Politécnico de Bragança Campus de Santa Apolónia 5300-253 Bragança Portugal
| | - Alírio E. Rodrigues
- University of PortoLaboratory of Separation and Reaction EngineeringLaboratory of Catalysis and Materials (LSRE/LCM), Department of Chemical Engineering, Faculty of Engineering Rua Dr. Roberto Frias, S/N 4099-002 Porto Portugal
| | - José A. C. Silva
- University of PortoLaboratory of Separation and Reaction EngineeringLaboratory of Catalysis and Materials (LSRE/LCM), Department of Chemical Engineering, Faculty of Engineering Rua Dr. Roberto Frias, S/N 4099-002 Porto Portugal
- Centro de Investigação de Montanha (CIMO), Instituto Politécnico de Bragança Campus de Santa Apolónia 5300-253 Bragança Portugal
| |
Collapse
|
20
|
Sampaio AM, Nabais AR, Tomé LC, Neves LA. Impact of MOF-5 on Pyrrolidinium-Based Poly(ionic liquid)/Ionic Liquid Membranes for Biogas Upgrading. Ind Eng Chem Res 2019. [DOI: 10.1021/acs.iecr.9b04206] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Affiliation(s)
- Adriana M. Sampaio
- LAQV-REQUIMTE, Chemistry Department, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| | - Ana R. Nabais
- LAQV-REQUIMTE, Chemistry Department, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| | - Liliana C. Tomé
- POLYMAT, University of the Basque Country UPV/EHU, Joxe Mari Korta Center, Avda. Tolosa 72, 20018 Donostia-San Sebastian, Spain
| | - Luísa A. Neves
- LAQV-REQUIMTE, Chemistry Department, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| |
Collapse
|
21
|
Smith GL, Eyley JE, Han X, Zhang X, Li J, Jacques NM, Godfrey HGW, Argent SP, McCormick McPherson LJ, Teat SJ, Cheng Y, Frogley MD, Cinque G, Day SJ, Tang CC, Easun TL, Rudić S, Ramirez-Cuesta AJ, Yang S, Schröder M. Reversible coordinative binding and separation of sulfur dioxide in a robust metal-organic framework with open copper sites. NATURE MATERIALS 2019; 18:1358-1365. [PMID: 31611671 DOI: 10.1038/s41563-019-0495-0] [Citation(s) in RCA: 114] [Impact Index Per Article: 22.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/07/2018] [Accepted: 08/29/2019] [Indexed: 06/10/2023]
Abstract
Emissions of SO2 from flue gas and marine transport have detrimental impacts on the environment and human health, but SO2 is also an important industrial feedstock if it can be recovered, stored and transported efficiently. Here we report the exceptional adsorption and separation of SO2 in a porous material, [Cu2(L)] (H4L = 4',4‴-(pyridine-3,5-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid)), MFM-170. MFM-170 exhibits fully reversible SO2 uptake of 17.5 mmol g-1 at 298 K and 1.0 bar, and the SO2 binding domains for trapped molecules within MFM-170 have been determined. We report the reversible coordination of SO2 to open Cu(II) sites, which contributes to excellent adsorption thermodynamics and selectivities for SO2 binding and facile regeneration of MFM-170 after desorption. MFM-170 is stable to water, acid and base and shows great promise for the dynamic separation of SO2 from simulated flue gas mixtures, as confirmed by breakthrough experiments.
Collapse
Affiliation(s)
- Gemma L Smith
- School of Chemistry, University of Manchester, Manchester, UK
| | | | - Xue Han
- School of Chemistry, University of Manchester, Manchester, UK
| | - Xinran Zhang
- School of Chemistry, University of Manchester, Manchester, UK
| | - Jiangnan Li
- School of Chemistry, University of Manchester, Manchester, UK
| | | | | | | | | | - Simon J Teat
- Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA, USA
| | | | - Mark D Frogley
- Diamond Light Source, Harwell Science Campus, Didcot, UK
| | | | - Sarah J Day
- Diamond Light Source, Harwell Science Campus, Didcot, UK
| | - Chiu C Tang
- Diamond Light Source, Harwell Science Campus, Didcot, UK
| | | | - Svemir Rudić
- ISIS, STFC Rutherford Appleton Laboratory, Chilton, UK
| | | | - Sihai Yang
- School of Chemistry, University of Manchester, Manchester, UK.
| | - Martin Schröder
- School of Chemistry, University of Manchester, Manchester, UK.
| |
Collapse
|
22
|
Sosa JE, Ribeiro RPPL, Castro PJ, Mota JPB, Araújo JMM, Pereiro AB. Absorption of Fluorinated Greenhouse Gases Using Fluorinated Ionic Liquids. Ind Eng Chem Res 2019. [DOI: 10.1021/acs.iecr.9b04648] [Citation(s) in RCA: 36] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Affiliation(s)
- Julio E. Sosa
- LAQV, REQUIMTE, Department of Chemistry, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| | - Rui P. P. L. Ribeiro
- LAQV, REQUIMTE, Department of Chemistry, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| | - Paulo J. Castro
- LAQV, REQUIMTE, Department of Chemistry, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| | - José P. B. Mota
- LAQV, REQUIMTE, Department of Chemistry, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| | - João M. M. Araújo
- LAQV, REQUIMTE, Department of Chemistry, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| | - Ana B. Pereiro
- LAQV, REQUIMTE, Department of Chemistry, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica, Portugal
| |
Collapse
|
23
|
Nabais AR, Martins AP, Alves VD, Crespo JG, Marrucho IM, Tomé LC, Neves LA. Poly(ionic liquid)-based engineered mixed matrix membranes for CO2/H2 separation. Sep Purif Technol 2019. [DOI: 10.1016/j.seppur.2019.04.018] [Citation(s) in RCA: 35] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
24
|
Ahmadi M, Janakiram S, Dai Z, Ansaloni L, Deng L. Performance of Mixed Matrix Membranes Containing Porous Two-Dimensional (2D) and Three-Dimensional (3D) Fillers for CO₂ Separation: A Review. MEMBRANES 2018; 8:membranes8030050. [PMID: 30060592 PMCID: PMC6161244 DOI: 10.3390/membranes8030050] [Citation(s) in RCA: 42] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/26/2018] [Revised: 07/20/2018] [Accepted: 07/22/2018] [Indexed: 11/29/2022]
Abstract
Application of conventional polymeric membranes in CO2 separation processes are limited by the existing trade-off between permeability and selectivity represented by the renowned upper bound. Addition of porous nanofillers in polymeric membranes is a promising approach to transcend the upper bound, owing to their superior separation capabilities. Porous nanofillers entice increased attention over nonporous counterparts due to their inherent CO2 uptake capacities and secondary transport pathways when added to polymer matrices. Infinite possibilities of tuning the porous architecture of these nanofillers also facilitate simultaneous enhancement of permeability, selectivity and stability features of the membrane conveniently heading in the direction towards industrial realization. This review focuses on presenting a complete synopsis of inherent capacities of several porous nanofillers, like metal organic frameworks (MOFs), Zeolites, and porous organic frameworks (POFs) and the effects on their addition to polymeric membranes. Gas permeation performances of select hybrids with these three-dimensional (3D) fillers and porous nanosheets have been summarized and discussed with respect to each type. Consequently, the benefits and shortcomings of each class of materials have been outlined and future research directions concerning the hybrids with 3D fillers have been suggested.
Collapse
Affiliation(s)
- Mahdi Ahmadi
- Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway.
| | - Saravanan Janakiram
- Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway.
| | - Zhongde Dai
- Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway.
| | - Luca Ansaloni
- Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway.
| | - Liyuan Deng
- Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim, Norway.
| |
Collapse
|