Striping phenomenon during cross-flow microfiltration of oil-in-water emulsions

Impact of Particle Shape and Surface Group on Membrane Fouling

Membrane fouling remains one of the most critical drawbacks in membrane filtration processes. Although the effect of various operating parameters—such as flow velocity, concentration, and foulant size—are well-studied, the impact of particle shape is not well understood. To bridge this gap, this study investigated the effect of polystyrene particle sphericity (sphere, peanut and pear) on external membrane fouling, along with the effect of particle charge (unmodified, carboxylated, and aminated). The results indicate that the non-spherical particles produce higher critical fluxes than the spherical particles (i.e., respectively 24% and 13% higher for peanut and pear), which is caused by the looser packing in the cake due to the varied particle orientations. Although higher crossflow velocities diminished the differences in the critical flux values among the particles of different surface charges, the differences among the particle shapes remained distinct. In dead-end filtration, non-spherical particles also produced lower flux declines. The shear-induced diffusion model predicts all five particle types well. The Derjaguin-Landau-Verwey-Overbeek (DLVO) and extended DLVO (XDLVO) models were used to quantify the interaction energies, and the latter agreed with the relative critical flux trends of all of the PS particles. As for the flux decline trends, both the DLVO and XDLVO results are in good agreement.

Physico-chemical processes

The review scans research articles published in 2018 on physico-chemical processes for water and wastewater treatment. The paper includes eight sections, that is, membrane technology, granular filtration, flotation, adsorption, coagulation/flocculation, capacitive deionization, ion exchange, and oxidation. The membrane technology section further divides into six parts, including microfiltration, ultrafiltration, nanofiltration, reverse osmosis/forward osmosis, and membrane distillation. PRACTITIONER POINTS: Totally 266 articles on water and wastewater treatment have been scanned; The review is sectioned into 8 major parts;  Membrane technology has drawn the widest attention from the research community.

Membrane-based separation for oily wastewater: A practical perspective

The large volumes of oily wastewater generated by various industries, such as oil and gas, food and beverage, and metal processing, need to be de-oiled prior to being discharged into the environment. Compared to conventional technologies such as dissolved air flotation (DAF), coagulation or solvent extraction, membrane filtration can treat oily wastewater of a much broader compositional range and still ensure high oil removals. In the present review, various aspects related to the practical implementation of membranes for the treatment of oily wastewater are summarized. First, sources and composition of oily wastewater, regulations that stipulate the extent of treatment needed before discharge, and the conventional technologies that enable such treatment are appraised. Second, commercially available membranes, membrane modules, operation modes and hybrids are overviewed, and their economics are discussed. Third, challenges associated with membrane filtration are examined, along with means to quantify and mitigate membrane fouling. Finally, perspectives on state-of-the-art techniques to facilitate better monitoring and control of such systems are briefly discussed.