N-doped carbon dots/CdS hybrid photocatalyst that responds to visible/near-infrared light irradiation for enhanced photocatalytic hydrogen production

Boosting photothermal-assisted photocatalytic H2 production over black g-C3N4 nanosheet photocatalyst via incorporation with carbon dots

Although photocatalytic H2 production based on semiconductor materials has a wide potential application, it still facing challenges such as slow reaction kinetics or complex synthesis processes. To meet these challenges, the carbon dots loaded black g-C3N4 (CN-B-CDs) was synthesized by simple calcination method to achieve efficient photothermal-assisted photocatalytic H2 production. Photothermal imaging experiments confirmed the photothermal effect of CN-B and CDs as dual heat sources to increase the temperature of the composite system, thus improving the effective separation of photo-generated charges. In addition, multiple photocatalytic H2 production tests exhibited that CN-B-CDs photocatalysts not only have strong stability but also can accommodate a variety of complex water bodies, which displayed the potential for industrial application. This study combined the photothermal effect and the mechanism by which the CDs promote the charge transfer to design a new photocatalytic H2 production system and provided a new scheme for achieving efficient photothermal-assisted photocatalytic H2 production using carbon-based materials.

Electrostatically induced Furfural-Derived carbon Dots-CdS hybrid for solar Light-Driven hydrogen production

Carbon dots (CDs) exhibit distinctive optical, electronic, and physicochemical properties, rendering them effective cocatalysts to enhance the photocatalytic performance of light-absorbing materials. The interplay between CDs and substrates is pivotal in manipulating photogenerated charge separation, transfer, and redistribution, significantly influencing overall photocatalytic efficiency. This study introduces a novel electrostatic interaction strategy to interface positively charged CdS nanorods (CdS NRs) with negatively charged furfural-derived CDs. The resulting optimized composite (25-CDs@CdS NRs), showcases photocatalytic hydrogen production at a rate of 1076 μmol g-1h-1. Experimental analyses and theoretical simulations offer insights into the structure-activity relationship, underscoring the crucial role of enhanced electrostatic interaction between CDs and CdS NRs in facilitating efficient charge transfer, activating reaction sites, and improving reaction kinetics. This research establishes an adaptable strategy for integrating CDs with metal-based semiconductors, opening new avenues for developing photocatalytic hybrid assemblies.

Excellent Charge Separation of NCQDs/ZnS Nanocomposites for the Promotion of Photocatalytic H2 Evolution

Carbon Quantum dots (CQDs) are widely studied because of their good optical and electronic characteristics and because they can easily generate photocarriers. Nitrogen-doped CQDs (NCQDs) may exhibit improved hydrophilic, optical, and electron-transfer properties, which are conducive to photocatalytic hydrogen evolution. In this paper, NCQD-modified ZnS catalysts were successfully prepared. Under the irradiation of the full spectrum, the H2 evolution rate of the optimal catalyst 0.25 wt % NCQDs/ZnS achieves 5.70 mmol g-1 h-1, which is 11.88, 43.84, and 5.14 times the values of ZnS (0.48 mmol g-1 h-1), NCQDs (0.13 mmol g-1 h-1), and CQDs/ZnS (1.11 mmol g-1 h-1), respectively. Furthermore, it shows good stability, indicating that the modification of NCQDs prevents the photocorrosion and oxidation of ZnS. The enhanced performance is due to NCQD loading, which promotes the separation of photogenerated carriers, optimizes the structures, and increases the specific surface area. This work highlights the fact that NCQD-modified ZnS may afford a new strategy to synthesize ZnS-based photocatalysts with enhanced H2 production performance.

Coordination polymer and layered double hydroxide dual-precursors derived polymetallic phosphides confined in N-doped hierarchical porous carbon nanoflower as a highly efficient bifunctional electrocatalyst for overall water splitting

Controllable construction of proficient electrocatalyst with 3D hierarchical architecture to achieve low cost and high efficient overall water splitting is of great significance to the sustainable development. Hereby, trimetallic phosphides confined in N-doped carbon nanoflowers (CoNiP/CoNiFeP@NCNFs) were fabricated using CoNi coordination polymer nanoflowers/CoNiFe layered double hydroxide (CoNi CPNFs/CoNiFe LDH) as precursors followed by phosphorization. Benefiting from the unique 3D hierarchical porous architecture, preeminent conductivity, high specific surface area, efficient mass/charge transfer and synergic effect of various transition metals, the well-designed CoNiP/CoNiFeP@NCNFs exhibit extraordinary electrocatalytic performance for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media. Particularly, this novel material can work as a bifunctional catalyst in an integrated water-splitting electrolyzer, which only requires a low voltage of 1.55 V to realize the current density of 10 mA cm-2 with admirable durability (at least 28 h). This work certified the foreground of composites assembled by 3D hierarchical porous carbon and polymetallic phosphides for overall water splitting. It also provided a novel proposal for the rational designing and constructing highly active electrocatalysts by using coordination polymer and LDH as dual-precursors.

Structural Transformation of Coassembled Fmoc-Protected Aromatic Amino Acids to Nanoparticles

Materials made of assembled biomolecules such as amino acids have drawn much attention during the past decades. Nevertheless, research on the relationship between the chemical structure of building block molecules, supramolecular interactions, and self-assembled structures is still necessary. Herein, the self-assembly and the coassembly of fluorenylmethoxycarbonyl (Fmoc)-protected aromatic amino acids (tyrosine, tryptophan, and phenylalanine) were studied. The individual self-assembly of Fmoc-Tyr-OH and Fmoc-Phe-OH in water formed nanofibers, while Fmoc-Trp-OH self-assembled into nanoparticles. Moreover, when Fmoc-Tyr-OH or Fmoc-Phe-OH was coassembled with Fmoc-Trp-OH, the nanofibers were transformed into nanoparticles. UV-vis spectroscopy, Fourier transform infrared spectroscopy, and fluorescence spectroscopy were used to investigate the supramolecular interactions leading to the self-assembled architectures. π-π stacking and hydrogen bonding were the main driving forces leading to the self-assembly of Fmoc-Tyr-OH and Fmoc-Phe-OH forming nanofibers. Further, a mechanism involving a two-step coassembly process is proposed based on nucleation and elongation/growth to explain the structural transformation. Fmoc-Trp-OH acted as a fiber inhibitor to alter the molecular interactions in the Fmoc-Tyr-OH or Fmoc-Phe-OH self-assembled structures during the coassembly process, locking the coassembly in the nucleation step and preventing the formation of nanofibers. This structural transformation is useful for extending the application of amino acid self- or coassembled materials in different fields. For example, the amino acids forming nanofibers could be applied for tissue engineering, while they could be exploited as drug nanocarriers when they form nanoparticles.

Engineering of Solar Energy Harvesting Tb3+-Ion-Doped CdS Quantum Dot Glasses for Photodissociation of Hydrogen Sulfide

The photocatalytic properties of CdS quantum dots (Q-dots) and Tb3+-doped CdS Q-dots dispersed in a borosilicate glass matrix were investigated for the photodissociation of hydrogen sulfide (H2S) into hydrogen (H2) gas and elemental sulfur (S). The Q-dot-containing glass samples were fabricated using the conventional melt-quench method and isothermal annealing between 550 and 600 °C for 6 h for controlling the growth of CdS and Tb3+-ion-doped CdS Q-dots. The structure, electronic band gap, and spectroscopic properties of the Q-dots formed in the glass matrix after annealing were analyzed using Raman and UV-visible spectroscopies, X-ray powder diffraction, and transmission electron microscopy. With increasing annealing temperature, the average size range of the Q-dots increased, corresponding to the decrease of electronic band gap from 3.32 to 2.24 eV. For developing the model for photocatalytic energy exchange, the excited state lifetime and photoluminescence emission were investigated by exciting the CdS and Tb3+-doped CdS quantum states with a 450 nm source. The results from the photoluminescence and lifetime demonstrated that the Tb3+-CdS photodissociation energy exchange is more efficient from the excited Q-dot states compared to the CdS Q-dot glasses. Under natural sunlight, the hydrogen production experiment was conducted, and an increase of 26.2% in hydrogen evolution rate was observed from 0.02 wt % Tb3+-doped CdS (3867 μmol/h/0.5 g) heat-treated at 550 °C when compared to CdS Q-dot glass with a similar heat treatment temperature (3064 μmol/h/0.5 g). Furthermore, the photodegradation stability of 0.02 wt % Tb3+-CdS was analyzed by reusing the catalyst glass powders four times with little evidence of degradation.

Carbon-based photocatalysts for hydrogen production: A review

Future energy crises and environmental deterioration may only be avoided by converting solar energy into sustainable, safe, cost-effective, and environmentally friendly technologies such as water splitting. Many researchers and governments throughout the globe have stressed the imperative need for affordable, environmental benign, resistive to corrosion, and earth-abundant nanostructured photocatalysts. This has led scientists to look for a green and cost-effective way to generate energy. As a result, the significance of photo catalyst engineering and reactor design difficulties connected to the performance of the photocatalytic reactions, as well as the examination and analysis of photocatalyst behaviors for adaptable and cost effective H2 production, is emphasized and summarized. The carbon-based materials have an appealing band structure, strong chemical stability, is plentiful on Earth, and is relatively easy to produce, making them suitable for hydrogen production. As example, graphene oxide (GO) with the oxygenated functional groups and graphene and its counterparts, including Graphene quantum dots (GQDs), GO, reduce graphene oxide (rGO), have been demonstrated to be ideal nanocomposite materials due to their superior properties and distribution in matrix and CNTs with excellent electronic transmission efficiency, low cost, stability, and environmental friendly are a great alternative of electron mediators for photocatalytic devices to boost light absorptivity for efficient hydrogen generation but some of them have limited photocatalytic activity due to their low sunlight usage efficiency, therefore the numerous methods, such as doping ions, constructing heterostructure, and functionalizing carbon-based materials, have recently been proven to promote the photocatalytic activity of them. The pore structure of carbon material functions as an acceptor of photogenerated electrons, improved the photocatalyst's specific surface area. Generally low-dimensional carbon materials demonstrated immense promise as highly efficient, low-cost, and environmentally friendly catalysts for hydrogen generation as an energy source. This article reviews the recent research progress on carbon-based materials for hydrogen evolution for the first time. It commences with a quick overview of the present state of affairs and fundamental concepts of hydrogen production in carbon-based nanomaterials for use in this field. We anticipate that this study will inspire readers to expand the use of carbon-based materials in H₂ generation in a more environmentally friendly way.

Carbon dots decorated cadmium sulphide heterojunction-nanospheres for the enhanced visible light driven photocatalytic dye degradation and hydrogen generation

Carbon dots (C-dots) developed from beetroot is used for the rational design of cadmium sulphide based heterojunction photocatalysts (C-dots@CdS) using hydrothermal technique. The crystal structure, phase, morphology and optical characteristics of the synthesised materials are determined using X-ray diffraction (XRD), High resolution transmission electron microscopy (HR-TEM), Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, UV-Visible diffuse reflectance spectroscopy (UV-DRS), photoluminescence spectroscopy (PL spectroscopy), BET adsorption, X-ray photoelectron spectroscopy (XPS) and electrochemical studies. Using C-dots@CdS catalytic system, a superior photocatalytic activity relative to the undecorated CdS is observed. Among the C-dots@CdS samples, the CdS loaded with 6 wt% of C-dots exhibited enhanced hydrogen evolution rate compared with other samples considered for the study. CdS nanospheres modified with C-dots (6 wt%) resulted in the photocatalytic hydrogen evolution rate of 1582 µmolg^-1 against 849 µmolg^-1 evolution rate obtained for CdS nanospheres within 3 h. In spite of being 0D/0D type nano-heteroarchitecture, C-dots@CdS system obtained an apparent quantum yield of 6.37 % for the catalytic dosage of 20 mg under the irradiation of visible light. CdS in the C-dots@CdS system serves as the light harvester while C-dots with discernible edges can maintain the continuous supply of photo-excited charge carriers and hence can reduce the charge-carrier recombination. Further, the photodegradation of crystal violet dye using the optimised dosage of C-dots@CdS-6 exhibited an efficiency of 97.3 % in 120 min of visible light irradiation under neutral conditions. The detailed kinetic study reveals that the mechanism of photodegradation of crystal violet dye using C-dots@CdS system can be described using pseudo-second-order kinetics. The presence of oxygen rich hydrophilic surface functionalities of C-dots, the formation of near-surface heterojunction and the suitable band structure of C-dots@CdS system leading to the optimum charge carrier separation kinetics can be attributed to the enhanced photocatalytic performance. This work offers a promising strategy to develop bio-derived C-dots based heterojunction photocatalyst to address the burgeoning energy and environmental demands.

Complete photocatalytic degradation of tetracycline by carbon doped TiO2 supported with stable metal nitrate hydroxide

Visible light-driven carbon-doped TiO₂ supported with metal nitrate hydroxide (CT-Ni/Co/Cu) nanocomposites were prepared and characterized by various studies. It is fascinating to note that particle size of TiO₂ was substantially reduced from 5 μm to 50 nm after doping of carbon which was confirmed by FESEM. Moreover, the incorporation of stable metal (Cu) nitrate hydroxide further enhanced the visible light absorption up to 800 nm as evident by UV-DRS. The carbon doping and copper nitrate formation are validated by the Ti-O-C and N-O bonds using XPS and FTIR spectra. The photocatalytic activity of as-prepared photocatalyst was tested for the tetracycline degradation (TC, 10 mg/mL) under light irradiation. Significantly, 3 wt% carbon-doped TiO₂ (31CT) with Cu (II) hydroxide nitrate nanocomposite photocatalyst exhibited an excellent photocatalytic activity (97%, within 1 h), and the corresponding reaction rate was around 2 times higher than bare TiO₂. The excellent photocatalytic activity of 31CT-Cu nanocomposite was due to enhanced adsorbent of TC via carbon doping, visible light absorption, improved photo-generated carrier separation and migration by metal nitrate hydroxide as a support. This work may promote the development of a new carbon-doped TiO₂ supported with highly stable metal nitrate hydroxide nanocomposite by facile method and used as an efficient photocatalyst for photodegradation of environmental pollutants.

Carbon dot/inorganic nanomaterial composites

The preparation methods, formation mechanism, properties and applications of carbon dot/inorganic nanohybrid materials are reported.

Preparation of CdS@C Photocatalyst Using Phytoaccumulation Cd Recycled From Contaminated Wastewater

Cadmium is one of the most toxic heavy metal contaminants in soils and water bodies and poses a serious threat to ecosystems and humans. However, cadmium is also an important resource widely used in many industries. The recovery of cadmium in the form of high-value products is considered as an ideal disposal strategy for Cd-contaminated environments. In this work, Pistia stratiotes was used to recycle cadmium from wastewaters through phytoaccumulation and then transformed into carbon-supported cadmium sulfide photocatalyst (CdS@C) through carbonization and hydrothermal reaction. The CdS@C photocatalyst contained a mixture of cubic and hexagonal CdS with lower band gap energy (2.14 eV) and high electron-hole separation efficiency, suggesting an excellent photoresponse ability and photocatalytic efficiency. The impressive stability and photocatalytic performance of CdS@C were demonstrated in efficient photodegradation of organic pollutants. •OH and O₂•- were confirmed as the major active species for organic pollutants degradation during CdS@C photocatalysis. This work provides new insights into addressing Cd contaminated water bodies and upcycling in the form of photocatalyst.

Well-designed three-dimensional hierarchical hollow tubular g-C3N4/ZnIn2S4 nanosheets heterostructure for achieving efficient visible-light photocatalytic hydrogen evolution

Photocatalytic water splitting for hydrogen production is an important strategy to achieve clean energy development. In this report, a novel three-dimensional (3D) hierarchical hollow tubular g-C₃N₄/ZnIn₂S₄ nanosheets (HTCN/ZIS) type-Ⅱ heterojunction photocatalyst was successfully prepared and applied for photocatalytic hydrogen production under visible light irradiation. The experimental results reveal that the optimal proportion of HTCN/ZIS with the remarkable photocatalytic H₂ evolution rate of 20738 μmol h^-1 g^-1 was obtained. The main reasons for the improvement of hydrogen production activity are as follows: (i) this unique tubular hollow structure can effectively enhances the light capturing ability by the multiple light scattering/reflection of incident light in the inner cavity; (ii) the shorten the phase plane transmission distance could reduce the path of charge transfer; (iii) the surface coated a large number of scaly ZnIn₂S₄ nanosheets can provide abundant reactive sites. Combining the various characterization tests, the enhanced spatial segregation of charge carriers could owning to the intimately interfacial contact and well-matched band gaps structure between g-C₃N₄ and ZnIn₂S₄ through the type-II heterojunction. This work provides a new prospect for the construction of a novel 3D hierarchical type-II heterojunction photocatalyst for highly efficient photocatalytic hydrogen production.

Fabrication of S-scheme CdS-g-C3N4-graphene aerogel heterojunction for enhanced visible light driven photocatalysis

Constructing S-scheme heterojunction photocatalysts reveals a greatly improved separation efficiency of photogenerated carriers and enhanced harvesting ability of solar energy in photocatalytic field. Herein, a ternary CdS-g-C₃N₄-GA heterojunction has been fabricated by a facile ultrasound strategy, which behaved as a S-scheme heterojunction with an intimate interface formed, and GA played as an electronic transportation platform to promote the separation of photo-induced charge carriers, which was certified through photoelectrochemical techniques. Density functional theory calculations revealed that the different component in ternary CdS-g-C₃N₄-GA heterojunction demonstrated an obvious difference of work function, resulting in the charge transfer from CdS to g-C₃N₄ through GA with S-scheme principle. In the optimized conditions, the S-scheme CdS-g-C₃N₄-GA heterojunction not only displayed greatly enhanced photocatalytic performances for degradation of dye and antibiotic wastewater, but also improved photocatalytic H₂ production activity. In addition, the photocatalytic mechanism and driving force of charge transfer and separation in S-scheme CdS-g-C₃N₄-GA heterojunction were studied. This study offers a feasible strategy to construct a ternary S-scheme heterojunction for environmental and energy photocatalysis.

Noval Dual-Emission Fluorescence Carbon Dots as a Ratiometric Probe for Cu2+ and ClO- Detection

The use of carbon dots (CDs) with dual emission based on ratiometric fluorescence has been attracting attention in recent times for more accurate ion detection since they help avoid interference from background noise, probe concentration, and complexity. Herein, novel dual-emission nitrogen-doped CDs (NCDs) were prepared by a simple method for Cu2+ and ClO- detection. The NCDs showed excellent anti-interference ability and selectivity for different emissions. In addition, a good linear relationship was observed between the fluorescence intensity (FI) of the NCD solutions in different emissions with Cu2+ (0-90 μM) and ClO- (0-75 μM). The limits of both Cu2+ detection and ClO- were very low, at 17.7 and 11.6 nM, respectively. The NCDs developed herein also showed a good recovery rate in water for Cu2+ and ClO- detection. Hence, they are expected to have a more extensive application prospect in real samples.

CdS/Ag2S/g-C3N4 ternary composites with superior photocatalytic performance for hydrogen evolution under visible light irradiation

CdS/Ag2S/g-C3N4 ternary composites as photocatalysts with different amounts of Ag2S were successfully synthesized through a simple chemical deposition method. These photocatalysts were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) mapping and X-ray photoelectron spectroscopy (XPS) to obtain the information of the structure and composition. Compared with the pure samples and binary composites, CdS/Ag2S/g-C3N4 ternary composites showed enhanced hydrogen production activities, and the maximum hydrogen production rate of CdS/Ag2S(2%)/CN is about 1020.54 μmol g-1 h-1 in Na2S-Na2SO3 solution. Based on the photoluminescence and electrochemical results, the improved photocatalytic activity could be attributed not only to the synergic effect of ternary components in the composite, but also to the introduction of Ag2S that provided abundant active sites for H2 production. A possible mechanism was investigated in detail.

Novel fluorescent probes based on nitrogen–sulfur co-doped carbon dots for chromium ion detection

In this work, novel carbon dots codoped with nitrogen and sulfur (NSCDs) were used as fluorescent probes to detect Cr³⁺.

A visible-light-responsive TaON/CdS photocatalytic film with a ZnS passivation layer for highly extraordinary NO2 photodegradation

Recently, TaON has become a promising photoelectrode material in the photocatalytic field owing to its suitable band gap and superior charge carrier transfer ability. In this work, we prepared a TaON/CdS photocatalytic film using a CdS nanoparticle-modified TaON film by the successive ionic layer adsorption and reaction (SILAR) method. For the first time, the ZnS nanoparticles were deposited on the TaON/CdS film using the same method. We found that pure TaON had a nanoporous morphology, thus resulting in high specific surface area and better gas adsorption capacity. Furthermore, the TaON/CdS/ZnS film displayed a highly efficient NO2 photodegradation rate under visible light irradiation owing to its stronger visible light response, photocorrosion preventive capacity, and the high separation efficiency of photo-induced electrons and holes. Interestingly, the promising TaON/CdS/ZnS film also possessed remarkable recyclability for NO2 degradation. Therefore, we suggest that the TaON/CdS/ZnS photocatalytic film might be used for the photocatalytic degradation of other pollutants or in other applications. We also put forward the feasible NO2 photocatalytic degradation mechanism for the TaON/CdS/ZnS film. From the schematic diagram, we could further obtain the photo-generated carrier transport process and NO2 photodegradation principle in detail over the ternary photocatalytic film. Moreover, the trapping experiment demonstrates that ·O2 - and h+ all play significant roles in NO2 degradation under visible light irradiation.

MoS2 nanosheets anchored on porous ZnSnO3 cubes as an efficient visible-light-driven composite photocatalyst for the degradation of tetracycline and mechanism insight

In this study, MoS₂/ZnSnO₃ (MS-ZSO) composite photocatalyst with loading MS nanosheets onto the surface of porous ZSO microcubes was synthesized using a simple hydrothermal route. The prepared MS-ZSO composite can be easily excited under visible light, and 3 % MS-ZSO exhibits an outstanding photo-degradation (>80 % in 60 min) and mineralization performance (>42 % in 60 min) of the tetracycline. A remarkable improvement in the photocatalytic activity of MS-ZSO composite derived from a positive synergistic effect of well-matched energy level positions, increasement the absorption of visible light, prolonged life time decay and improved interfacial charge transfer between MS and ZSO. In-depth investigation on charge carrier separation mechanism toward MS/ZSO composite under visible light was proposed, which was further evidenced by capture experiments and electron spin resonance (ESR) techniques. Furthermore, the corresponding intermediates of tetracycline degradation over MS-ZSO composites were inspected by liquid chromatography-mass spectrometry (LC-MS) analysis, and the possible degradation paths were proposed.

Fabrication of ternary Ag3PO4/Co3(PO4)2/g-C3N4 heterostructure with following Type II and Z-Scheme dual pathways for enhanced visible-light photocatalytic activity

A novel ternary Ag₃PO₄/Co₃(PO₄)₂/g-C₃N₄ (APO/CPO/CN) heterostructure photocatalyst was successfully synthesized via a simple precipitation method for photocatalytic degradation of tetracycline (TC) under visible light irradiation. The experimental result reveals that the ternary APO/CPO/CN heterojunction showed enhanced photocatalytic performance compared with single semiconductor CPO and CN, binary composite CPO/CN. And APO/CPO/CN-15 % composite exhibits highest photocatalytic degradation efficiency, which can degrade TC around 88 % under visible light within 120 min. The enhanced photocatalytic performance is due to the synergy effects between CPO, CN and APO with the aid of following Z-scheme and Type II heterojunction dual pathways for effective separation of photogenerated charges. This work provides a new approach in the rational design of ternary heterojunction photocatalyst with multilevel electron transfer for environmental decontamination.

Anchoring Black Phosphorus Nanoparticles onto ZnS Porous Nanosheets: Efficient Photocatalyst Design and Charge Carrier Dynamics

Black phosphorus nanoparticles (BP NPs) possess great advantages in photocatalysis owing to the rich surface active sites, extremely high carrier mobility, and strong visible-near-infrared light response. However, the complex preparation process, poor stability, and rapid carrier recombination restrict their successful application in photocatalysis. Herein, the above problems are resolved by preparing BP NPs through a facile sonication-assisted hydrothermal method. To further improve the stability and photocatalytic activity, BP NPs are tightly anchored onto ZnS to prepare ZnS-BP porous nanosheets. With the Zn-P coordination bond built between them, higher stability, enhanced carrier transport ability, and excellent hydrogen adsorption and desorption equilibrium of photocatalysts are achieved. An efficient and recyclable photocatalytic hydrogen evolution rate of 1561 μmol h^-1 g^-1 is obtained under visible-light irradiation, which is superior to that of previously reported BP-based photocatalysts. Besides, the photocatalytic mechanism is investigated based on the theoretical calculations and experimental characterizations. The charge transfer dynamics are studied by surface photovoltage (SPV), ultrafast transient absorption (TA), X-ray absorption spectra (XAS), electrochemical impedance spectroscopy (EIS), and steady-state photoluminescence (PL) spectra. This work set a reference for the design of high-performance BP-related nanomaterials in solar energy storage and conversion.

980 nm NIR light driven overall water splitting over a combined CdS–RGO–NaYF4–Yb3+/Er3+ photocatalyst

Infrared light (NIR) accounts for more than 50% of the energy donated by the Sun to the Earth, but most of this type of energy is not utilized in photocatalytic reactions.

Oxygen-defective ZnO porous nanosheets modified by carbon dots to improve their visible-light photocatalytic activity and gain mechanistic insight

A carbon dots/oxygen-defective ZnO (COZ) porous nanosheet composite photocatalyst was prepared via a one-step liquid-phase wet chemistry method for the highly efficient visible-light photocatalytic degradation of tetracycline (TC).