One-pot ultrasonic assisted sol-gel synthesis of spindle-like Nd and V codoped ZnO for efficient photocatalytic degradation of organic pollutants

A Review on the Use of Metal Oxide-Based Nanocomposites for the Remediation of Organics-Contaminated Water via Photocatalysis: Fundamentals, Bibliometric Study and Recent Advances

The improper disposal of toxic and carcinogenic organic substances resulting from the manufacture of dyes, drugs and pesticides can contaminate aquatic environments and potable water resources and cause serious damage to animal and human health and to the ecosystem. In this sense, heterogeneous photocatalysis stand out as one effective and cost-effective water depollution technique. The use of metal oxide nanocomposites (MON), from the mixture of two or more oxides or between these oxides and other functional semiconductor materials, have gained increasing attention from researchers and industrial developers as a potential alternative to produce efficient and environmentally friendly photocatalysts for the remediation of water contamination by organic compounds. Thus, this work presents an updated review of the main advances in the use of metal oxide nanocomposites-based photocatalysts for decontamination of water polluted by these substances. A bibliometric analysis allowed to show the evolution of the importance of this research topic in the literature over the last decade. The results of the study also showed that hierarchical and heterogeneous nanostructures of metal oxides, as well as conducting polymers and carbon materials, currently stand out as the main materials for the synthesis of MON, with better photocatalysis performance in the degradation of dyes, pharmaceuticals and pesticides.

Synthesis of metal anthranilate complexes: catalytic and antipathogenic studies

Background

Anthranilic acid is an active compound with diverse biological activities such as anti-inflammatory, antineoplastic, anti-malarial and α-glucosidase inhibitory properties. It can also chelate transition metals to form complexes with applications as antipathogens, photoluminescent materials, corrosion inhibitors, and catalysts.

Results

Anthranilic acid complexes (1–10) of Zn(II), Bi(III), Ag(I), Fe(II), Co(II), Cu(II), Mn(II), Al, Ni(II), and Cr(III) were synthesized and characterized using thermogravimetric (TGA), elemental analysis, FT-IR, UV–vis spectrometry, mass spectrometry and magnetic susceptibility. The morphology and size of metal complex (1–10) particles were determined by scanning electron microscope (SEM) and the surface area was determined by BET analysis. TGA and CHN analysis data indicated that the stoichiometries of complexes were 1:2 metal/ligand except for Ag(I), Al and Bi. Furthermore, DFT study was performed to optimize the structure of selected complexes. The complexes (1–10) were evaluated for their catalytic activity in the reduction of 4-nitrophenol (4-NP), antibacterial activity against S. aureus, P. aeroginosa and E. coli as well as their antifungal activity against F. solani and A. niger. The complexes were also tested against the second-stage juveniles (J₂) root-knot nematodes.

Conclusion

Co(II) complex 5 and Cu(II) complex 6 showed high catalytic activity for the reduction of 4-NP to 4-aminophenol (4-AP). Ag(I) complex 3 showed the best activity against the pathogens that were tested namely clinically important bacteria S. aureus, P. aeroginosa and E. coli, commercially important fungi F. solani and A. niger and J₂ root-knot nematodes M. javanica.

TiO2-Acetylacetone as an Efficient Source of Superoxide Radicals under Reduced Power Visible Light: Photocatalytic Degradation of Chlorophenol and Tetracycline

Visible light-sensitive TiO2-based nanomaterials are widely investigated for photocatalytic applications under high power (≥300 W) UV and visible light. The formation of charge transfer complexes (CTCs) between bidentate ligands and nanocrystalline TiO2 promotes visible light absorption and constitutes a promising alternative for environmental remediation under reduced visible light power. However, the efficiency of photodegradation, the volatilization profile of bidentates, and the role of reactive oxidizing species (ROS) are not fully understood. In this study, thermogravimetric analyses coupled with mass spectroscopy (TGA-MS) were performed on TiO2-Acetylacetone (ACAC) CTC. TiO2-ACAC CTC calcined at 300 °C (TiO2-A300) was applied for the photocatalytic degradation of chlorophenol (4-CP) and tetracycline (TC) under low power visible light (26 W). Furthermore, the ROS scavengers isopropanol and benzoquinone were added for studying the photocatalytic role of •OH and •O2− radicals. The TGA-MS showed the release of ACAC fragments, such as ethyl ions and acetone, in the range between 150 °C and 265 °C, while between 300 °C and 450 °C only CO2 and H2O were released during oxidation of ACAC. The photocatalytic abatement of tetracycline (68.6%), performed by TiO2-A300, was ~two times higher than that observed for chlorophenol (31.3%) after 6 h, indicating a distinct participation of ROS in the degradation of these pollutants. The addition of the ROS scavenger revealed •O2− radicals as primarily responsible for the high efficiency of TiO2-ACAC CTC under reduced visible light. On the other hand, the •OH radicals are not efficiently generated in the CTC. Therefore, the development of heterostructures based on TiO2-ACAC CTC can increase the generation of ROS through coupling with semiconductors capable of generating •OH under visible light.

Photocatalytic degradation of Reactive Blue 21 dye using ZnO nanoparticles: experiment, modelling, and sensitivity analysis

This paper presents the photocatalysis, adsorption, and photolysis of C.I. Reactive Blue 21 dye using synthesized zinc oxide nanoparticles. The density, mean particle diameter, surface area, and porosity of the catalyst were 5550 kg/m³, 1.19 × 10^-7, 16,830 m²/kg, and 0.08, respectively. The impact of catalyst mass per volume of solution (0.2-1.0 kg/m³) was experimentally investigated in terms of the percentage of dye degradation. Due to the small catalyst porosity, adsorption contributed little to overall degradation. However, the photolysis of the dye was around 12.5%, which occurred predominantly between 0 and 5 min. In the second part of the present study, the photocatalytic degradation of C.I. Reactive Blue 21 was modelled mathematically based on the mass conservation law in the solution and catalyst. The model had two adjustable variables: the convection mass transfer coefficient and the photocatalytic reaction rate constant. The model was solved numerically using the finite difference method and was validated with the experimental data. The validated model was employed to examine the impact of catalyst size and initial pollutant concentration on the photocatalytic degradation.

Biocide mechanism of highly efficient and stable antimicrobial surfaces based on zinc oxide-reduced graphene oxide photocatalytic coatings

Highly efficient photoactive antimicrobial coatings were obtained using zinc oxide-reduced graphene oxide nanocomposites (ZnO-rGO). Their remarkable antibacterial activity and high stability demonstrated their potential use for photoactive biocide surfaces. The ZnO-rGO nanocomposites were prepared by the sol-gel technique to create photocatalytic surfaces by spin-coating. The coatings were deeply characterised and several tests were performed to assess the antibacterial mechanisms. rGO was homogeneously distributed as thin sheets decorated with ZnO nanoparticles. The surface roughness and the hydrophobicity increased with the incorporation of graphene. The ZnO-rGO coatings exhibited high activity against the Gram-positive bacterium Staphylococcus aureus. The 1 wt% rGO coated surfaces showed the highest antibacterial effect in only a few minutes of illumination with up to 5-log reduction in colony forming units, which remained essentially free of bacterial colonization and biofilm formation. We demonstrated that these coatings impaired the bacterial cells due to cell membrane damage and intracellular oxidative stress produced by the photogenerated reactive-oxygen species (ROS). The enhancement of the ZnO photocatalytic performance upon rGO incorporation is due to the increased detected generation of hydroxyl radicals, attributed to the reduction of electron-hole pair recombination. This intimate contact between both components also conveyed stability against zinc leaching and improved the coating adhesion.

F-doped ZnO nano- and meso-crystals with enhanced photocatalytic activity in diclofenac degradation

Diclofenac (DCF), a non-steroidal anti-inflammatory drug, is considered one of the most widespread emerging contaminants. Its incidence in water can favor the growth of drug-resistant bacteria and harm aquatic organisms endangering both the human health and the ecosystem. Advanced oxidation processes (AOPs) based on the action of reactive oxygen species are very effective technologies for the removal of this contaminant from water. In this context, ZnO is one of the most studied semiconductors for photocatalytic water treatment. In this work, the photocatalytic activity of fluorine-doped ZnO nano- and meso-crystals synthesized by a hydrothermal approach is reported, exploring the role of a low F atomic concentration (0.25, 0.5 and 1 at. %) on the degradation of DCF in comparison with bare ZnO. All doped samples show high rates of DCF degradation and mineralization, which were realized primarily thanks to their high efficiency in the generation of hydroxyl radicals (OH). The property-structure-function relationships of the materials are investigated by complementary techniques, such as SEM, XRD, EPR, UV-vis DRS and PL, with the aim to evaluate the role of fluorine in determining their morphological, electronic and optical properties.

Synthesis and photocatalytic degradation activities of phosphorus containing ZnO microparticles under visible light irradiation for water treatment applications

A series of phosphorus containing ZnO (P-ZnO) photocatalysts with various percentages of phosphorus were successfully synthesized using the hydrothermal method. The structural, physical and optical properties of the obtained microparticles were investigated using diverse techniques such as X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible diffusion reflectance spectroscopy (UV-Vis DRS), photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and N₂ adsorption-desorption analysis. The photocatalytic activities of the pure and P-ZnO samples were evaluated for the degradation of Rhodamine B (RhB) under visible light irradiation. The parameters such as pH, catalyst dosage, contaminant concentration and effect of persulfate as an oxidant were studied. It was found that the P-ZnO1.8% photocatalyst could destroy 99% of RhB (5 ppm) in 180 min at pH = 7; furthermore, it degraded ∼100% of 5 and 10 ppm of the RhB pollutant in 120 and 180 min, respectively, only by adding 0.01 g of persulfate into the reaction solution. To determine the photocatalytic mechanism, 2-propanol, benzoquinone and EDTA were used and it was indicated that hydroxyl radicals, superoxide ions and holes, all had major roles in the photocatalytic degradation but the hydroxyl radical effect was the most significant. The phenol degradation was also investigated using the P-ZnO1.8% optimum photocatalyst which could destroy 53% of the phenol (5 ppm) in 180 min. According to the reusability test, it was proved that after 5 cycles, the catalyst activity was not highly changed and it was potentially capable of pollutant degradation.