CdZnS solid solution supported Ce2Sn2O7 pyrochlore photocatalyst that proves to be an efficient candidate towards the removal of organic pollutants

Novel pyrochlore type europium stannate - tungsten disulfide heterostructure for light driven carbon dioxide reduction and nitrogen fixation

The reduction of carbon dioxide (CO2) and nitrogen (N2) to value-added products is a substantial area of research in the fields of sustainable chemistry and renewable energy that aims at reducing greenhouse gas emissions and the production of alternative fuels and chemicals. The current work deals with the synthesis of pyrochlore-type europium stannate (Eu2Sn2O7: EuSnO), tungsten disulfide (WS2:WS), and novel EuSnO/WS heterostructure by a simple and facile co-precipitation-aided hydrothermal method. Using different methods, the morphological and structural analyses of the prepared samples were characterized. It was confirmed that a heterostructure was formed between the cubic EuSnO and the layered WS. Synthesized materials were used for photocatalytic CO2 and N2 reduction under UV and visible light. The amount of CO and CH4 evolved due to CO2 reduction is high in EuSnO/WS (CO = 104, CH4 = 64 μmol h-1 g-1) compared to pure EuSnO (CO = 36, CH4 = 70 μmol h-1 g-1) and WS (CO = 22, CH4 = 1.8 μmol h-1 g-1) under visible light. The same trend was observed even in the N2 fixation reaction under visible light, and the amount of NH4+ produced was found to be 13, 26, and 41 μmol h-1 g-1 in the presence of WS, EuSnO and EuSnO/WS, respectively. Enhanced light-driven activity towards CO2 and N2 reduction reactions in EuSnO/WS is due to the efficient charge separation through the formation of type-II heterostructure, which is in part associated with photocurrent response, photoluminescence, and electrochemical impedence spectroscopic (EIS) results. The EuSnO/WS heterostructure's exceptional stability and reusability may pique the attention of pyrochlore-based composite materials in photocatalytic energy and environmental applications.

Dual Z-scheme heterojunction Ce2Sn2O7/Ag3PO4/V@g-C3N4 for increased photocatalytic degradation of the food additive tartrazine, in the presence of persulfate: Kinetics, toxicity, and density functional theory studies

This study involved the synthesis of a Ce2Sn2O7/Ag3PO4/V@g-C3N4 composite through hydrothermal methods, followed by mechanical grinding. The resulting heterojunction exhibited improved catalytic activity under visible light by effectively separating electrons and holes (e-/h+). The degradation of Tartrazine (TTZ) reached 93.20% within 50 min by employing a ternary composite at a concentration of 10 mg L-1, along with 6 mg L-1 of PS. The highest pseudo-first-order kinetic constant (0.1273 min-1 and R2 = 0.951) was observed in this system. The dual Z-scheme heterojunction is developed by Ce2Sn2O7, Ag3PO4, and V@g-C3N4, and it may increase the visible light absorption range while also accelerating charge carrier transfer and separation between catalysts. The analysis of the vulnerability positions and degradation pathways of TTZ involved the utilization of density functional theory (DFT) and gas chromatography-mass spectrometry (GC-MS) to examine the intermediate products. Therefore, Ce2Sn2O7/Ag3PO4/V@g-C3N4 is an excellent ternary nanocomposite for the remediation of pollutants.

Dual-channel MIRECL portable devices with impedance effect coupled smartphone and machine learning system for tyramine identification and quantification

We designed a novel, portable, and visual dual-potential molecularly imprinted ratiometric electrochemiluminescence (MIRECL) sensor for tyramine (TYM) detection based on smartphone and deep learning-assisted optical devices. Molecularly imprinted polymer-Ce2Sn2O7 (MIP-Ce2Sn2O7) layers were fabricated by in-situ electropolymerization method as the capture and signal amplification probe. Oxygen vacancies in Ce2Sn2O7 not only enhance the electrochemical redox capability but also accelerate the energy transfer, thereby enhancing the luminescence of cathode ECL. Under optimal conditions, the ECL signals of MIP-Ce2Sn2O7 at the cathode and the anode response of Ru(bpy)32+ was reduced, thus a wide linear range from 0.01 μM to 1000 μM with the detection limit as low as 0.005 μM. Interestingly, combined with an artificial intelligence image recognition algorithm and the principle of optical signal reading by smartphone, the developed MIRECL sensor has been applied to the portable and visual determination of TYM in aquatic samples, and its practicability has been satisfactorily verified.

Sonochemical synthesis and characterization of Sm2CuO4 nanostructures and their application as visible-light photocatalyst for degradation of water-soluble organic pollutants

In recent years, water contamination has become a significant crisis, and it is crucial to find new materials that can efficiently eliminate these contaminants. The current work presents the Sm2CuO4 nanophotocatalyst for the decolorization of different water-soluble organic contaminants. The fabrication of Sm2CuO4 nanostructures was achieved using a simple and rapid sonochemical pathway, resulting in an optical bandgap of 1.62 eV as determined by diffuse reflectance spectroscopy. Several factors, including different organic contaminants, organic contaminant concentrations, Sm2CuO4 dosages, and the pH of the media, were scrutinized to achieve the best efficiency. The results manifested that Sm2CuO4 was highly effective in removing different organic contaminants from water. For example, when 30 mg of Sm2CuO4 was used with 20 mg L-1 methyl orange under visible irradiation for 100 min, 91.4% of the methyl orange was destroyed. Further investigation revealed that holes (h+) were primarily responsible for pollutant photodegradation when using Sm2CuO4 as a photocatalyst. This finding suggests that Sm2CuO4 could be an excellent candidate for developing new materials to effectively remove water contaminants.

A sensitive dual-signal electrochemiluminescence immunosensor based on Ru(bpy)32+@HKUST-1 and Ce2Sn2O7 for detecting the heart failure biomarker NT-proBNP

A sensitive dual-signal electrochemiluminescence (ECL) immunosensor was proposed based on Ru(bpy)₃²⁺@HKUST-1/TPA and Ce₂Sn₂O₇/K₂S₂O₈ probes for detecting the NT-proBNP biomarker of heart failure. HKUST-1 with a high specific surface area facilitates the loading of more Ru(bpy)₃²⁺, effectively improving the anodic signal intensity, while the emerging Ce₂Sn₂O₇ emitter displays a potential-matching cathodic emission with moderate intensity. Two ECL probes were characterized with field emission scanning electron microscopy, X-ray diffraction, XPS, FT-IR spectroscopy and UV-Vis diffuse reflectance spectroscopy. This dual-signal immunosensor has a wide linear range (5 × 10^-4-1 × 10⁴ ng mL^-1) and a low quantitative detection limit, simultaneously showing high sensitivity, stability and reproducibility, as well as the detection capability of actual serum samples. This dual signal-calibrated immunoassay platform not only reduces the false positive rate of detection results but also provides a promising method for the early diagnosis of heart failure.

Construction of a C-decorated and Cu-doped (Fe,Cu)S/CuFe2O4 solid solution for photo-Fenton degradation of hydrophobic organic contaminant: Enhanced electron transfer and adsorption capacity

To effectively treat the hydrophobic organic contaminant and utilize an industrial solid waste manganese residue (MR), a novel starch-derived carbon (SC)-decorated and Cu-doped (Fe,Cu)S/CuFe₂O₄ solid solution (CFS/CFO@SC) was prepared from MR via mechanical activation treatment of precursor materials followed by one-step pyrolysis and applied as a photo-Fenton catalyst to treat a hydrophobic organic compound, 17α-ethinylestradiol (EE2). Characterization results showed that the CFS/CFO@SC solid solution with unique crystal and electronic structures exhibited high adsorption capacity and catalytic activity, ascribed to that Cu doping and C decorating enhanced its hydrophobicity and BET surface area. The CFS/CFO@SC showed excellent degradation efficiency with nearly 100% of EE2 removal rate in 40 min (degradation rate constant of 0.112 min^-1), and a high mineralization degree with 95.2% of TOC removal in 180 min. This could be ascribed to that C decorating and the formation of CFS/CFO solid solution promoted the charge transfer in a continuous band, resulting in effective separation of photogenerated holes-electrons (h⁺-e^-). The strong interaction of Fe-Cu collaborating with the photoelectron could effectively accelerate the recycle of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺, thus generating more active radicals. Moreover, CFS/CFO@SC showed promising stability and recyclability with the EE2 removal rates all >95% after five cycles. This work brings a valuable approach for the rational design of high-performance Fe-based photo-Fenton catalysts for environmental remediation and the valorization of MR.

Label-Free and Ultrasensitive Electrochemiluminescent Immunosensor Based on Novel Luminophores of Ce2Sn2O7 Nanocubes

In this research article, a novel and simple label-free electrochemiluminescence (ECL) immunosensor using cerium stannite (Ce₂Sn₂O₇) nanocubes as brand-new ECL emitters has been suggested for the first time. Ce₂Sn₂O₇ nanocubes prepared by a simple hydrothermal method displayed bright ECL emission, promising biocompatibility, low noxiousness, and perfect stability. On comparison of ECL and photoluminescence (PL) spectra, a surface-state mechanism was proposed to be involved in the ECL emission. After aminofunctionalization with 3-aminopropyltriethoxysilane (APTES), Ce₂Sn₂O₇ could be decorated with gold nanoparticles through Au-NH₂ covalent linkage, which yielded Au@Ce₂Sn₂O₇ nanocomposites and further enhanced the ECL emission. To confirm the proposed immunosensor feasibility, carcinoembryonic antigen (CEA) was employed as an exemplary analyte. Based on the abovementioned points, our fabricated immunosensor improved the ECL performance to CEA concentrations in a linear range of 0.001-70 ng/mL with a low limit of detection of 0.53 pg/mL (S/N = 3). With outstanding stability, reproducibility, and specificity, this method is expected to be an innovative one for sensitive analyses of CEA and other biomarkers in real samples.

Highly efficient In2S3/WO3 photocatalysts: Z-scheme photocatalytic mechanism for enhanced photocatalytic water pollutant degradation under visible light irradiation

A Z-scheme system In₂S₃/WO₃ heterojunction was fabricated via a mild hydrothermal method and further applied for photocatalytic degradation of tetracycline (TCH) and Rhodamine B (Rh B) under visible light irradiation. The morphological structure, chemical composition and optical properties were studied by XRD, SEM, HRTEM and UV-visible absorption spectra. The results revealed that In₂S₃/WO₃ hierarchical structures were successfully constructed, and the prepared In₂S₃/WO₃ photocatalysts exhibited enhanced visible-light absorption compared to pure WO₃ nanorods, which are essential to improve the photocatalytic performance. The degradation rate of TCH using the In₂S₃(40 wt%)/WO₃ heterostructure (WI40) photocatalyst was about 212 times and 22 times as high as that for pure WO₃ and pure In₂S₃, respectively. The degradation rate of Rh B with the WI40 photocatalyst was about 56 times the efficiency of pure WO₃ and 7.6 times that of pure In₂S₃. The results of the surface photovoltage (SPV), transient photovoltage (TPV) and reactive oxidation species (ROS) scavenger experiments indicated that the Z-scheme system of In₂S₃/WO₃ is favorable for photoexcited charge transfer at the contact interface of In₂S₃ and WO₃, which benefits the charge separation efficiency and depresses the recombination of photoexcited charge, resulting in favorable photocatalytic pollutant degradation efficiency under visible light irradiation.

A Z-scheme system In₂S₃/WO₃ heterojunction was fabricated via a mild hydrothermal method and further applied for photocatalytic degradation of tetracycline (TCH) and Rhodamine B (Rh B) under visible light irradiation.

Z-scheme TiO2@Ti3C2/Cd0.5Zn0.5S nanocomposites with efficient photocatalytic performance via one-step hydrothermal route

Photocatalytic degradation of pollutants has been proved to be an effective strategy for wastewater treatment. Herein, TiO₂ nanoparticles were synthesized on a Ti₃C₂ matrix by in situ growth, forming Z-scheme TiO₂@Ti₃C₂/Cd_0.5Zn_0.5S (TO/CZS) multilevel structured nanocomposites via one-step hydrothermal route. The effects of hydrothermal temperature and Cd_0.5Zn_0.5S content on microstructure and properties of composites were assessed. TO/CZS nanocomposites were probed into phase composition, morphological and optical properties with x-ray diffractometer, infrared radiation, scanning electron microscope and UV-vis reflective spectra. Following the hydrothermal reaction at 160 °C for 12 h, TiO₂ nanoparticles of 30 nm in diameter were generated in situ on Ti₃C₂ lamina and Cd_0.5Zn_0.5S particles were evenly distributed on the Ti₃C₂ matrix. The photocatalytic activity of TO/CZS composites were evaluated, which found that degradation rate constant (k = 0.028 min^-1) of TO/CZS-40 on Rhodamine B was 5.19 times that of pure TiO₂ and 4.48 times that of Cd_0.5Zn_0.5S. Through anchoring Ti₃C₂ as an electron transition mediator and combination with TiO₂ and Cd_0.5Zn_0.5S, the new Z-scheme between TiO₂ oxidized by Ti₃C₂ and Cd_0.5Zn_0.5S establishes a multilevel structure of separating electron-hole pairs. This work demonstrates a valid way to control electrons and hole transfer directions efficiently through designing multilevel semiconductor structural designs.

Pyrochlore oxides as visible light-responsive photocatalysts

This perspective describes the use of pyrochlore oxides in photocatalysis with focus on the strategies to enhance their activity.

Bridging and synergistic effect of the pyrochlore like Bi2Zr2O7 structure with robust CdCuS solid solution for durable photocatalytic removal of the organic pollutants

Herein, a strong redox ability photocatalyst of CdCuS solid solution composited with pyrochlore like Bi₂Zr₂O₇ has been fabricated by the simple hydrothermal method. The robust CdCuS solid solution materials perform the supporting role to the Bi₂Zr₂O₇ nano materials. The structural, optical, valence and vibrational states of the prepared heterostructure materials were analyzed using various characterization techniques. The photocatalytic activity of the as-synthesized Bi₂Zr₂O₇/CdCuS heterostructure has been verified under direct solar light and ambient conditions. The synthesized Bi₂Zr₂O₇/CdCuS nano combination exhibits a better photocatalytic activity for the removal of methylene blue and 4-nitrophenol organic probe molecules. The heterostructure formation between the samples is confirmed by HRTEM analysis. The improved rate of the photocatalytic reaction of the samples is attributed to the formation of heterostructures at the interface. The close interfacial contact between the two materials discloses the effective charge transfer, which leads to suppressed charge carrier recombination. The enhanced photo catalytic activity of redox-mediator-free-Bi₂Zr₂O₇/CdCuS heterostructure, possibly will be credited to the robust redox ability and the several charge transfer channels in the tight contact. The chief radicals produced in the catalytic reduction reaction have been predicted by the scavenger trapping methods and the results are discussed in detail. The obtained information from this study on Bi₂Zr₂O₇/CdCuS delivers some new visions for the design of active photocatalysts with multiple benefits.

Photocatalytic degradation mechanism for CdCuS solid solution supported pyrochlore like Bi₂Zr₂O₇.

0D/2D spatial structure of CdxZn1−xS/Ni-MOF-74 for efficient photocatalytic hydrogen evolution

A novel zero-dimensional/two-dimensional Cd_xZn_1−xS/Ni-MOF-74 (CZS/NMF) heterojunction was rationally constructed via a simple hydrothermal and physical mixing method.