The oxidative degradation of diclofenac using the activation of peroxymonosulfate by BiFeO3 microspheres—Kinetics, role of visible light and decay pathways

One-Step Decoration of Subnanometer MoOx Clusters on Bi11VO19 Nanotubes for Visible-Light-Driven Water Oxidation

For the sluggish reaction kinetics due to a four-electron transfer process, water oxidation is always a major obstacle to solar splitting of water to hydrogen. It remains a tough challenge to develop efficient nonnoble-metal photocatalysts for water oxidation. Herein, we decorate the host photocatalyst of Bi11VO19 nanotubes with the coatalyst of subnanometer MoOx clusters (denoted as Bi11VO19/MoOx hetero-nanotubes) via a one-step cation-exchange solvothermal reaction using Na2V6O16 nanowires as the hard template. It is observed that the morphology and microstructure of Bi11VO19/MoOx hetero-nanotubes vary with the dosage of Mo source and polyvinylpyrrolidone, as well as with the solvent composition. The optimized Bi11VO19/MoOx hetero-nanotubes significantly enhance the photooxidation of water to oxygen with visible light, delivering an oxygen production rate of 790 μmol g-1 h-1, which is 12 times that of bare Bi11VO19 nanotubes. In situ X-ray photoelectron spectroscopy and (photo)electrochemical characterization suggest that the enhanced photoactivity may be caused by the decorated cocatalyst of MoOx clusters, which extracts electrons from Bi11VO19 nanotubes, leaving an abundance of holes for water photooxidation. This work demonstrates a potential strategy to develop photocatalysts for energy conversion by constructing Bi11VO19-based nanostructures.

The mechanism and reaction kinetics of visible light active bismuth oxide deposited on titanium vanadium oxide for aqueous diclofenac photocatalysis

Non-uniform, non-spherical bismuth oxide deposited on titanium vanadium oxide (3%-BVT1) was successfully synthesized via co-precipitation method and assessed for visible light degradation of aqueous diclofenac. The synthesized photocatalysts were characterized using X-ray diffraction, diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and high-resolution transmission electron microscopy. Up to 80.7% diclofenac degradation was observed with a significant increment in reaction rate compared to commercially available Degussa P25 (kapp = 0.0013 → 0.0083 min-1) achieved within 3 h treatment time under optimized parameters of diclofenac concentration (10 mg L-1), catalyst loading (0.1 g L-1), and pH (5). The enhanced photocatalysis could be due to electron-hole separation and contribution of powerful oxidative species •OH > O2•-  > h+  >  > e-. The recyclability experiments indicate that 3%-BVT1 retained its efficiency up to 74.1% over five reaction cycles. Gas chromatography-mass spectrometry analysis indicated the formation of several transformation products during the degradation pathway. The studies of interfering ions depicted mild interference by sulfates, while interference by phosphates and nitrates was negligible during photocatalytic process, i.e., 70, 78.01, and 78.43% for the selected concentrations of 50, 25, and 40 mg L-1 as per their maximum concentrations detected in the natural wastewaters. Thus, 3%-BVT1 is a potential versatile candidate to treat various organic pollutants including pharmaceuticals.

Highly dispersed Fe7S8 anchored on sp2/sp3 hybridized carbon boosting peroxymonosulfate activation for enhanced EOCs elimination though singlet oxygen-dominated nonradical pathway

The synergistic effect of carbon materials with high sp2/sp3 hybridized carbon ratio and metal materials can enhance the efficiency of peroxymonosulfate (PMS) based advanced oxidation processes. In this study, a composite of highly dispersed Fe7S8 anchored on sp2/sp3 hybridized carbon (Fe7S8@HC) was developed by a facile synthesis for PMS activation. Within 10 min, the removal efficiency of the target pollutant doxycycline (DOX) could reach ca. 96 % in optimal Fe7S8@HC/PMS system through a 1O2-dominated non-radical pathway. Correlation mechanism analysis revealed that thiophene S, sp2/sp3 ratio and Fe(II) were critical factors for elongating of the O-O bond of PMS. Moreover, the Fe7S8@HC/PMS system exhibited favorable adaptability to interference such as common inorganic anions, humic acid and pH changes and could effectively remove various organic pollutants with low ionization potential. Moreover, the system maintained high DOX removal efficiency by running 30 cycles in a continuous flow reactor. Finally, susceptible sites of DOX and four degradation pathways were proposed by density functional theory calculation and LC-MS detection. This work not only offered new insights into the design of high-performance catalysts combining metal and biomass-based carbon materials, but also provided technical support for the remediation of water bodies containing emerging organic contaminants.

Ferrite bismuth-based nanomaterials: From ferroelectric and piezoelectric properties to nanomedicine applications

Bismuth ferrite (BiFeO3), a perovskite-type oxide, possesses unique morphology and multiferroicity, rendering it highly versatile for various applications. Recent investigations have demonstrated that BiFeO3 exhibits enhanced Fenton-like and photocatalytic behaviors, coupled with its piezoelectric/ferroelectric properties. BiFeO3 can catalytically generate highly oxidative reactive oxygen species (ROS) when exposed to hydrogen peroxide or light irradiation. Consequently, bismuth ferrite-based nanomaterials have emerged as promising candidates for various biomedical applications. However, the precise fabrication of BiFeO3-based materials with controllable features and applications in diverse biomedical scenarios remains a formidable challenge. In this review, we initially summarize the Fenton reaction property, ferroelectric, and piezoelectric properties of BiFeO3. We further survey the current methodologies for synthesizing BiFeO3 nanomaterials with diverse morphologies. Subsequently, we explore the effects of element doping and heterojunction formation on enhancing the photocatalytic activity of BiFeO3, focusing on microstructural, electronic band structure, and modification approaches. Additionally, we provide an overview of the recent advancements of BiFeO3-based nanomaterials in biomedicine. Finally, we discuss the prevailing obstacles and prospects of BiFeO3 for biomedical applications, offering valuable insights and recommendations for forthcoming research endeavors.

The role of reactive phosphate species in the abatement of micropollutants by activated peroxymonosulfate in the treatment of phosphate-rich wastewater

This study investigated the mechanisms of forming reactive species to degrade micropollutants through the activation of peroxymonosulfate (PMS) by phosphate, a prevalent ion in wastewater. Considering the density functional theory results, the formation of hydrogen bonds between phosphate and PMS molecules might be the crucial step in the overall reactions, which prefers producing ⋅OH and reactive phosphate species (RPS, namely H2PO4⋅, HPO4⋅-, and PO4⋅2-) to yielding SO4⋅-. Besides, in the phosphate (5 mM)/PMS system at pH = 8, HPO4⋅- was modeled to be the dominant radical with a steady-state concentration of 3.6 × 10-12 M, which was 666 and 773 times higher than those of ⋅OH and SO4⋅-. The contributions of 1O2, ⋅OH, SO4⋅-, and RPS to the micropollutant decomposition in phosphate/PMS were studied, and RPS were found to be selective for micropollutants with electron-donating moieties (such as phenolic and aniline groups). Additionally, the degradation pathways of bisphenol A, diclofenac, ibuprofen, and atrazine in phosphate/PMS were proposed according to the detected transformation products. Cytotoxicity analysis was carried out to evaluate the potential environmental impacts resulting from the degradation of micropollutants by phosphate/PMS. This study confirmed the significance of RPS for micropollutant degradation during PMS-based treatment in phosphate-rich scenarios.

Significant roles of surface functional groups and Fe/Co redox reactions on peroxymonosulfate activation by hydrochar-supported cobalt ferrite for simultaneous degradation of monochlorobenzene and p-chloroaniline

CoFe₂O₄/hydrochar composites (FeCo@HC) were synthesized via a facile one-step hydrothermal method and utilized to activate peroxymonosulfate (PMS) for simultaneous degradation of monochlorobenzene (MCB) and p-chloroaniline (PCA). Additionally, the effects of humic acid, Cl^-, HCO₃^-, H₂PO₄^-, HPO₄^2- and water matrices were investigated and degradation pathways of MCB and PCA were proposed. The removal efficiencies of MCB and PCA were higher in FeCo@HC140-10/PMS system obtained under hydrothermal temperature of 140 °C than FeCo@HC180-10/PMS and FeCo@HC220-10/PMS systems obtained under higher temperatures. Radical species (i.e., SO₄^•-, •OH) and nonradical pathways (i.e., ¹O₂, Fe (IV)/Co (IV) and electron transfer through surface FeCo@HC140-10/PMS* complex) co-occurred in the FeCo@HC140-10/PMS system, while radical and nonradical pathways were dominant in degrading MCB and PCA respectively. The surface functional groups (i.e., C-OH and CO) and Fe/Co redox cycles played crucial roles in the PMS activation. MCB degradation was significantly inhibited in the mixed MCB/PCA solution over that in the single MCB solution, whereas PCA degradation was slightly promoted in the mixed MCB/PCA solution. These findings are significant for the provision of a low-cost and environmentally-benign synthesis of bimetal-hydrochar composites and more detailed understanding of the related mechanisms on PMS activation for simultaneous removal of the mixed contaminants in groundwater.

Enhanced activation of peroxymonosulfate by a floating FeMo3Ox/C3N4 photocatalyst under visible-light assistance for oxytetracycline degradation: Performance, mechanisms and comparison with H2O2 activation

In this study, a floating FeMo₃O_x/C₃N₄-EP (FM-C-P) composite with highly stability and reusability was synthesized by an impregnation/calcination process and used to activate peroxymonosulfate (PMS) for oxytetracycline (OTC) degradation under visible light irradiation. The results demonstrated that 98.1% of OTC (50 mg/L) removal can be achieved by the activation of PMS (5 mM) using FM-C-P (1 g/L) in 30 min under visible light irradiation. The pseudo-first-order rate constant was calculated to be 0.181 min^-1. The degradation process with PMS was hardly affected by pH (3-11) and co-existing substance. ·SO₄^-, ·OH, ·O₂^- and ¹O₂ were produced in the Vis/PMS/FM-C-P system and ¹O₂ was determined to be the main reactive oxygen species (ROSs). The high efficiency of ROSs production mainly contributed to two mechanisms. Firstly, via the combination of ≡Fe (II)-·SO₅^- and free state ·SO₅^-, ¹O₂ could be generated on the Fe-N_x site. Secondly, photo-induced electrons in the FeMo₃O_x/g-C₃N₄ heterojunction could react with Fe (III) and Mo (VI) to form catalytically active species Fe (II) and Mo (IV). Moreover, the proposed degradation pathway and the toxicity of intermediated products was analyzed. Overall, this study was expected to deepen the understanding of the photo-assisted PMS activation and the generation of ¹O₂ with the presence of metal-oxide/C₃N₄ heterojunction.

Heterogeneous catalytic activation of peroxydisulfate toward degradation of pharmaceuticals diclofenac and ibuprofen using scrap printed circuit board

Pharmaceutical residues have been identified as a priority contaminant due to their toxicity to organisms and the ecosystem as representative refractory organic compounds in water. Therefore, using efficient treatment methods to remove them from wastewater has become a crucial topic of research. Advanced oxidation processes (AOPs) based on the sulfate radical have gained increased attention in recent years due to their superior performance and adaptability in the decomposition of refractory organic contaminants. In this work, scrap printed circuit boards (PCBs) were used to prepare a low-cost and efficient heterogeneous peroxydisulfate (PDS) catalytic activator via thermal treatment with an air combustion non-carbonized catalyst (NCC) and pyrolysis with a nitrogen carbonized catalyst (CC) for the removal of diclofenac (DCF) and ibuprofen (IBF) from water at circumneutral pH. The synthesized catalysts were characterized by several analytical techniques. The effects of various experimental parameters on the removal efficiency were examined. Under optimum conditions, the degradation efficiency reached 76% and 71% with NCC and 63% and 57.5% with CC within 60 min for DCF and IBP, respectively. The mineralization efficiency as measured by TOC removal reached up to 65% after 60 min treatment. The degradation kinetics for both catalysts followed the pseudo-first-order model. Results from quenching tests showed that the reactive oxidizing species (ROS), including ¹O₂ > SO₄˙^- > ˙OH, were generated mainly in the NCC/PDS and CC/PDS systems. Overall, the prepared catalysts were found to be effective and reusable for PDS activation for the removal of pharmaceutical pollutants from water. This study provided a promising, robust and efficient heterogeneous catalytic PDS activation based on the strategy of "waste-treats-waste" for the removal of pharmaceutical pollutants from water.

Fate, transformation and toxicological implications of environmental diclofenac: Role of mineralogy and solar flux

Diclofenac is an emerging surface water contaminant, yet the environmental impact of its degradation products remains elusive. The current study focuses on mineralogy-controlled diclofenac photo-degradation and its potential health impacts. Under irradiated conditions, we studied the effects of kaolinite, hematite, and anatase on diclofenac degradation. Our results showed that kaolinite doubled the diclofenac degradation rate, which can be attributed to the high catalytic effect, mediated via increased surface area and pore size of mineral surface in the low pH. Conversely, anatase, a crystal phase of titanium dioxide (TiO₂), diminished the diclofenac degradation compared to treatments without TiO₂. Hematite, on the other hand, showed no effect on diclofenac degradation. Photo-degradation products also varied with the mineral surface. We further assessed in vitro toxicological effects of photo-degraded products on two human cell lines, HEK293T and HepG2. Biological assays confirmed that photo-degraded compound 6 (1-(2,6-dichlorophenyl)indolin-2-one) decreased HEK293T cell survival significantly (p < 0.05) when compared to diclofenac in all concentrations. At lower concentrations, inhibition of HEK293T cells caused by compounds 4 (2-(8-chloro-9H-carbazol-1-yl)acetic acid), and 5 (2-(9H-carbazol-1-yl)acetic acid) was greater than diclofenac. Compound 7 (1-phenylindolin-2-one) was toxic only at 250 µM. Additionally, compound 6 decreased HepG2 cell viability significantly when compared to diclofenac. Overall, our data highlighted that mineralogy plays a vital role in environmental diclofenac transformation and its photo-degraded products. Some photo-degraded compounds can be more cytotoxic than the parent compound, diclofenac.

Visible Light-Driven Advanced Oxidation Processes to Remove Emerging Contaminants from Water and Wastewater: a Review

The scientific data review shows that advanced oxidation processes based on the hydroxyl or sulfate radicals are of great interest among the currently conventional water and wastewater treatment methods. Different advanced treatment processes such as photocatalysis, Fenton's reagent, ozonation, and persulfate-based processes were investigated to degrade contaminants of emerging concern (CECs) such as pesticides, personal care products, pharmaceuticals, disinfectants, dyes, and estrogenic substances. This article presents a general overview of visible light-driven advanced oxidation processes for the removal of chlorfenvinphos (organophosphorus insecticide), methylene blue (azo dye), and diclofenac (non-steroidal anti-inflammatory drug). The following visible light-driven treatment methods were reviewed: photocatalysis, sulfate radical oxidation, and photoelectrocatalysis. Visible light, among other sources of energy, is a renewable energy source and an excellent substitute for ultraviolet radiation used in advanced oxidation processes. It creates a high application potential for solar-assisted advanced oxidation processes in water and wastewater technology. Despite numerous publications of advanced oxidation processes (AOPs), more extensive research is needed to investigate the mechanisms of contaminant degradation in the presence of visible light. Therefore, this paper provides an important source of information on the degradation mechanism of emerging contaminants. An important aspect in the work is the analysis of process parameters affecting the degradation process. The initial concentration of CECs, pH, reaction time, and catalyst dosage are discussed and analyzed. Based on a comprehensive survey of previous studies, opportunities for applications of AOPs are presented, highlighting the need for further efforts to address dominant barriers to knowledge acquisition.

Application of perovskite oxides and their composites for degrading organic pollutants from wastewater using advanced oxidation processes: Review of the recent progress

In the recent years, perovskite oxides are gaining an increasing amount of attention owing to their unique traits such as tunable electronic structures, flexible composition, and eco-friendly properties. In contrast, their catalytic performance is not satisfactory, which hinders real wastewater remediation. To overcome this shortcoming, various strategies are developed to design new perovskite oxide-based materials to enhance their catalytic activities in advanced oxidation process (AOPs). This review article is to provide overview of basic principle and different methods of AOPs, while the strategies to design novel perovskite oxide-based composites for enhancing the catalytic activities in AOPs have been highlighted. Moreover, the recent progress of their synthesis and applications in wastewater remediation (pertaining to the period 2016-2022) was described, and the related mechanisms were thoroughly discussed. This review article helps scientists to have a clear outlook on the selection and design of new effective perovskite oxide-based materials for the application of AOPs. At the end of the review, perspective on the challenges and future research directions are discussed.

New insight into the regulation mechanism of visible light in naproxen degradation via activation of peroxymonosulfate by MOF derived BiFeO3

BiFeO₃ (BFO) nanocage prepared by metal-organic-framework derivatization (MOF-d) was adopted as activator to first investigate the effect mechanism of visible-light on naproxen-degradation via peroxymonosulfate (PMS) activation. MOF-d BFO expressed more excellent PMS activation ability than hydrothermal-synthetic BFO, due to highly ordered mesopores. A 3.0 times higher pseudo-first-order degradation rate constant was achieved after visible-light introduced. The quenching experiments indicated that the contribution of ROS in naproxen degradation followed the order of SO₄^•->¹O₂ ≈ •OH in MOF-d BFO/PMS/dark system, while changed into h⁺>¹O₂ > >O₂^•-≈SO₄^•-> •OH after visible-light introduced^. EPR tests first revealed that visible-light promoted ¹O₂ yield (non-radical pathway) but suppressed •OH and SO₄^•- generation (free-radical pathways). N₂-purging experiments further proved that ¹O₂ primarily originates from the reaction between h⁺ and PMS, equivalently to that between O₂ and e^--h⁺ in MOF-d BFO/PMS/vis system. Under visible-light, PMS activation via Fe (III) might be hindered by e^- filling on Fe 3d orbital and anion PMS preferred to approach h⁺ rather than e^-, resulting in the decrease of •OH and SO₄^•- yields. Moreover, PMS faces competition from adsorbed-O₂ and oxygen-vacancies for e^- capture. The degradation-pathways for naproxen in dark and under visible light were both proposed in MOF-d BFO/PMS system.

Urchin-like Co3O4 anchored on reduced graphene oxide with enhanced performance for peroxymonosulfate activation in ibuprofen degradation

Urchin-like Co₃O₄ anchored on reduced graphene oxide was easily prepared with hydrothermal reaction by using a cheap and green agent. First, the surface morphology and physicochemical properties of Co₃O₄-rGO were characterized. Compared with Co₃O₄, Co₃O₄-rGO possessed excellent activity in peroxymonosulfate (PMS) activation for ibuprofen (IBU) degradation. Then, the influences of Co₃O₄-rGO dosage, IBU concentration, PMS concentration and pH on IBU and TOC removal were investigated, respectively. Furthermore, both ·OH and SO₄^•- were identified to be the main active species, and SO₄^•- made the predominant contribution. In addition, residual PMS and SO₄^•- quantification demonstrated that Co₃O₄-rGO could activate PMS more effectively, and produce more SO₄^•-. The mechanistic study revealed that the valence state conversion of Co²⁺/Co³⁺ was the critical PMS activation mechanism. Moreover, the enhanced activity of Co₃O₄-rGO is accounted for the combination of multiple unique characteristics, including excellent electronic transmission (Co²⁺ to Co³⁺, Co²⁺ to PMS), more active sites, and chemical bonds between Co₃O₄ and rGO. 13 degradation products were determined and possible degradation routes were proposed based on the results of LC-MS/MS. Finally, the Co₃O₄-rGO/PMS system also exhibited satisfactory removal of IBU in real water matrices.

Nonprecious bimetallic Fe, Mo-embedded N-enriched porous biochar for efficient oxidation of aqueous organic contaminants

Bimetallic Fe- and Mo-embedded N-enriched porous biochar (Fe-Mo@N-BC) is developed and serves as a cost-effective and highly efficient catalyst for mineralization of non-biodegradation organic contaminants. Fe-Mo@N-BC was prepared by pyrolysis of complex Fe/Mo -containing precursors. Transmission electron microscopy and elemental mapping suggested that Fe and Mo are uniformly dispersed in nitrogen-doped biochar with hierarchical mesopores. In comparison to Fe@N-BC and Mo@N-BC, Fe-Mo@N-BC exhibited a superior activity for activating peroxymonosulfate (PMS). The stable activity was ascribed to N-doping and synergistic effect of Fe and Mo species, where both Fe-N_x and Mo-N_x can simultaneously serve as the active sites and N-BC can act as a carrier and an activator as well as an electron mediator. Electron paramagnetic resonance and quenching experiments indicated that HO^•, O₂^•- and ¹O₂ were responsible for organic degradation. The effects of PMS dosage, initial Orange II concentration, temperature, solution pH, coexisting anions and humic acids on organic degradation were also investigated. With the assistance of an external magnet, Fe-Mo@N-BC can be easily separated after reaction and remains stable in the reusability tests. This work demonstrates a feasible strategy towards the fabrication of Fe, Mo-embedded N-enriched porous biochar catalysts for the detoxification of organic contaminants.

Evaluation of diclofenac degradation effect in "active" and "non-active" anodes: A new consideration about mineralization inclination

This work investigates the electrochemical oxidation (EO) of diclofenac (DCF) in water with Ti/Ti₄O₇, Ti/Ru-Ir, Ti/Sb-SnO₂ and Ti/PbO₂ electrodes. Scanning electron microscope and X-ray diffraction results suggest that Ti/Ti₄O₇ has porous stacked surface morphology and Ti/Sb-SnO₂ possesses the smallest grain size. Linear sweep voltammetry test results indicate that PbO₂ has the highest oxygen evolution potential, while Ti/Ti₄O₇ and Ti/Ru-Ir show better oxygen evolution activity. DCF degradation results reveal that PbO₂ possessed the highest DCF removal (R_DCF = 99.2%) and chemical oxygen demand (COD) removal (R_COD = 97.0%), the fastest COD degradation rate (k = 0.0275 min^-1, R² = 0.964), the lowest specific energy consumption (EC_DCF = 1.81 kWh^.g DCF^-1, EC_TOC = 6.90 kWh^.g TOC^-1). The toxicity variation of DCF during EO process on PbO₂ is rise first and then to fall. Considering the differences of the four electrodes in residual, conversion and mineralization aspects, mineralization selectivity (MS) was proposed to estimate the mineralization inclination of electrodes during EO process, and PbO₂ displays the strongest mineralization inclination (MS = 0.594). In addition, the possible degradation pathway of DCF on PbO₂ electrode indicates a composite behavior of conversion and mineralization. All of them above indicate the promising application potential of PbO₂ in lower concentration pharmaceuticals and personal care products wastewater treatment. Moreover, MS could be employed as a supplementary index to assess the different inclinations of this composite behavior on various electrodes used for electrochemical treatment of organics in later studies.

Sunlight-Driven AO7 Degradation with Perovskites (La,Ba)(Fe,Ti)O3 as Heterogeneous Photocatalysts

Perovskites of the (La,Ba)(Fe,Ti)O3 family were prepared, characterized, and utilized as heterogeneous photocatalysts, activated by natural sunlight, for environmental remediation of Acid Orange 7 (AO7) aqueous solutions. Catalysts were prepared by the ceramic (CM) and the complex polymerization (CP) methods and characterized by XRD, SEM, EDS, and band gap energy. It was found that catalytic properties depend on the synthesis method and annealing conditions. In the photocatalytic assays with sunlight, different AO7 initial concentrations and perovskite amounts were tested. During photocatalytic assays, AO7 and degradation products concentrations were followed by HPLC. Only photocatalysis with BaFeO3-CM and BaTiO3-CP presented AO7 removals higher than that observed for photolysis. However, photolysis leads to the formation of almost exclusively amino-naphthol and sulfanilic acid, whereas some of the perovskites utilized form less-toxic compounds as degradation products, such as carboxylic acids (CA). Partial substitution of Ba by La in BaTiO3-CM does not produce any change in the photocatalytic properties, but the replacement of Ti by Fe in the La0.1Ba0.9TiO3 leads to reduced AO7 removal rate, but with the formation of CAs. The best AO7 removal (92%) was obtained with BaFeO3-CM (750 mg L-1), after 4 h of photocatalytic degradation with solar radiation.

Visible-light-driven activation of sodium persulfate for accelerating orange II degradation using ZnMn2O4 photocatalyst

A special catalytic system was obtained by using ZnMn₂O₄ (ZMO) materials to activate Na₂S₂O₈ and catalytically degrade organic dye orange II under visible light irradiation. The ZMO nanoparticles were prepared by a simple one-step method and characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS). In this study, the ZMO/Na₂S₂O₈ system was used to degrade orange II, and the degradation rate reached 97.44% in 60 min. ZMO catalysts could be recycled for at least five times, and its degradation rate was only decreased by 1.84%. The free radicals produced during the degradation of orange II were studied by classical quenching experiments, and the different types of free radicals produced in the system were further confirmed by electron paramagnetic resonance (EPR) spectroscopy. The catalytic degradation of orange II in this system was mainly caused by the production of superoxide, sulfate and hydroxyl radicals, which achieved high degradation.

Diclofenac photodegradation with the Perovskites BaFeyTi1-yO3 as catalysts

Perovskite oxides BaFe_yTi_1-yO₃, with y = 0, 0.6, 0.8 and 1, were prepared by ceramic (CM) and complex polymerization methods (CPM) and utilized in UV-LED (365 nm) photocatalytic degradation assays of 25 mg L^-1 diclofenac (DIC) model solutions. BaTiO₃-CM was also used in the photocatalytic degradation test of a real mineral water for human consumption spiked with 2 mg L^-1 DIC. The XRD patterns of the synthesized perovskites showed cubic structure for those prepared by CPM, with distortions of the cubic lattice to hexagonal or tetragonal when prepared by CM, except for BaTiO₃. All the perovskites showed good catalytic activity, higher than photolysis, except BaFeO₃-CM that presented similar results. BaTiO₃-CM and CPM and BaFeO₃-CPM were also utilized in UV-LED photocatalytic DIC degradation assays with peroxydisulfate addition. BaFeO₃-CPM and BaTiO₃-CPM showed better ability to persulfate activation, but the highest mineralization degree was obtained with BaTiO₃-CM. This last perovskite was also able to perform DIC degradation in a real matrix. The studied oxides show potentiality for photocatalytic degradation of organic compounds, with or without persulfate addition. A degradation mechanism is proposed.

A novel LaFeO3 catalyst synthesized from sodium diethylenetriamine pentamethylene phosphonate for degradation of diclofenac through peroxymonosulfate activation: degradation pathways and mechanism study

A series of LaFeO3 catalysts were prepared using the sol–gel method with sodium diethylenetriamine pentamethylene phosphonate as the complexing agent and were applied to activate PMS to produce active oxides to degrade DCF.

Enhanced activation of peroxydisulfate by strontium modified BiFeO3perovskite for ciprofloxacin degradation

A series of Sr-doped BiFeO₃ perovskites (Bi_1-xSr_xFeO₃, BSFO) fabricated via sol-gel method was applied as peroxydisulfate (PDS) activator for ciprofloxacin (CIP) degradation. Various technologies were used to characterize the morphology and physicochemical features of prepared BSFO samples and the results indicated that Sr was successfully inserted into the perovskites lattice. The catalytic performance of BiFeO₃ was significantly boosted by strontium doping. Specifically, Bi_0.9Sr_0.1FeO₃ (0.1BSFO) exhibited the highest catalytic performance for PDS activation to remove CIP, where 95% of CIP (10 mg/L) could be degraded with the addition of 1 g/L 0.1BSFO and 1 mmol/L PDS within 60 min. Moreover, 0.1BSFO displayed high reusability and stability with lower metal leaching. Weak acidic condition was preferred to neutral and alkaline conditions in 0.1BSFO/PDS system. The boosted catalytic performance can be interpreted as the lower oxidation state of Fe and the existence of affluent oxygen vacancies generated by Sr doping, that induced the formation of singlet oxygen (¹O₂) which was confirmed as the dominant reactive species by radical scavenging studies and electron spin resonance (ESR) tests. The catalytic oxidation mechanism related to major ¹O₂ and minor free radicals was proposed. Current study opens a new avenue to develop effective A-site modified perovskite and expands their application for PDS activation in wastewater remediation.

Degradation of atrazine by Bi2MoO6 activated peroxymonosulfate under visible light irradiation

In this study, bismuth molybdate (Bi₂MoO₆) nanosheets were prepared via a facile hydrothermal method and applied to activate peroxymonosulfate (PMS) for atrazine (ATZ) elimination under visible light irradiation. An effective photocatalytic synergy was observed in vis/Bi₂MoO₆/PMS system. The Bi₂MoO₆ catalyst showed an excellent stability and extremely low metal leaching in the vis/Bi₂MoO₆/PMS system which were characterized by XRD, XPS, HRTEM, SEM and FT-IR technologies. Besides, the influence of operation parameters (i.e., Bi₂MoO₆ dosage, PMS concentration, initial pH, ATZ concentration, co-existing anions, and humic acid) on the removal of ATZ were also investigated in detail. The best ATZ degradation efficiency (> 99 %) was obtained with Bi₂MoO₆ dosage of 0.6 g/L, PMS concentration of 0.8 mM, and ATZ concentration of 2.5 mg/L after 60 min. UV-vis DRS and Mott-Schottky analysis were taken to evaluate the band structure of Bi₂MoO₆. Trapping experiments and EPR detection demonstrated that superoxide radicals, hydroxyl radicals, sulfate radicals and h⁺ both contributed to ATZ degradation, of which hydroxyl radical OH) and h⁺ were the major species. Besides, the performance of vis/Bi₂MoO₆/PMS system for different pollutant removal was also investigated. Finally, the possible degradation products were monitored by UPLC-QTOF-MS/MS and the pathways of ATZ degradation were put forward. Overall, the vis/Bi₂MoO₆/PMS system shows the potential for the removal of organic pollutants in environmental remediation.

A Review Study on Sulfate-Radical-Based Advanced Oxidation Processes for Domestic/Industrial Wastewater Treatment: Degradation, Efficiency, and Mechanism

High levels of toxic organic pollutants commonly detected during domestic/industrial wastewater treatment have been attracting research attention globally because they seriously threaten human health. Sulfate-radical-based advanced oxidation processes (SR-AOPs) have been successfully used in wastewater treatment, such as that containing antibiotics, pesticides, and persistent organic pollutants, for refractory contaminant degradation. This review summarizes activation methods, including physical, chemical, and other coupling approaches, for efficient generation of sulfate radicals and evaluates their applications and economic feasibility. The degradation behavior as well as the efficiency of the generated sulfate radicals of typical domestic and industrial wastewater treatment is investigated. The categories and characteristics of the intermediates are also evaluated. The role of sulfate radicals, their kinetic characteristics, and possible mechanisms for organic elimination are assessed. In the last section, current difficulties and future perspectives of SR-AOPs for wastewater treatment are summarized.

Photo-assisted peroxymonosulfate activation via 2D/2D heterostructure of Ti3C2/g-C3N4 for degradation of diclofenac

In this paper, a two dimensional/two dimensional (2D/2D) heterostructure of Ti₃C₂/g-C₃N₄ (T/CN) was constructed and used to activate peroxymonosulfate (PMS) for the degradation of diclofenac (DCF) in water in the presence of light illumination. Compared with single photocatalytic process by T/CN (0.040/min) and with pure g-C₃N₄ nanosheets in PMS system (0.071/min), 5.0 and 3.0 times enhanced activities were achieved in the T/CN-PMS system at optimum Ti₃C₂ (1.0 wt%) loading under light illumination (0.21/min). Moreover, the decomposing processes of DCF in T/CN-PMS system were applicable in a wide initial pH range (3∼14), therefore, overcoming the limitation of pH dependence in traditional PMS system. Based on the synergistic effect of photocatalysis and PMS oxidation processes, the ¹O₂ was generated as primary reactive species for the removal of DCF in T/CN-PMS system. The DCF degradation mechanism was further proposed through the results of liquid chromatography-mass spectrometry (LC-MS) and density functional theory (DFT) calculations.