1
|
Yang Z, Peng M, Li Y, Wu X, Gui T, Li Y, Zhang F, Chen X, Kita H. Improved Esterification of Citric Acid and n-Butanol Using a Dense and Acid-Resistant Beta Zeolite Membrane. MEMBRANES 2022; 12:1269. [PMID: 36557176 PMCID: PMC9784803 DOI: 10.3390/membranes12121269] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Revised: 12/08/2022] [Accepted: 12/12/2022] [Indexed: 06/17/2023]
Abstract
In this work, a dense and acid-resistant beta zeolite membrane was applied to improve the esterification of citric acid and n-butanol, for the first time. Through the continuous removal of the by-product water via pervaporation (PV), the conversion of citric acid was significantly enhanced from 71.7% to 99.2% using p-Toluenesulfonic acid (PTSA) as catalyst. PTSA was a well-known strong acid, and the membrane kept almost no change after PV-esterification, indicating the superior acid resistance of beta zeolite membrane. Compared to the use of acid-resistant MOR zeolite membrane by PV-esterification, a consistently higher conversion of citric acid was obtained using a high-flux beta zeolite membrane. The results showed that high water permeation on the beta zeolite membrane, with good acid resistance, had a strong promoting effect on esterification, leading to an improved conversion. In addition, the citric acid conversion of 97.7% could still be achieved by PV-esterification at a low reaction temperature of 388 K.
Collapse
Affiliation(s)
- Zhengquan Yang
- State-Province Joint Engineering Laboratory of Zeolite Membrane Materials, Institute of Advanced Materials (IAM), Jiangxi Normal University, Nanchang 330022, China
| | - Mingyu Peng
- State-Province Joint Engineering Laboratory of Zeolite Membrane Materials, Institute of Advanced Materials (IAM), Jiangxi Normal University, Nanchang 330022, China
| | - Yu Li
- State-Province Joint Engineering Laboratory of Zeolite Membrane Materials, Institute of Advanced Materials (IAM), Jiangxi Normal University, Nanchang 330022, China
| | - Xiaowei Wu
- State-Province Joint Engineering Laboratory of Zeolite Membrane Materials, Institute of Advanced Materials (IAM), Jiangxi Normal University, Nanchang 330022, China
| | - Tian Gui
- State-Province Joint Engineering Laboratory of Zeolite Membrane Materials, Institute of Advanced Materials (IAM), Jiangxi Normal University, Nanchang 330022, China
| | - Yuqin Li
- State-Province Joint Engineering Laboratory of Zeolite Membrane Materials, Institute of Advanced Materials (IAM), Jiangxi Normal University, Nanchang 330022, China
| | - Fei Zhang
- State-Province Joint Engineering Laboratory of Zeolite Membrane Materials, Institute of Advanced Materials (IAM), Jiangxi Normal University, Nanchang 330022, China
| | - Xiangshu Chen
- State-Province Joint Engineering Laboratory of Zeolite Membrane Materials, Institute of Advanced Materials (IAM), Jiangxi Normal University, Nanchang 330022, China
- Environmental Science and Engineering, Graduate School of Sciences and Technology for Innovation, Yamaguchi University, Ube 755-8611, Japan
| | - Hidetoshi Kita
- Environmental Science and Engineering, Graduate School of Sciences and Technology for Innovation, Yamaguchi University, Ube 755-8611, Japan
| |
Collapse
|
2
|
Chaudhari S, Yeo S, Shin H, Kim U, Jo S, Cho KY, Shon M, Nam S, Park Y. Cellulose nanofiber and halloysite nanotubes embedded polyvinyl alcohol membranes for pervaporation dehydration of epichlorohydrin–isopropanol–water ternary feed mixture. B KOREAN CHEM SOC 2022. [DOI: 10.1002/bkcs.12653] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Affiliation(s)
| | - SangJun Yeo
- Department of Industrial Chemistry Pukyong National University Busan Korea
| | - HyeonTae Shin
- Department of Industrial Chemistry Pukyong National University Busan Korea
| | - UiSeo Kim
- Department of Industrial Chemistry Pukyong National University Busan Korea
| | - Sewook Jo
- Department of Industrial Chemistry Pukyong National University Busan Korea
| | - Kie Yong Cho
- Department of Industrial Chemistry Pukyong National University Busan Korea
| | - MinYoung Shon
- Department of Industrial Chemistry Pukyong National University Busan Korea
| | - SeungEun Nam
- Center for Membranes, Korea Research, Institute of Chemical Technology Daejeon Korea
| | - YouIn Park
- Center for Membranes, Korea Research, Institute of Chemical Technology Daejeon Korea
| |
Collapse
|
3
|
Sharma V, Agrawal A, Singh O, Goyal R, Sarkar B, Gopinathan N, Gumfekar SP. A Comprehensive Review on the Synthesis Techniques of Porous Materials for Gas Separation and Catalysis. CAN J CHEM ENG 2022. [DOI: 10.1002/cjce.24507] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Vikrant Sharma
- Department of Chemical Engineering Indian Institute of Technology Ropar India
| | - Ankit Agrawal
- CSIR‐Indian Institute of Petroleum Dehradun India
- Academy of Scientific and Innovative Research (AcSIR), Gaziabad India
| | - Omvir Singh
- CSIR‐Indian Institute of Petroleum Dehradun India
- Academy of Scientific and Innovative Research (AcSIR), Gaziabad India
| | - Reena Goyal
- CSIR‐Indian Institute of Petroleum Dehradun India
- Department of Chemical Engineering Indian Institute of Technology Roorkee India
| | - Bipul Sarkar
- CSIR‐Indian Institute of Petroleum Dehradun India
| | - Navin Gopinathan
- Department of Chemical Engineering Indian Institute of Technology Ropar India
| | - Sarang P. Gumfekar
- Department of Chemical Engineering Indian Institute of Technology Ropar India
| |
Collapse
|
4
|
Jin CG, Yin MJ, Wu JK, Zhang WH, Wang N, An QF. Development of high-performance and robust membrane via ‘hard-crosslinking-soft’ technique for dehydration of acetic acid. J Memb Sci 2022. [DOI: 10.1016/j.memsci.2021.120033] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
5
|
Catalytically active membranes for esterification: A review. Chin J Chem Eng 2022. [DOI: 10.1016/j.cjche.2022.03.009] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
6
|
Shi J, Wang T, Han J, Liang Y, Tong Y, Li W. Fabrication of
MWCNT
S
‐functionalized
SA
pervaporation composite membranes to enhance esterification. J Appl Polym Sci 2021. [DOI: 10.1002/app.51573] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Affiliation(s)
- Jiayun Shi
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Taishan Wang
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Jie Han
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Yao Liang
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Yujia Tong
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| | - Weixing Li
- State Key Laboratory of Materials‐Oriented Chemical Engineering, College of Chemical Engineering Nanjing Tech University Nanjing China
| |
Collapse
|
7
|
Ugur Nigiz F. Comparative study on use of pervaporation membrane reactor for lauric acid – Methanol esterification. Sep Purif Technol 2021. [DOI: 10.1016/j.seppur.2021.118443] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
|
8
|
Wang T, Shi J, Liang Y, Han J, Tong Y, Li W. Novel SPVA/g-C 3N 4-SA/PAN Pervaporation Membranes with Porous Catalytic Layers for Esterification Enhancement. Ind Eng Chem Res 2021. [DOI: 10.1021/acs.iecr.1c00451] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
Affiliation(s)
- Taishan Wang
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Jiayun Shi
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Yao Liang
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Jie Han
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Yujia Tong
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| | - Weixing Li
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
| |
Collapse
|
9
|
Chaudhari S, Cho K, Joo S, An B, Lee S, Yun S, Lee G, Park J, Shon M, Park Y. Layer-by-layer of graphene oxide-chitosan assembly on PVA membrane surface for the pervaporation separation of water-isopropanol mixtures. KOREAN J CHEM ENG 2021. [DOI: 10.1007/s11814-020-0726-8] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
10
|
Kalahal PB, Kulkarni AS, Sajjan AM, Khan TMY, Anjum Badruddin I, Kamangar S, Banapurmath NR, Ayachit NH, Naik ML, Marakatti VS. Fabrication and Physicochemical Study of B2SA-Grafted Poly(vinyl Alcohol)-Graphene Hybrid Membranes for Dehydration of Bioethanol by Pervaporation. MEMBRANES 2021; 11:110. [PMID: 33557066 PMCID: PMC7913885 DOI: 10.3390/membranes11020110] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/26/2020] [Revised: 01/23/2021] [Accepted: 01/26/2021] [Indexed: 11/16/2022]
Abstract
Tetraethylorthosilicate (TEOS)-crosslinked poly(vinyl alcohol) (PVA) solution was prepared and treated with benzaldehyde 2 sulphonic sodium salt acid (B2SA) for sulfonation. Different contents of graphene were incorporated into B2SA-grafted PVA-TEOS hybrid membrane to improve the membrane stability, mechanical strength, and overall pervaporation performance of the membranes. Membranes were fabricated using the casting technique. Developed membranes were then analyzed for their physicochemical changes by means of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscope (SEM), wide-angle X-ray diffraction (WAXD), thermogravimetric analysis (TGA), contact angle analysis (CA), and mechanical strength. The lower d-spacing value observed in WAXD was evidence for the decreased inter-chain distance between the polymer chains. DSC exhibited the enhanced thermal stability of the developed membranes compared to the plane PVA membrane with enhancement in Tg value (106 °C), which was well above the pervaporation experimental temperature. Incorporation of graphene induced higher mechanical strength to the fabricated membranes. Further, the membranes were tested for the pervaporation separation of bioethanol. All the membranes were stable throughout the pervaporation studies, with M-2 G showing the total permeation flux of 11.66 × 10-2 kg/(m2 h) at 30 °C.
Collapse
Affiliation(s)
- Prakash B. Kalahal
- Department of Chemistry, KLE Technological University, Hubballi 580031, India; (P.B.K.); (A.S.K.); (M.L.N.)
| | - Akshay S. Kulkarni
- Department of Chemistry, KLE Technological University, Hubballi 580031, India; (P.B.K.); (A.S.K.); (M.L.N.)
| | - Ashok M. Sajjan
- Department of Chemistry, KLE Technological University, Hubballi 580031, India; (P.B.K.); (A.S.K.); (M.L.N.)
- Center for Material Science, KLE Technological University, Hubballi 580031, India; (N.R.B.); (N.H.A.)
| | - T. M. Yunus Khan
- Research Center for Advanced Materials Science (RCAMS), King Khalid University, P.O. Box 9004, Abha 61413, Saudi Arabia; (T.M.Y.K.); (I.A.B.)
- Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia;
| | - Irfan Anjum Badruddin
- Research Center for Advanced Materials Science (RCAMS), King Khalid University, P.O. Box 9004, Abha 61413, Saudi Arabia; (T.M.Y.K.); (I.A.B.)
- Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia;
| | - Sarfaraz Kamangar
- Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia;
| | - Nagaraj R. Banapurmath
- Center for Material Science, KLE Technological University, Hubballi 580031, India; (N.R.B.); (N.H.A.)
| | - Narasimha H. Ayachit
- Center for Material Science, KLE Technological University, Hubballi 580031, India; (N.R.B.); (N.H.A.)
| | - Manu L. Naik
- Department of Chemistry, KLE Technological University, Hubballi 580031, India; (P.B.K.); (A.S.K.); (M.L.N.)
| | - Vijaykumar S. Marakatti
- Institute of Condensed Matter and Nanosciences (IMCN), Molecular Chemistry, Materials and Catalysis (MOST) Université Catholique de Louvain (UCLouvain), 1348 Louvain-la-Neuve, Belgium;
| |
Collapse
|
11
|
Qing W, Liu F, Yao H, Sun S, Chen C, Zhang W. Functional catalytic membrane development: A review of catalyst coating techniques. Adv Colloid Interface Sci 2020; 282:102207. [PMID: 32688044 DOI: 10.1016/j.cis.2020.102207] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2020] [Revised: 06/02/2020] [Accepted: 07/04/2020] [Indexed: 12/18/2022]
Abstract
Catalytic membranes combine catalytic activity with conventional filtration membranes, thus enabling diverse attractive benefits into the conventional membrane filtration processes, such as easy catalyst reuse, antifouling, anti-microbial, and enhancing process efficiency. Up to date, tremendous progresses have been made on functional catalytic membrane preparation and applications, which significantly advances the competitiveness of membrane technologies in process industries. The present article provides a critical and holistic overview of the current state of knowledge on existing catalyst coating techniques for functional catalytic membrane development. Based on coating mechanisms, the techniques are generally categorized into physical and chemical surface coating routes. For each technique, we first introduce fundamental principle, followed by a critical discussion of their applications with representative case studies. Advantages and drawbacks are also emphasized for different surface coating technologies. Finally, future perspectives are highlighted to provide deep insights into their future developments.
Collapse
Affiliation(s)
- Weihua Qing
- Beijing International Science and Technology Cooperation Base for Antibiotics and Resistance Genes Control, Beijing Key Laboratory of Aqueous Typical Pollutants Control and Water Quality Safeguard, School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China; Department of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, NJ 07102, United States of America
| | - Fang Liu
- Beijing International Science and Technology Cooperation Base for Antibiotics and Resistance Genes Control, Beijing Key Laboratory of Aqueous Typical Pollutants Control and Water Quality Safeguard, School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China
| | - Hong Yao
- Beijing International Science and Technology Cooperation Base for Antibiotics and Resistance Genes Control, Beijing Key Laboratory of Aqueous Typical Pollutants Control and Water Quality Safeguard, School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China.
| | - Shaobin Sun
- Beijing International Science and Technology Cooperation Base for Antibiotics and Resistance Genes Control, Beijing Key Laboratory of Aqueous Typical Pollutants Control and Water Quality Safeguard, School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China; Department of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, NJ 07102, United States of America
| | - Chen Chen
- Department of Municipal and Environmental Engineering, Qingdao University of Technology, Qingdao 266033, China
| | - Wen Zhang
- Department of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, NJ 07102, United States of America
| |
Collapse
|
12
|
Fabrication, Properties, Performances, and Separation Application of Polymeric Pervaporation Membranes: A Review. Polymers (Basel) 2020; 12:polym12071466. [PMID: 32629862 PMCID: PMC7408584 DOI: 10.3390/polym12071466] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2020] [Revised: 06/12/2020] [Accepted: 06/28/2020] [Indexed: 11/24/2022] Open
Abstract
Membrane separation technologies have attracted great attentions in chemical engineering, food science, analytical science, and environmental science. Compared to traditional membrane separation techniques like reverse osmosis (RO), ultrafiltration (UF), electrodialysis (ED) and others, pervaporation (PV)-based membrane separation shows not only mutual advantages such as small floor area, simplicity, and flexibility, but also unique characteristics including low cost as well as high energy and separation efficiency. Recently, different polymer, ceramic and composite membranes have shown promising separation applications through the PV-based techniques. To show the importance of PV for membrane separation applications, we present recent advances in the fabrication, properties and performances of polymeric membranes for PV separation of various chemicals in petrochemical, desalination, medicine, food, environmental protection, and other industrial fields. To promote the easy understanding of readers, the preparation methods and the PV separation mechanisms of various polymer membranes are introduced and discussed in detail. This work will be helpful for developing novel functional polymer-based membranes and facile techniques to promote the applications of PV techniques in different fields.
Collapse
|