Porous Z-scheme MnO2/Mn-modified alkalinized g-C3N4 heterojunction with excellent Fenton-like photocatalytic activity for efficient degradation of pharmaceutical pollutants

Synergistic self-driven and heterogeneous effect of a biomass-derived urchin-like Mn3O4/C3N4 Janus micromotor catalyst for efficient degradation of carbamazepine

It is well known that obtaining efficient carbamazepine degradation materials or rapid carbamazepine-removal methods is still a challenge in the field of environmental remediation. Hence, the present study aimed to concurrently address these issues by combining a self-driven, heterostructured and low-cost biomass-templated urchin-like Janus micromotor catalyst for highly efficient carbamazepine degradation. The catalyst could autonomously move in a circle-like motion pattern via O2 bubbles generated from the Mn3O4-catalyzed decomposition of H2O2 with a velocity of 223.5 ± 7.0 μm s-1 in 1% H2O2. Benefiting from the well-structured heterojunction at the interface of C3N4 and Mn3O4, carbamazepine (CBZ) was degraded by 61% in 100 min under sunlight irradiation. In addition, density functional theory calculation results proved that the formation of the heterojunction structure promoted the generation of photo-generated carriers. Thus, the presented method provides a promising pathway for the rational construction and preparation of movable catalysts for the efficient removal of organic pollutants from wastewater.

Synthesis of X@DRHC (X=Co, Ni, Mn) catalyst from comprehensive utilization of waste rice husk and spent lithium-ion batteries for efficient peroxymonosulfate (PMS) activation

Highly efficient resource recycling and comprehensive utilization play a crucial role in achieving the goal of reducing resource wasting, environmental protection, and achieving goal of sustainable development. In this work, the two kinds waste resources of agricultural rice husk and metal ions (Co, Ni, and Mn) from spent lithium-ion batteries have been skillfully utilized to synthesize novel Fenton-like catalysts. Desiliconized rice husk carbon (DRHC) with rich pore structure and large specific surface area from rice husk has been prepared and used as scalable carrier, and dandelion-like nanoparticles cluster could be grown in situ on the surface of the carrier by using metal ions contained waste water. The designed catalysts (X@DRHC) as well as their preparation process were characterized in detail by SEM, TEM, BET, XRD and XPS, respectively. Meanwhile, their catalytic abilities were also studied by activating potassium peroxomonosulfate (PMS) to remove methylene blue (MB). The results indicate X@DRHC displays excellent degradation efficiency on MB with wide pH range and stable reusability, which is suitable for the degradation of various dyes. This work has realized the recycling and high-value utilization of waste resources from biomass and spent lithium-ion batteries, which not only creates an efficient way to dispose waste resources, but also shows high economic benefits in large-scale water treatment.

Z-Type Heterojunction MnO2@g-C3N4 Photocatalyst-Activated Peroxymonosulfate for the Removal of Tetracycline Hydrochloride in Water

A Z-type heterojunction MnO2@g-C3N4 photocatalyst with excellent performance was synthesized by an easy high-temperature thermal polymerization approach and combined with peroxymonosulfate (PMS) oxidation technology for highly efficient degrading of tetracycline hydrochloride (TC). Analysis of the morphological structural and photoelectric properties of the catalysts was achieved through different characterization approaches, showing that the addition of MnO2 heightened visible light absorption by g-C3N4. The Mn1-CN1/PMS system showed the best degradation of TC wastewater, with a TC degradation efficiency of 96.97% following 180 min of treatment. This was an approximate 38.65% increase over the g-C3N4/PMS system. Additionally, the Mn1-CN1 catalyst exhibited excellent stability and reusability. The active species trapping experiment indicated •OH and SO4•- remained the primary active species to degrade TC in the combined system. TC degradation pathways and intermediate products were determined. The Three-Dimensional Excitation-Emission Matrix (3DEEM) was employed for analyzing changes in the molecular structure in TC photocatalytic degradation. The biological toxicity of TC and its degradation intermediates were investigated via the Toxicity Estimation Software Test (T.E.S.T.). The research offers fresh thinking for water environment pollution treatment.

Removal of Microcystis aeruginosa by manganese activated sodium percarbonate: Performance and role of the in-situ formed MnO2

Previous studies have found that pre-oxidation of manganese salts such as potassium permanganate and potassium manganate can remove algae in water, while existing problems such as excessive oxidation and appearance of chromaticity. In this study, our objective was to induce a Fenton-like reaction by activating sodium percarbonate (SPC) with divalent manganese (Mn(II)) to pre-oxidize algae-contaminated water. The optimal dosage of Mn(II)/SPC was determined by assessing the zeta potential of the algae and the residual Mn(II) in the solution. Moreover, we conducted a characterization of the cells post-reaction and assessed the levels of dissolved organic carbon (DOC). The disinfection by-products (DBPs) (sodium hypochlorite disinfection)of the algae-containing water subsequent to Mn(II)/SPC treatment were measured. Experiments show that Mn(II)/SPC pre-oxidation at optimal dosage acquired 88% removal of algae and less damage to the cell membrane. Moreover, the Mn(II) acted not only as a catalyst but also formed MnO2 which adsorbed onto the cell surface and facilitated sedimentation. Furthermore, this technology exhibits the capability to effectively manage algal organic matters present in water, thereby mitigating the formation of nitrogen-containing DBPs. These results highlight the potential of Mn(II)/SPC treatment for treating water contaminated with algae, thus ensuring the safety and quality of water resources.

Unleashing the Full Potential of Photo-Driven CO Hydrogenation to Light Olefins over Carbon-Coated CoMn-Based Catalysts

As a nonpetroleum process, photodriven Fischer-Tropsch synthesis provides a practical approach for the synthesis of light olefins. However, maximizing the solar-energy conversion efficiency based on the design of the composite catalyst and understanding the catalytic mechanism remain challenging. Herein, a novel carbon-coated CoMn-based catalyst, a C-coated mixture of Co and MnO, is designed for the efficient conversion of syngas to light olefins under light irradiation. The CoMnC-450 catalyst exhibits a CO conversion of 12.6% with a selectivity to light olefins of 36.5% under light irradiation, showing 5.5-fold the activity of thermocatalysis. Experimental characterizations as certain the CoMnC-450 catalyst can be excited to generate photogenerated carriers under light irradiation and then the electron transfer to metallic Co to form electron-rich active sites with carbon mediation, thereby enhancing the catalytic performance. In situ Fourier transform infrared spectroscopy and theoretical calculation based on density functional theory reveal the unique roles of photogenerated carriers in promoting the adsorption and activation of CO molecules. This study demonstrates a feasible catalyst model to efficiently utilize full-spectral solar light to produce the value-added chemical.

Controllable Anchoring of Graphitic Carbon Nitride on MnO2 Nanoarchitectures for Oxygen Evolution Electrocatalysis

The design and fabrication of eco-friendly and cost-effective (photo)electrocatalysts for the oxygen evolution reaction (OER) is a key research goal for a proper management of water splitting to address the global energy crisis. In this work, we focus on the preparation of supported MnO2/graphitic carbon nitride (g-CN) OER (photo)electrocatalysts by means of a novel preparation strategy. The proposed route consists of the plasma enhanced-chemical vapor deposition (PE-CVD) of MnO2 nanoarchitectures on porous Ni scaffolds, the anchoring of controllable g-CN amounts by an amenable electrophoretic deposition (EPD) process, and the ultimate thermal treatment in air. The inherent method versatility and flexibility afforded defective MnO2/g-CN nanoarchitectures, featuring a g-CN content and nano-organization tunable as a function of EPD duration and the used carbon nitride precursor. Such a modulation had a direct influence on OER functional performances, which, for the best composite system, corresponded to an overpotential of 430 mV at 10 mA/cm2, a Tafel slope of ≈70 mV/dec, and a turnover frequency of 6.52 × 10-3 s-1, accompanied by a very good time stability. The present outcomes, comparing favorably with previous results on analogous systems, were rationalized on the basis of the formation of type-II MnO2/g-CN heterojunctions, and yield valuable insights into this class of green (photo)electrocatalysts for end uses in solar-to-fuel conversion and water treatment.

Photo-assisted degradation of Rhodamine B by a heterogeneous Fenton-like process: performance and kinetics

This study presents the degradation of rhodamine B (RhB) by photo Fenton-like (PF-like) process under visible light irradiation (λ > 380 nm) using cobalt phosphate microparticles (CoP-MPs). The effects of the initial concentration of RhB, pH value, CoP-MPs dosage, hydrogen peroxide (H2O2) concentration, and salts found in textile wastewater (such as NaNO3, Na2SO4, and NaCl) were investigated in detail. It was found that CoP-MPs can maintain high catalytic activity with wide pH values varying from 4 to 8. This indicated that the use of CoP-MPs overcame the low efficiency of Fenton-like reaction at neutral and even weakly alkaline pH. The PF-like degradation of RhB followed pseudo-first order kinetics in various conditions. Moreover, a comparison of experimental results showed that the PF-like system has good degradation ability for RhB and methyl blue (MB) solution, but is poor for methyl orange (MO) solution. The repeat experiments indicated that the chemical structures of CoP-MPs were stable. Furthermore, the Co2+ ions leaching to the solutions were measured by an inductively coupled plasma mass spectrometer (ICP-MS). Analysis of UV-vis spectra suggested that RhB was degraded by the formation of a series of N-de-ethylated intermediates followed by cleavage of the whole conjugate chromophore structure.HighlightsRhB can be effectively degraded in the PF-like process under visible light irradiation by CoP-MPs.The PF-like process can maintain high catalytic activity at neutral and even weakly alkaline pH.Degradation kinetics exhibited pseudo-first-order kinetics and were influenced by the key parameters.The variation in the UV-vis spectra of RhB was analyzed in detail to infer a possible degradation pathway.

Advancements in the Application of the Fenton Reaction in the Cancer Microenvironment

Cancer is a complex and multifaceted disease that continues to be a global health challenge. It exerts a tremendous burden on individuals, families, healthcare systems, and society as a whole. To mitigate the impact of cancer, concerted efforts and collaboration on a global scale are essential. This includes strengthening preventive measures, promoting early detection, and advancing effective treatment strategies. In the field of cancer treatment, researchers and clinicians are constantly seeking new approaches and technologies to improve therapeutic outcomes and minimize adverse effects. One promising avenue of investigation is the utilization of the Fenton reaction, a chemical process that involves the generation of highly reactive hydroxyl radicals (·OH) through the interaction of hydrogen peroxide (H2O2) with ferrous ions (Fe2+). The generated ·OH radicals possess strong oxidative properties, which can lead to the selective destruction of cancer cells. In recent years, researchers have successfully introduced the Fenton reaction into the cancer microenvironment through the application of nanotechnology, such as polymer nanoparticles and light-responsive nanoparticles. This article reviews the progress of the application of the Fenton reaction, catalyzed by polymer nanoparticles and light-responsive nanoparticles, in the cancer microenvironment, as well as the potential applications and future development directions of the Fenton reaction in the field of tumor treatment.

Enhanced photocatalytic and antibacterial activities of novel Ag-HA bioceramic nanocatalyst for waste-water treatment

Hydroxyapatite (HA), the most common bioceramic material, offers attractive properties as a catalyst support. Highly crystalline mono-dispersed silver doped hydroxyapatite (Ag-HA) nanorods of 60 nm length was developed via hydrothermal processing. Silver dopant offered enhanced chemisorption for crystal violet (CV) contaminant. Silver was found to intensify negative charge on the catalyst surface; in this regard enhanced chemisorption of positively charged contaminants was accomplished. Silver dopant experienced decrease in the binding energy of valence electron for oxygen, calcium, and phosphorous using X-ray photoelectron spectroscopy XPS/ESCA; this finding could promote electron-hole generation and light absorption. Removal efficiency of Ag-HA nanocomposite for CV reached 88% after the synergistic effect with 1.0 mM H2O2; silver dopant could initiate H2O2 cleavage and intensify the release of active ȮH radicals. Whereas HA suffers from lack of microbial resistance; Ag-HA nanocomposite demonstrated high activity against Gram-positive (S. aureus) bacteria with zone of inhibition (ZOI) mm value of 18.0 mm, and high biofilm inhibition of 91.1%. Ag-HA nanocompsite experienced distinctive characerisitcs for utilization as green bioceramic photocatalyst for wastewater treatment.

Rational design of α-MnO2/HT-GCN nanocomposite for effective photocatalytic degradation of ciprofloxacin and pernicious activity

The present study is mainly concerned with the development of cost-efficient composite material utilized to produce one-dimensional manganese oxide (α-MnO2) nanoparticles coated on two-dimensional graphitic carbon nitrides (HT-GCN) as nanocomposite (α-MnO2/HT-GCN) for highly efficient CIP degradation. The α-MnO2 nanoparticles (NPs) were prepared by a simple hydrothermal technique before being decorated on HT-GCN (H denotes protonation and T represents thermal-decomposition-graphitic carbon nitride). Tauc plots were used to calculate the band gap values of the photocatalysts α-MnO2 (1.74 eV), GCN (2.84 eV), HT-GCN (2.63 eV), and α-MnO2/HT-GCN (2.31 eV). The mechanism was investigated by various scavengers, particularly isopropanol (•OH) makes a significant role in the photodegradation process. The degradation percentage for ciprofloxacin was 89.2% and the rate of reaction R2 = 0.9913. This study demonstrates a unique method for developing a heterojunction-based nanocomposite of α-MnO2/HT-GCN, which exhibit better light absorption performance.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Removal of tetracycline from wastewater using g-C3N4 based photocatalysts: A review

Tetracycline is currently one of the most consumed antibiotics for human therapy, veterinary purpose, and agricultural activities. Tetracycline worldwide consumption is expected to rise by about more than 30% by 2030. The persistence of tetracycline has necessitated implementing and adopting strategies to protect aquatic systems and the environment from noxious pollutants. Here, graphitic carbon nitride-based photocatalytic technology is considered because of higher visible light photocatalytic activity, low cost, and non-toxicity. Thus, this review highlights the recent progress in the photocatalytic degradation of tetracycline using g-C₃N₄-based photocatalysts. Additionally, properties, worldwide consumption, occurrence, and environmental impacts of tetracycline are comprehensively addressed. Studies proved the occurrence of tetracycline in all water matrices across the world with a maximum concentration of 54 μg/L. Among different g-C₃N₄-based materials, heterojunctions exhibited the maximum photocatalytic degradation of 100% with the reusability of 5 cycles. The photocatalytic membranes are found to be feasible due to easiness in recovery and better reusability. Limitations of g-C₃N₄-based wastewater treatment technology and efficient solutions are also emphasized in detail.

N-Doped TiO2 Coupled with Manganese-Substituted Phosphomolybdic Acid Composites As Efficient Photocatalysis-Fenton Catalysts for the Degradation of Rhodamine B

The effectiveness of photocatalytic and Fenton reactions in the synergistic treatment of water pollution problems has become indisputable. In this paper, nitrogen-doped TiO₂ was selected as the catalyst for the photocatalytic reaction and manganese-substituted phosphomolybdic acid was used as the Fenton reagent, the two of which were combined together by acid impregnation to construct a binary photocatalysis-Fenton composite catalyst. The degradation experiments of the composite catalyst on RhB indicated that under UV-vis irradiation, the composite catalyst could degrade RhB almost completely within 8 min, and the degradation rate was 19.7 times higher than that of N-TiO₂, exhibiting a superior degradation ability. Simultaneously, a series of characterization methods were employed to analyze the structure, morphology, and optical properties of the catalysts. The results demonstrated that the nitrogen doping not only expanded the photo response range of TiO₂ but reduced the work function of TiO₂, which facilitated the transfer of electrons to the loaded Mn-HPMo side and further promoted the electron-hole separation efficiency. In addition, the introduction of Mn-HPMo provided three pathways for the activation of hydrogen peroxide, which enhanced the degradation activity. This study provides novel insights into the construction of binary and efficient catalysts with multiple hydroxyl radical generation pathways.

Electrospun composite nanofibers as novel high-performance and visible-light photocatalysts for removal of environmental pollutants: A review

Environmental pollution caused by industries and human manipulations is coming a serious global challenge. On the other hand, the world is facing an energy crisis caused by population growth. Designing solar-driven photocatalysts which are inspired by the photosynthesis of plant leaves is a fantastic solution to use solar energy as green, available, and unlimited energy containing ∼50% visible light for the removal of environmental pollutants. The polymeric and non-polymeric-based electrospun composite nanofibers (NFs) are as innovative photocatalytic candidates which increase photocatalytic activity and transition from UV light to visible light and overcome the aggregation, photocorrosion, toxicity, and hard recycling and separation of the nanosized powder form of photocatalysts. The composite NFs are fabricated easily by either embedding the photocatalytic agents into the NFs during electrospinning or via their decorating on the surface of NFs post-electrospinning. Polyacrylonitrile-based, tungsten trioxide-based, zinc oxide-based, and titanium dioxide-based composite NFs were revealed as the most reported composite NFs. All the lately investigated electrospun composite NFs indicated long-term stability, high photocatalytic efficiency (∼> 80%) within a short time of light radiation (10-430 min), and high stability after several cycles of use. They were applied in various applications including degradation of dyes/antibiotics, water splitting, wastewater treatment, antibacterial usage, etc. The photogenerated species especially holes, O₂^∙-, and ^.OH were mostly responsible for the photocatalytic mechanism and pathway. The electrospun composite NFs have the potential to use in large-scale productions in condition that their thickness and recycling conditions are optimized, and their toxicity and detaching are resolved.

Nanomaterials for Photocatalytic Degradations of Analgesic, Mucolytic and Anti-Biotic/Viral/Inflammatory Drugs Widely Used in Controlling SARS-CoV-2

The COVID-19 pandemic has been transformed into one of the main worldwide challenges, in recent years. For controlling symptoms that are caused by this disease (e.g., chills or fever, shortness of breath and/or difficulty in breathing, cough, sore throat, fatigue, headache, muscle aches, the new loss of tastes and/or smells, congestion or runny nose, nausea, vomiting and/or diarrhea), lots of medicines including analgesics, mucolytics, and anti-biotic/viral/inflammatory drugs have been frequently prescribed. As these medicines finally contaminate terrestrial and aquatic habitats by entering surface waterways through pharmaceutical production and excreting trace amounts of waste after human usage, they have negative impacts on wildlife’s health and ecosystem. Residual drugs in water have the potential to harm aquatic creatures and disrupt their food chain as well as the breeding cycle. Therefore, proper degradation of these broadly used medicines is highly crucial. In this work, the use of nanomaterials applicable in photocatalytic degradations of analgesics (e.g., acetaminophen, aspirin, ibuprofen, and naproxen), mucolytics (e.g., ambroxol), antibiotics (e.g., azithromycin and quinolones including hydroxychloroquine and chloroquine phosphate), anti-inflammatory glucocorticoids (e.g., dexamethasone and cortisone acetate), antihistamines (e.g., diphenhydramine), H2 blockers (e.g., famotidine), anthelmintics (e.g., praziquantel), and finally antivirals (e.g., ivermectin, acyclovir, lopinavir/ritonavir, favipiravir, nitazoxanide, and remdesivir) which widely used in controlling/treating the coronavirus have been reviewed and discussed.

Generation of singlet oxygen over CeO2/K, Na-codoped g-C3N4 for tetracycline hydrochloride degradation in a wide pH range

Singlet oxygen (1O2) were widely studied for catalytic oxidation and photo dynamic therapy (PDT) and so on due to its unique properties, such as its long lifetime, wide pH tolerance,...

Fabrication of Mn/P co-doped hollow tubular carbon nitride by a one-step hydrothermal–calcination method for the photocatalytic degradation of organic pollutants

Efficient photocatalytic degradation of trace organic pollutants in aqueous environment by a hollow tubular carbon nitride co-doped with manganese and phosphorus under visible light.

Low Temperature Combustion of VOCs with Enhanced Catalytic Activity Over MnO2 Nanotubes Loaded with Pt and Ni-Fe Spinel

MnO₂ nanotubes loaded with Pt and Ni-Fe spinel were synthesized using simple hydrothermal and sol-gel techniques. After loading with Ni-Fe spinel, the specific surface area of the material increases 3-fold. This change helped to provide more active sites and facilitated the association between the catalyst and volatile organic compounds (VOCs). X-ray photoelectron spectroscopy determined that the adsorbed oxygen concentrations were all greatly increased after Pt loading, indicating that Pt promoted the adsorption of oxygen and so accelerated the combustion process. The performance of the catalyst after loading with 2 wt % Pt was greatly improved, such that the T₉₀ for benzene decomposition was decreased to 113 °C. In addition, the 2% Pt/2Mn@NFO exhibited excellent low-temperature catalytic activity when reacting with low concentrations of toluene and ethyl acetate. This work therefore demonstrates a viable new approach to the development of Mn-based catalysts for the low temperature catalytic remediation of VOCs.

Effective treatment of hospital wastewater with high-concentration diclofenac and ibuprofen using a promising technology based on degradation reaction catalyzed by Fe0 under microwave irradiation

Real hospital wastewater was effectively treated by a promising technology based on degradation reaction catalyzed by Fe⁰ under microwave irradiation in this work. Fe⁰ powders were synthesized and characterized by different techniques, resulting in a single-phase sample with spherical particles. Optimum experimental conditions were determined by a central composite rotatable design combined with a response surface methodology, resulting in 96.8% of chemical oxygen demand reduction and 100% organic carbon removal, after applying MW power of 780 W and Fe⁰ dosage of 0.36 g L^-1 for 60 min. Amongst the several organic compounds identified in the wastewater sample, diclofenac and ibuprofen were present in higher concentrations; therefore, they were set as target pollutants. Both compounds were completely degraded in 35 min of reaction time. Their plausible degradation pathways were investigated and proposed. Overall, the method developed in this work effectively removed high concentrations of pharmaceuticals in hospital wastewater.

Enhanced 4-FP removal with MnFe2O4 catalysts under dielectric barrier discharge plasma: Economical synthesis, catalytic performance and degradation mechanism

The dielectric barrier discharge plasma (DBDP) process has received extensive attention for the removal of organic contaminants from water. A novel microwave-assisted hydrothermal method was used to easily and rapidly synthesize MnFe₂O₄ catalysts. Based on the DBDP process, MnFe₂O₄ can enhance 4-fluorophenol (4-FP) abatement from 44.15% to 58.78% through the catalysis within 18 min. Then, the adjunction of O₃ generated by discharge can further boost 4-FP degradation to 94.94%. After the whole optimization process is complete, the associated pseudo-first-order reaction kinetic constant and energy efficiency were enhanced from 0.0327 to 0.1536 min^-1 and 2067.13 mg kW h^-1 to 4444.75 mg kW h^-1, respectively. With the help of the condition, blank and radical capture experiments, the catalytic performance caused by MnFe₂O₄ and O₃ was attributed to the joint action of Fenton-like reactions, photocatalysis (ultraviolet, UV), photoassisted Fenton reactions and O₃ catalysis. The overall downward trend of the possible intermediate toxicities indicated that the DBDP/MnFe₂O₄/O₃ process can effectively remove and mineralize 4-FP without the generation of more toxic intermediates. In addition, during the 5 cycles, MnFe₂O₄ can maintain excellent recovery, efficiency and durability. In summary, the coupling of discharge plasma and MnFe₂O₄ sheds new light on catalysis for wastewater treatment.

Gold nanoparticles-modified MnFe2O4 with synergistic catalysis for photo-Fenton degradation of tetracycline under neutral pH

To decrease the adverse environmental and health-related effects of antibiotics, a series of MnFe₂O₄-Au (MFO-Au) composites were prepared by simple co-precipitation and photoreduction methods for efficient photo-Fenton degradation of tetracycline (TC). The synergistic effect of MFO and gold nanoparticles (AuNPs) with high absorption of visible light and strong photogenerated carrier separation efficiency endowed MFO-Au₃ an outstanding photo-Fenton catalytic performance for TC degradation in neutral condition. The surface hydroxyl of MFO profited to generation of •OH, and negative charged or partially polarized AuNPs benefited to adsorption of H₂O₂, which had a synergistic effect on enhancing the photo-Fenton catalytic performance of MFO-Au. 88.3% of TC was efficiently removed and about 51.9% of TOC decreased within 90 min. The electron spin resonance and quenching tests suggested that h⁺ and e^- were responsible for the high catalytic degradation and •OH and •O₂^- participated in the photo-Fenton reaction. The toxicity assessment by seed germination experiments showed efficient toxicity reduction of this system. Besides, MFO-Au exhibited high stability, good cycle, relatively economical and practical application performance, which is expected to provide potential guidance for the design and combination of noble nanoparticles with high stability and spinel bimetallic oxides with high catalytic activity in photo-Fenton reactions.

Development of a novel graphitic carbon nitride and multiwall carbon nanotube co-doped Ti/PbO2 anode for electrocatalytic degradation of acetaminophen

In this work, we have constructed a novel graphitic carbon nitride/multiwall carbon nanotube (GCN/CNT) doped Ti/PbO₂ as anode for highly effective degradation of acetaminophen (ACE) wastewater. The ACE removal efficiency of 83.2% and chemical oxygen demand removal efficiency of 76.3% are achieved under the optimal condition of temperature 25 °C, initial pH 7, current density 15 mA cm^-2 and Na₂SO₄ concentration 6.0 g L^-1. The excellent electrocatalytic activity of Ti/PbO₂-GCN-CNT anode for ACE oxidation is ascribed to the effective suppression of oxygen evolution and the enhanced electron transfer after introducing GCN and CNT. Furthermore, Ti/PbO₂-GCN-CNT electrode displays excellent stability and reusability. ACE degradation is accomplished by direct oxidation and indirect oxidation, and ∙OH radical plays primary role in the indirect oxidation of ACE wastewater. The intermediates of ACE degradation are detailly investigated using LC-MS analysis and a possible degradation mechanism is proposed.

Carbon nitride-based photocatalysts for the mitigation of water pollution engendered by pharmaceutical compounds

In recent decades, the destructive impact of active pharmaceutical ingredients (API) present in surface and drinking water on aquatic and terrestrial life forms becomes a major concern of researchers. API like diclofenac (DCF), carbamazepine (CBZ), tetracycline (TC), and sulfamethoxazole (SME) found in water bodies cause antimicrobial resistance and are potent carcinogens and endocrine disruptors. Conventional wastewater treatment methods possess some drawbacks and were found to be insufficient for the effective removal of APIs. Visible light-assisted semiconductor photocatalysis has become an alternative choice for tackling this worse scenario. Graphitic carbon nitride, a metal-free visible light active semiconductor photocatalyst is an emerging hotspot nanomaterial whose practical utility in water purification is widely recognized. This review comes up with an insightful outlook on the panorama of recent progress in the field of g-C₃N₄-assisted photocatalytic systems for the eradication of APIs. In addition, the review summarizes various strategies adopted for the broad-spectrum utilization of visible light and the enhancement of charge separation of pristine g-C₃N₄. The mechanistic pathways followed by different pharmaceuticals during their photocatalytic degradation process were also briefly discussed.

Heterogeneous Photo-Fenton Catalytic Degradation of Practical Pharmaceutical Wastewater by Modified Attapulgite Supported Multi-Metal Oxides

Chemical synthetic pharmaceutical wastewater has characteristics of high concentration, high toxicity and poor biodegradability, so it is difficult to directly biodegrade. We used acid modified attapulgite (ATP) supported Fe-Mn-Cu polymetallic oxide as catalyst for multi-phase Fenton-like ultraviolet photocatalytic oxidation (photo-Fenton) treatment with actual chemical synthetic pharmaceutical wastewater as the treatment object. The results showed that at the initial pH of 2.0, light distance of 20 cm, and catalyst dosage and hydrogen peroxide concentration of 10.0 g/L and 0.5 mol/L respectively, the COD removal rate of wastewater reached 65% and BOD5/COD increased to 0.387 when the reaction lasted for 180 min. The results of gas chromatography-mass spectrometry (GC-MS) indicated that Fenton-like reaction with Fe-Mn-Cu@ATP had good catalytic potential and significant synergistic effect, and could remove almost all heterocycle compounds well. 3D-EEM (3D electron microscope) fluorescence spectra showed that the fluorescence intensity decreased significantly during catalytic degradation, and the UV humus-like and fulvic acid were effectively removed. The degradation efficiency of the nanocomposite only decreased by 5.8% after repeated use for 6 cycles. It seems appropriate to use this process as a pre-treatment for actual pharmaceutical wastewater to facilitate further biological treatment.

Graphitic Carbon Nitride-Based Composite in Advanced Oxidation Processes for Aqueous Organic Pollutants Removal: A Review

In recent decades, a growing number of organic pollutants released have raised worldwide concern. Graphitic carbon nitride (g-C3N4) has drawn increasing attention in environmental pollutants removal thanks to its unique electronic band structure and excellent physicochemical stability. This paper reviews the recent progress of g-C3N4-based composites as catalysts in various advanced oxidation processes (AOPs), including chemical, photochemical, and electrochemical AOPs. Strategies for enhancing catalytic performance such as element-doping, nanostructure design, and heterojunction construction are summarized in detail. The catalytic degradation mechanisms are also discussed briefly.

Peroxymonosulfate-enhanced photocatalysis by carbonyl-modified g-C3N4 for effective degradation of the tetracycline hydrochloride

In this work, carbonyl-modified g-C₃N₄ (CO-C₃N₄) is prepared through one-step calcination of the melamine-oxalic acid aggregates. The visible light-assisted photocatalytic degradation efficiency of the tetracycline hydrochloride (TCH) for CO-C₃N₄ is significantly enhanced by introducing the peroxymonosulfate (PMS), and the apparent rate constant is greatly increased from 0.01966 min^-1 in CO-C₃N₄/vis system to 0.07688 min^-1 in CO-C₃N₄/PMS/vis system. It is found that carbonyl for CO-C₃N₄ might offer possible reactive sites for PMS activation and collection sites of photo-generated electrons, greatly accelerating carrier's separation for PMS activation. The favorable conditions, such as the higher catalyst dosage, higher PMS amount and alkaline pH, contribute to TCH degradation. The deleterious effects of co-existing anions on the TCH degradation efficiency are ranked in a decline: H₂PO₄^- > SO₄^2- > HCO₃^- > NO₃^- > Cl^-, and it may be affected by the type and amounts of anions and active radicals generated. The radical trapping tests and electron spin resonance (ESR) detection display that the O₂^-, h⁺, ¹O₂, OH and SO₄^- all contribute to TCH degradation. Meanwhile, possible degradation mechanism, intermediates and degradation pathway of TCH are revealed in CO-C₃N₄/PMS/vis system. This study will offer a new insight for constructing PMS activation with carbonyl modified g-C₃N₄ photocatalysis system to achieve effective treatment of organic wastewater.