Activation of peroxymonosulfate by metal oxide nanoparticles for mitigating organic membrane fouling in surface water treatment

Comparative study of UV/chlorine and VUV/chlorine as ultrafiltration membrane pretreatment techniques: Performance, mechanisms and DBPs formation

Membrane fouling, primarily resulting from natural organic matter (NOM) widely existing in water sources, has always been a chief hindrance for the prevalent application of ultrafiltration (UF). Thus, vacuum ultraviolet (VUV)/chlorine process was proposed as a strategy for UF membrane fouling control and ultraviolet (UV)/chlorine process was used for comparison. VUV/chlorine process exhibited more excellent performance on NOM removal than UV/chlorine process. [HO•]ss and [Cl•]ss were calculated as 1.26 × 10-13 and 3.06 × 10-14 M, respectively, and ClO• might not exist under the conditions of 0.08 mM chlorine and 30 min VUV irradiation. [HO•]ss, [Cl•]ss and [ClO•]ss were not available and the formation of reactive radicals was unsustainable in UV/chlorine system. Moreover, VUV/chlorine pretreatment also showed better performance on the reversible and irreversible membrane fouling control than UV/chlorine pretreatment. The dominated fouling mechanism in the final stage of filtration was cake filtration. Additionally, the amount of detected disinfection by-products (DBPs) in VUV/chlorine system was significantly lower than that in UV/chlorine system. During subsequent chlorination disinfection, the yield of DBPs with VUV/chorine pretreatment was higher than that with UV/chlorine pretreatment. VUV/chlorine pretreatment could effectively control DBPs formation when the pretreatment time was extended to 120 min. In summary, VUV/chlorine system presented a most excellent performance on membrane fouling control, NOM degradation and DBPs control.

Cobalt oxide functionalized ceramic membrane for 4-hydroxybenzoic acid degradation via peroxymonosulfate activation

Membrane separation and sulfate radicals-based advanced oxidation processes (SR-AOPs) can be combined as an efficient technique for the elimination of organic pollutants. The immobilization of metal oxide catalysts on ceramic membranes can enrich the membrane separation technology with catalytic oxidation avoiding recovering suspended catalysts. Herein, nanostructured Co₃O₄ ceramic catalytic membranes with different Co loadings were fabricated via a simple ball-milling and calcination process. Uniform distribution of Co₃O₄ nanoparticles in the membrane provided sufficient active sites for catalytic oxidation of 4-hydroxybenzoic acid (HBA). Mechanistic studies were conducted to determine the reactive radicals and showed that both SO₄^•- and ^•OH were present in the catalytic process while SO₄^•- plays the dominant role. The anti-fouling performance of the composite Co@Al₂O₃ membranes was also evaluated, showing that a great flux recovery was achieved with the addition of PMS for the fouling caused by humic acid (HA).

Honeycomb-like holey Co3O4 membrane triggered peroxymonosulfate activation for rapid degradation of organic contaminants

Heterogeneous advanced oxidation processes (AOPs) are commonly employed for the degradation of recalcitrant contaminants, however, practical application of heterogeneous AOPs has been limited by their low activation efficiency and inefficient utilization of radicals. Herein, this study demonstrates for the first time that 2D honeycomb-like holey membranes assembled by Co₃O₄ nanosheets, serve as an excellent activator for peroxymonosulfate (PMS) and aid in rapid pollutant removal. The Co₃O₄ membrane achieved 100% target pollutant ranitidine removal and a membrane retention time of only ~385 ms with the degradation rate 3-5 orders of magnitude faster than that achieved by conventional heterogeneous catalysis. Ranitidine degradation was maintained at >90% for 13 h of continuous-flow operation at a high flux of 176 L m^-2 h^-1 bar^-1. Furthermore, the Co₃O₄ membrane could also effectively degrade several recalcitrant pollutants, including pharmaceutical personal care products, phenols, and dyes. SO₄^•- and •OH were identified as the primary reactive oxygen species in the Co₃O₄ membrane/PMS system, with Co providing the active site for PMS activation. This strategy of membrane-based AOP treatment offers helpful guidance for the design of other efficient heterogeneous catalytic systems and presents a novel approach to overcoming the limitations of conventional heterogeneous catalysis.

The synergistic effect of PMS activation by LaCoO3/g-C3N4 for degradation of tetracycline hydrochloride: performance, mechanism and phytotoxicity evaluation

A LaCoO3/g-C3N4 catalyst with high stability was designed and used for PMS activation to degrade TC.

Fabrication of Co3O4-Bi2O3-Ti catalytic membrane for efficient degradation of organic pollutants in water by peroxymonosulfate activation

In this study, a functionalized Co₃O₄-Bi₂O₃-Ti catalytic membrane (CBO-Ti-M) was prepared and applied for removing organic pollutants via activating peroxymonosulfate (PMS) in the dead-end filtration mode. Characterizations including scanning electron microcopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the Co₃O₄-Bi₂O₃ catalyst was successfully supported on the Ti membrane. The CBO-Ti-M /PMS system could efficiently remove various organic pollutants such as sulfamethoxazole, methyl orange, bisphenol A and methylene blue, achieving removal efficiencies of 98.0%-99.5%. The effects of PMS concentration, flow rate and solution environment on degradation efficiency were investigated in detail. Furthermore, quenching experiments, electron spin resonance (ESR) and in-situ open circuit potential (OCP) tests collectively demonstrated that singlet oxygen as well as the non-radical electron transfer pathway mainly contributed in the reaction mechanism. The synergistic effect of Co and Bi was illustrated according to XPS results, and the possible degradation pathway of MB was proposed based on LC-MS analysis. Reusability test showed that pollutant removal efficiency with the CBO-Ti-M /PMS system remained stable in four runs and limited metal leaching was observed.

Recent developments in porous ceramic membranes for wastewater treatment and desalination: A review

The development of membrane technology has proved vital in providing a sustainable and affordable supply of clean water to address the ever-increasing demand. Though liquid separation applications have been still dominated by polymeric membranes, porous ceramic membranes have gained a commercial foothold in microfiltration (MF) and ultrafiltration (UF) applications due to their hydrophilic nature, lower fouling, ease of cleaning, reliable performance, robust performance with harsh feeds, relative insensitivity to temperature and pH, and stable long-term flux. The enrichment of research and development on porous ceramic membranes extends its focus into advanced membrane separation technologies. The latest emerging nanofiltration (NF) and membrane distillation (MD) applications have witnessed special interests in constructing porous membrane with hydrophilic/functional/hydrophobic properties. However, NF and MD are relatively new, and many shortcomings must be addressed to compete with their polymeric counterparts. For the last three years (2018-2020), state-of-the-art literature on porous ceramic membranes has been collected and critically reviewed. This review highlights the efficiency (permeability, selectivity, and antifouling) of hydrophilic porous ceramic membranes in a wide variety of wastewater treatment applications and hydrophobic porous ceramic membranes in membrane distillation-based desalination applications. A significant focus on pores characteristics, pore sieving phenomenon, nano functionalization, and synergic effect on fouling, the hydrophilic porous ceramic membrane has been discussed. In another part of this review, the role of surface hydrophobicity, water contact angle, liquid entry pressure (LEP), thermal properties, surface micro-roughness, etc., has been discussed for different types of hydrophobic porous ceramic membranes -(a) metal-based, (b) silica-based, (c) other ceramics. Also, this review highlights the potential benefits, drawbacks, and limitations of the porous membrane in applications. Moreover, the prospects are emphasized to overcome the challenges in the field.

Electrochemical advanced oxidation processes coupled with membrane filtration for degrading antibiotic residues: A review on its potential applications, advances, and challenges

Antibiotic pollution is mainly caused by aquaculture wastewater and pharmaceuticals, which are frequently used by humans. Due to limited treatment efficiency or improper selection of treatment methods, these antibiotic residues may be very harmful in human drinking water and aquatic environments. The EAOPs coupling membrane technology (EAOPs-membrane) can play their own advantages, which can significantly improve the degradation efficiency and alleviate membrane pollution (electrochemical manners). In this context, this review mainly collecting researches and information on EAOPs-membrane treatment of antibiotic pollution published between 2012 and 2020. Discussed the different combinations of these two technologies, the mechanism of them in the system to improve the processing efficiency, prolong the working time, and stabilize the system structure. Mainly due to the synergistic effect of electrochemical behavior such as electric repulsion and in-situ oxidation, the membrane fouling in the system is alleviated. In this review it was summarized that the selection of different membrane electrode materials and their modifications. The paper also elaborates the existing challenges facing the EAOPs-membrane methods for antibiotic pollution treatment, and their prospects.