A novel electrochemically switched ion exchange system for phenol recovery and regeneration of NaOH from sodium phenolate wastewater

A review on recent advancements in extraction, removal and recovery of phenols from phenolic wastewater: Challenges and future outlook

Water pollution is the major problem seen in today's scenario and even pollutants at low concentration harms our environment. In industrial sector usage of phenol is seen even at low concentrations. The interaction of phenol in the environment provides adverse effects to living beings. This review focuses on the toxicity of phenol and its impact towards environment and human health. The treatment techniques such as distillation, extraction, wet air oxidation, membrane process, electrochemical oxidation, biological treatment and finally adsorption techniques were discussed. Among many treatment techniques so far utilized in the treatment of phenol, adsorption was considered as one of the best technique due to its advantages such as reusability, ease in operation, large availability etc., This review also highlights the adsorption technique for the cleaner removal of phenol from aqueous solution with novel as well as low-cost adsorbents in the removal of phenolic compounds. This review also discusses about the drawbacks and issues related with adsorption of phenolic compounds.

Recovery of resources from industrial wastewater employing electrochemical technologies: status, advancements and perspectives

In the last two decades, water use has increased at twice the rate of population growth. The freshwater resources are getting polluted by contaminants like heavy metals, pesticides, hydrocarbons, organic waste, pathogens, fertilizers, and emerging pollutants. Globally more than 80% of the wastewater is released into the environment without proper treatment. Rapid industrialization has a dramatic effect on developing countries leading to significant losses to economic and health well-being in terms of toxicological impacts on humans and the environment through air, water, and soil pollution. This article provides an overview of physical, chemical, and biological processes to remove wastewater contaminants. A physical and/or chemical technique alone appears ineffective for recovering useful resources from wastewater containing complex components. There is a requirement for more processes or processes combined with membrane and biological processes to enhance operational efficiency and quality. More processes or those that are combined with biological and membrane-based processes are required to enhance operational efficiencies and quality. This paper intends to provide an exhaustive review of electrochemical technologies including microbial electrochemical technologies. It provides comprehensive information for the recovery of metals, nutrients, sulfur, hydrogen, and heat from industrial effluents. This article aims to give detailed information into the advancements in electrochemical processes to energy use, improve restoration performance, and achieve commercialization. It also covers bottlenecks and perspectives of this research area.

Evaluation of an Ionic Porous Organic Polymer for Water Remediation

The targeted synthesis of a novel ionic porous organic polymer (iPOP) was reported. The compound (denoted as QUST-iPOP-1) was built up through a quaternization reaction of tris(4-imidazolylphenyl)amine and cyanuric chloride, and then benzyl bromide was added to complete the quaternization of the total imidazolyl units. It featured a special exchangeable Cl^-/Br^--rich structure with high permanent porosity and wide pore size distribution, enabling it to rapidly and effectively remove environmentally toxic oxo-anions including Cr₂O₇^2-, MnO₄^-, and ReO₄^- and anionic organic dyes with different sizes including methyl blue, Congo red, and methyl orange from water. Notably, QUST-iPOP-1 showed ultra-high capacity values for radioactive TcO₄^- surrogate anions (MnO₄^- and ReO₄^-), Cr₂O₇^2-, methyl blue, and Congo red, and these were comparable to some reported compounds of exhaustive research. Furthermore, the relative removal rate was high even when other concurrent anions existed.

Overview of recent developments of resource recovery from wastewater via electrochemistry-based technologies

As the rapid increase of the worldwide population, recovering valuable resources from wastewater have attracted more and more attention by governments and academia. Electrochemical technologies have been extensively investigated over the past three decades to purify wastewater. However, the application of these technologies for resource recovery from wastewater has just attracted limited attention. In this review, the recent (2010-2020) electrochemical technologies for resource recovery from wastewater are summarized and discussed for the first time. Fundamentals of typical electrochemical technologies are firstly summarized and analyzed, followed by the specific examples of electrochemical resource recovery technologies for different purposes. Based on the fundamentals of electrochemical reactions and without the addition of chemical agents, metallic ions, nutrients, sulfur, hydrogen and chemical compounds can be effectively recovered by means of electrochemical reduction, electrochemical induced precipitation, electrochemical stripping, electrochemical oxidation and membrane-based electrochemical processes, etc. Pros and cons of each electrochemical technology in practical applications are discussed and analyzed. Single-step electrochemical process seems ineffectively to recover valuable resources from the wastewater with complicated constituents. Multiple-step processes or integrated with biological and membrane-based technologies are essential to improve the performance and purity of products. Consequently, this review attempts to offer in-depth insights into the developments of next-generation of electrochemical technologies to minimize energy consumption, boost recovery efficiency and realize the commercial application.

Sodium Lignosulfonate Modified Polystyrene for the Removal of Phenol from Wastewater

An eco-friendly and novel water treatment material was synthesized using sodium lignosulfonate modified polystyrene (SLPS), which can be used to eliminate phenols in aqueous solution. SLPS was characterized by BET, FTIR, SEM, and EDS. The effect of the initial pH value, phenol content, adsorption time, and temperature on the absorbability of phenol in SLPS was investigated through adsorption experiments. It was found that SLPS could efficiently adsorb phenol in aqueous solution at a pH value of about 7. The test results revealed that the kinetic adsorption and isotherm adsorption could be successfully described using the pseudo second-order and Langmuir models, respectively. It was illustrated that the phenol adsorption on SLPS was dominated by chemisorption and belonged to monolayer adsorption. The max. phenol adsorption value of SLPS was 31.08 mg/g at 30 °C. Therefore, SLPS displayed a great potential for eliminating phenol from polluted water as a kind of novel and effective adsorbent.