Plasmonic p-n heterojunction of Ag/Ag2S/Ag2MoO4 with enhanced Vis-NIR photocatalytic activity for purifying wastewater

Synthesis of Dual p-n Heterojunction of Ni/Mn-MOF-74/CdS@Co3O4 Photocatalyst as a Photoassisted Fenton-like Catalyst for Removal of Tetracycline Hydrochloride

In this study, a novel composite material, Ni/Mn-MOF-74/CdS@Co3O4 was synthesized. This material consisted of a dual p-n heterojunction, which enabled efficient separation and transfer of charge carriers. Compared to a single p-n heterojunction, the presence of this dual heterojunction significantly enhanced the overall efficiency. The improved efficiency could be attributed to the unique properties of the constituent semiconductors. Co3O4 exhibited p-type semiconductor properties, while Ni/Mn-MOF-74 and CdS exhibited n-type semiconductor properties. By a combination of these materials to form a composite photocatalyst, a Z-type heterojunction was created at the interface of the p-n junction. This design established an internal electric field at both ends, effectively separating the photogenerated electrons and holes in each individual photocatalyst. As a result, the respective photocatalytic activities of the materials were maximized. To demonstrate the practical application of this composite material, it was utilized for the activation of peroxymonosulfate under visible light irradiation, with the aim of enhancing the photocatalytic degradation efficiency of tetracycline hydrochloride. The photocatalytic mechanism of Ni/Mn-MOF-74/CdS@Co3O4 in activating peroxymonosulfate and degrading tetracycline hydrochloride was investigated in detail. Furthermore, the toxicity of tetracycline hydrochloride and its intermediates was evaluated by using toxicity evaluation software.

Ag2S Nanoparticles Supported on 3D Flower-Shaped Bi2WO6 Enhanced Visible Light Catalytic Degradation of Tetracycline

A three-dimensional flower-shaped Bi2WO6 has been prepared by a hydrothermal procedure without the addition of an auxiliary agent and under neutral conditions with ultrapure water serving as solvent, and the Ag2S-Bi2WO6 composite with weight ratios of 5, 10, and 15% was prepared by a hydrothermal method. The crystallinity, morphology, mode of binding, and optical properties of the Ag2S-Bi2WO6 composite were characterized, the results of which showed that the composite had excellent dispersion, crystallinity, and purity. The composite with a weight ratio of 10% had the best photocatalytic performance, and the degradation rate of tetracycline reached 95.51% within 120 min, an increase of 27.35% over Bi2WO6. In experiments, some focus was given to the effect of the initial solution pH and the concentrations of humic acid and inorganic anions on the degradation efficiency. Based on free radical capture experiments and the semiconductor theory, the main active substances and mechanisms in the optical catalytic reaction process were studied, and speculation was given concerning the degradation pathway for the target pollutants. This study has conceived novel methods for the development of dual semiconductor systems consisting of a Ag NP composite and in doing so has provided new approaches for the development and photocatalysis for water pollution control.

AgBr nanoparticle surface modified SnO2 enhanced visible light catalytic performance: characterization, mechanism and kinetics study

In this study, a simple hydrothermal procedure and in situ precipitation method were used to prepare SnO2-AgBr composites, where the molar ratios of SnO2 and AgBr were 1 : 1, 1 : 2 and 2 : 1. Characterization results showed that the composites had excellent dispersion, crystallinity, and purity. A photocatalytic degradation experiment and first-order kinetic model indicate that SnO2-AgBr (1 : 1) had the best photocatalytic performance, and the degradation rates of 30 mg L-1 simulated MO and MG wastewater reached 96.71% and 93.36%, respectively, in 150 min, which were 3.5 times those of SnO2. The degradation rate of MO and MG increases with the dosage. Humic acid inhibited the degradation of MG, while a low concentration of humic acid promoted the degradation of MO, and the composite has good stability with pH. A free radical trapping experiment shows that ·OH and ·O2- were the main active substances, and h+ was the secondary one. According to the results of the characterization and photocatalysis experiments, a Z-scheme mechanism for the SnO2-AgBr composite was proposed, and the degradation pathway of target pollutants was speculated upon. This study has conceived novel methods for the development of a mature Z-scheme mechanism and in doing so has provided new approaches for the development of photocatalysis for water pollution control.

Synthesis of Ag3PO4/Ag/g-C3N4 Composite for Enhanced Photocatalytic Degradation of Methyl Orange

In this study, we have successfully constructed Ag3PO4/Ag/g-C3N4 heterojunctions via the hydrothermal method, which displays a wide photo-absorption range. The higher photocurrent intensity of Ag3PO4/Ag/g-C3N4 indicates that the separation efficiency of the photogenerated electron-hole pairs is higher than that of both Ag3PO4 and Ag/g-C3N4 pure substances. It is confirmed that the efficient separation of photogenerated electron-hole pairs is attributed to the heterojunction of the material. Under visible light irradiation, Ag3PO4/Ag/g-C3N4-1.6 can remove MO (~90%) at a higher rate than Ag3PO4 or Ag/g-C3N4. Its degradation rate is 0.04126 min-1, which is 4.23 and 6.53 times that of Ag/g-C3N4 and Ag3PO4, respectively. After five cycles of testing, the Ag3PO4/Ag/g-C3N4 photocatalyst still maintained high photocatalytic activity. The excellent photocatalysis of Ag3PO4/Ag/g-C3N4-1.6 under ultraviolet-visible light is due to the efficient separation of photogenerated carriers brought about by the construction of the Ag3PO4/Ag/g-C3N4 heterostructure. Additionally, Ag3PO4/Ag/g-C3N4 specimens can be easily recycled with high stability. The effects of hydroxyl and superoxide radicals on the degradation process of organic compounds were studied using electron paramagnetic resonance spectroscopy and radical quenching experiments. Therefore, the Ag3PO4/Ag/g-C3N4 composite can be used as an efficient and recyclable UV-vis spectrum-driven photocatalyst for the purification of organic pollutants.

Synthesis of cesium lead halide perovskite/zinc oxide (CsPbX3/ZnO, X= Br, I) as heterostructure photocatalyst with improved activity for heavy metal degradation

Inorganic perovskites have been recognized as highly potent materials for the display and medical industries due to their outstanding features. However, there haven’t been many reports on their implications as a photocatalyst for the removal of heavy metals. Photocatalysis has been regarded as a significant approach for the removal of pollutants because of its great sustainability, improved efficiency, and reduced energy consumption. Here, we applied inorganic cesium lead halides (Br and I) with zinc oxide heterostructure as a photocatalyst for the first time. The heterostructure has been synthesized by the traditional hot injection strategy and its photocatalytic activity was systematically investigated. Interestingly, the CsPbX₃/ZnO heterostructure as a photocatalyst has a homogeneous geometry and possesses an excellent degradation efficiency of over 50% under xenon UV-Visible light. The CsPbX₃/ZnO catalyst carries superior oxidation/reduction properties and ionic conductivity due to the synergistic photogenerated charge carrier and interaction between CsPbX₃ and ZnO. The recycling experiment showed the good stability of the catalysts. These findings suggest that inorganic lead halide heterostructure has the potential to be used for heavy metal degradation and water pollution removal catalysts.

Fluid Field Modulation in Mass Transfer for Efficient Photocatalysis

Mass transfer is an essential factor determining photocatalytic performance, which can be modulated by fluid field via manipulating the kinetic characteristics of photocatalysts and photocatalytic intermediates. Past decades have witnessed the efforts and achievements made in manipulating mass transfer based on photocatalyst structure and composition design, and thus, a critical survey that scrutinizes the recent progress in this topic is urgently necessitated. This review examines the basic principles of how mass transfer behavior impacts photocatalytic activity accompanying with the discussion on theoretical simulation calculation including fluid flow speed and pattern. Meanwhile, newly emerged viable photocatalytic micro/nanomotors with self-thermophoresis, self-diffusiophoresis, and bubble-propulsion mechanisms as well as magnet-actuated photocatalytic artificial cilia for facilitating mass transfer will be covered. Furthermore, their applications in photocatalytic hydrogen evolution, carbon dioxide reduction, organic pollution degradation, bacteria disinfection and so forth are scrutinized. Finally, a brief summary and future outlook are presented, providing a viable guideline to those working in photocatalysis, mass transfer, and other related fields.

Silver based photocatalysts in emerging applications

The infinite availability of solar energy grants the potential of fulfilling the energy demands and environmental sustainability requirements with more feasible and reliant renewable energy forms through photocatalysis. In the past decade, the intensive plasmonic effect, suitable work function, superior electrical conductivity and physiochemical properties have made Ag-based photocatalysts attractive components for emerging applications. The local surface plasmon resonance effect (LSPR) provides extra hot-carriers to participate in the photocatalytic process, and Schottky/Ohmic contacts would facilitate charge transfer. Here, recent studies focused on Ag-based photocatalysts for emerging applications are reviewed. Notably, the mechanisms of LSPR, the Schottky barrier and ohmic contacts are introduced together with urgent issues in CO₂ reduction, antibacterial application, H₂ generation, and environmental hazard removal. Additionally, some perspectives and directions on more comprehensive designs on material system, band alignment and functionalization are given to further the exploration in this research area.

TiO2 NPs/h-BN: Preparation and catalytic activities of a novel AP catalyst

The thermal decomposition performance of an oxidizer directly determines the thrust and specific impulse properties of the solid propellant. Hexagonal boron nitride (h-BN) has the characteristics of high catalytic activity and good stability, which can improve the heat release and decomposition temperature of the oxidant, and then improve the energy performance of the propellant. In this study, a novel hybrid material TiO₂ NPs/h-BN was successfully prepared by in situ growth, and it was found that when 5 wt.% TiO₂ NPs/h-BN was added, the initial decomposition temperature of ammonium perchlorate (AP) decreased by 67.6°C. Due to the addition of TiO₂, the gap between the h-BN layers as well as the specific surface increased, which optimized its thermocatalytic performance, and it also proposed a catalytic mechanism for the thermal decomposition process of AP.

A zero-dimensional/two-dimensional Ag-Ag2S-CdS plasmonic nanohybrid for rapid photodegradation of organic pollutant by solar light

Herein, the two synthesis strategies are employed for rational design of 0D/2DAg-Ag₂S-CdS heterojunctions towards photocatalytic degradation of methyl orange (MO) under simulated solar light. As the first strategy, a ternary Ag-Ag₂S-CdS nanosheet (NS) heterojunction was fabricated via combined cation exchange and photo-reduction (CEPR) method (Ag-Ag₂S-CdS/CEPR). The second strategy employed coprecipitation (CP) method (Ag-Ag₂S-CdS/CP). Strikingly, SEM, TEM and HR-TEM images are manifested the first strategy is beneficial for retaining the original thickness (20.2 nm) of CdS NSs with a dominant formation of metallic Ag, whereas the second strategy increases the thickness (33.4 nm) of CdS NSs with a dominant formation of Ag₂S. The Ag-Ag₂S-CdS/CEPR exhibited 1.8-fold and 3.5-fold enhancement in photocatalytic activities as compared to those of Ag-Ag₂S-CdS/CP and bare CdS NSs, respectively. This enhanced photocatalytic activity could be ascribed to fact that the first strategy produces a high-quality interface with intimate contact between the Ag-Ag₂S-CdS heterojunctions, resulting in enhanced separation of photo-excited charge carriers, extended light absorption, and enriched active-sites. Furthermore, the degradation efficiency of Ag-Ag₂S-CdS/CEPR was significantly reduced to ∼5% in the presence of BQ (•O₂^- scavenger), indicating that •O₂^- is the major active species that can decompose MO dye under simulated solar light.

Self-assembled ultrathin closely bonded 2D/2D heterojunction for enhanced visible-light-induced photocatalytic oxidation and reaction mechanism insights

Two-dimensional (2D) layered heterojunctions with a staggered band structure and unique interface properties exhibit promising application prospects in photocatalytic pollutant removal, water splitting, and CO₂ reduction. Ultrathin 2D/2D heterojunctions with a large specific surface area and a short migration path of the photogenerated charge always illustrate a better photocatalytic performance than non-ultrathin 2D heterojunction photocatalysts. In this study, a novel ultrathin 2D/2D heterojunction of the Bi₂O₂(OH)(NO₃)/BiOBr nanosheet composite (ultrathin BION/BiOBr) was in situ self-assembled though a cetyltrimethylammonium bromide assisted one-step hydrothermal method. Benefiting from the advantage of the unique ultrathin heterojunction structure, the ultrathin 2D/2D BION/BiOBr heterojunctions exhibit a greatly improved photocatalytic removal effect for multiple pollutants compared to the nanocrystal BION/BiOBr, pure BION. As a representative, the ultrathin 2D/2D Br-modified BION/BiOBr heterojunction shows an enhanced tetracycline degradation rate of 76%, which corresponded to a higher photodegradation rate constant of 0.01116 min^-1 when compared to pure BION (17%, 0.00161 min^-1) and nanocrystal BION/BiOBr (24%, 0.00223 min^-1) under visible-light irradiation for 2 h. A series of characterization and density functional theory calculations demonstrate the enhanced separation and migration efficiency of the photogenerated electrons and holes over the ultrathin heterojunction, facilitating the formation of oxidizing groups for the organic pollutant removal. The possible mechanism of the TC photodegradation and the possible photodegradation pathway are also investigated in detail. This work provides a feasible method for constructing ultrathin 2D/2D heterojunction materials for environmental purification.

Facile construction of novel organic-inorganic tetra (4-carboxyphenyl) porphyrin/Bi2MoO6 heterojunction for tetracycline degradation: Performance, degradation pathways, intermediate toxicity analysis and mechanism insight

Developing durable photocatalysts with highly efficient antibiotics degradation is crucial for environment purification. Herein, tetra (4-carboxyphenyl) porphyrin (TCPP) was loaded onto the surface of Bi₂MoO₆ microspheres to gain hierarchical organic-inorganic TCPP/Bi₂MoO₆ (TCPP/BMO) heterojunctions via a facile impregnation strategy. The catalytic properties of these catalysts were comprehensively investigated through the photodegradation of tetracycline hydrochloride (TC) under visible light. Among all the TCPP/BMO heterojunctions, the highest photodegradation rate constant (0.0278 min^-1) was achieved with 0.25 wt% TCPP (TCPP/BMO-2), which was approximately 1.15 folds greater than that of pristine Bi₂MoO₆ and far superior to pure TCPP. The extremely high photocatalytic performance is attributed to the interfacial interaction between TCPP and Bi₂MoO₆, which favors the efficient separation of charge carriers and the enhancement of visible-light absorbance. TCPP/BMO-2 possesses high mineralization capability and good recycling performance. Photo-induced O₂^-, h⁺, and OH were mainly responsible for the degradation of TC. The degradation pathways of TC and toxicity of degradation intermediates were analyzed based on the intermediates detected by the high performance liquid chromatography-mass spectrometer (HPLC-MS) and the toxicity assessment by the quantitative structure-activity relationship (QSAR) prediction. A possible photocatalytic mechanism over TCPP/BMO is proposed. This work offers an insight in developing the porphyrin-based organic-inorganic heterojunctions for effectively remedying pharmaceutical wastewater.

Enhanced UV Photoresponsivity of ZnO Nanorods Decorated with Ag2S/ZnS Nanoparticles by Successive Ionic Layer Adsorption and Reaction Method

Recently, different kinds of energy band structures have been utilized to improve the photoelectric properties of zinc oxide (ZnO). In this work, ZnO nanorods were prepared by the hydrothermal method and then decorated with silver sulfide (Ag2S)/zinc sulfide (ZnS) via two-step successive ionic layer adsorption and reaction method. The photoelectric properties of nanocomposites are investigated. The results show that ZnO decorated with Ag2S/ZnS can improve the photocurrent of photodetectors from 0.34 to 0.56 A at bias of 9 V. With the immersion time increasing from 15 to 60 minutes, the photocurrent of photodetectors increases by 0.22 A. The holes in the valence band of ZnO can be transferred to the valence band of ZnS and Ag2S, which promotes the separation and suppresses the recombination of hole-electron pairs generated in ZnO. Moreover, electrons excited by ultraviolet (UV) light in Ag2S can also be injected into the conduction band of ZnO, which causes the photocurrent to increase more than the ZnO photodetector.

Fabrication of a novel ternary heterojunction composite Ag2MoO4/Ag2S/MoS2 with significantly enhanced photocatalytic performance

A novel ternary heterojunction Ag₂MoO₄/Ag₂S/MoS₂ was successfully fabricated via a facile two-step method. The prepared ternary heterojunction showed much enhanced catalytic activity compared with monomers and binary heterojunctions.

g-C3N4 Modified by meso-Tetrahydroxyphenylchlorin for Photocatalytic Hydrogen Evolution Under Visible/Near-Infrared Light

A new photocatalyst denoted as mTHPC/pCN was prepared by modifying protonated graphitic carbon nitride (pCN) by meso-tetrahydroxyphenylchlorin (mTHPC). Relevant samples were characterized via various methods including zeta potential measurements, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, N₂ adsorption–desorption, transmission electron microscopy, ultraviolet-visible–near-infrared spectroscopy, electrochemical impedance spectroscopy, photocurrent response measurements, electron spin resonance spectroscopy, and phosphorescence spectroscopy. Compared with pCN, mTHPC/pCN shows enhanced absorption in the visible and near-infrared regions and thus higher photocatalytic activity in hydrogen evolution. A possible mechanism for mTHPC/pCN is proposed.

Preparation and Photocatalytic Performance for Degradation of Rhodamine B of AgPt/Bi4Ti3O12 Composites

Loading a noble metal on Bi₄Ti₃O₁₂ could enable the formation of the Schottky barrier at the interface between the former and the latter, which causes electrons to be trapped and inhibits the recombination of photoelectrons and photoholes. In this paper, AgPt/Bi₄Ti₃O₁₂ composite photocatalysts were prepared using the photoreduction method, and the effects of the type and content of noble metal on the photocatalytic performance of the catalysts were investigated. The photocatalytic degradation of rhodamine B (RhB) showed that the loading of AgPt bimetallic nanoparticles significantly improved the catalytic performance of Bi₄Ti₃O₁₂. When 0.10 wt% noble metal was loaded, the degradation rate for RhB of Ag_0.7Pt_0.3/Bi₄Ti₃O₁₂ was 0.027 min⁻¹, which was respectively about 2, 1.7 and 3.7 times as that of Ag/Bi₄Ti₃O₁₂, Pt/Bi₃Ti₄O₁₂ and Bi₄Ti₃O_12. The reasons may be attributed as follows: (i) the utilization of visible light was enhanced due to the surface plasmon resonance effect of Ag and Pt in the visible region; (ii) Ag nanoparticles mainly acted as electron acceptors to restrain the recombination of photogenerated electron-hole pairs under visible light irradiation; and (iii) Pt nanoparticles acted as electron cocatalysts to further suppress the recombination of photogenerated electron-hole pairs. The photocatalytic performance of Ag_0.7Pt_0.3/Bi₄Ti₃O₁₂ was superior to that of Ag/Bi₄Ti₃O₁₂ and Pt/Bi₃Ti₄O₁₂ owing to the synergistic effect between Ag and Pt nanoparticles.