Highly efficient activation of peroxymonosulfate by Co3O4/Bi2MoO6 p-n heterostructure composites for the degradation of norfloxacin under visible light irradiation

Oxygen vacancies and Y-O-Ag bonds in the Z-scheme heterojunction cooperate to promote photodegradation of organic pollutants

Y2O3 is a cost-effective and environmentally friendly wide-band gap photocatalyst with extensive application potential. However, its limited ability to be excited by visible light restricts its practical uses. In this study, we coupled the narrow bandgap semiconductor AgI with Y2O3 to form a Z-scheme heterostructure, significantly promoting its photocatalytic degradation activity. Characterization and experimental results demonstrated the formation of Y-O-Ag bonds through coupling with AgI, leading to an increase in oxygen vacancies in Y2O3, which promotes the chemisorption of H2O and O2. The Y-O-Ag bond introduction promotes electron transfer, improves hole utilization, and boosts energy transfer efficiency, thus promoting the efficient generation of ·OH and 1O2. The photocatalytic degradation rates of RhB and o-nitrophenol by 7.5% AgI/Y2O3 were 26.5 and 4 times higher than those of pure Y2O3, respectively. This study provides theoretical support for the Z-scheme heterojunction to improve photocatalytic activity and offers efficient solutions and practical design ideas for sewage purification.

Insights into copper(I) phenylacetylide with in-situ transformation of oxygen and enhanced visible-light response for water decontamination: Cu-O bond promotes exciton dissociation and charge transfer

The widespread contamination of hexavalent chromium (Cr(VI)), pharmaceuticals and personal care products (PPCPs), and dyes is a growing concern. necessitating the development of convenient and effective technologies for their removal. Copper(I) phenylacetylide (PhC2Cu) has emerged as a promising photocatalyst for environmental remediation. In this study, we introduced a functional Cu-O bond into PhC2Cu (referred to as OrPhC2Cu) by creatively converting the adsorbed oxygen on the surface of PhC2Cu into a Cu-O bond to enhance the efficiency of Cr(VI) photoreduction, PPCPs photodegradation, and dyes photodegradation through a facile vacuum activating method. The incorporation of the Cu-O bond optimized the electron structure of OrPhC2Cu, facilitating exciton dissociation and charge transfer. The exciton dissociation behavior and charge transfer mechanism were systematically investigated for the first time in the OrPhC2Cu system by photoelectrochemical tests, fluorescence and phosphorescence (PH) techniques, and density functional theory (DFT) calculations. Remarkably, the enhanced visible-light response of OrPhC2Cu improved photon utilization and significantly promoted the generation of reactive species (RSs), leading to the highly efficient Cr(VI) photoreduction (98.52% within 25 min) and sulfamethazine photodegradation (94.65% within 60 min), with 3.91 and 5.23 times higher activity compared to PhC2Cu. Additionally, the photocatalytic efficiency of OrPhC2Cu in degrading anionic dyes surpassed that of cationic dyes. The performance of the OrPhC2Cu system in treating electroplating effluent or natural water bodies suggests its potential for practical applications.

Advanced photocatalytic disinfection mechanisms and their challenges

Currently, microbial contamination issues have globally brought out a huge health threat to human beings and animals. To be specific, microorganisms including bacteria and viruses display durable ecological toxicity and various diseases to aquatic organisms. In the past decade, the photocatalytic microorganism inactivation technique has attracted more and more concern owing to its green, low-cost, and sustainable process. A variety kinds of photocatalysts have been employed for killing microorganisms in the natural environment. However, two predominant shortcomings including low activity of photocatalysts and diverse impacts of water characteristics are still displayed in the current photocatalytic disinfection system. So far, various strategies to improve the inherent activity of photocatalysts. Other than the modification of photocatalysts, the optimization of environments of water bodies has been also conducted to enhance microorganisms inactivation. In this mini-review, we outlined the recent progress in photocatalytic sterilization of microorganisms. Meanwhile, the relevant methods of photocatalyst modification and the influences of water body characteristics on disinfection ability were thoroughly elaborated. More importantly, the relationships between strategies for constructing advanced photocatalytic microorganism inactivation systems and improved performance were correlated. Finally, the perspectives on the prospects and challenges of photocatalytic disinfection were presented. We sincerely hope that this critical mini-review can inspire some new concepts and ideas in designing advanced photocatalytic disinfection systems.

Constructing Built-in-Electric Field for Boosting Electrocatalytic Water Splitting

Electrocatalytic water splitting shows great potential for producing clean and green hydrogen, but it is hindered by slow reaction kinetics. Advanced electrocatalysts are needed to lower the energy barriers. The establishment of built-in electric fields (BIEF) in heterointerfaces has been found to be beneficial for speeding up electron transfer, increasing electrical conductivity, adjusting the local reaction environment, and optimizing the chemisorption energy with intermediates. Engineering and modifying the BIEF in heterojunctions offer significant opportunities to enhance the electronic properties of catalysts, thus improving the reaction kinetics. This comprehensive review focuses on the latest advances in BIEF engineering in heterojunction catalysts for efficient water electrolysis. It highlights the fundamentals, engineering, modification, characterization, and application of BIEF in electrocatalytic water splitting. The review also discusses the challenges and future prospects of BIEF engineering. Overall, this review provides a thorough examination of BIEF engineering for the next generation of water electrolysis devices.

A novel ZnCo2O4/BiOBr p-n/Z-scheme heterojunction photocatalyst for enhancing photocatalytic activity

In this study, we developed a novel p-n/Z-scheme heterojunction photocatalyst, ZnCo2O4/BiOBr (ZCo/BB), through a straightforward and safe hydrothermal-calcination-solvent thermal method. The composite photocatalyst demonstrated exceptional photocatalytic efficacy, particularly when the mass ratio of ZnCo2O4 was 25% (referred to as 25% ZCo/BB). Structural characterization and electrochemical analysis revealed that 25% ZCo/BB exhibited a larger specific surface area and a faster electron transfer rate. Under visible light exposure for 30 min, methylene blue (MB) degradation reached 92%, and the reaction rate constants were 8.2 and 3.7 times higher than those observed for individual ZnCo2O4 and BiOBr, respectively. Furthermore, the 25% ZCo/BB demonstrated exceptional photocatalytic stability over four cycles, maintaining over 80% MB degradation after each cycle. The outstanding photocatalytic activity was attributed to the p-n/Z-scheme heterojunction construction, which promoted charge separation and inhibited carrier recombination. In addition, ·OH and h+ were the major active species in photocatalysis, and · O 2 - was identified as a secondary active species. This work presents an efficient heterojunction photocatalyst for the degradation of organic wastewater.

Constructing a Z-Scheme Co3O4/BiOBr Heterojunction to Enhance Photocatalytic Peroxydisulfate Oxidation of High-Concentration Rhodamine B: Mechanism, Degradation Pathways, and Toxicological Evaluations

Photocatalytic coupling technologies have emerged as popular strategies to increase the treatment efficiency of dye-containing wastewater. Herein, the Z-scheme Co3O4/BiOBr heterojunction (Z-CBH) was constructed and developed as a photocatalytic peroxydisulfate (PDS) activator for the degradation of high-concentration Rhodamine B (RhB). Multiple testing techniques were employed to confirm the formation of Z-CBHs. When 0.1 g·L-1 of Z-CBH20 and 1.0 mmol·L-1 of PDS were added simultaneously under simulated sunlight irradiation, the RhB degradation efficiency could approach 91.3%. Its reaction rate constant (0.01231 min-1) was much beyond the sum of those in the Z-CBH20/light system (0.00436 min-1) and the PDS/light system (0.0062 min-1). h+, •OH, •O2-, SO4•-, and 1O2 were detected as the dominant reactive species for RhB degradation. The potential mechanism of photocatalytic PDS oxidation was proposed. The possible intermediates were determined by high-performance liquid chromatography-quadrupole time-of-flight mass spectrometry assisted with density functional theory and Fukui theory. The possible degradation pathways of RhB degradation were put forward. The toxicological properties of RhB and its intermediates were evaluated by quantitative structure-activity relationship prediction. This work will not only provide a reference for developing photocatalytic persulfate activators but also gain an insight into the degradation pathways of RhB and the toxicity of its intermediates.

Facilitated Visible-Light-Driven Peroxymonosulfate Activation by a Co-Fe Layered Double Hydroxide Derived p-n Heterostructure for Sulfadiazine Degradation: Affecting Parameters, Kinetics, and Mechanistic Insights

The utilization of multivalence ionic metal species generated through a peroxymonosulfate (PMS)-assisted photocatalytic system is a promising platform for the selective degradation of water contaminants. However, achieving an effective electron transport and enhanced separation efficiency for these metal species is a daunting challenge. Thus, our current study addresses this challenge by using a Co-Fe-based layered-double-hydroxide template to synthesize a Co3O4/FeCo2O4 p-n heterojunction composite via a simple monosynthetic route. The resultant composite is thoroughly validated through advanced characterization techniques that efficiently activate PMS for sulfadiazine (SDZ) degradation under visible light, achieving a remarkable degradation efficiency of up to 90%. This accomplishment is attributed to factors including intimate interfacial contact, excellent light harvesting, mesoporosity, and oxygen vacancies within the composite. The formation of a distinct p-n heterojunction following the S-scheme charge dynamic significantly enhances photogenerated carrier separation and reduces charge recombination. The research delves into comprehensive investigations including degradation studies, active species trapping experiments, parameter exploration, and in-depth liquid chromatography-mass spectrometry for analysis of the degradation byproducts and pathway. Induced oxygen vacancies, strategically placed active surface sites, and mesoporosity in the Co3O4/FeCo2O4 composite synergistically boosted the sluggish PMS activation, leading to enhanced SDZ degradation. This study introduces a new perspective by demonstrating the potential of a single-material, mixed-metal oxide-based p-n heterojunction photocatalytic system following the S-scheme charge-transfer route for SDZ degradation. The findings contribute toward emphasizing the importance of tailored composite materials in tackling persistent contaminants.

Efficient degradation of ciprofloxacin in wastewater by CuFe2O4/CuS photocatalyst activated peroxynomosulfate

In this study, CuFe2O4/CuS composite photocatalysts were successfully synthesized for the activation of peroxynomosulfate to remove ciprofloxacin from wastewater. The structural composition and morphology of the materials were analyzed by XRD, SEM, TEM, and Raman spectroscopy. The electrochemical properties of the samples were tested by an electrochemical workstation. The band gap of the samples was calculated by DFT and compared with the experimental values. The effects of different catalysts, oxidant PMS concentrations, and coexisting ions on the experiments were investigated. The reusability and stability of the photocatalysts were also investigated. The mechanism of the photocatalytic degradation process was proposed based on the free radical trapping experiment. The results show that the p-p heterojunction formed between the two contact surfaces of the CuFe2O4 nanoparticle and CuS promoted the charge transfer between the interfaces and inhibited the recombination of electrons and holes. CuFe2O4-5/CuS photocatalyst has the best catalytic activity, and the removal rate of ciprofloxacin is 93.7%. The intermediates in the degradation process were tested by liquid chromatography-mass spectrometry (LC-MS), and the molecular structure characteristics of ciprofloxacin were analyzed by combining with DFT calculations. The possible degradation pathways of pollutants were proposed. This study reveals the great potential of the photocatalyst CuFe2O4/CuS in the activation of PMS for the degradation of ciprofloxacin wastewater.

Oxygen Vacancy-Mediated CuWO4/CuBi2O4 Samples with Efficient Charge Transfer for Enhanced Catalytic Activity toward Photodegradation of Pharmacologically Active Compounds

Photocatalytic degradation is a promising method for controlling the increasing contamination of the water environment due to pharmacologically active compounds (PHACs). Herein, oxygen vacancy (OV)-modulated Z-scheme CuWO4/CuBi2O4 hybrid systems were fabricated via thermal treatment by loading of CuWO4 nanoparticles with OVs on CuBi2O4 surfaces. The synthesized CuWO4/CuBi2O4 hybrid samples exhibited an enhanced photodegradation ability to remove PHACs under visible-light irradiation. More importantly, an optimized sample (10 wt % CuWO4/CuBi2O4) exhibited superior catalytic activity and excellent recycling stability for PHAC photodegradation. In addition, possible degradation paths for PHAC removal over the CuWO4/CuBi2O4 hybrid systems were proposed. The enhanced photocatalytic performance could be attributed to the efficient separation and transfer of photoformed charge pairs via the Z-scheme mechanism. This Z-scheme mechanism was systematically analyzed using trapping experiments of active species, ultraviolet photoelectron spectroscopy, electron spin resonance, and the photodepositions of noble metals. The findings of this study can pave the way for developing highly efficient Z-scheme photocatalytic systems for PHAC photodegradation.

Recent advances of modification effect in Co3O4-based catalyst towards highly efficient photocatalysis

Tricobalt tetroxide (Co3O4) has been developed as a promising photocatalyst material for various applications. Several reports have been published on the self-modification of Co3O4 to achieve optimal photocatalytic performance. The pristine Co3O4 alone is inadequate for photocatalysis due to the rapid recombination process of photogenerated (PG) charge carriers. The modification of Co3O4 can be extended through the introduction of doping elements, incorporation of supporting materials, surface functionalization, metal loading, and combination with other photocatalysts. The addition of doping elements and support materials may enhance the photocatalysis process, although these modifications have a slight effect on decreasing the recombination process of PG charge carriers. On the other hand, combining Co3O4 with other semiconductors results in a different PG charge carrier mechanism, leading to a decrease in the recombination process and an increase in photocatalytic activity. Therefore, this work discusses recent modifications of Co3O4 and their effects on its photocatalytic performance. Additionally, the modification effects, such as enhanced surface area, generation of oxygen vacancies, tuning the band gap, and formation of heterojunctions, are reviewed to demonstrate the feasibility of separating PG charge carriers. Finally, the formation and mechanism of these modification effects are also reviewed based on theoretical and experimental approaches to validate their formation and the transfer process of charge carriers.

Construction of PdSe2/ZnIn2S4 heterojunctions with covalent interface for highly efficient photocatalytic hydrogen evolution

Constructing semiconductor heterojunctions can enable novel schemes for highly efficient photocatalytic activity. However, introducing strong covalent bonding at the interface remains an open challenge. Herein, ZnIn2S4 (ZIS) with abundant sulfur vacancies (Sv) is synthesized with the presence of PdSe2 as an additional precursor. The sulfur vacancies of Sv-ZIS are filled by Se atoms of PdSe2, leading to the Zn-In-Se-Pd compound interface. Our density functional theory (DFT) calculations reveal the increased density of states at the interface, which will increase the local carrier concentration. Moreover, the length of the Se-H bond is longer than that of the SH bond, which is good for the evolution of H2 from the interface. In addition, the charge redistribution at the interface results in a built-in field, providing the driving force for efficient separation of photogenerated electron-hole. Therefore, the PdSe2/Sv-ZIS heterojunction with strong covalent interface exhibits an excellent photocatalytic hydrogen evolution performance (4423 μmol g-1h-1) with an apparent quantum efficiency (λ > 420 nm) of 9.1 %. This work will provide new inspirations to improve photocatalytic activity by engineering the interfaces of semiconductor heterojunctions.

Construction of Co3O4 anchored on Bi2MoO6 microspheres for highly efficient photocatalytic peroxymonosulfate activation towards degradation of norfloxacin

Dissolved antibiotics have been a research subject due to their widespread presence and potential threats in drinking water treatment. To enhance the photocatalytic activity of Bi₂MoO₆ for the degradation of norfloxacin (NOR), the heterostructured Co₃O₄/Bi₂MoO₆ (CoBM) composites were synthesized by employing ZIF-67-derived Co₃O₄ on Bi₂MoO₆ microspheres. The as-synthesized resultant material 3-CoBM by 300 °C calcination was characterized by XRD, SEM, XPS, transient photocurrent techniques, and EIS. The photocatalytic performance was evaluated by monitoring different concentrations, NOR removal from aqueous solution. Compared with Bi₂MoO₆, 3-CoBM exhibited the better adsorption and elimination capacity of NOR due to the combined effect between peroxymonosulfate activation and photocatalytic reaction. The influences of catalyst dosage, PMS dosage, various interfering ions (Cl^-, NO₃^-, HCO₃^-, and SO₄^2-), pH value, and type of antibiotics for application removal were also invested. By activating PMS under visible-light irradiation, 84.95% of metronidazole (MNZ) can be degraded within 40 min, and NOR and tetracycline (TC) can be completely degraded using 3-CoBM. Degradation mechanism was elucidated by quenching tests in combination with EPR measurement, and the degree of activity of the active groups from strong to weak is h⁺, SO₄^-•, and •OH, respectively. The degradation products and conceivable degradation pathways of NOR were speculated by LC-MS. In combination of excellent peroxymonosulfate activation and highly enhanced photocatalytic performance, this newly Co₃O₄/Bi₂MoO₆ catalyst might be a promising candidate for degrading emerging antibiotic contamination in wastewater.

Direction regulation of interface carrier transfer and enhanced photocatalytic oxygen activation over Z-scheme Bi4V2O11/Ag/AgCl for water purification

Molecular oxygen activation is essential to the photocatalytic oxidation reaction, which is highly dependent on the construction of active sites and efficient charge transfer of photocatalysts. In this study, we constructed Bi₄V₂O₁₁/Ag/AgCl Z-type heterojunction photocatalysts with significantly enhanced molecular oxygen activation capacity. The systematic characterization and analysis including X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations confirmed that the formation of efficient Z-type heterostructure could be attributed to the introduction of Ag nanoparticles (NPs), which regulated the electron transfer direction from Bi₄V₂O₁₁ to AgCl. Owing to the advantage of enhanced charge transfer efficiency, the O₂^- generation capacity of Bi₄V₂O11/Ag/AgCl Z-scheme heterojunction was as high as 4.6 times that of pure Bi₄V₂O₁₁. Consequently, Bi₄V₂O₁₁/Ag/AgCl showed good degradation performance against tetracycline (TC), ciprofloxacin (CIP), ranitidine hydrochloride (RAN) and 2,4-dichlorophenoxyacetic acid (2,4-D) under visible light, and their degradation rates were 8.2 times, 5.9 times, 3.8 times and 11.9 times higher than those of Bi₄V₂O₁₁, respectively. This study provides an effective and feasible strategy to design photocatalyst with improved molecular oxygen activation efficiency.

Effect of metal doping (Me = Zn, Cu, Co, Mn) on the performance of bismuth ferrite as peroxymonosulfate activator for ciprofloxacin removal

In this study, a facile hydrothermal method was employed to prepare Me-doped Bi₂Fe₄O₉ (Me = Zn, Cu, Co, and Mn) as peroxymonosulfate (PMS) activator for ciprofloxacin (CIP) degradation. The characteristics of the Me-doped bismuth ferrites were investigated using various characterization instruments including SEM, TEM, FTIR and porosimeter indicating that the Me-doped Bi₂Fe₄O₉ with nanosheet-like square orthorhombic structure was successfully obtained. The catalytic activity of various Me-doped Bi₂Fe₄O₉ was compared and the results indicated that the Cu-doped Bi₂Fe₄O₉ at 0.08 wt.% (denoted as BFCuO-0.08) possessed the greatest catalytic activity (k_app = 0.085 min^-1) over other Me-doped Bi₂Fe₄O₉ under the same condition. The synergistic interaction between Cu, Fe and oxygen vacancies are the key factors which enhanced the performance of Me-doped Bi₂Fe₄O₉. The effects of catalyst loading, PMS dosage, and pH on CIP degradation were also investigated indicating that the performance increased with increasing catalyst loading, PMS dosage, and pH. Meanwhile, the dominant reactive oxygen species was identified using the chemical scavengers with SO₄^•-, ^•OH, and ¹O₂ playing a major role in CIP degradation. The performance of BFCuO-0.08 deteriorated in real water matrix (tap water, river water and secondary effluent) due to the presence of various water matrix species. Nevertheless, the BFCuO-0.08 catalyst possessed remarkable stability and can be reused for at least four successive cycles with >70% of CIP degradation efficiency indicating that it is a promising catalyst for antibiotics removal.

Calcination-Induced Oxygen Vacancies Enhancing the Photocatalytic Performance of a Recycled Bi2O3/BiOCl Heterojunction Nanosheet

With the rapid development of industry, bismuth-based semiconductors have been widely used for the photocatalytic degradation of organic contaminants discharged into wastewater. Herein, a Bi₂O₃/BiOCl (BBOC) heterojunction was constructed with high photocatalytic activity toward Rhodamine B (RhB) in the first cycle of the photocatalysis test, while the photocatalytic performance was drastically reduced after repeated testing. The adsorbed RhB molecules occupying the facial active sites of BBOC contributed to the decline of photocatalytic activity. The spent BBOC can be reactivated by the decomposition of the adsorbed RhB and the introduction of oxygen vacancies during calcination under an air atmosphere. The BBOC thus recovered exhibited a superior apparent rate constant of 0.08087 min^-1 compared with 0.05228 min^-1 of pristine BBOC. This study provided an effective strategy to investigate the deactivation/activation mechanism of bismuth-based heterojunction photocatalysts.

Efficient Degradation of Congo Red in Water by UV-Vis Driven CoMoO4/PDS Photo-Fenton System

In order to improve the catalytic activity of cobalt molybdate (CoMoO₄), a PDS-activated and UV-vis assisted system was constructed. CoMoO₄ was prepared by coprecipitation and calcination, and characterized by XRD, FTIR, Raman, SEM, TEM, XPS, TGA Zeta potential, BET, and UV-Vis DRS. The results showed that the morphology of the CoMoO₄ nanolumps consisted of stacked nanosheets. XRD indicated the monoclinic structures with C2/m (C³_2h, #12) space group, which belong to α-CoMoO₄, and both Co²⁺ and Mo⁶⁺ ions occupy distorted octahedral sites. The pH of the isoelectric point (pHIEP) of CMO-8 at pH = 4.88 and the band gap of CoMoO₄ was 1.92 eV. The catalytic activity of CoMoO₄ was evaluated by photo-Fenton degradation of Congo red (CR). The catalytic performance was affected by calcination temperature, catalyst dosage, PDS dosage, and pH. Under the best conditions (0.8 g/L CMO-8, PDS 1 mL), the degradation efficiency of CR was 96.972%. The excellent catalytic activity of CoMoO₄ was attributed to the synergistic effect of photo catalysis and CoMoO₄-activated PDS degradation. The capture experiments and the ESR showed that superoxide radical (·O₂^-), singlet oxygen (¹O₂), hole (h⁺), sulfate (SO₄^-·), and hydroxyl (·OH^-) were the main free radicals leading to the degradation of CR. The results can provide valuable information and support for the design and application of high-efficiency transition metal oxide catalysts.

Peroxymonosulfate-based photocatalytic oxidation of tetracycline by Fe2(MoO4)3/Cd0.5Ni0.5S heterostructure; DFT simulation

The current research is meant to develop novel semiconductor photocatalysts, for the decomposition of tetracycline (TC) as a model organic contaminant in the aquatic environment. The fabrication of Fe₂(MoO₄)₃/Cd_0.5Ni_0.5S (FMO/CNS) composite has proven to be an effective method for improving the sustainability and photocatalytic activity of Cd_0.5Ni_0.5S (CNS). Under visible light irradiation, FMO/CNS nanocomposite demonstrated significant PMS activation which led to 1.36 and 1.81 times TC removal efficiency as compared to immaculate Fe₂(MoO₄)₃(FMO) and CNS. FMO/CNS composite potentially promotes the segregation of electron-hole pairs (e^--h⁺) and exemplifies amazing photocatalytic performance for TC degradation. Its significant photocatalytic activity is due to its unique structure, which includes tiny pores on the surface that confine the PMS molecule to the interface. The FMO/CNS composite has significantly greater piezocatalytic activity than pure FMO and CNS, demonstrating the synergistic effect of FMO and CNS. In the degradation of TC, holes and key reactive radicals (^•O₂^-/^•OH/SO₄^-•) played a major role. Computational studies (DFT) estimates, including the determination of intermediates, confirmed that the hydroxyl addition and C-N cleavage pathways were responsible for TC degradation. As a result, this work delivers a new approach to developing novel photocatalysts with high photocatalytic activity for the abatement of organic contaminants in water.

Techniques for remediation of pharmaceutical pollutants using metal organic framework - Review on toxicology, applications, and mechanism

Treatment of recalcitrant and xenobiotic pharmaceutical compounds in polluted waters have gained significant attention of the environmental scientists. Antibiotics are diffused into the environment widely owing to their high usages, very particularly in the last two years due to over consumption during covid 19 pandemic worldwide. Quinolones are very effective antibiotics, but do not get completely metabolized due to which they pose severe health hazards if discharged without proper treatment. The commonly reported treatment methods for quinolones are adsorption and advanced oxidation methods. In both the treatment methods, metal organic frameworks (MOF) have been proved to be promising materials used as stand-alone or combined technique. Many composite MOF materials synthesized from renewable, natural, and harmless materials by eco-friendly techniques have been reported to be effective in the treatment of quinolones. In the present article, special focus is given on the abatement of norfloxacin and ofloxacin contaminated wastewater using MOFs by adsorption, oxidation/ozonation, photocatalytic degradation, electro-fenton methods, etc. However, integration of adsorption with any advanced oxidation methods was found to be best remediation technique. Of various MOFs reported by several researchers, the MIL-101(Cr)-SO₃H composite was able to give 99% removal of norfloxacin by adsorption. The MIL - 88A(Fe) composite and Fe LDH carbon felt cathode were reported to yield 100% degradation of ofloxacin by photo-Fenton and electro-fenton methods respectively. The synthesis methods and mechanism of action of MOFs towards the treatment of norfloxacin and ofloxacin as reported by several investigation reports are also presented.

Fe3N nanoparticles embedded in N-doped porous magnetic graphene for peroxymonosulfate activation: Radical and nonradical mechanism

The persistence of pharmaceutical and personal care products (PPCPs) such as norfloxacin (NFX) poses a serious threat to the water environment, and the development of efficient and cost-effective advanced oxidation catalysts is an important step toward resolving this issue. Herein, Fe and N co-doped graphene (FeNGO) was synthesized from graphene oxide (GO), urea, and iron salt via simple impregnation pyrolysis, and applied for activating peroxymonosulfate (PMS) to degrade NFX. FeNGO possessed a two-dimensional porous sheet structure and was rich in defects, nitrogen species, and active sites. Compared with the control catalyst doped with N or Fe alone, FeNGO/PMS system showed the best degradation performance with 97.7% removal of NFX after 30 min, the rate constant was 7.1 and 1.7 times than that for NGO and FeGO, respectively. Fe₃N was the main active site of FeNGO, and it is confirmed that singlet oxygen (¹O₂) and superoxide radical (O₂^•-) were the primary oxidation active species (ROS) during NFX degradation. The formation of ¹O₂ came from the transformation of O₂^•- and PMS decomposition. FeNGO showed strong pH adaptability, and also exhibited stale degradation performance in saliferous water matrices. It is believed that this work will offer theoretical and practical guidance for PMS activation by non-radical pathways.

Energy-efficient removal of trace antibiotics from low-conductivity water using a Ti4O7 reactive electrochemical ceramic membrane: Matrix effects and implications for byproduct formation

The inevitably high energy consumption of traditional electrochemical processes to treat low-conductivity water has limited their wider application. Herein, we present an energy-efficient alternative, i.e., a Ti₄O₇ reactive electrochemical ceramic membrane (Ti₄O₇-REM) system with a superior mass transfer ability. For the removal of 10-200 μM norfloxacin (NOR) from low-conductivity (178-832 μS cm^-1) water, the Ti₄O₇-REM system increased the kinetics rate constant by 4.3-34.0 times, thus decreasing the energy cost by 80.5-97.3% compared with a flow-by system. The rapid NOR removal was related to the enhanced direct electron transfer process in the Ti₄O₇-REM system, which allowed for higher resistance to HCO₃^- scavenging and a favorable reaction between NOR and the active sites. Meanwhile, this mechanism likely contributed to the less formation of inorganic chlorinated product, ClO₃^-, in the presence of Cl^-. Although organic chlorinated byproducts were not detected during NOR degradation in the Ti₄O₇-REM system, Cl^- influenced the speciation of the intermediates. A single-pass Ti₄O₇-REM system demonstrated 94-97% removal of trace antibiotics from real water samples in 30 s. The additional energy consumption (<0.02 kWh m^-3) using a Ti₄O₇-REM system only contributed to 5.0-6.4% of the total in a typical tertiary wastewater treatment plant. Based on the above results, we can conclude that the convection-enhanced REM technique is viable for the purification of low-conductivity natural waters.

Efficient degradation of antibiotics over Co(II)-doped Bi2MoO6 nanohybrid via the synergy of peroxymonosulfate activation and photocatalytic reaction under visible irradiation

Developing efficient photocatalysts based on the peroxymonosulfate (PMS) activation for effective degradation of threatening antibiotic contamination under visible light is still a challenging subject. Herein, a Co-doped Bi₂MoO₆ (CBMO) spherical crystals were synthesized via a facile hydrothermal method and used to degrade artificial antibiotic wastewater via PMS activation under visible light. The obtained 3 wt% Co-doped B₂MoO₆ (3CBMO) can effectively remove 98.95% of norfloxacin (NOF) within 40 min, 100% of tetracycline (TC) and metronidazole (MNZ) within 30 min. Compared with the contrasting catalysts, the superior catalytic activity of 3CBMO was attributed to the synergistic effect of photocatalytic and Co(II) activated PMS degradations. Quenching tests in combination with EPR measurements revealed that the hole (h⁺), sulfate (SO₄^-•) and hydroxyl (•OH) were the primary radicals all contributed to NOF degradation. The influences of initial concentration, catalyst dosage, PMS dosage and various interfering ions (NO₃^-, Cl^-, SO₄^2-, and HCO₃^-) on the degradation efficiency of NOF were systematically examined. Furthermore, possible degradation pathways of NOF were proposed by LC-MS. This novel 3CBMO catalyst might be a promising candidate for degradation of the main sources of antibiotic contamination in pharmaceutical wastewater.

Degradation of norfloxacin by MOF-derived lamellar carbon nanocomposites based on microwave-driven Fenton reaction: Improved Fe(III)/Fe(II) cycle

In this paper, a new type of iron-based magnetic nanoparticle material embedding mesoporous carbon (Fe@C₇₀₀) was prepared by simple pyrolysis of a MIL-101-Fe precursor and employed in the microwave-catalyzed degradation of norfloxacin (NOR) with the presence of H₂O₂. Characterization results showed successful anchoring of Fe⁰ nanoparticles in the carbon matrix. Under optimal treatment conditions (Calcination temperature = 700 °C, H₂O₂ dosage = 40 mM, MW power = 500 W, NOR dosage = 50 mg L^-1 and initial pH = 4), the degradation efficiency of NOR reached 95.22%. The catalyst showed exceptional degradation properties over a relatively wide pH range. The mesoporous carbon in the catalyst promoted electron transfer, enhanced the Fe(III)/Fe(II) cycle, increased contact between Fe⁰ and Fe²⁺ with H₂O₂, and accelerated the production of ·OH. Furthermore, density functional theory (DFT) calculations were used to predict the fragile active sites in NOR and to analyze the degradation pathway of NOR in combination with intermediates. Fe@C₇₀₀ retained good activity after 5 cycles. Reduced toxicity of intermediates predicted by T.E.S.T. compared to NOR. This study presented a new avenue for the rational design of Fe⁰-carbon composites as microwave-assisted Fenton-like catalysts for potential applications in wastewater treatment.

Enhancement strategies for efficient activation of persulfate by heterogeneous cobalt-containing catalysts: A review

As a clean and efficient technology for the degradation of organic contaminants, sulfate radical based advanced oxidation processes (SR-AOPs) have attracted more and more attention in the past decades. Cobalt is regarded as the most reactive and efficient non-noble metal catalyst for the activation of persulfate including peroxymonosulfate (PMS) and peroxydisulfate (PDS) to produce sulfate radicals. Due to the limitations of homogeneous catalytic systems, the heterogeneous cobalt-containing catalysts have been emerged and rapidly developed. Various strategies have been schemed to further enhance the activation ability of persulfate by heterogeneous cobalt-containing catalysts. This paper provides an overview on the recent progress in enhancement strategies for the highly efficient activation of persulfate by heterogeneous cobalt-containing catalysts. With a brief introduction on the chemistry and feature of sulfate radical reactions catalyzed by homogeneous Co²⁺/Co³⁺ species, the main strategies for enhancing persulfate activation by heterogeneous cobalt-containing catalysts are summarized, such as surface and morphology design, multiple reactive centers design, organic-inorganic hybrids and heterostructure composites. Future perspectives of heterogeneous SR-AOPs systems catalyzed by cobalt-containing catalysts are outlined.

Hierarchical Bi2MoO6 microsphere photocatalysts modified with polypyrrole conjugated polymer for efficient decontamination of organic pollutants

To effectively degrade organic pollutants in wastewater, visible-light-driven Bi₂MoO₆/PPy hierarchical heterogeneous photocatalysts were prepared through a solvothermal method and the following in-situ chemical oxidation polymerization. Compared with pristine Bi₂MoO₆ photocatalyst, the composite photocatalysts exhibited dramatically improved photocatalytic activity and photostability towards the degradation of methylene blue dye and tetracycline antibiotic. Bi₂MoO₆/PPy-80 sample achieved the highest photocatalytic degradation rates for methylene blue dye (93.6%) and tetracycline antibiotic (88.3%) under visible light irradiation. These two organic pollutants could be completely degraded into nontoxic small molecules according to in-depth HPLC-MS analysis of degradation products. The transient photocurrent responses, electrochemical impedance spectra, and photoluminescence spectra demonstrated that the introduction of PPy nanoparticles on the surface of Bi₂MoO₆ nanosheets could effectively accelerate the separation of photo-generated electron-hole pairs. Furthermore, a possible synergetic photocatalytic mechanism was put forward based on the electron spin resonance and XPS valence-band spectra. This work indicated that construction of hierarchical composite photocatalysts combining polypyrrole conductive polymer and Bi₂MoO₆ semiconductor in nanoscale is an efficient approach to improve photocatalytic activity for environmental remediation.

Construction of a Bi2MoO6/CoOx/Au system with a dual-channel charge transfer path for enhanced tetracycline degradation

The introduction of two cocatalysts CoOx and Au constructs dual carrier transfer channels, which improves the photogenerated electron–hole pairs separation efficiency and photocatalytic performance.

Magnetic Lu2Cu2O5-based ceramic nanostructured materials fabricated by a simple and green approach for an effective photocatalytic degradation of organic contamination

Designing and fabricating an efficient photocatalytic compound with an appropriate band gap to eliminate toxic contaminants is necessary to remediate the environment. This article presents the development of a new type of nanostructure, Lu₂Cu₂O₅–Lu₂O₃ nanocomposites to photo-catalytically degrade different kinds of toxic pollutants under sunlight. The oxide nanocomposites were fabricated via a quick and eco-friendly approach. In order to fabricate oxide nanostructures with appropriate features in terms of morphology and particle size, the effects of the kind of green reactant and its quantity were examined. Amylum was an appropriate and green reactant for the efficient synthesis of Lu₂Cu₂O₅–Lu₂O₃ nanobundles with the most organized morphology. The features of Lu₂Cu₂O₅-based nanostructures were carefully investigated utilizing multiple characterization methods. Then, the catalytic role of the fabricated nanobundles was evaluated for the removal of various kinds of toxic contaminants. The effects of the quantity of photocatalytic nanostructure, the concentration of the contaminant compound, and the type of light source in the catalytic degradation process were screened. The findings of this research demonstrated that utilizing 0.05 g of Lu₂Cu₂O₅–Lu₂O₃ nanobundles, 98.5% of the contaminant with a concentration of 10 ppm can be degraded in 2 h under ultraviolet light irradiation. The experimental results also certified that, during the photocatalytic pathway, superoxide radicals play a meaningful role in the elimination of toxic pollutants. To our knowledge, this is the first report of the fabrication of Lu₂Cu₂O₅–Lu₂O₃ nanocomposite through a facile and eco-friendly approach and its photocatalytic efficiency.

The synthesis of Lu₂Cu₂O₅–Lu₂O₃ nanocomposites via a simple auto-combustion approach and their excellent performance in the removal of organic pollutants under sunlight is presented for the first time.

Bi2WO6 quantum dots with oxygen vacancies combined with g-C3N4 for NO removal

Semiconductor materials have been used for photocatalytic degradation since they were discovered to be useful for photocatalytic degradation. Many studies have been researched to improve the efficiency of photocatalytic degradation. Among them, the introduction of vacancies to improve the photocatalytic efficiency has been verified to be a more feasible method. In this study, we combined two-dimensional (2D) graphite carbon nitride (g-C₃N₄) nanosheets with oxygen-containing vacancy zero-dimensional (0D) Bi₂WO₆ (BWO-OV) quantum dots to prepare 2D-0D g-C₃N₄/Bi₂WO₆-OV composite catalyst. The use of Bi₂WO₆ containing oxygen vacancies enhanced the absorption of light and increased the generation of photogenerated carriers. In addition, the formation of heterojunction and the vacancy structure of Bi₂WO₆ promote the life of photogenerated carriers and improve the catalytic effect of the catalyst. This structure shows high efficiency in removing low concentration (0.5 ppm) of nitric oxide (NO) at room temperature. The efficiency of the composite catalyst is much higher than g-C₃N₄ or BWO-OV, and better than the composite g-C₃N₄/Bi₂WO₆ without oxygen vacancies. When applied to NO removal, the composite g-C₃N₄/Bi₂WO₆-OV-10 showed the best catalytic activity which was up to 61.2%. At the same time, five cycles of experiments show that the material has excellent stability.

Integrating the Z-scheme heterojunction and hot electrons injection into a plasmonic-based Zn2In2S5/W18O49 composite induced improved molecular oxygen activation for photocatalytic degradation and antibacterial performance

The semiconductor-based photocatalysts with local surface plasmon resonance (LSPR) effect can extend light response to near-infrared region (NIR), as well as promote charge-carriers transfer, which provide a novel insight into designing light-driven photocatalyst with excellent photocatalytic performance. Here, we designed cost-effective wide-spectrum Zn₂In₂S₅/W₁₈O₄₉ composite with enhanced photocatalytic performance based on a dual-channel charge transfer pathway. Benefiting from the synergistic effect of Z-scheme heterostructure and unique LSPR effect, the interfacial charge-carriers transfer rate and light-absorbing ability of Zn₂In₂S₅/W₁₈O₄₉ were enhanced significantly under visible and NIR (vis-NIR) light irradiation. More reactive oxygen species (ROS) were formed by efficient molecular oxygen activation, which were the critical factors for both Escherichia coli (E. coli) photoinactivation and tetracycline (TC) photodegradation. The enhancement of molecular oxygen activation (MOA) ability was verified via quantitative analyses, which evaluated the amount of ROS through degrading nitrotetrazolium blue chloride (NBT) and p-phthalic acid (TA). By combining theoretical calculations with diverse experimental results, we proposed a credible photocatalytic reaction mechanism for antibiotic degradation and bacteria inactivation. This study develops a new insight into constructing promising photocatalysts with efficient photocatalytic activity in practical wastewater treatment.

Nanointerface engineering Z-scheme CuBiOS@CuBi2O4 heterojunction with OS interpenetration for enhancing photocatalytic hydrogen peroxide generation and accelerating chromium(VI) reduction

Designing a core-shell nanointerface is beneficial for enhancing the photocatalytic performance of hydrogen peroxide (H₂O₂) production. Hence, a direct Z-scheme one-dimensional (1 D) CuBiOS@CuBi₂O₄ nanorods with a core (oxide)-shell (sulfide) nanostructure and OS interpenetrated nanointerface was controllably synthesized through in-situ anion exchange. The formation of OS interpenetration at the heterogeneous interface with surface oxygen vacancies could effectively boost light absorption, reduce the interface contact resistance, facilitate band bending, and thus enhance charge separation and transfer as a "bridge". The as-prepared catalyst with tunable OS nanointerface greatly improved the photocatalytic performances in the H₂O₂ production with a yield of 201.9 μmol·L^-1 and the in-situ generated H₂O₂ effectively accelerated the reduction of chromium(VI) (Cr(VI), 95.4% within 15 min). The excellent performances were due to the OS interpenetration with rich oxygen vacancies and unique shell-core structure with intimate contact inter-doping nanointerface. Moreover, the photocatalytic mechanism was discussed in detail. This work might provide a guideline in the design and construction of high-performance catalysts with well-defined nanointerface for various applications.

Self-assembled ultrathin closely bonded 2D/2D heterojunction for enhanced visible-light-induced photocatalytic oxidation and reaction mechanism insights

Two-dimensional (2D) layered heterojunctions with a staggered band structure and unique interface properties exhibit promising application prospects in photocatalytic pollutant removal, water splitting, and CO₂ reduction. Ultrathin 2D/2D heterojunctions with a large specific surface area and a short migration path of the photogenerated charge always illustrate a better photocatalytic performance than non-ultrathin 2D heterojunction photocatalysts. In this study, a novel ultrathin 2D/2D heterojunction of the Bi₂O₂(OH)(NO₃)/BiOBr nanosheet composite (ultrathin BION/BiOBr) was in situ self-assembled though a cetyltrimethylammonium bromide assisted one-step hydrothermal method. Benefiting from the advantage of the unique ultrathin heterojunction structure, the ultrathin 2D/2D BION/BiOBr heterojunctions exhibit a greatly improved photocatalytic removal effect for multiple pollutants compared to the nanocrystal BION/BiOBr, pure BION. As a representative, the ultrathin 2D/2D Br-modified BION/BiOBr heterojunction shows an enhanced tetracycline degradation rate of 76%, which corresponded to a higher photodegradation rate constant of 0.01116 min^-1 when compared to pure BION (17%, 0.00161 min^-1) and nanocrystal BION/BiOBr (24%, 0.00223 min^-1) under visible-light irradiation for 2 h. A series of characterization and density functional theory calculations demonstrate the enhanced separation and migration efficiency of the photogenerated electrons and holes over the ultrathin heterojunction, facilitating the formation of oxidizing groups for the organic pollutant removal. The possible mechanism of the TC photodegradation and the possible photodegradation pathway are also investigated in detail. This work provides a feasible method for constructing ultrathin 2D/2D heterojunction materials for environmental purification.