Enhanced photocatalytic conversion of NOx with satisfactory selectivity of 3D-2D Bi4O5Br2-GO hierarchical structures via a facile microwave-assisted preparation

In Situ Construction of CuTCPP/Bi4O5Br2 Hybrids for Improved Photocatalytic CO2 and Cr(VI) Reduction

Global warming and heavy metal pollution pose tremendous challenges to human development, and photocatalysis is considered to be an effective strategy to solve these problems. Herein, copper(II) tetra (4-carboxyphenyl) porphyrin (CuTCPP) molecules were successfully in situ loaded onto Bi4O5Br2 by a hydrothermal approach. A series of experimental results show that the light absorption capacity and photogenerated carrier separation efficiency were synchronously enhanced after the construction of CuTCPP/Bi4O5Br2 composites. Hence, the as-prepared composites possess significantly improved photocatalytic ability for both CO2 and Cr(VI) reduction. Specifically, CuTCPP/Bi4O5Br2-2 achieves a CO generation rate of 17.14 μmol g-1 under 5 h irradiation, which is twice as high as that of Bi4O5Br2 (8.57 μmol g-1). Besides, the optimized CuTCPP/Bi4O5Br2-2 also exhibits a removal rate of 61.87% for Cr(VI) within 100 min under irradiation. Furthermore, the mechanism of CO2 and Cr(VI) photoreduction was explored by in situ Fourier transform infrared spectroscopy and capture experiments, respectively. This work can be a reference toward the construction of photocatalysts with high activity for solar energy conversion.

La2Ti2O7 nanosheets modified by Pt quantum dots for efficient NO removal avoiding NO2 secondary pollutant

Two-dimensional La₂Ti₂O₇ nanosheets with regular morphology and good dispersion were prepared by the hydrothermal method under a magnetic field. Zero-dimensional Pt quantum dots (Pt-QDs) were loaded on the La₂Ti₂O₇ nanosheets. The electron-hole separation and carrier transfer in the Pt-loaded La₂Ti₂O₇ nanosheets were significantly enhanced. The La₂Ti₂O₇ nanosheets loaded with 3 wt% Pt-QDs exhibit the largest NO removal efficiency of 51% and less than 3.2 ppb NO₂ intermediate pollutant in 30 min. The high photocatalytic ability was attributed to the surface plasmon resonance in Pt-QDs and the enhanced electron-hole separation. A large number of e^-, h⁺, •OH and •O₂^- active species were formed on the surface of Pt-loaded La₂Ti₂O₇ nanosheets under light irradiation. The conversion pathway from NO to NO₃^- was verified by the in situ diffuse reflectance infrared Fourier-transform spectroscopy and DFT calculation. This work supplies a feasible approach to responsive photocatalysts for efficient, stable, and selective NO removal avoiding the NO₂ secondary pollutant.

Bismuth-rich oxyhalide (Bi7O9I3-Bi4O5Br2) solid-solution photocatalysts for the degradation of phenolic compounds under visible light

HYPOTHESIS

The development of solid-solution photocatalysts with tunable bandgaps and band structures, which are significant factors that influence their photocatalytic properties, is crucial.

EXPERIMENTS

We fabricated a series of novel bismuth-rich Bi₇O₉I₃-Bi₄O₅Br₂ solid-solution photocatalysts with controlled I:Br molar ratios (denoted as B-I_xBr_1-x, x  = 0.2, 0.3, 0.4, or 0.6) via a rapid, facile, and energy-efficient microwave-heating route. The photodegradations under visible-light irradiation of the phenolic compounds (4-nitrophenol (4NP), 3-nitrophenol (3NP), and bisphenol A (BPA)), and the simultaneous photodegradation of BPA and rhodamine B (RhB) in a coexisting BPA - RhB system were investigated.

FINDINGS

The B-I_0.3Br_0.7 solid solution provided the highest photocatalytic activity toward 4NP degradation, with degradation rates 32 and 4 times higher than those of Bi₇O₉I₃ and Bi₄O₅Br₂, respectively. The photodegradation efficiency of the studied phenolic compounds followed the order BPA (97.5%) > 4NP (72.8%) > 3NP (27.5%). The RhB-sensitization mechanism significantly enhanced the photodegradation efficiency of BPA. Electrochemical measurements demonstrated the efficient separation and migration of charge carriers in the B-I_0.3Br_0.7 solid solution, which enhanced the photocatalytic activity. The B-I_0.3Br_0.7 solid solution effectively activated molecular oxygen to produce •O₂^-, which subsequently produced other reactive species, including H₂O₂ and •OH, as revealed by reactive-species trapping, nitroblue tetrazolium transformation, and o-tolidine oxidation experiments.

The Strengthened Photocatalytic NOx Removal of Composites Bi4O5Br2/BiPO4: The Efficient Regulation of Interface Carriers by Integrating a Wide-Bandgap Ornament

A series of binary composites Bi₄O₅Br₂/BiPO₄ (PBX) was fabricated through a simple mechanical ball milling protocol. Relevant microstructural, morphological, and optical properties were thoroughly analyzed via various techniques. The integration of both components was confirmed to produce heterojunction domains at the phase boundaries. Upon exposure to visible light irradiation, the as-achieved PBX series possessed the reinforced photocatalytic NO_x removal efficiencies and the weakened generation of toxic intermediate NO₂ in comparison to both bare components, chiefly attributed to the efficient transport and separation of carriers and boosted production of superoxide radicals (·O₂^-) through the combination of a wide-bandgap ornament BiPO₄ as an electron acceptor. In particular, the composite PB5 with the optimal phase composition exhibited the highest NO_x removal of 40% with the lowest NO₂ formation of 40 ppb among all tested candidates. According to the band structures' estimation and reactive species' detection, a reasonable mechanism was ultimately proposed to describe the migration of charge carriers and the enhancement of photocatalytic performance.

In-situ construction of step-scheme MoS2/Bi4O5Br2 heterojunction with improved photocatalytic activity of Rhodamine B degradation and disinfection

In this paper, a novel Step-scheme MoS₂/Bi₄O₅Br₂ heterojunction was fabricated through the in-situ mechanical agitation method and the photocatalytic activity of that was examined by the photocatalytic degradation Rhodamine B (RhB) and inactivation of E.coli under visible light irradiation (λ > 420 nm). The Step-scheme MoS₂/Bi₄O₅Br₂ heterojunctions displayed the enhanced photocatalytic ability compared to pure Bi₄O₅Br₂ and MoS₂ and the MoS₂/Bi₄O₅Br₂-3% (MS/BOB-3) heterojunction exhibited the strongest photocatalytic activity which can completely inactivate the 1 × 10⁷ cfu/mL with 180 min and degrade RhB (10 mg/L) with 24 min visible light irradiation, respectively. The photocatalytic mechanism of the MoS₂/Bi₄O₅Br₂ heterojunction is was attributed to the generated active species (h⁺, ·O₂^- and ·OH) which can effectively destroy RhB molecular and cell-membrane of bacterial as demonstrated by multiple techniques such as LC-MS and fluorescence stain. Additionally, characterization results disclosed that the transfer pathway of charge carriers of constructed MoS₂/Bi₄O₅Br₂ heterojunction followed the Step-scheme channel, which not only facilitated the separation and migration of the photo-generated charge carriers, but also improved the light absorption ability of the samples and resulting in the promoted photocatalytic performance of MoS₂/Bi₄O₅Br₂ heterojunction. This work paves a new idea to develop novel bismuth oxyhalide-based photocatalytic system for wastewater purification.

In situ construction of a C3N5 nanosheet/Bi2WO6 nanodot S-scheme heterojunction with enhanced structural defects for the efficient photocatalytic removal of tetracycline and Cr(vi)

A novel 2D/0D C3N5/Bi2WO6 S-scheme heterojunction with enhanced structural defects has been designed for the efficient elimination of pharmaceutical antibiotics and Cr(vi).

Facile construction of novel organic-inorganic tetra (4-carboxyphenyl) porphyrin/Bi2MoO6 heterojunction for tetracycline degradation: Performance, degradation pathways, intermediate toxicity analysis and mechanism insight

Developing durable photocatalysts with highly efficient antibiotics degradation is crucial for environment purification. Herein, tetra (4-carboxyphenyl) porphyrin (TCPP) was loaded onto the surface of Bi₂MoO₆ microspheres to gain hierarchical organic-inorganic TCPP/Bi₂MoO₆ (TCPP/BMO) heterojunctions via a facile impregnation strategy. The catalytic properties of these catalysts were comprehensively investigated through the photodegradation of tetracycline hydrochloride (TC) under visible light. Among all the TCPP/BMO heterojunctions, the highest photodegradation rate constant (0.0278 min^-1) was achieved with 0.25 wt% TCPP (TCPP/BMO-2), which was approximately 1.15 folds greater than that of pristine Bi₂MoO₆ and far superior to pure TCPP. The extremely high photocatalytic performance is attributed to the interfacial interaction between TCPP and Bi₂MoO₆, which favors the efficient separation of charge carriers and the enhancement of visible-light absorbance. TCPP/BMO-2 possesses high mineralization capability and good recycling performance. Photo-induced O₂^-, h⁺, and OH were mainly responsible for the degradation of TC. The degradation pathways of TC and toxicity of degradation intermediates were analyzed based on the intermediates detected by the high performance liquid chromatography-mass spectrometer (HPLC-MS) and the toxicity assessment by the quantitative structure-activity relationship (QSAR) prediction. A possible photocatalytic mechanism over TCPP/BMO is proposed. This work offers an insight in developing the porphyrin-based organic-inorganic heterojunctions for effectively remedying pharmaceutical wastewater.