Superhydrophobic conjugated microporous polymer-coated sponges: Synthesis and application for highly efficient oil/water separation and the recovery of palladium ions

Inside-out templating: A strategy to decorate helical carbon nanotubes and 2D MoS2 on ethyl cellulose sponge for enhanced oil adsorption and oil/water separation

Ethyl cellulose (EC)-based composite sponges were developed for oil spillage treatment. The EC sponge surface was decorated with helical carbon nanotubes (HCNTs) and molybdenum disulfide (MoS2) (1 phr) using the inside-out sugar templating method. The inside surface of a sugar cube was coated with HCNTs and MoS2. After filling the sugar cube pores with EC and the subsequent sugar leaching, the decorating materials presented on the sponge surface. The EC/HCNT/MoS2 sponge had a high level of oil removal based on its adsorption capacity (41.68 g/g), cycled adsorption (∼75-79 %), separation flux efficiency (∼85-95 %), and efficiency in oil/water emulsion separation (92-94 %). The sponge maintained adsorption capacity in acidic, basic, and salty conditions, adsorbed oil under water, and functioned as an oil/water separator in a continuous pump-assisted system. The compressive stress and Young's modulus of the EC sponge increased following its decoration using HCNTs and MoS2. The composite sponge was robust based on cycled compression and was thermally stable up to ∼120 οC. Based on the eco-friendliness of EC, the low loading of HCNTs and MoS2, and sponge versatility, the developed EC/HCNT/MoS2 sponge should be good candidate for use in sustainable oil adsorption and separation applications.

Biomass-derived carbon nano-onions for the effective elimination of organic pollutants and oils from water

Oil spillage and leakage of organic solvents have caused severe environmental and ecological damages. It is of great significance to develop a cost-efficient and green adsorbent material with high uptake efficiency to separate the oil-water mixture. In this work, biomass-derived CNOs were first time explored in the adsorption of organic pollutants and oils from water. Carbon nano-onions (CNOs) with hydrophobicity and oleophilicity were cost-effectively synthesized in an energy efficient flame pyrolysis process using flaxseed oil as a carbon source. The as-synthesized CNOs without any further surface modification have shown high adsorption efficiency in removing organic solvents and oils from the oil-water mixture. The CNOs could adsorb diverse organic solvents such as pyridine (36.81 mg g^-1), dichloromethane (90.95 mg mg^-1), aniline (76 mg mg^-1), toluene (64 mg mg^-1), chloroform (36.25 mg mg^-1), methanol (49.25 mg mg^-1), and ethanol (42.25 mg mg^-1). The uptake capacity for petrol and diesel over CNOs was observed at 36.68 mg mg^-1 and 58.1 mg mg^-1, respectively. The adsorption of pyridine followed pseudo-second-order kinetics and Langmuir's isotherm model. Moreover, the adsorption efficiency of CNOs towards the remediation of pyridine was almost similar in real-water samples when tested in tap water, dam water, groundwater, and lake water. Similarly, the practical applicability for the separation of petrol and diesel was also verified in the real sample (sea water) and has been proven to be excellent. By simple evaporation, the recovered CNOs can be reused for more than 5 cycles. CNOs exhibit the promising potential to be used in practical applications for oil-polluted water treatment.

Introducing Polar Groups in Porous Aromatic Framework for Achieving High Capacity of Organic Molecules and Enhanced Self-Cleaning Applications

Due to the frequent oil/organic solvent leakage, efficient oil/water separation has attracted extensive concern. However, conventional porous materials possess nonpolar building units, which reveal relatively weak affinity for polar organic molecules. Here, two different polarities of superhydrophobic porous aromatic frameworks (PAFs) were synthesized with respective orthoposition and paraposition C=O groups in the PAF linkers. The conjugated structure formed by a large number of alkynyl and benzene ring structures enabled porous and superhydrophobic quality of PAFs. After the successful preparation of the PAF solids, PAF powders were coated on polyester fabrics by a simple dip-coating method, which endowed the resulting polyester fabrics with superhydrophobicity, porosity, and excellent stability. Based on the unique structure, the oil/water separation efficiency of two superhydrophobic flexible fabrics was more than 90% for various organic solvents. Polar LNU-26 PAF showed better separation performance for the polar oils. This work takes the lead in adopting the polar groups as building units for the preparation of porous networks, which has great guiding significance for the construction of advanced oil/water separation materials.

Macroscale Conjugated Microporous Polymers: Controlling Versatile Functionalities Over Several Dimensions

Since discovered in 2007, conjugated microporous polymers (CMPs) have been developed for numerous applications including gas adsorption, sensing, organic and photoredox catalysis, energy storage, etc. While featuring abundant micropores, the structural rigidity derived from CMPs' stable π-conjugated skeleton leads to insolubility and thus poor processability, which severely limits their applicability, e.g., in CMP-based devices. Hence, the development of CMPs whose structure can not only be controlled on the micro- but also on the macroscale have attracted tremendous interest. In conventional synthesis procedures, CMPs are obtained as powders, but in recent years various bottom-up synthesis strategies have been developed, which yield CMPs as thin films on substrates or as hybrid materials, allowing to span length scales from individual conjugated monomers to micro-/macrostructures. This review surveys recent advances on the construction of CMPs into macroscale structures, including membranes, films, aerogels, sponges, and other architectures. The focus is to describe the underlying fabrication techniques and the implications which follow from the macroscale morphologies, involving new chemistry and physics in such materials for applications like molecular separation/filtration/adsorption, energy storage and conversion, photothermal transformation, sensing, or catalysis.

Mussel-Inspired and In Situ Polymerization-Modified Commercial Sponge for Efficient Crude Oil and Organic Solvent Adsorption

Oil spills and pollution of oily wastewater from the industrial field have not only caused serious economic losses but also imposed a huge threat to human beings. To solve these issues, the development of advanced materials and technologies for the purification of oily wastewater has garnered great concern and become a central topic. Hence, a superhydrophobic polyurethane (PU) sponge adsorbent is designed via mussel-inspired coatings by double bonds to PU sponge, followed by in situ polymerization with 1-hexadecene. The prepared PU sponge adsorbent (PU@DB@16ene sponge) showed outstanding mechanical properties including low density, high porosity, and compression recovery ability. Moreover, the prepared PU@DB@16ene sponge showed excellent adsorption of oils and organic solvents (up to 187 g g^-1) and exhibited superior recyclability. Particularly, when the PU@DB@16ene sponge was applied in the continuous and rapid separation of oils and organic solvents, it still showed desired properties at a rapid velocity of 8.3 L m^-3 s^-1. Additionally, the PU@DB@16ene sponge could not only adsorb organic solvents in laboratories but also adsorb crude oil and industrial waxy oil in practice. Therefore, we proposed a simple and convenient method to construct PU sponge absorbents with great application prospects, which would be highly valuable for crude oil and organic solvents cleanup.