Significant enhancement of photocatalytic H2 production simultaneous with dye degradation over Ni2P modified In2O3 nanocomposites

Interfacial tuning in FeP/ZnIn2S4 Ohm heterojunction: Enhanced photocatalytic hydrogen production via Zn-P charge bridging

Interfacial regulation is key to photocatalytic performance, yet modulating interfacial charge transfer in heterostructures remains challenging. Herein, a novel nanoflower-like FeP/ZnIn2S4 Ohm heterostructure is first designed, with Zn atoms in ZnIn2S4 (ZIS) acting as potential anchoring sites around P atoms, forming liganded Zn-P bonds. Combining 1D FeP nanowires and 2D ZIS nanosheets enhances the mobility of photogenerated electrons. The synergistic chain-type "electron pickup" mechanism of the Ohm heterojunction coupled with the Zn-P bond speeds up electron transport at the interface. The Ohm heterojunction initiates an internal electric field, creating a driving force to further transfer photogenerated electrons through the Zn-P rapid electron transport channel to FeP, which acts as a reservoir for active sites to release H2. The optimized FeP/ZIS demonstrates a remarkable H2 evolution rate at 4.36 mmol h-1 g-1, 3.6 times that of pristine ZIS. This work provides novel insights into optimizing photocarrier dynamics via interfacial microenvironment modulation.

Simultaneous Efficient Photocatalytic Hydrogen Evolution and Degradation of Dye Wastewater without Cocatalysts and Sacrificial Agents Based on g-C3N5 and Hybridized Ni-MOF Derivative-CdS-DETA

Inspired by energy conversion and waste reuse, hybridized Ni-MOF derivative-CdS-DETA/g-C3N5, a type-II heterojunction photocatalyst, is synthesized by a hydrothermal method for simultaneous and highly efficient photocatalytic degradation and hydrogen evolution in dye wastewater. Without the addition of cocatalysts and sacrificial agents, the optimal MOF-CD(2)/CN5 (i.e. Ni-MOF derivative-CdS-DETA (20 wt.%)/g-C3N5) exhibit good bifunctional catalytic activity, with a H2 evolution rate of 2974.4 µmol g-1 h-1 during the degradation of rhodamine B (RhB), and a removal rate of 99.97% for RhB. In the process of H2-evolution-only, triethanolamine is used as a sacrificial agent, exhibiting a high H2 evolution rate (19663.1 µmol g-1 h-1) in the absence of a cocatalyst, and outperforming most similar related materials (such as MOF/g-C3N5, MOF-CdS, CdS/g-C3N5). With the help of type-II heterojunction, holes are scavenged for the oxidative degradation of RhB, and electrons are used in the decomposition of water for H2 evolution during illumination. This work opens a new path for photocatalysts with dual functions of simultaneous efficient degradation and hydrogen evolution.

Progress on simultaneous photocatalytic degradation of pollutants and production of clean energy: A review

In the current era of severe energy and environmental crises, the need for efficient and sustainable methods to control pollution and promote resource recycling has become increasingly important. Photocatalytic degradation of pollutants and simultaneous production of clean energy is one such approach that has garnered significant attention in recent years. The principle of photocatalysis involves the development of efficient photocatalysts and the efficient utilization of solar energy. The use of organic contaminants can enhance the photocatalytic reactions, leading to the sustainable generation of clean energy. Herein, we provide a comprehensive review of the latest advances in the application of photocatalytic synergized clean energy production in the environmental field. This review highlights the latest developments and achievements in this field, highlighting the potential for this approach to revolutionize the way we approach environmental pollution control and resource recycling. The review focuses on (1) the mechanism of photocatalytic degradation and synergistic energy production, (2) photocatalysts and synthesis strategies, (3) photocatalytic carbon dioxide reduction, (4) pollutant degradation, and (5) hydrogen and electricity production. In addition, perspectives on key challenges and opportunities in photocatalysis and clean energy for future developments are proposed. This review provides a roadmap for future research directions and innovations of photocatalysis that could contribute to the development of more sustainable and cleaner energy solutions.

Efficient Visible-Light Photocatalytic Hydrogen Evolution over the In2O3@Ni2P Heterojunction of an In-Based Metal-Organic Framework

Although the engineering of visible-light-driven photocatalysts with appropriate bandgap structures is beneficial for generating hydrogen (H₂), the construction of heterojunctions and energy band matching are extremely challenging. In this study, In₂O₃@Ni₂P (IO@NP) heterojunctions are attained by annealing MIL-68(In) and combining the resulting material with NP via a simple hydrothermal method. Visible-light photocatalysis experiments validate that the optimized IO@NP heterojunction exhibits a dramatically improved H₂ release rate of 2485.5 μmol g^-1 h^-1 of 92.4 times higher than that of IO. Optical characterization reveals that the doping of IO with an NP component promotes the rapid separation of photo-induced carriers and enables the capture of visible light. Moreover, the interfacial effects of the IO@NP heterojunction and synergistic interaction between IO and NP that arises through their close contact mean that plentiful active centers are available to reactants. Notably, eosin Y (EY) acts as a sacrificial photosensitizer and has a significant effect on the rate of H₂ generation under visible light irradiation, which is an aspect that needs further improvement. Overall, this study describes a feasible approach for synthesizing promising IO-based heterojunctions for use in practical photocatalysis.

Constructing the Sulfur-Doped CdO@In2O3 Nanofibers Ternary Heterojunction for Efficient Photocatalytic Hydrogen Production

An S-doped CdO@In₂O₃ nanofiber was successfully designed by in-situ electrospinning along and subsequent calcination treatment. Under artificial sunlight illumination, the S/CdO@In₂O₃-25 displayed a superior photocatalytic hydrogen evolution rate of 4564.58 μmol·g^-1·h^-1, with approximately 22.0 and 1261.0-fold of those shown by the S/CdO and S/In₂O₃ samples, respectively. The experimental and theoretical analyses illustrate that the unique one-dimensional (1D) nanofiber morphology and rich oxygen vacancies optimized the electronic structure of the nanofibers and adsorption/desorption behaviors of reaction intermediates, contributing to the realization of the remarkable solar-to-H₂ conversion efficiencies. Moreover, the staggered band structure and intimate contact heterointerfaces facilitate the formation of a type-II double charge-transfer pathway, promoting the spatial separation of photoexcited charge carriers. These results could inform the design of other advanced catalyst materials for photocatalytic reactions.

Amino-functionalized NH2-MIL-125(Ti)-decorated hierarchical flowerlike Znln2S4 for boosted visible-light photocatalytic degradation

Developing novel heterojunction photocatalysts with visible-light response and remarkable photocatalytic activity have been verified to applying for the photodegradation of antibiotics in water environment. Herein, NH₂-MIL-125(Ti) was integrated with flowerlike ZnIn₂S₄ to construct NH₂-MIL-125(Ti)@ZnIn₂S₄ heterostructure using a one-pot solvothermal method. The photocatalytic performance was evaluated by the degradation of tetracycline (TC) under visible light illumination. The optimized NM(2%)@ZIS possesses a photodegradation rate (92.8%) and TOC removal efficiency (58.5%) superior to pristine components, which can be principally attributed to the positive cooperative effects of well-matched energy level positions, strong visible-light-harvesting capacity, and abundant coupling interfaces between the two. Moreover, the probable TC degradation mechanism was also clarified using the active species trapping experiments. This study inspires further design and construction of NH₂-MIL-125(Ti) and ZnIn₂S₄ based photocatalysts for effective removal of antibiotics in water environment.

Design and Preparation of Biomass-Derived Activated Carbon Loaded TiO2 Photocatalyst for Photocatalytic Degradation of Reactive Red 120 and Ofloxacin

The design and development of novel photocatalysts for treating toxic substances such as industrial waste, dyes, pesticides, and pharmaceutical wastes remain a challenging task even today. To this end, a biowaste pistachio-shell-derived activated carbon (AC) loaded TiO₂ (AC-TiO₂) nanocomposite was fabricated and effectively utilized towards the photocatalytic degradation of toxic azo dye Reactive Red 120 (RR 120) and ofloxacin (OFL) under UV-A light. The synthesized materials were characterized for their structural and surface morphology features through various spectroscopic and microscopic techniques, including high-resolution transmission electron microscope (HR-TEM), field emission scanning electron microscope (FE-SEM) along with energy dispersive spectra (EDS), diffuse reflectance spectra (DRS), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, photoluminescence spectra (PL) and BET surface area measurements. AC-TiO₂ shows enhanced photocatalytic activity compared to bare TiO₂ due to the change in the bandgap energy and effective charge separation. The degradation rate of dyes was affected by the bandgap of the semiconductor, which was the result of the deposition weight percentage of AC onto the TiO₂. The presence of AC influences the photocatalytic activity of AC-TiO₂ composite towards RR 120 and OFL degradation. The presence of heteroatoms-enriched AC enhances the charge mobility and suppresses the electron-hole recombination in AC-TiO₂ composite, which enhances the photocatalytic activity of the composite. The hybrid material AC-TiO₂ composite displayed a higher photocatalytic activity against Reactive Red 120 and ofloxacin. The stability of the AC-TiO₂ was tested against RR 120 dye degradation with multiple runs. GC-MS analyzed the degradation intermediates, and a suitable degradation pathway was also proposed. These results demonstrate that AC-TiO₂ composite could be effectively used as an ecofriendly, cost-effective, stable, and highly efficient photocatalyst.

Enhanced photocatalytic activity of a flower-like In2O3/ZnGa2O4:Cr heterojunction composite with long persisting luminescence

Flower-like In2O3/ZnGa2O4:Cr heterojunction composites not only have high photocatalytic efficiency for rhodamine B degradation, but also have a long persisting luminescence performance.

MOFs-Derived Fusiform In2 O3 Mesoporous Nanorods Anchored with Ultrafine CdZnS Nanoparticles for Boosting Visible-Light Photocatalytic Hydrogen Evolution

The development of efficient visible-light-driven photocatalysts is one of the critically important issues for solar hydrogen production. Herein, high-efficiency visible-light-driven In₂ O₃ /CdZnS hybrid photocatalysts are explored by a facile oil-bath method, in which ultrafine CdZnS nanoparticles are anchored on NH₂ -MIL-68-derived fusiform In₂ O₃ mesoporous nanorods. It is disclosed that the as-prepared In₂ O₃ /CdZnS hybrid photocatalysts exhibit enhanced visible-light harvesting, improves charges transfer and separation as well as abundant active sites. Correspondingly, their visible-light-driven H₂ production rate is significantly enhanced for more than 185 times to that of pristine In₂ O₃ nanorods, and superior to most of In₂ O₃ -based photocatalysts ever reported, representing their promising applications in advanced photocatalysts.